5. As know, a virulent strain ofstaphylococcus aureus has arisen that.pdf

•

0 likes•4 views

5. As know, a virulent strain ofstaphylococcus aureus has arisen that is resistant to most you likely antibiotics. The strain (methicillin-resistant S aureus or MRSA) is commonly found in hospitals. Solution b) Function-driven approach - because in this methods sequecning of the microbial DNA from the soil sample is not required (as in sequence-driven approach) and detects only those genes having specifc function like antibiotic activity by allowing the expression of the gene in a compatable host cell like the E.coli using different screening assays. This method allows the detection of completely new genes having new and known functions. 1) Isolation of microbial cells from the soil sample. 2) Extraction and purification of total DNA contant. 3) Breaking down of purified DNA into fragments of different size. 4) DNA fragments are then cloned into a cloning vector and transformed into host cells (E.coli) resulting in a metagenomic library. 5) The transformed cells are then grown in a culture plate containing MRSA and incubated overnight. 6) Next day the culture plate are observed for inhibition zone. If present then the particular transformed cell are selected and grown seperately. 7) Check for the type of antibiotics..

Education

Similar to 5. As know, a virulent strain ofstaphylococcus aureus has arisen that.pdf

Tissue engineering 101

Munira Shahbuddin

Monoclonal antibody production

SrilaxmiMenon

605T_Phamaceutical biotecnology_unit 2.pptx

Akhilesh Kumar

Monoclonal Antibodies Hybridoma Technique

Iqbal Ahmed Rana

Genomic library

Sumit Sah

Recombination Technology

Zahid Azeem

In biology, cloning is the process of producing similar populations of genetically identical individuals that occurs in nature when organisms such as bacteria, insects or plants reproduce asexually. Cloning in biotechnology refers to processes used to create copies of DNA fragments (molecular cloning), cells (cell cloning), or organisms. The term also refers to the production of multiple copies of a product such as digital media or software.

Cloning

Amany Elsayed

Monoclonal antibody immunology

Hafiz M Waseem

e. coli

Rucha Joshi

hybridoma technology.pptx

TejaswiniAsawa

Monoclonal antibody production by hybridoma technology

Hasnat Tariq

Cultivation of Viruses

Islam Sarakbi

Monoclonal antibody.pptx

CHANDIGARH UNIVERSITY

Project Report on Monoclonal antibodies By Vanshika

VanshikaBeniwal

16. A. RECOMBINANT DNA.pptx

KiranChoudhari6

Metagenomics by microbiology dept. panjab university2018copy

deepankarshashni

Recombinant dna technology

Tapeshwar Yadav

Recombinant DNA technology

Tapeshwar Yadav

Monoclonal antibodies stem cell 2018

Ahmed Abdellatif

recombinent dna technology.pdf

BinteHawah1

Similar to 5. As know, a virulent strain ofstaphylococcus aureus has arisen that.pdf (20)

Tissue engineering 101

Monoclonal antibody production

605T_Phamaceutical biotecnology_unit 2.pptx

Monoclonal Antibodies Hybridoma Technique

Genomic library

Recombination Technology

Cloning

Monoclonal antibody immunology

e. coli

hybridoma technology.pptx

Monoclonal antibody production by hybridoma technology

Cultivation of Viruses

Monoclonal antibody.pptx

Project Report on Monoclonal antibodies By Vanshika

16. A. RECOMBINANT DNA.pptx

Metagenomics by microbiology dept. panjab university2018copy

Recombinant dna technology

Recombinant DNA technology

Monoclonal antibodies stem cell 2018

recombinent dna technology.pdf

More from FORTUNE2505

Why would a manager be concerned with bandwidth? How is bandwidth measured? Solution Bandwidth is defined as the network\'s capacity of transferring data and handling transmission. In organisations, in order to run business efficiently, managers are determined to transfer and receive information as quickly as possible without any delay or loss of valuable information. Bandwidth enable managers to measure the network performance, that is, how efficient the system is in sending and receiving data. Businesses, today, are majorly technology driven and therefore, any delay in transmitting or accepting important information may deeply affect the performance of the business. No manager would want poor bandwidth to have an impact on key business variables or loss of business opportunities. They do not want any restriction on the flow of data because of the slow transmission speed. Bandwidth is measured in terms of bit rate performance, that is, the information sent or received by bit per unit of time. Bandwidth is generally measured in the units of bps (bits per second), kbps (kilobits per second), mbps (megabits per second), gbps (gigabits per second) and tbps (terabits per second)..

