The document describes the Bernard Controls FQ Range failsafe electric actuators. The actuators ensure automatic valve opening or closing in the event of a power failure using compressed springs. When powered, the spring is held in place but will drive the valve to the safe position if power is lost. The actuators are reliable, require minimal maintenance, and are suitable for applications requiring valves to safely change position without external power. They are available in explosion-proof versions and offer configurable controls and sensors.
Most recent version of Kinetrol catalog including Blueline coating for foodservice applications. Kinetrol rotary vane actuators are used to operate or position ball, butterfly and plug valves, ventilation dampers and automatic doors. Uses also include movement and positioning of components during manufacture - in fact anything that needs to be turned through 90° or less, automatically or by remote control.
The document discusses AS interface bus communication for controlling on/off actuators serially. Up to 31 slave devices can connect to an AS interface bus and be powered and controlled by a master device. Under extended addressing, 62 slaves can connect but device capacitance limits applicability. The Kinetrol AS interface circuit allows actuators to connect to the bus for control, monitoring and power via a single two-wire cable according to the AS interface 2.1 specification.
Catalog: Inverter FR-E700 Mitsubishi
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
This document provides instructions for installing and operating Mitsubishi FR-E700 series inverters. It begins with product checking and identification of parts. Section 2 provides details on installation and wiring, including peripheral devices, removing covers, proper mounting, terminal connections and wiring diagrams. Section 3 covers driving the motor, including operation panel functions, monitoring output, starting and stopping in PU and external operation modes, and parameter lists. Section 4 is troubleshooting, with lists of faults, causes and remedies. Section 5 covers maintenance and inspections. Section 6 provides product specifications and outlines.
Webinar: Soluções inteligentes para acionamento de MOSFETs/IGBTs com família ...Embarcados
Objetivo do Webinar
Neste webinar a STMicroelectronics irá abordar :
- Apresentação das novas tecnologias de acionamento de mosfets/igbts – STDRIVE ;
- Listagem dos principais parâmetros em um gate driver para a performance otimizada ;
- Mostrar que a escolha correta do gate driver impacta diretamente na performance do seu conversor ;
- Soluções para acionamento de novas tecnologias de mosfets Silicon Carbide – SiC ;
- Soluções isoladas galvanicamente até 6kV – STGAP ;
- Placas de desenvolvimento para apoio ao projeto de conversores chaveados.
Convidados
Rogério Bueno
Marketing de produtos de conversão de energia na STMicroelectronic desde 2012. Graduado em engenharia elétrica em 2002 e pós-graduado em marketing em 2007. Mais de 23 anos de experiência com desenvolvimento de produtos eletrônicos.
Página do Webinar no Embarcados: https://www.embarcados.com.br/webinars/webinar-solucoes-inteligentes-para-acionamento-de-mosfets-igbts-com-familia-stdrive/
Catalog: Inverter Mitsubishi FR-D700 Global
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Mitsubishi inverter catalog-mitsubishi-inverter-fr-d700-global dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
The AZXBE8A8 analog servo drive is designed to drive brushless and brushed DC motors. It can operate in various modes including current, duty cycle, encoder velocity, and tachometer velocity modes. It has protection against overheating, overcurrent, and other faults. The drive requires a single DC power supply between 10-80V and is compatible with incremental encoders, hall sensors, and tachometers as feedback sources.
Most recent version of Kinetrol catalog including Blueline coating for foodservice applications. Kinetrol rotary vane actuators are used to operate or position ball, butterfly and plug valves, ventilation dampers and automatic doors. Uses also include movement and positioning of components during manufacture - in fact anything that needs to be turned through 90° or less, automatically or by remote control.
The document discusses AS interface bus communication for controlling on/off actuators serially. Up to 31 slave devices can connect to an AS interface bus and be powered and controlled by a master device. Under extended addressing, 62 slaves can connect but device capacitance limits applicability. The Kinetrol AS interface circuit allows actuators to connect to the bus for control, monitoring and power via a single two-wire cable according to the AS interface 2.1 specification.
Catalog: Inverter FR-E700 Mitsubishi
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
This document provides instructions for installing and operating Mitsubishi FR-E700 series inverters. It begins with product checking and identification of parts. Section 2 provides details on installation and wiring, including peripheral devices, removing covers, proper mounting, terminal connections and wiring diagrams. Section 3 covers driving the motor, including operation panel functions, monitoring output, starting and stopping in PU and external operation modes, and parameter lists. Section 4 is troubleshooting, with lists of faults, causes and remedies. Section 5 covers maintenance and inspections. Section 6 provides product specifications and outlines.
Webinar: Soluções inteligentes para acionamento de MOSFETs/IGBTs com família ...Embarcados
Objetivo do Webinar
Neste webinar a STMicroelectronics irá abordar :
- Apresentação das novas tecnologias de acionamento de mosfets/igbts – STDRIVE ;
- Listagem dos principais parâmetros em um gate driver para a performance otimizada ;
- Mostrar que a escolha correta do gate driver impacta diretamente na performance do seu conversor ;
- Soluções para acionamento de novas tecnologias de mosfets Silicon Carbide – SiC ;
- Soluções isoladas galvanicamente até 6kV – STGAP ;
- Placas de desenvolvimento para apoio ao projeto de conversores chaveados.
Convidados
Rogério Bueno
Marketing de produtos de conversão de energia na STMicroelectronic desde 2012. Graduado em engenharia elétrica em 2002 e pós-graduado em marketing em 2007. Mais de 23 anos de experiência com desenvolvimento de produtos eletrônicos.
