6.5.2voltmeter
•
0 likes•91 views
This document discusses basic electrical concepts. It introduces Ohm's Law, which states that resistance (R) equals voltage (V) divided by current (I). This formula represents the fundamental relationship between voltage, current, and resistance in an electrical circuit.
Report
Share
Report
Share
Recommended
2.1 Series Parallel
This document discusses parallel circuits and Ohm's law. It contains multiple repetitions of the phrase "Applied Electricity Two" and an image showing resistors R2 and R3 connected in parallel. The document also includes the equation for calculating current in a circuit where E is voltage and R is resistance.
10.2.3definitions
This one sentence document repeats the phrase "Applied Electricity Two" three times. It consists of a title or heading that is repeated with no further details or information provided.
6.1.2instruments
This one sentence document repeats the phrase "Applied Electricity Two" three times. It consists of three identical sentences that state the same information about applied electricity without providing any further details.
1.3.5bio
This one sentence document repeats the phrase "Applied Electricity Two" three times, providing no other context or information. It consists of three identical sentences that state the same phrase.
8.4.1capacitorinseries&Parallel
This document appears to be about applied electricity and consists of repeating the phrase "Applied Electricity Two" along with some symbols. It does not contain enough contextual information to generate a meaningful 3 sentence summary.
9.1.2energystored
This one sentence document appears to be the title "Applied Electricity Two" repeated twice without any further context or body. It does not provide enough information to generate a multi-sentence summary.
8.1.1hazards
This one sentence document appears to be the title "Applied Electricity Two" repeated twice without any further context or body. It does not provide enough information to generate a multi-sentence summary.
7.1.1capacitance
Electricity is the flow of electric charge. It is measured in amperes and is caused by an imbalance of electric charge between two points or regions. Common examples of electricity include static electricity from friction, current electricity from batteries and generators, and lightning.
Recommended
2.1 Series Parallel
This document discusses parallel circuits and Ohm's law. It contains multiple repetitions of the phrase "Applied Electricity Two" and an image showing resistors R2 and R3 connected in parallel. The document also includes the equation for calculating current in a circuit where E is voltage and R is resistance.
10.2.3definitions
This one sentence document repeats the phrase "Applied Electricity Two" three times. It consists of a title or heading that is repeated with no further details or information provided.
6.1.2instruments
This one sentence document repeats the phrase "Applied Electricity Two" three times. It consists of three identical sentences that state the same information about applied electricity without providing any further details.
1.3.5bio
This one sentence document repeats the phrase "Applied Electricity Two" three times, providing no other context or information. It consists of three identical sentences that state the same phrase.
8.4.1capacitorinseries&Parallel
This document appears to be about applied electricity and consists of repeating the phrase "Applied Electricity Two" along with some symbols. It does not contain enough contextual information to generate a meaningful 3 sentence summary.
9.1.2energystored
This one sentence document appears to be the title "Applied Electricity Two" repeated twice without any further context or body. It does not provide enough information to generate a multi-sentence summary.
8.1.1hazards
This one sentence document appears to be the title "Applied Electricity Two" repeated twice without any further context or body. It does not provide enough information to generate a multi-sentence summary.
7.1.1capacitance
Electricity is the flow of electric charge. It is measured in amperes and is caused by an imbalance of electric charge between two points or regions. Common examples of electricity include static electricity from friction, current electricity from batteries and generators, and lightning.
6.3.3ohmmeter
Electricity is the flow of electric charge. It is measured in amperes, with one ampere being one coulomb of charge flowing past a point per second. Electric circuits allow electricity to flow through a closed loop made of conductors and other components like resistors, capacitors, and inductors. Electric circuits are widely used to power all sorts of devices that we use in everyday life.
6.5.1wheatstonebridge
This one sentence document appears to be the title "Applied Electricity Two" repeated twice without any further context or body. It does not provide enough information to generate a multi-sentence summary.