Why would a manager be concerned with bandwidth How is bandwidth me.pdf

FORTUNE2505

Where would the Internet be today if the UNIX operating system did not exist? Solution Answer: The internet using today is actually runs through a linux server. Infact the internet is connected with the linux servers and router with other linux servers all over. So if there would have been no service of the UNIX , there would be no AIX , SOLARIS and LINUX. Now if there is no Linux , there is no android and the rest. I may say the scenerio would have been like a massive influence software designs and offcourse there might be the chances that Nokia would have still ruling the market. Cyber hackers would have been extinct. Window crashes would have been result in increasing growth of sucides in the world :p.

Where would the Internet be today if the UNIX operating system did n.pdf

FORTUNE2505

What do you understand by degrees of Data Abstraction? Solution While designing database we should start with abstract view of data environment and insert details as implementation comes closer.Degress of data abstraction will help in implementing different view of data. There 4 Levels of degrees of Data Abstraction: A}The External Model :It is available for end user.End user means people who use database application and modify data. B)The Conceptual Model:It considers all views of database and creates global view of database.It is represented using ER diagram. C)The Internal Model:It is formed after selection of database platform.It maps Conceptual Model to DBMS.It represents databse as seen by DBMS.It will to acheive logical independence. logical independence means changing internal model without affecting Conceptual Model. D)The Physical Model This is last and lowest layer of abstraction.It represents how data is stored in data disk or tapes.It depends on software and hardware.It allows to change Physical Model without affecting Internal Model.It is called physical independence..

What do you understand by degrees of Data AbstractionSolution.pdf

FORTUNE2505

validity. (The Case lulTTtuT 2. Discuss the Economics of Effective Management. List and discuss the first 4 items. L4- page Solution Effective management leads to use scare resources in a way so that the maximum economic benefit could be achieved by the whole organization. It indicates the minimum waste and the maximum returns. Required items: 1) Setting goal: Effective management sets goal of the organization considering all probable constraints. 2) Profit reorganization: The role of profit creates motivation; management creates possibilities (like new expansions, lowering costs, etc) so that profit could be increased in a substantial amount. 3) Incentives: Understanding of such is very important. Management wants to create more market for more incentives. 4) Markets: Understanding the true market (like middle-class customers, lower middle-class customers, etc) for which products to be sold is an important act of effective management. Creating opportunities in the market is the key to success..

validity. (The Case lulTTtuT 2. Discuss the Economics of Effective Ma.pdf

FORTUNE2505

Twitter had their IPO in 2013. Which of the following is not accurate The lockup refers to a portion of the IPO shares that cannot be sold in secondary market until months after the IPO date Twitter\'s IPO share price is set before shares of Twitter open for trading on secondary markets The amount of money that Twitter received from the IPO is determined by the number of IPO day O shares and the market price of those shares when Twitter shares closed for trading on the IPO Buyers of Twitter\'s stock become partial owners of the company. Solution Answer is A. THE reason is it is not ipo in true sense. Ipo is open to everyone not only few shareholders. Here owners etc are prohibited to sell so it is not portion of ipo.

Twitter had their IPO in 2013. Which of the following is not accurate.pdf

FORTUNE2505

Use C programming Make sure everything works only upload Solution #include float my_func(float x) { return (0.1*x*x*x)+1; } float approx_integral(float a, float b, int n) { int i; float s=0,y=0,h; h=(b-a)/n; for(i=1;i<=n-1;i++) { s=s+my_func(a+i*h); } y=(my_func(a)+my_func(b)+2*s)*h/2; return y; } int main() { float a,b; int n; printf(\"Integrate over [A,B] over N intervals. Input A, B, N: \ \"); scanf(\"%f %f %d\",&a,&b,&n); if(b.

Use C programmingMake sure everything works only upload.pdf

FORTUNE2505

The Adventures of Huckleberry Finn was published twenty years after the Civil War and ten years after Reconstruction. However, it takes place 1834 (or perhaps 1844, according to Huck). In what ways does Huck function as a metaphor for the adolescent America? Solution There is the nostalgic belief that America was built by a rugged individualism and people that took the \"road less travelled\" to forge their own future. Huck , for sure showcases this mythos. He goes against \"civilized\" Southern culture that, at that time, included institutionalized slavery and bondage. Huck made his way down the Mississippi River with an escaped slave. Huck developed his own social and moral code that often went against Southern society. He set a great examople for the adloscent America as he gave them hope that one needs to be tough as when the going gets tough , the tough gets going. One is the master of ones own fate.