Página do Webinar no Embarcados: https://www.embarcados.com.br/webinars/webinar-solucoes-inteligentes-para-acionamento-de-mosfets-igbts-com-familia-stdrive/
Catalog: Inverter Mitsubishi FR-D700 Global
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Mitsubishi inverter catalog-mitsubishi-inverter-fr-d700-global dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
The AZXBE8A8 analog servo drive is designed to drive brushless and brushed DC motors. It can operate in various modes including current, duty cycle, encoder velocity, and tachometer velocity modes. It has protection against overheating, overcurrent, and other faults. The drive requires a single DC power supply between 10-80V and is compatible with incremental encoders, hall sensors, and tachometers as feedback sources.
This document provides installation and configuration instructions for the TECNOLOGIC K series controller. It outlines the mounting requirements including dimensions, environmental conditions and panel thickness. It describes the input/output connections and wiring diagrams. The configuration procedure involves entering password-protected modes to modify parameter groups that control functions like control strategy, alarms and outputs. The factory default parameters can be restored for reconfiguration.
The AZXBH8A8 is an analog servo drive designed to drive brushless and brushed DC motors from 10-80VDC. It provides overcurrent, overvoltage, and thermal protection. The drive supports hall sensor or tachometer feedback for velocity control and operates in current, duty cycle, or velocity modes. It is designed for wide temperature ranges from -40°C to 85°C.
Far series outdoor auto circuit recloserAUTO RECLOSER
The document provides information on the FAR series pole mounted auto circuit recloser from Zhejiang Farady Electric Co., Ltd. Key details include:
- It uses epoxy resin solid insulation and a long life magnetic actuator, and integrates functions of control, protection, measurement, communication, fault detection and online monitoring.
- It is suitable for overhead distribution lines and substations from 11kV to 38kV. Rated currents range from 200A to 1600A and breaking capacities are from 12.5kA to 31.5kA.
- It has optional communication protocols, measurement functions, reclosing intervals and event recording capabilities.
The AZXBE15A8 is a PWM servo drive designed to drive brushless and brushed DC motors from 10-80VDC. It provides 15A of peak current and 7.5A of continuous current. The drive includes protections against overvoltage, undervoltage, overcurrent, and other faults. It can utilize encoder or tachometer feedback for velocity control and is designed for operation from -40°C to 85°C.
The AZXBH15A8 is a PWM servo drive designed to drive brushless and brushed DC motors at high switching frequencies. It can provide up to 15A of peak current and 7.5A of continuous current from a 10-80VDC power supply. The drive is protected against overvoltage, undervoltage, overcurrent, overheating and other faults. It supports hall sensor or tachometer feedback and operates in various modes including current and velocity control.
The AZ60A8DDC is a PWM servo drive designed to drive brush-type DC motors at high switching frequencies. It has a peak current of 60A, continuous current of 30A, and operates from 10-80VDC. The drive provides motor control and protection from overvoltage, undervoltage, overcurrent and more.
The document describes the Analog Servo Drive AZXBH6C20. It is designed to drive brushless DC motors at high switching frequencies and integrate directly into PCBs. It provides 6A of continuous current from 40-175VDC supply and is protected against over-voltage, over-current, and other faults. The drive supports Hall sensor or tachometer feedback and operates in various modes including current and velocity control. It has a wide operating temperature range from -40°C to 85°C.
This document provides information on FGRMU, a ring main unit for 12/24kV secondary distribution networks manufactured by Zhejiang Farady Electric Co., Ltd. FGRMU comes in 10 configurations and uses sealed stainless steel tanks for safety and reliability. It offers options for switch-fuse combination or circuit breaker protection. Technical specifications and dimensions are provided for standard module configurations including load break switches, vacuum switches, and cable connection modules.
The Vacon NXL AC drive is a compact and powerful drive for industrial and residential applications from 0.25 to 30 kW. It has an easy-to-use design with high protection classes and integrated components. Installation and programming are quick with instructions attached. The drive offers flexible control capabilities and features in a small size. It provides low motor noise and a wide range of control options.
This document is a service manual for the Victor Company of Japan's AX-V8000 audio/video control amplifier. It provides instructions on disassembling various components of the amplifier for repair purposes. Sections include removing covers, panels, and boards, disconnecting wiring connectors, and cautionary notes regarding safety-critical components. Detailed steps and diagrams are given to guide the disassembly process.
Catalog: Inverter Option-Mitsubishi Electric
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
The AZXBE6C20 analog servo drive is designed to drive brushless DC motors at high switching frequencies. It is fully protected against over-voltage, over-current and other faults. The drive can utilize encoder or tachometer feedback for velocity control and interfaces with digital controllers that have analog ±10V outputs. It is designed for wide temperature ranges and direct integration into PCBs.
The document describes a servo drive model AVB100C200 that is designed to drive brushless DC motors for vehicle applications. It can interface with digital controllers or operate independently, accepts various feedback types, and has adjustable parameters. The drive has overcurrent, overvoltage, and other protections. It is compliant with various safety and environmental standards.
The AZ40A8DDC is a PWM servo drive designed to drive DC motors at high switching frequencies. It can provide up to 40A of peak current and 20A of continuous current from a 10-80VDC power supply. The drive is compact and lightweight for direct integration into PCBs. It has full protection against over-voltage, under-voltage, over-current and other faults.
This document provides safety and service information for compact component systems. It contains 5 sections:
1) Safety precautions for the laser products and preventing static electricity damage.
2) Instructions for disassembly, adjustment, and descriptions of major integrated circuits.