10.2.1inductortypes
This one sentence document repeats the phrase "Applied Electricity Two" four times. It does not provide much context or information to summarize in 3 sentences or less.
9.1.1inductance
This one sentence document repeats the phrase "Applied Electricity Two" four times. It does not provide enough contextual information to generate a multi-sentence summary.
8.3.1codes
This document appears to be a list of the same phrase repeated multiple times. It contains the phrase "Applied Electricity Two" listed seven separate times, but does not provide any other context or information.
8.2.2effects
This one sentence document repeats the phrase "Applied Electricity Two" five times. It does not provide much contextual information or details beyond repeating this single phrase.
7.1.2symbols
This 5 sentence document repeats the phrase "Applied Electricity Two" in each sentence. It appears to be about the subject of applied electricity at a basic or introductory level, as the phrase "Applied Electricity Two" implies this could be a second course on the topic. The document does not provide much detail beyond repeating the same phrase in each sentence.
9.2.1lrcircuits
This document appears to be about the topic of applied electricity two and mentions emf. However, there is not enough contextual information provided to construct a meaningful 3 sentence summary. The document simply repeats the phrase "Applied Electricity Two" without any additional details about the content.
8.2.1factorstoconsider
This 3 sentence summary provides the high level information about the document:
The document discusses the topic of power factor in applied electricity. Power factor is a measurement used in alternating current circuits that indicates the efficiency of electrical power transmission and usage. The document likely examines power factor in more detail and how it relates to applied electricity.
6.3.2analogue
This document repeats the phrase "Applied Electricity Two" six times. It appears to be about the topic of applied electricity, possibly at a second level or part two, but provides no further details or context about its content beyond repeating that phrase multiple times.
8.3.3ceramicdisks
This one sentence document repeats the phrase "Applied Electricity Two" six times. It appears to be about the topic of applied electricity at a basic or introductory level, as the phrase "Applied Electricity Two" implies this could be a second level course on the subject. The repetitive nature of the short document does not provide much additional context or information beyond the topic and implied level.
1.5.1resistance
This document discusses applied electricity two and contains formulas for power (P=I2R) and heat energy (W=Pt). It repeats the phrase "Applied Electricity Two" multiple times without providing additional context or information.
3.1.1series
This document discusses basic concepts of applied electricity including total resistance in circuits, voltage, current, power, and calculating power for individual resistors in a circuit. Formulas shown include total resistance, voltage, current, power, and calculating total power by summing the power used by each individual resistor.
6.3.1movingcoil
This one sentence document repeats the phrase "Applied Electrical Two" three times. It consists of three identical sentences that state the same information about an applied electrical course numbered two. The document does not provide much additional context or details beyond repeating this phrase.
2.3.1light
This document discusses applied electricity and how voltage varies over time in an alternating current. Voltage fluctuates between positive and negative values in a sine wave pattern over time, rather than staying at a constant value. The voltage is zero at certain points and reaches peak positive and negative values before reversing direction and dropping to zero again as the cycle repeats.
111901 3110005-bee
This document contains an exam for a Basic Electrical Engineering course. It consists of 5 multiple choice questions with 3 parts each. Question 1 asks students to define terms related to alternating quantities, describe the operating principle of a transformer, and solve a circuit analysis problem. Question 2 asks about parts of a DC machine, auto transformers, and solving for voltage, current, and power in a sinusoidal AC circuit. The other questions cover topics like pipe earthing, induction motors, power factor, circuit breakers, rotating magnetic fields, and synchronous machines.
8.3.2difficult
This document discusses capacitance values. It lists two capacitors, one with a capacitance of 2 pF and another with a capacitance of 474K63 470 000 pF which equals 0.47 μF. The document is titled "Applied Electricity Two".
1.3.3power
This document repeats the phrase "Applied Electricity 2" seven times. It appears to be about the topic of applied electricity at a level two, but provides no further details or information beyond repeating the same phrase multiple times.
1.3.1magneticlevitation
This document repeats the phrase "Applied Electricity 2" seven times. It appears to be about the topic of applied electricity at a second level of learning, but provides no further details or context about the subject.