The Adventures of Huckleberry Finn was published twenty years after .pdf

FORTUNE2505

Step 1 You work for Thunderduck Custom Tables Inc. This is the first month of operations. The company designs and manufactures specialty tables. Each table is specially customized for the customer. This month, you have been asked to develop and manufacture two new tables for customers. You will design and build the tables. This is a no nail, no screw, and no glue manufacturing ( no indirect materials used). You will be keeping track of the costs incurred to manufacture the tables using Job #1 Cost Sheet and Job #2 Cost Sheet. The cost of the direct materials that can be used to manufacture the table are as follows. These cost are on a per unit basis. Table Top $1,500.00 Table Leg $400.00 Drawer $350.00 The company uses a job order costing system and applies manufacturing overhead to jobs based on direct labor hours. The company estimates that there will be 12 direct labor hours worked during the month. The estimated manufacturing overhead cost for the month is: a. Factory supervisor salary per month $2,500.00 b. Rent for the factory per month $1,100.00 c. Depreciation of factory equipment per month $600.00 Total Estimated manufacturing overhead $4,200.00 What is the predetermined manufacturing overhead rate? Step 2 The first order you received was to manufacture a table using a table top and four legs. This is your Job #1. Step 3 The customer that has ordered Job #2, wants a table that is the same as Job #1, but wants to also add a drawer to the table. Step 4 The following is a list of transactions that need to be recorded for the company for activity in the month of December. Record those in the \"General Journal\" tab of the excel file using the proper format. Please use the following accounts: Accounts Receivables, Raw materials, Work in process, Finished goods, Accumulated depreciation, Accounts payable, Salaries and wages payable, Sales revenue, Manufacturing overhead, Cost of goods sold, Salaries and wages expense, Advertising expenses, and Depreciation expense. 1-Dec Raw Materials purchased on account, $15,000. 5-Dec All Raw Materials needed for Job #1 were requisitioned from the material storage for use during the month. Assume all materials are direct. (After you journalize this entry please enter the information into Job #1 Cost Sheet) 10-Dec The following employee costs were incurred but not paid during the month: There are three assembly employees that spend 2 hours each, $25 per hour to make the table for Job #1. (After you journalize this entry please enter the information into Job #1 Cost Sheet) Salary for supervisor of the factory $3,000. Administrative Salary $2,000. 15-Dec All Raw Materials needed for Job #2 were requisitioned from the material storage for use during the month. Assume all materials are direct. (After you journalize this entry please enter the information into Job #2 Cost Sheet) 16-Dec Rent for the month of December for the factory building incurred but not paid $1,100. 17-Dec Advertising costs incurred but n.

Step 1 You work for Thunderduck Custom Tables Inc. This is the first.pdf

FORTUNE2505

Researchers argue about whether Oldowan toolmakers were hunters or scavengers. What are the main arguments on each side of this debate? Solution Oldowan tools were made by late Australopithecus and early Homo. Homo habilis was named \"skillful\" because it was considered the earliest tool-using human ancestor. There are theories which show that they could be hunters or scavengers. The association of oldowan tools suggest their profession as hunters. There are also some theories suggesting they move carcasses from dangerous death sites showing they were scavengers..

Researchers argue about whether Oldowan toolmakers were hunters or s.pdf

FORTUNE2505

In Aristotle\'s \"Poetics\" he speaks of epics and tragedies. How do these apply in the story of Gilgamesh? Solution In the Poetics, Aristotle among many epic moments describes three important parts of the Greek tragedy and in turn famous art. The first being \"recognition\" which implies the realization of some truth, that often times (initially) appears to the hero as a form of ignorance. The second part of the tragedy is \"reversal\" where by some form of journey, the hero finds that recognition is kept in a kind of 180 degree turn where formerly held truths are in reality versions of ignorance or that former versions of ignorance turn out to be visions for the future. The third part of epic tragedy is the \"tragic flaw.\" This term is a bit difficult to catch. In most cases, it implies that one\'s true character, the nature of one\'s soul or daemon or \"divine spirit.\" It is not about being evil. It refers to unforeseen events that arrive in mass when a hero fails to follow his true character or when one\'s character causes a mistake in judgment. the second part of the tragedy has some resemblense in the story of Gilgamesh The Epic of Gilgamesh shows us the reality of recognition and reversal--for example, the gardener is transformed into a mole. And more importantly we see our relation with nature depicted as a reversal, when Enkidu is transformed from a wild beast into a domesticated man , who knows the trappings of civilization and culture.