3) Details on maintenance and replacement of the laser pickup, and flow of functional operations.
4) Cautions and testing procedures to ensure safety and isolate exposed metal parts when reassembled.
5) Warnings and positions of labels regarding invisible laser radiation.
The DQ111SE-H Series is a digital servo drive that controls brushed and brushless motors. It features fully digital control using space vector modulation for efficient motor control. It has interfaces for motor feedback, I/O, and SynqNet networking. The drive provides torque control of motors and integrated protection from overvoltage, undervoltage, and overcurrent.
The document discusses WEG electronic relays, including:
- RTW timing relays that switch outputs based on selected functions and times, available from 0.1 seconds to 150 hours.
- RPW monitoring relays for voltage monitoring to protect against electrical failures like phase loss and overvoltage.
- ERWT multifunction timing relays with 8 functions in a single relay adjustable from 0.1 seconds to 10 days.
- ERWM multifunction monitoring relays with 5 protection functions adjustable from 208-480V AC.
- RNW level relays for monitoring and automatic adjustment of liquid levels in reservoirs.
This document provides information on electrical products and services from Jarel Export for hazardous areas. It describes Jarel Export's specialization in hazardous area electrical products including lighting, control systems, power distribution, motor starters, and other equipment. Technical specifications and certifications are provided for several example products like bolted sockets, cable glands, luminaires, and motors.
This document summarizes the key specifications and components of the KYN28 indoor metal-clad withdrawable switchgear from Zhejiang Farady Powertech Co., Ltd. The switchgear is rated for voltages between 3.6-24kV and currents between 630-4000A. It has compartments for busbars, circuit breakers, cables, and low-voltage components. Main components include VS1 vacuum circuit breakers, VD4 circuit breakers, and current and voltage transformers. The switchgear meets various standards and can be used in environments from -15°C to 40°C and up to 1000 meters in altitude.
Hadar Hazardous Area (ATEX) Lighting ranges are suitable for explosive atmosphere environments and are certified to Zone 1, Ex e, Ex d and Zone 2 Ex n hazardous areas – fluorescent, recessed, portable, bulkhead, wellglass, floodlight and LED hazardous area lighting ranges.
The Hadar hazardous area lighting ranges comprises one of the most up to date and innovative lighting portfolios - suitable for explosive atmospheres the range of Hadar hazardous area lighting is certified to Zone 1 & 21, Ex e, Ex d, and Zone 2 & 22 Ex n.
The Hadar Lighting Ex e products feature the “End of Life” (EoL) protection circuit ballast according to DIN EN 61347-2-3 and IEC 60079-7 Ed.4.
Hadar Hazardous Area Lighting is a specialist manufacturer of hazardous area lighting for the oil, gas, petro-chemical, pharmaceutical, offshore and marine industries worldwide offering the design and production of lighting products for Zone 1, 2, 21 & 22, Gas and Dust - this includes ATEX and IEC Ex Explosion Proof Exe & Ex d Lighting ranges : fluorescent, recessed, helideck, LED floodlight, bulkhead and well glass.
This document provides information on Arteche's latching auxiliary relays. It discusses the range of products including general purpose latching relays, trip and lockout relays, and latching relays with coil overvoltage protection. The document also summarizes the key technical features and specifications of these relay models such as contact configurations, operating voltages, pick-up/release times, breaking capacities, and certifications to various industry standards. Arteche's latching relays are designed for applications in industries like electrical utilities, railways, and process control that require position memory, isolation, high speed operation, or high breaking capacity.
This document provides installation and configuration instructions for the TECNOLOGIC K series controller. It outlines the mounting requirements including dimensions, environmental conditions and panel thickness. It describes the input/output connections and wiring diagrams. The configuration procedure involves entering password-protected modes to modify parameter groups that control functions like control strategy, alarms and outputs. The factory default parameters can be restored for reconfiguration.
The AZXBH8A8 is an analog servo drive designed to drive brushless and brushed DC motors from 10-80VDC. It provides overcurrent, overvoltage, and thermal protection. The drive supports hall sensor or tachometer feedback for velocity control and operates in current, duty cycle, or velocity modes. It is designed for wide temperature ranges from -40°C to 85°C.
Far series outdoor auto circuit recloserAUTO RECLOSER
The document provides information on the FAR series pole mounted auto circuit recloser from Zhejiang Farady Electric Co., Ltd. Key details include:
- It uses epoxy resin solid insulation and a long life magnetic actuator, and integrates functions of control, protection, measurement, communication, fault detection and online monitoring.
- It is suitable for overhead distribution lines and substations from 11kV to 38kV. Rated currents range from 200A to 1600A and breaking capacities are from 12.5kA to 31.5kA.
- It has optional communication protocols, measurement functions, reclosing intervals and event recording capabilities.
The AZXBE15A8 is a PWM servo drive designed to drive brushless and brushed DC motors from 10-80VDC. It provides 15A of peak current and 7.5A of continuous current. The drive includes protections against overvoltage, undervoltage, overcurrent, and other faults. It can utilize encoder or tachometer feedback for velocity control and is designed for operation from -40°C to 85°C.
The AZXBH15A8 is a PWM servo drive designed to drive brushless and brushed DC motors at high switching frequencies. It can provide up to 15A of peak current and 7.5A of continuous current from a 10-80VDC power supply. The drive is protected against overvoltage, undervoltage, overcurrent, overheating and other faults. It supports hall sensor or tachometer feedback and operates in various modes including current and velocity control.