1.2.3convention
This document repeatedly discusses Applied Electricity Two over multiple lines without providing any further details. It consists solely of repeating the phrase "Applied Electricity Two" followed by an exclamation mark on the final line.
7.4.6 slip
This document describes how to calculate the rotor frequency of a two-pole, 50 Hz induction motor given the rotor speed of 2850 rpm. It shows that the slip speed is 3000 rpm, the slip percentage is 5%, and using the formula fs x %slip / 100, the rotor frequency is calculated to be 2.5 Hz.
4.2.1 Better Load
The document describes the circuits and loads for an electrical installation. It lists 19 circuits with various lighting, power outlet, motor, and appliance loads. It calculates the demand current in amps for each phase based on adding the full load or percentage of full load for each circuit based on rating and number of devices. The highest calculated demand is 153.25 amps on phase L2. With a 10% allowance for future additions, the total recommended maximum current is 168.575 amps.
More Related Content
What's hot
6.3.3ohmmeter
Electricity is the flow of electric charge. It is measured in amperes, with one ampere being one coulomb of charge flowing past a point per second. Electric circuits allow electricity to flow through a closed loop made of conductors and other components like resistors, capacitors, and inductors. Electric circuits are widely used to power all sorts of devices that we use in everyday life.
6.5.1wheatstonebridge
This one sentence document appears to be the title "Applied Electricity Two" repeated twice without any further context or body. It does not provide enough information to generate a multi-sentence summary.
10.2.1inductortypes
This one sentence document repeats the phrase "Applied Electricity Two" four times. It does not provide much context or information to summarize in 3 sentences or less.
9.1.1inductance
This one sentence document repeats the phrase "Applied Electricity Two" four times. It does not provide enough contextual information to generate a multi-sentence summary.
8.3.1codes
This document appears to be a list of the same phrase repeated multiple times. It contains the phrase "Applied Electricity Two" listed seven separate times, but does not provide any other context or information.
8.2.2effects
This one sentence document repeats the phrase "Applied Electricity Two" five times. It does not provide much contextual information or details beyond repeating this single phrase.
7.1.2symbols
This 5 sentence document repeats the phrase "Applied Electricity Two" in each sentence. It appears to be about the subject of applied electricity at a basic or introductory level, as the phrase "Applied Electricity Two" implies this could be a second course on the topic. The document does not provide much detail beyond repeating the same phrase in each sentence.
9.2.1lrcircuits
This document appears to be about the topic of applied electricity two and mentions emf. However, there is not enough contextual information provided to construct a meaningful 3 sentence summary. The document simply repeats the phrase "Applied Electricity Two" without any additional details about the content.
8.2.1factorstoconsider
This 3 sentence summary provides the high level information about the document:
The document discusses the topic of power factor in applied electricity. Power factor is a measurement used in alternating current circuits that indicates the efficiency of electrical power transmission and usage. The document likely examines power factor in more detail and how it relates to applied electricity.
6.3.2analogue
This document repeats the phrase "Applied Electricity Two" six times. It appears to be about the topic of applied electricity, possibly at a second level or part two, but provides no further details or context about its content beyond repeating that phrase multiple times.
8.3.3ceramicdisks
This one sentence document repeats the phrase "Applied Electricity Two" six times. It appears to be about the topic of applied electricity at a basic or introductory level, as the phrase "Applied Electricity Two" implies this could be a second level course on the subject. The repetitive nature of the short document does not provide much additional context or information beyond the topic and implied level.
1.5.1resistance
This document discusses applied electricity two and contains formulas for power (P=I2R) and heat energy (W=Pt). It repeats the phrase "Applied Electricity Two" multiple times without providing additional context or information.
3.1.1series
This document discusses basic concepts of applied electricity including total resistance in circuits, voltage, current, power, and calculating power for individual resistors in a circuit. Formulas shown include total resistance, voltage, current, power, and calculating total power by summing the power used by each individual resistor.