In Aristotles Poetics he speaks of epics and tragedies. How do.pdf

FORTUNE2505

Name the type of chemical messenger is released from the axon terminal of a neuron and directly communicates with other cells? Which type of chemical messenger, when released, binds to receptors on the same cell that released the chemical messenger? Lipophilic chemical messengers can cross the plasma membrane, true/false? Name 2 physiological processes (cell responses) that are regulated by cell signaling. \'Receptor-ligand binding is specific\' What does this phrase mean? Solution Please find the answers below: Part 1: Neurotransmitter (any chemical or bio-molecule released from the neuron terminal which transmite information from one neuron to another and help in communication) Part 2: Autocrine chemicals (Autocrine chemicals and transmitters are those biomolecules which are secreted by the cells and receptors for this ligand are present on the same cell. This chemical/ligand is then internalized by teh same cell. Examples include TNF alpha, interleukins etc.) Part 3: True (The plasma membrane is a lipid bilayer by structure. Thus, only lipophilic substances can pass through the membrane easily without being repulsed by it) Part 4: Following intracellular signalling cascades and physiological processes are performed by cell signalling: Part 5: Receptor-ligand binding is specific in nature by the manner that every receptor has a specific ligand which binds onto it. This ligand is structurally compatible to its receptor in the same manner as the substrate is specific for the enzyme. Thus, only a ligand can bind to its receptor and activate the intracellular signalling..

Name the type of chemical messenger is released from the axon termina.pdf

FORTUNE2505

Marilee Jones, the former dean of admissions of the Massachusetts Institute of Technology (MIT), resigned after twenty-eight years as an administrator in the admissions office. The dean for undergraduate education received information questioning Ms. Jones’s academic credentials. Her résumé, used when she was hired by MIT, indicated that she had degrees from Albany Medical College, Union College, and Rensselaer Polytechnic Institute. In fact, she had no degrees from any of these schools or from anywhere else. She had attended Rensselaer Polytechnic as a part-time non-matriculated student during the 1974–75 school year, but the other institutions had no record of any attendance at their schools. When Ms. Jones arrived at MIT for her entry-level position in 1979, a degree was probably not required. However, she did progress through the ranks of the admissions office, and, in 1997, she was appointed dean of admissions. She explained that she wanted to disclose her lack of degrees at that point but that she had gone on for so long that she did not know how to come clean with the truth. Point to the initial decision, why it was flawed, why Ms. Jones made that decision, and what had to be done after that as a result of that choice. Is there a rationale for allowing Marilee Jones for retaining her position after this discovery. Are there resume \"misstatements\" that should not lead to termination? What would these be? Solution Answer: After realisnig that she is at guilt it is better for her to quit her position and continue to work as a teacher which is a noble profession. Taking the responsibility for her mis statements is one of the way to make amends in the wrongs that was not committed knowingly..