The AZ60A8DDC is a PWM servo drive designed to drive brush-type DC motors at high switching frequencies. It has a peak current of 60A, continuous current of 30A, and operates from 10-80VDC. The drive provides motor control and protection from overvoltage, undervoltage, overcurrent and more.
The document describes the Analog Servo Drive AZXBH6C20. It is designed to drive brushless DC motors at high switching frequencies and integrate directly into PCBs. It provides 6A of continuous current from 40-175VDC supply and is protected against over-voltage, over-current, and other faults. The drive supports Hall sensor or tachometer feedback and operates in various modes including current and velocity control. It has a wide operating temperature range from -40°C to 85°C.
This document provides information on FGRMU, a ring main unit for 12/24kV secondary distribution networks manufactured by Zhejiang Farady Electric Co., Ltd. FGRMU comes in 10 configurations and uses sealed stainless steel tanks for safety and reliability. It offers options for switch-fuse combination or circuit breaker protection. Technical specifications and dimensions are provided for standard module configurations including load break switches, vacuum switches, and cable connection modules.
The Vacon NXL AC drive is a compact and powerful drive for industrial and residential applications from 0.25 to 30 kW. It has an easy-to-use design with high protection classes and integrated components. Installation and programming are quick with instructions attached. The drive offers flexible control capabilities and features in a small size. It provides low motor noise and a wide range of control options.
This document is a service manual for the Victor Company of Japan's AX-V8000 audio/video control amplifier. It provides instructions on disassembling various components of the amplifier for repair purposes. Sections include removing covers, panels, and boards, disconnecting wiring connectors, and cautionary notes regarding safety-critical components. Detailed steps and diagrams are given to guide the disassembly process.
Catalog: Inverter Option-Mitsubishi Electric
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
The AZXBE6C20 analog servo drive is designed to drive brushless DC motors at high switching frequencies. It is fully protected against over-voltage, over-current and other faults. The drive can utilize encoder or tachometer feedback for velocity control and interfaces with digital controllers that have analog ±10V outputs. It is designed for wide temperature ranges and direct integration into PCBs.
The document describes a servo drive model AVB100C200 that is designed to drive brushless DC motors for vehicle applications. It can interface with digital controllers or operate independently, accepts various feedback types, and has adjustable parameters. The drive has overcurrent, overvoltage, and other protections. It is compliant with various safety and environmental standards.
The AZ40A8DDC is a PWM servo drive designed to drive DC motors at high switching frequencies. It can provide up to 40A of peak current and 20A of continuous current from a 10-80VDC power supply. The drive is compact and lightweight for direct integration into PCBs. It has full protection against over-voltage, under-voltage, over-current and other faults.
This document provides safety and service information for compact component systems. It contains 5 sections:
1) Safety precautions for the laser products and preventing static electricity damage.
2) Instructions for disassembly, adjustment, and descriptions of major integrated circuits.
3) Details on maintenance and replacement of the laser pickup, and flow of functional operations.
4) Cautions and testing procedures to ensure safety and isolate exposed metal parts when reassembled.
5) Warnings and positions of labels regarding invisible laser radiation.
The DQ111SE-H Series is a digital servo drive that controls brushed and brushless motors. It features fully digital control using space vector modulation for efficient motor control. It has interfaces for motor feedback, I/O, and SynqNet networking. The drive provides torque control of motors and integrated protection from overvoltage, undervoltage, and overcurrent.
The document discusses WEG electronic relays, including:
- RTW timing relays that switch outputs based on selected functions and times, available from 0.1 seconds to 150 hours.
- RPW monitoring relays for voltage monitoring to protect against electrical failures like phase loss and overvoltage.
- ERWT multifunction timing relays with 8 functions in a single relay adjustable from 0.1 seconds to 10 days.
- ERWM multifunction monitoring relays with 5 protection functions adjustable from 208-480V AC.
- RNW level relays for monitoring and automatic adjustment of liquid levels in reservoirs.
This document provides information on electrical products and services from Jarel Export for hazardous areas. It describes Jarel Export's specialization in hazardous area electrical products including lighting, control systems, power distribution, motor starters, and other equipment. Technical specifications and certifications are provided for several example products like bolted sockets, cable glands, luminaires, and motors.
This document summarizes the key specifications and components of the KYN28 indoor metal-clad withdrawable switchgear from Zhejiang Farady Powertech Co., Ltd. The switchgear is rated for voltages between 3.6-24kV and currents between 630-4000A. It has compartments for busbars, circuit breakers, cables, and low-voltage components. Main components include VS1 vacuum circuit breakers, VD4 circuit breakers, and current and voltage transformers. The switchgear meets various standards and can be used in environments from -15°C to 40°C and up to 1000 meters in altitude.
Hadar Hazardous Area (ATEX) Lighting ranges are suitable for explosive atmosphere environments and are certified to Zone 1, Ex e, Ex d and Zone 2 Ex n hazardous areas – fluorescent, recessed, portable, bulkhead, wellglass, floodlight and LED hazardous area lighting ranges.
The Hadar hazardous area lighting ranges comprises one of the most up to date and innovative lighting portfolios - suitable for explosive atmospheres the range of Hadar hazardous area lighting is certified to Zone 1 & 21, Ex e, Ex d, and Zone 2 & 22 Ex n.
The Hadar Lighting Ex e products feature the “End of Life” (EoL) protection circuit ballast according to DIN EN 61347-2-3 and IEC 60079-7 Ed.4.