6.3.1movingcoil
This one sentence document repeats the phrase "Applied Electrical Two" three times. It consists of three identical sentences that state the same information about an applied electrical course numbered two. The document does not provide much additional context or details beyond repeating this phrase.
2.3.1light
This document discusses applied electricity and how voltage varies over time in an alternating current. Voltage fluctuates between positive and negative values in a sine wave pattern over time, rather than staying at a constant value. The voltage is zero at certain points and reaches peak positive and negative values before reversing direction and dropping to zero again as the cycle repeats.
111901 3110005-bee
This document contains an exam for a Basic Electrical Engineering course. It consists of 5 multiple choice questions with 3 parts each. Question 1 asks students to define terms related to alternating quantities, describe the operating principle of a transformer, and solve a circuit analysis problem. Question 2 asks about parts of a DC machine, auto transformers, and solving for voltage, current, and power in a sinusoidal AC circuit. The other questions cover topics like pipe earthing, induction motors, power factor, circuit breakers, rotating magnetic fields, and synchronous machines.
8.3.2difficult
This document discusses capacitance values. It lists two capacitors, one with a capacitance of 2 pF and another with a capacitance of 474K63 470 000 pF which equals 0.47 μF. The document is titled "Applied Electricity Two".
1.3.3power
This document repeats the phrase "Applied Electricity 2" seven times. It appears to be about the topic of applied electricity at a level two, but provides no further details or information beyond repeating the same phrase multiple times.
1.3.1magneticlevitation
This document repeats the phrase "Applied Electricity 2" seven times. It appears to be about the topic of applied electricity at a second level of learning, but provides no further details or context about the subject.
1.2.3convention
This document repeatedly discusses Applied Electricity Two over multiple lines without providing any further details. It consists solely of repeating the phrase "Applied Electricity Two" followed by an exclamation mark on the final line.
What's hot (20)
More from Talia Carbis
7.4.6 slip
This document describes how to calculate the rotor frequency of a two-pole, 50 Hz induction motor given the rotor speed of 2850 rpm. It shows that the slip speed is 3000 rpm, the slip percentage is 5%, and using the formula fs x %slip / 100, the rotor frequency is calculated to be 2.5 Hz.
4.2.1 Better Load
The document describes the circuits and loads for an electrical installation. It lists 19 circuits with various lighting, power outlet, motor, and appliance loads. It calculates the demand current in amps for each phase based on adding the full load or percentage of full load for each circuit based on rating and number of devices. The highest calculated demand is 153.25 amps on phase L2. With a 10% allowance for future additions, the total recommended maximum current is 168.575 amps.
4.1.13 Light Demand 3
This short document does not provide any substantive information to summarize in 3 sentences or less. It only notes that an explanation is not contained in a workbook, but provides no other context or details.
4.1.12 Light Demand 2 Table Part2
The document outlines the demand calculations for 19 different circuit load groups across 3 phases. It lists the load description, current allowance calculation method, and resulting demand current for each phase. The total demand current per phase is calculated at the bottom, with values of 143.8 amps for phase 1, 153.25 amps for phase 2, and 145.05 amps for phase 3.
4.1.11 Light Demand 2 Table
The document contains a table that calculates the current demand per phase for various circuit load groups in an electrical system. It lists 19 load groups categorized by letters A through D, describing each load. It shows the current allowance calculation method and resulting demand in amps for each phase. The total demand current calculated per phase is 143.8 amps for L1, 153.25 amps for L2, and 145.05 amps for L3.
4.1.10 Light Demand 2
This 3 sentence document provides instructions to refer to a specific table on a specific page of a particular standard for additional explanatory information not contained in the current workbook. The instructions direct the reader to Table C2 on page 359 of AS/NZA 3000:2007 for an explanation that is not included in the current document.
4.1.9 Light Demand 1
The document describes the functions of 19 electrical circuits in a building. It lists the types of equipment connected to each circuit such as fluorescent lighting, outlets, motors, and appliances. It also indicates which of the 3 electrical phases (L1, L2, L3) each circuit is connected to.