Marilee Jones, the former dean of admissions of the Massachusetts In.pdf

FORTUNE2505

Know how the complement of mRNAs in a cell can be assayed (in plants) Solution Messenger RNA (mRNA) maturation in eukaryotic cells requires the formation of the 3 end, which includes two tightly coupled steps: the committing cleavage reaction that requires both correct cis-element signals and cleavage complex formation, and the polyadenylation step that adds a polyadenosine [poly(A)] tract to the newly generated 3 end. An in vitro biochemical assay plays a critical role in studying this process. The lack of such an assay system in plants hampered the study of plant mRNA 3-end formation for the last two decades. Gene expression in eukaryotes requires the transcription of DNA into mRNA in the nucleus. The newly transcribed pre-mRNAs undergo extensive processing, such as 5-end capping and removal of introns and 3-end polyadenylation before they are ready to be transported to the cytoplasm for translation. Among pre-mRNA processing events, 3-end formation and polyadenylation are known to regulate transcription termination, affect intron splicing, promote mRNA transportation and translation initiation, and protect mature mRNAs from unregulated degradation. In addition, alternative polyadenylation show that more than half of plant and mammal genes can be alternatively processed at different locations, resulting in distinct mature mRNAs from the same pre-mRNA transcripts . Due to its tight connections to transcription, translation, and RNA decay, mRNA 3-end polyadenylation appears to act as a hub for fine tuning gene expression and forming a regulation network. The 3-end processing of mRNA includes two coupled steps: cleavage at a specific site at the 3- UTR and an addition of a polyadenosine [poly(A)] tract to the newly formed 3 end. The biochemical process of polyadenylation is relatively well studied in mammals and yeast (Saccharomyces cerevisiae). The 3-end cleavage and polyadenylation reaction is guided by sequence elements (cis-elements) in pre-mRNA, which are recognized by a protein complex that carries out enzymatic cleavage and polyadenylation reaction at a specific site. This apparently simple process directly involves several cis-elements, as well as more than 14 protein factors in mammals. These 14 protein factors can be divided into several sub complexes, such as cleavage and polyadenylation specificity factor (CPSF), cleavage stimulation factor, cleavage factor I, and cleavage factor II. Meanwhile, poly(A) polymerase (PAP), poly(A) binding protein-II, symplekin, and C-terminal domain of the RNA polymerase II have also been found to be necessary in this 3-end processing complex . In yeast, a similar set of proteins, albeit named differently, were also identified to be important for 3-end processing . The involvement of over 80 proteins that form a complex with functional poly(A) signals . The functionality of this larger collection of associated proteins in polyadenylation, however, remains to be confirmed. The mechanisms of mRNA 3-end .

Know how the complement of mRNAs in a cell can be assayed (in plants.pdf

FORTUNE2505

In Module 5 the you are here slide indicates we are currently in.pdf

FORTUNE2505

Identify the role you believe mobile devices have on email investigations. Discuss and provide an example of the added challenges that have been introduced based on the proliferation of mobile device technologies and more organizations embracing BYOD solutions and implementations. Solution Lost and taken mobile devices Lost or taken knowledge Lack of compliance with security rules Document leak Unmanaged devices Device management on work networks.

Identify the role you believe mobile devices have on email investiga.pdf

FORTUNE2505

I need to implement in c++ this non-List member function: void printList(List& theList, bool forward) is a non-member function that prints a list either forwards (by default -- from head to tail) when forward is true, or backwards (from tail to head) when forward is false. You must use your ListItr class to implement this function. I attached my ListItr class I\'m not sure how to implement this method help. This is one of the classes needed to implement a doubly linked list Solution #ifndef LISTITR_H #define LISTITR_H #include #include \"stdafx.h\" // This is the content of the .h file, which is where the declarations go class ListNode{ public: ListNode* previous; int value; ListNode* next; ListNode(); }; class ListItr { public: ListNode* current; ListItr(ListNode* theNode); void Insert(int value) const; bool isPastEnd() const; bool isPastBeginning() const; void moveForward() ; void moveBackward() ; int retrieve() const; }; // This is the end of the header guard #endif // stdafx.h : include file for standard system include files, // or project specific include files that are used frequently, but // are changed infrequently // #pragma once #include \"targetver.h\" #include #include #include #include \"ListItr.h\" // TODO: reference additional headers your program requires here #include \"stdafx.h\" /* for this first you need a class named ListNode */ using namespace std; ListNode::ListNode() { previous=NULL; next=NULL; } ListItr:: ListItr(ListNode* theNode){ current = theNode; } bool ListItr:: isPastEnd() const{ if (current->next==NULL) return true; else return false; } bool ListItr:: isPastBeginning() const{ if (current->previous==NULL) return true; else return false; } void ListItr:: moveForward(){ if (!isPastEnd()) current=current->next; //cout << current; } void ListItr:: moveBackward(){ if (!isPastBeginning()) current=current->previous; //cout << current; } int ListItr:: retrieve() const{ return current->value; } void ListItr::Insert(int value) const{ ListNode* theNode; theNode->value=value; while(!isPastEnd()) { moveForward(); }//loop ends when current-> next is null current->next = theNode;//inserts value at the end of the list theNode->previous=current;//defines previous pointer theNode->next=NULL;//defines next pointer } //Startnode is the first node of the list void printList(ListNode* Startnode, bool forward){ // if(forward==true){ // moveForward(); // } // if(forward == false){ // moveBackward(); // } //object of class ListItr ListItr list(Startnode); if(forward==true) { while(!list.isPastEnd()) { cout<.