Hadar Hazardous Area Lighting is a specialist manufacturer of hazardous area lighting for the oil, gas, petro-chemical, pharmaceutical, offshore and marine industries worldwide offering the design and production of lighting products for Zone 1, 2, 21 & 22, Gas and Dust - this includes ATEX and IEC Ex Explosion Proof Exe & Ex d Lighting ranges : fluorescent, recessed, helideck, LED floodlight, bulkhead and well glass.
This document provides information on Arteche's latching auxiliary relays. It discusses the range of products including general purpose latching relays, trip and lockout relays, and latching relays with coil overvoltage protection. The document also summarizes the key technical features and specifications of these relay models such as contact configurations, operating voltages, pick-up/release times, breaking capacities, and certifications to various industry standards. Arteche's latching relays are designed for applications in industries like electrical utilities, railways, and process control that require position memory, isolation, high speed operation, or high breaking capacity.
1) The document provides information on the HXGN15-36 series 36kV, 630A, 12.5kA-16kA air insulated SF6 ring main unit from Zhejiang Farady Electric Co., Ltd., including its specifications, components, structure, applications, standards, and operation.
2) The ring main unit uses SF6 gas as an insulating and interrupting medium and is comprised of modular units for different functions like incoming, outgoing, transformer protection, metering, and more.
3) It is designed for indoor installation in MV distribution systems and consumer substations up to 36kV with dimensions of 750mm to 1100mm wide, 2250mm high,
Hadar Lighting manufactures the HDL 100, a fluorescent luminaire for use in hazardous locations. Key features include simple installation, maintenance, and relamping. It has an aluminum powder coated reflector, silicone gaskets, and stainless steel external fasteners. Models include standard and emergency versions available in loop in/out or pole mount configurations. It is ATEX and IECEx certified for use in Zone 1 hazardous areas where gases may be present.
1) The document describes an air insulated SF6 ring main unit from 6kV to 36kV made by Zhejiang Farady Powertch. Co., Ltd.
2) The ring main unit has a simple structure, flexible operation, and reliable interlocking. It can be used for electric distribution automation and meets requirements for continuously variable markets.
3) The ring main unit consists of five main parts: a switch cubicle, bus-bar cubicle, connection cubicle, operation mechanism, and low voltage cubicle. It provides options for different components like circuit breakers and has applications in distribution switchboards.
The document summarizes an air insulated SF6 ring main unit from 6kV to 36kV. It has a simple structure and is suitable for electric distribution automation. It uses SF6 gas and has a modular design that allows for flexible operation, reliable interlocking, and convenient installation. The ring main unit meets various technical specifications and standards and can be used in transformer substations and distribution systems up to 36kV.
The document summarizes an air insulated SF6 ring main unit from 6kV to 36kV. It has a simple structure and is suitable for electric distribution automation. It uses SF6 gas and has a modular design that allows for flexible operation, reliable interlocking, and convenient installation. The ring main unit meets various technical specifications and standards and can be used in transformer substations and distribution systems up to 36kV.
The document discusses Rockwill Electric's RCW series of automatic circuit reclosers for overhead distribution lines and substations. The RCW reclosers are available for voltages up to 38kV and currents up to 1250A. They integrate control, protection, measurement, communication and fault detection functions. The reclosers offer various options for ratings, installation styles, relay protection curves, communication protocols, and reclosing settings. They are designed for harsh environments from -45°C to 85°C and feature vacuum interrupters, magnetic actuators, and IP65 protection class. Rockwill provides technical support and services for the reclosers.
This document provides specifications for the HDL 100 fluorescent luminaire from Hadar Lighting, including:
- It is available in polycarbonate enclosure and lamp envelope materials, with an aluminum powder coated reflector and silicone gaskets.
- It has protection ratings of II 2 G D Ex emb II T4/T5, Ex tD A21 IP66/67 T100°C and is ATEX and IECEx certified for use in hazardous locations.
- Standard models have options for 2x18W, 2x36W or 2x58W fluorescent lamps, and emergency versions are also available.
Rockwill Electric manufactures single phase vacuum reclosers for overhead distribution lines and substations ranging from 11kV to 38kV and 630A to 1250A. The RCW reclosers integrate control, protection, measurement, communication and fault detection functions. They can be customized with various relay protections, communication protocols, and reclosing settings. The reclosers use vacuum interrupters embedded in epoxy resin poles for high reliability over 20 years in harsh environments from -45°C to 85°C.
Low voltage switchgear ansi (distib. prim. bt)Moi Reyes
Eaton offers a range of low voltage switchgear designs that provide flexible solutions to optimize performance, enhance safety, and save space. Their Magnum DS switchgear comes in both front-accessible and rear-accessible models. The front-accessible design allows installation in tight spaces. Both designs provide high continuous current capacity, withstand short circuit ratings up to 100kA, and optional arc-resistant components tested to contain arcs safely. Eaton also provides optional pre-engineered automatic transfer and intelligent control packages to monitor and control switchgear operation remotely.
This document provides information on ATEX/IECEx certified PowerPlex panelboards for use in hazardous locations. Key details include:
- The panelboards are rated for Zone 1 and 2 hazardous areas and certified to ATEX and IECEx standards.
- They feature individual breaker housings to allow for easy servicing without downtime, and fiberglass reinforced polyester enclosures.
- The catalog number guide provides steps for selecting panel configuration including main breaker size, number of branch circuits, breaker ratings and options.
- Standard panel arrangements accommodate 1 to 72 branch circuits in various configurations depending on breaker pole size.
Mitsubishi inverter catalog-mitsubishi-inverter-fr-d700-global-160426015217Dien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi inverter catalog-mitsubishi-inverter-fr-d700-global-160426015217Dien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
60W 24V Waterproof LED Power supplies for outdoor lighting fixtures, led strips, LED Floodlights, LED Projectors.
IP67 Waterproof level, full sealed with silicon gel. used for wet and damp conditions.
The ZXDU68 W201 is a high frequency, switch-mode outdoor DC power system designed by ZTE for applications such as outdoor GSM/CDMA mobile stations. It has a maximum capacity of 200A with four hot-swappable 50A rectifier modules. The system provides high reliability, efficiency, electromagnetic compatibility, and easy maintenance while complying with international safety and EMC standards. Key features include LVD protection, remote monitoring and control, surge protection, and an IP55-rated enclosure suitable for outdoor use.
The document summarizes an inverter family that provides solutions for a wide range of applications. It includes inverters that offer superior driving performance, energy savings features, easy setup and maintenance, and compatibility with industrial and environmental standards. The inverters feature vector control, multiple ratings, PID control, safety functions, EMC filters to reduce noise, and optional components to improve performance and compliance. The family includes models suitable for applications like fans, pumps, packaging machines and more.
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEMHODECEDSIET
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...IJECEIAES
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, Serbia
3. Reliability
Security
UserFriendly
L
A
B
EL
BERNARD CONTROLS introduces the BC Premium label.
The BC Premium label is the guarantee of high performance, reliable and
innovative actuator solutions designed to sustain severe environmental
and operational conditions.
Decades of return of experience from very demanding applications such
as nuclear qualified valves actuation have shaped our technical orientations
and our commitment to quality and safety.
Moreover, BC Premium labeled products offer user-friendliness and
extremely low level of maintenance requirements.
Contents
Failsafeelectricactuators >
4
Mainfeatures >
6
Technicaldata >
8
Performances >
12
Dimensionaldrawings >
16
ISO5211mounting > 18
Wiringdiagram > 19
Failsafe Electric Actuator 3
L
AB
E
L
4. Failsafe electric actuators
For all quarter-turn applications, spring return FQ range
actuators ensure automatic opening or closing even without
any power supply.
When energized, the actuator operates the valve normally and at the same
time compresses the spring which is held in the loaded position by a solenoid
brake.
In case of power failure to the solenoid, the spring will drive the actuator and
valve to the safety position either open or closed. The associated dashpot
speed controls the spring action and allows a safe and shockfree operation of
the valve.
When the power supply is restored (no resetting of the spring is required), the
actuator is immediately available for normal operation.
In standard, the spring operates clockwise when viewed from the top. The
electric part is equipped with an asynchronous three-phase motor. Other
versions are available in single phase and direct current supply.
All applications where the loss of power supply requires automatically to put
the driven device in a safety position.
All applications where the risks are such, that driving the device to its safety
position must be possible at any time even in the absence of power supply.
Operatingprinciple
Applicationfields
Storage and distribution of gas and dangerous fluids
Refineries
Trucks loading arms
Fire protection systems
Chemical installation safety
Climate control and ventilation on hazardous areas
Tunnel ventilation
Forexample:
4
6. WhatisFailsafe ?
The activation of an emergency signal triggers the immediate
opening or closing of the backup device, without the need of any
external power source and using a full mechanical spring return.
This signal can be activated following:
•
An abnormal event (fire, overflow ...)
• An automatic control
• An operator’s action
• A lack of power supply
Main features
For all quarter turn applications, spring return FQ range
actuators ensure automatic opening or closing even without
any power supply.
• No periodic maintenance required.
•
Trouble free operation for years (the FQ system is not battery technology
based).
• Spring efficiency guaranteed over the full 90° travel.
•
Fast and shock-free operation of the valve during emergency closing / opening.
• Travel limit switches easy to set with a simple screw driver and unaffected by
mechanical vibrations effects.
• Easy access to electrical connections via a terminal strip.
FQ actuator is supplied complete with:
• Mechanical position indicator
• Adjustable quarter-turn mechanical stops
• 2 travel limit switches setting easy, with a simple screw driver
• Electrical connection to a terminal strip
• Emergency handwheel on all models (excepted the FQ04 and the FQ08)
FQ actuators are available as:
•
On-Off operation (complying with EN15714-2 Class A) and Inching/Positioning
(complying with EN15714-2 Class B): 30% motor duty rating. Up to 360 starts
per hour at peak of operation.
•
BC Modulating Class III (complying with EN15714-2 Class C) : 50% motor duty
rating. Up to 1 200 starts per hour at peak of operation.
Easytouse,maintenancefree
6
7. Enclosures
FQ actuators are weather-proof to IP67 and are also available as
explosion-proof according to international standards.
• Motor:
- 3PH 50 or 60 Hz
- 1PH 50 or 60 Hz
- DC versions
• EN15714-2 DUTY CLASSIFICTION
- On-Off : Class A
- Inching/Positioning : Class B
- Modulating : Class C
•
Advanced controls with local buttons
- INTEGRAL+ (On-Off)
- POSIGAM+ (Inching/Positioning Modulating)
• Extra limit switches
• Anticondensation heater resistor
• Position transmitters : 4-20mA or potentiometer
•
Specific voltage for solenoid brake supply
- 115V AC
- 230V AC
- 24V DC (other DC voltages on request)
• Fast spring return
• Clockwise or counterclockwise spring action
Possibleoptions
Failsafe Electric Actuator 7
L
AB
E
L
8. Torque range Quarter-turn, direct mounting from 40 to 500Nm
Actuator Duty Class On-Off (Class A), Inching/Positioning (Class B), Modulating (Class C)
Enclosure Cast aluminium
Waterproofness IP67
Programming FQ range is generally proposed with switch control (camblock + end-of-travel
switches).