4.1.7 Example Domestic 3
The document calculates the electrical load of communal services in an apartment building. It shows that 24 lighting points will draw 240 watts and 6 10A sockets will draw up to 12A, for a total demand of 18A per phase. The total demand current per phase for communal services is 18A.
4.1.6 Example Domestic 2
The document calculates the electrical load and demand for 6 living units per phase. It lists the types of loads in each unit, the quantity and allowance per unit, and uses this to calculate the total demand current for phases L1, L2 and L3, which is 154.4 amps for each phase. The key loads included are lighting, power outlets, cooking ranges, air conditioners and hot water systems.
4.1.5 Example Domestic 1
This document discusses the number of living units per phase of a project. It calculates that for 18 total living units divided into 3 phases, there would be 6 living units per phase.
4.1.4 Step 2
This document summarizes the electrical load calculations for 11 circuits in a home. It lists the load type and description for each circuit, the current allowance per unit, and calculates the demand in amps for circuits 1-10. The largest demands are 17.7 amps for an air conditioner and 15 amps for an off-peak hot water system. The total calculated demand current for each phase is 40.7, 39.5, and 46.5 amps respectively.
4.1.3 Example Solution Three
The document calculates the electrical load and demand current for 11 circuits in a home. It groups the loads into categories like lighting, outlets, appliances, and assigns each a description, allowance, and demand calculation. The total demand current per phase is summarized at the bottom, with the highest draw of 46.5 amps on phase L3.
4.1.2 Example Three
The document outlines the functions and ratings of 12 electrical circuits. Circuit 1 provides power for 13 indoor lighting points. Circuit 10 powers an air conditioner rated at 23.6 amps per phase and can draw power from circuits L1, L2, and L3. Circuits 11a and 11b each power a controlled load hot water unit rated at 3.6 kW.
4.1.1 Example Single
This document calculates the total demand current for an electrical installation consisting of:
- 21 lighting points and 12 double sockets, contributing 5A and 15A respectively
- 15 single sockets contributing 10A
- A 6kW oven contributing 0.5A
- A 2.4kW water heater contributing 0.33A
The total demand current calculated is 45.83A.
5.4.4 LR Circuits
The document discusses the time constant and final current value for an RL circuit. It states that:
1) The time constant for the circuit is 0.17 seconds based on the given inductance and resistance values.
2) It will take approximately 0.85 seconds (5 time constants) for the current to reach its final value.
3) Using Ohm's law, the approximate final current after 0.85 seconds is 2 amps.
14.5.4 Example 1 Part 1
This document calculates the apparent power, power factor, and phase angle for a circuit. It finds that the apparent power is 2.308 kVA by multiplying the current of 9.615 by the voltage of 240. This apparent power is larger than the actual power of 1.5 kW, indicating a poor power factor of 0.65 or a 49.46 degree phase angle between the current and voltage.
14.1.2 TRA Power
Reactive power (Q) and true power (P) combine to form apparent power (S). Apparent power is the combination of true power, which is the usable energy in a circuit, and reactive power, which is stored energy that results from the combination of voltage and current out of phase.
14.5.8 Example 1 Part 5
This document calculates the true power, apparent power, and total current for a circuit. It determines that the true power is 1.5 kW, the apparent power is 1.5009 kVA, and the power factor is 0.99994. It then calculates that with an apparent power of 1.5009 kVA at 240 Volts, the total current would be 6.25 amps.
More from Talia Carbis (20)
Recently uploaded
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar KanvariaRHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama UniversityAkanksha trivedi rama nursing college kanpur.
Natural birth techniques are various type such as/ water birth , alexender method, hypnosis, bradley method, lamaze method etcHow to deliver Powerpoint Presentations.pptx
"How to make and deliver dynamic presentations by making it more interactive to captivate your audience attention"
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
Recently uploaded (20)
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory