n the final webinar of our OH&S series, we are going to be gaining an understanding of the importance of workplace inspections. During this session, we will be looking at the different types of inspections and how they fit into your workplace. You will also learn how you can make workplace inspections fit into your daily business routine.
In this 30 minute session, we will cover:
- Understanding responsibility under the Health and Safety Act for conducting workplace inspections
- The benefits of conducting workplace inspections
- Where the Workplace Inspection Forms are posted and why
- The requirements of the Workplace Inspection Standard
- How to identify, document and communicate potential and actual hazards in the workplace
- Additional types of inspections
1. For audio, it is recommended you dial in
A copy of the slides + recording will be available post webinar
AUDIO: 1-877-668-4493
Access Code: 667 863 900
Event password: 1234
WebEx Support: 1-866-863-3910
A Business Guide to Workplace Inspections
December 6, 2012
Presented by: Kathleen Collins, Health and Safety Manager at
Drake International
2. Agenda
• Background on Inspections
• Legislative Requirements
• Types of Inspections
• Conducting an Inspection
• Reporting Results
• Due Diligence
3. Background on Workplace Inspections
• What is a catastrophe?
• Prevention
• Managing risk in your workplace
• How can inspections help?
3
4. Background on Workplace Inspections
Continued
Workplace party involvement:
• Managers
• Supervisor
• JHSC
• Worker
4
9. Background on Inspections
Recommendation and Control Resolutions:
• Resolutions are needed
• Needs a management or executive decision
• Implement new control
• Review new controls
9
10. Legislative Requirements
• Inspections are a legal requirement
• Globally it’s an expectation in all legislation
• Frequency and types of Inspections
– Application of Act
– Regulations
– Codes
– Best Practices
10
11. Legislative Requirements
Who Conducts a Workplace Inspection?
• Line workers
• Office workers
• Joint health and safety committee
• Supervisors
• Managers
• Team leads
• Employer
11
12. Types of Inspections
Planned Inspections
• Organized activities that happen on a schedule
Unplanned Inspections
• Forced inspection
• Identification of risk
12
13. Types of Inspections
Types of inspections that you can create and conduct
in your workplace to minimize risk:
• General Audit
• Pre-Start Inspection/Reviews
• Critical Parts Inventory
• Material Inventory
• Exposure Surveys
• Specific Hazards
13
14. Types of Inspections
General Audit:
Based on characteristics of your workplace you typically
will be looking at:
• People
• Material
• Equipment
• Environment
• Process
15. Types of Inspection
Pre-Start Review Inspections:
• Timely review
• Exposure to chemicals and other designated substances
• Removal of hazards or;
• Control of hazards
• The Pre-Start Health and Safety Review is intended to
ensure worker protection
15
16. Types of Inspections
Critical Parts Inventory:
Typically related to equipment and material flow. Critical
parts inventory needs to evaluate:
• Existing consumption
• System failure
• Estimate soft cost impact
• Vendor relations for in-stock improvement (Just-in-time
delivery and procurement process)
17. Types of Inspections
Material Inventory:
• Accounts for all overhead inventory
• Losses or additions
• Housing and storage
• Expiry dates
• Inventory removal
• Exposure surveys
18. Types of Inspections
Exposure Surveys
Looks at relationships between workers’ symptoms and
workplace including:
• Changes in routines and work site characteristics
• Details about known toxicant exposure
• Exposure to metals, dust, fibers, fumes, chemicals,
physical agents and biologic hazards
• Other persons affected
• Protective equipment use
19. Types of Inspections
Specific Hazards:
These inspections are reflective of:
- Acts
- Regulation
- Code
- Best practices
Example Investigation
21. Overview – Workplace Inspections
Key Takeaways:
• Legislative Requirements
• Process
• Documentation
• Types of Review
• Process for Controls
21
22. HEALTH AND SAFETY Q & A
For additional questions please email:
Kathleen: kcollins@na.drakeintl.com
22
23. Thank You for Attending
For Questions please contact Kathleen Collins
kcollins@na.drakeintl.com
416-216-1088
23
Editor's Notes
Typically there are a series of events that will create a catastrophe How do you prevent a catastrophe from occurringManaging Risk in your workplace will require you to evaluate and measure efficiencies. Conducting inspections assist you in evaluating and preventing risk
“Pull section from Legislation” Inspections are a legal requirementGlobally it’s an expectation in all legislationNothing is newFrequency and Types of Inspections conducted in the workplace will be dependent on application of Act, Regulations, Codes, and Best Practices. Dependent on your workplace.
Annual Management and/or JHSC is an overall audit on aspects of your business operation. Your criteria will be based on characteristics of your workplace you typically will be looking at:
That a timely professional review identifies specific hazards, or hazards associatedwith exposure to chemicals and other designated substances, in certainintended to ensure that such hazards are removed orcontrolled before the apparatus or process is started up. The Pre-Start Health andWhen the apparatus or process is put into production.The Pre-Start Health and Safety Review is intended to ensure worker protection.
Typically related to equipment and material flow critical parts inventory needs to evaluate. Understand existing consumption Calculate System failureEstimate soft cost impact of out-of-stock Vendor relations for instock improvement (Just-in-time delivery & procurement process. Part of preventative maintenance programs
Explain how possible relationships between worker's symptoms and worker's work environment are identified:changes in routines and work site characteristics details about known toxicant exposure known exposure to metals, dust, fibers, fumes, chemicals, physical agents, and biologic hazards other persons affected protective equipment use temporal patterns and activities
Who will be conducting the inspectionWhat will be inspectedWhere is the location of the inspectionWhen is inspection going to occur Why are you inspecting, does it have purpose and end result. How are you going to communicate your results and needs.