INTEGRAL+ POSIGAM+ (See INTEGRAL+ catalogue) advanced controls are
also possible with separated control box.
Maximum distance between control box and actuator: 50m
Explosion proof ATEX
(option)
ATEX Directive 94/9/EC - CENELEC EN 50014, EN 50018
As standard: EEx d IIC T4 (option T5 or T6) - Ex II 2 G
Certificate : LCIE 02 ATEX 6209
Ambient temperature
operating range
Weatherproof models: -20°C to 70°C (-40°C as an option)
EEx d IIC T4 : -20°C to 60°C (-40°C as an option)
EEx d IIC T5 : -20°C to 60°C (-40°C as an option)
EEx d IIC T6 : -20°C to 50°C (-40°C as an option)
Explosion proof C.S.A.
(Canada USA)
(option)
NEMA 7 - NEMA 9 certified
C22-2, FM3600, FM3611 and FM3615 standards
Class I Group C, D div 12 (option Group B)
Class II Group E, F, G div 12
Certificate : 1061444
External corrosion protection Standard paint system: Zinc rich primer, epoxy undercoat and RAL5002 blue
protection polyurethane top coat.
Optional special anti-corrosion protection for marine, aggressive or abrasive
atmospheres.
All cover fasteners captive and stainless.
Motor technology TENV type (Totally Enclosed Non Ventilated).
Class F insulation.
Integrated thermal overload protection.
Motor duty rating S4 motor service (Intermittent periodic duty with startings) acc. to IEC 34-1
• S4 - 30% for On-Off Class A - up to 360 starts per hour.
• S4 - 30% for Inching/Positioning Class B - up to 360 starts per hour.
• S4 - 50% for Modulating Class III - up to 1,200 starts per hour.
Gearing Self-locking
Manual override Function available on FQ12, FQ18, FQ30 and FQ50.
Handwheel does not rotate during motor operation.
Padlockable clutch lever.
Spring return CW as standard, CCW on request (non reversible device)
Fast spring return in option
Output flange Flange comply with ISO 5211 (with optional socket/flange for FQ04 to FQ18)
Output drive Direct output drive on FQ04 to FQ18 (Removable socket ias an option).
Removable socket on FQ30 and FQ50.
Vibration Resistance 1g (9.8 m/s²) at 10-500 Hz
For higher vibration resistance, please contact us.
Lubrication Actuators are lubricated for product lifetime and do not require any specific
periodic maintenance
Mechanical
specifications
Motor
Enclosure
General
spec.
Technical data
Productspecifications
8
9. Electrical
specifications
Power supply Actuators are available for a wide range of power supplies:
• Single-phase, three-phase or DC voltages
• 50 or 60 Hz
• Specific voltages on request
Cable entries Weatherproof design :
- 2xM20
- 3xM20 (as an option)
Explosionproof design :
- 2x 3/4'' NPT
- 3x 3/4'' NPT (as an option)
Solenoid brake The solenoid rated power is 21 W. This solenoid is normally under permanent
power supply.
Need separated power supply. Nominal voltage:
• 230V AC for 230V or 400V AC actuators
• 115V AC for 115V or 460V AC actuators
• 24V DC for 24V DC actuators
Other possible voltages on request
Position sensors • Movement read directly on the main shaft (direct mechanical link)
• Adjustable camblock with 2 SPDT end-of-travel switches
• 2 extra position switches as an option
• Independent position transmitter (TAM or potentiometer) as an option
Failsafe Electric Actuator 9
L
AB
E
L
10. Models Two versions according to operating modes:
INTEGRAL+ for On-Off which includes :
• Terminal compartment
• Power contactors
• Logic control
• Configuration panel
• Signalling relays
• Local control selectors
POSIGAM+ for Class III positioning :
• All INTEGRAL+ features
• Positioner board
• Position feedback
Enclosure protection Separated FPi box (weatherproof design)
• Standard: IP67 / NEMA 4
Separated FPx box (explosionproof design)
• Standard: IP67 / EEx d IIC T6 - NEMA 7 / 9
On-off control • Isolated by opto-couplers
• Voltage: 10 to 250 V DC/AC
• Current: 10 mA at 24V
• Dry contacts (uses INTEGRAL+ auxiliary DC supply)
• Minimum pulse duration: 100ms
• Time of rotational direction change: 50ms or 200ms
Positioning control • Standard : Input signal 4-20 mA - Output signal 4-20 mA
• On request :Input signal 0-20 mA - Output signal 0-20 mA
• On request : Input signal 0-10 V - Output signal 0-20 mA
Signaling relays •
4 relays: 4 datas can be freely selected among a total of 16 available datas
(250VAC-5A max.)
• 1 fault relay
Cable entries Weatherproof design (with separated FPi control box option)
- 3xM20
- 2xM20 + 2xM25 (en option)
- 3xM20 + 4xM16(With single or redundant fieldbus option)
Explosionproof design (with separated FPx control box option)
- 2x 3/4'' NPT + 1x1'' NPT
EU conformity INTEGRAL+ / POSIGAM+ controls complying with:
• The 2004/108/EC electromagnetic compatibility
• The 2006/95/EC low voltage
•
The following harmonized standards: Generic emission standard-Industrial
environment EN 61000-6-4
Generic immunity standard - Industrial environment EN 61000-6-2.
Degrees of protection provided by enclosures (IP code) EN 60529
Vibration resistance 1g (9.8 m/s²) at 10-500 Hz
Fieldbus interface
(option)
Profibus DP (single or redundant)
• PROFIBUS-DP slave - RS 485
• Baudrate: autodetection
•
Total number of master and slave modules on the same line: 31 max. up to
99 with repeaters
• PROFIBUS operability approved by PNO (Profibus Nutzer Organisation)
• External power supply backup
Additional options • LED indication board (closed, open, power on)
• Additional 3 relays board
• Additional position transmitter isolated from the other output signals
Advanced
controls
(option)
ADDITIONAL
OPTIONS
10
16. Type A Ø B Square C h Weight
FQ04 386 Ø 84 17 19 25 kg
FQ08 396 Ø 117 22 24 30 kg
Type A B Ø C D Square E Ø F M Weight
FQ12 500 167 Ø 117 25 22 Ø 102 M10 40 kg
FQ18 518 185 Ø 130 31 25 Ø 78 M12 45 kg
FQ04FQ08
FQ12FQ18
Dimensional drawings
Square C
2 x 45°
Depth h
Connection
Stop screws
90° +/- 2°
Closed position
Position
indicator
B
Ø C
D
A
Ø F
Connection
Closed position
4
x
M
depth
:
20
Stop
screws
90°
+/-
2°
lockage
handwheel
clutch
Position
indicator Square E
4
x
M
depth
:
20
Square E
Please note: FQ04 to FQ18, ISO5211 mounting with optionnal socket. FQ04 to FQ50, plain socket in
standard and machined socket on request
16
18. PARALLEL SQUARE KEY FLAT
FQ04
FQ08
FQ12
FQ18
FQ30
FQ50
S
11 / 14 / 17
Ød7
14 / 18 / 22 / 28
S
11 / 14 / 17
S
11 / 14 / 17
Ød7
14 / 18 / 22 / 28
S
11 / 14 / 17
S
14 / 17 / 19 / 22
Ød7
18 / 22 / 28 / 36
S
14 / 17 / 19 / 22
S
14 / 17 / 19 / 22
Ød7
18 / 22 / 28 / 36
S
14 / 17 / 19 / 22
S
19 / 22 / 36
Ød7
22 / 28 / 30 / 40
S
19 / 22 / 36
Ø100 f8
Ø140
Ø175
4
x
M16
depth
25
=
F14
2
4
75
Ø102
Ø70
80
4
x
M10
=
F10
43
Ø102
Ø70
80
4
x
M10
=
F10
50
Ø55
60
Ø70
4
x
M8
=
F07
45°
51
Ø55
60
Ø70
4
x
M8
=
F07
45°
51
d
7
S S
ISO 5211 Mounting
Please note: FQ04 to FQ18, ISO5211 mounting with optionnal socket. FQ04 to FQ50, plain socket in standard and machined socket on
request
18
19. Standard wiring diagram
NOTA: 3Ph phase direct = Direction II
MOTOR
OPTIONAL ACCESSORIES
ACTUATOR SOLENOID OPERATED BRAKE
DC
+
-
24V DC 24V DC
Counterclockwise
Failsafe Electric Actuator 19
L
AB
E
L
20. Invest in Confidence
A105/06b
All
data
in
this
brochure
are
given
for
information
only
and
are
subject
to
change
without
notice.
B E R N A R D C O N T R O L S G R O U P
CORPORATE HEADQUARTERS
4 rue d’Arsonval - CS 70091 / 95505 Gonesse CEDEX France / Tel. : +33 (0)1 34 07 71 00 / Fax : +33 (0)1 34 07 71 01 / mail@bernardcontrols.com
More than 50 agents and distributors worldwide. Contact details on www.bernardcontrols.com
OPERATING UNITS
BELGIUM
BERNARD CONTROLS BENELUX
BRUSSELS
inquiry.belgium@bernardcontrols.com
inquiry.holland@bernardcontrols.com
Tel. +32 (0)2 343 41 22
CHINA
BERNARD CONTROLS CHINA
BEIJING
inquiry.china@bernardcontrols.com
Tel. +86 (0) 10 6789 2861
FRANCE
BERNARD CONTROLS FRANCE
GONESSE (PARIS)
inquiry.france@bernardcontrols.com
Tel. +33 (0)1 34 07 71 00
GERMANY
BERNARD CONTROLS DEUFRA
TROISDORF
inquiry.germany@bernardcontrols.com
Tel. +49 2241 9834 0
ITALY
BERNARD CONTROLS ITALIA
MILANO
inquiry.italy@bernardcontrols.com
Tel. +39 02 931 85 233
KOREA
BERNARD CONTROLS KOREA
SEOUL
inquiry.korea@bernardcontrols.com
Tel. +82 2 553 6957
MIDDLE-EAST
BERNARD CONTROLS MIDDLE-EAST
DUBAI - U.A.E.
inquiry.middleeast@bernardcontrols.com
Tel. +971 4 880 0660
CHENNAI - INDIA
inquiry.india@bernardcontrols.com
Tel. +971 4 880 0660
RUSSIA
BERNARD CONTROLS RUSSIA
MOSCOW
inquiry.russia@bernardcontrols.com
Tel. +7 (499) 251 06 54
SINGAPORE
BERNARD CONTROLS SINGAPORE
SINGAPORE
inquiry.singapore@bernardcontrols.com
Tel. +65 65 654 227
SPAIN
BERNARD CONTROLS SPAIN
MADRID
inquiry.spain@bernardcontrols.com
Tel. +34 91 30 41 139
UNITED STATES
BERNARD CONTROLS Inc
HOUSTON
inquiry.usa@bernardcontrols.com
Tel. +1 281 578 66 66