I need to implement in c++ this non-List member function void print.pdf

FORTUNE2505

I have another assignment due for an advance java programming class that I do not understand how to do. I don\'t know how to implement the comparable interface and sort the cards from lowest to highest based on suit within rank. And I also dont understand how I am suppose to add a static nested class that implements the comparator interface and then sort the cards lowest to highest based on rank within a suit. Then I have to add the different buttons and I am not sure which class that these buttons are to be placed in. The buttons I have to add are: Deal Button, Fish Sort Button, Spades Sort Button, and a Reverse Toggle Button. The description for each button is in the instructions below: Program 4 – Sorting with nested classes and lambda expressions This program is a bit different from our others. Just like the last program, you will start with the project that is attached to this assignment. Remember to rename the project. You will lose points if you do not. Also, remember that you need to submit an Eclipse project, not just Java files. You will lose points there as well. The main point of the exercise is to demonstrate your ability to use various types of nested classes. Of course, sorting is important as well, but you don’t really need to do much more than create the class that does the comparison. In general, I like giving you some latitude in how you design and implement your projects. However, for this assignment, each piece is very specific as to how I want you to implement things. There are a number of parts to this program. Make certain you accomplish the two additions to the Card class early-on since much of the rest of your program will depend on that work. The requirements: Properly named project, good code (avoid redundancy), nice UI, etc. (20 pts) Implement the Comparable interface in the Card class. (15 pts) Sort the cards lowest to highest based on suit within rank, e.g. 2 clubs 2 diamonds 2 hearts 2 spades 3 clubs 3 diamonds etc. Add a static nested class to the Card class that implements the Comparator interface. (15 pts) Sort the cards lowest to highest based on rank within suit, e.g. 2 clubs 3 clubs 4 clubs 5 clubs etc. In the UI, add the following to your interface. Deal Button (10 pts) Implement the Deal action handler using an inner class (not local). You may want to pull some of the code from the show method that is already there. Or better, put the common code into a class and call it. Fish Sort Button (15 pts) Sort the code in a way that would be useful playing Go Fish. I.e. with all of the cards grouped together. Implement the action handler using a lambda expression in the UI. The code in the lambda expression should depend on the Card class for the actual sorting (i.e. the natural order). It must not call any other method in the UI class. Spades Sort Button (15 pts) Order the cards in such a way that they would be useful playing Spades; i.e. with the cards sorted by rank within suit and the suits in the order pro.

I have another assignment due for an advance java programming class .pdf

FORTUNE2505

4. Real gross domestic prodact A. measures the value of fimal goods and services produced within the borders of a given country during a glven time period adjusted for inflation B. is a measure of the overall level of prices mcasures the value of fieal goods and services produced within the borders of a g during a given time peried using current prices C C measures the value of final goods and services D, can change froem oene year to the next even if there is no change in output 5.Which is the largest component the United States: of total expenditures in A. Net Exports B. Consumption C. Govenment Purchases D. Investment 6 Fiscal policy refers to the: A. manipulation of government spending and taxes to stabilize domestic output, employment and the peice level. B. manipulation of the money supply to stabilize domestic output, employment, and the price level. 7. In the United States, the money supply (Mi) is coemprised of: currescy, checkable deposits, and near monies (saving deposits) B. coins, paper currency, checkable deposits, and crodit balances with brokers. C. paper currency, coims, gold certificates, and time deposits D. colns, paper currency, and checkable deposits. 8. Carrency in people\'s pockets and purses are: A.?nchaled in M. but not in M, B. incladed in both fi and in Mi C. included in M6,bt not in M D. excluded from Mi and A6 because people can exchange them for Federal Reserve notes. 9. Currency held in commercial banks as reserves: A. not part of the nation\'s money supply B. included in Af, but not in Ma C included both in Mi and in Ma D. included in Ma, but not in M 10. Which definition(s) of the money supply consists of the most highly liquid assets (can quickly be converted into cash)? A. MI B, M2 C. Neither or M2 D. MI and 2 11. The value of money in the United States is based on the stock of gold and silver beld by the United Stanes government. In other words, U.S. dollar is backed up by gold/silver A. True B, False Form A- Page 12 Solution 4. The correct answer is A. 5. The correct answer is B. 6. The correct answer is A. 7. The correct answer is D. 8. The correct answer is B. 9. The correct answer is D. 10.The correct answer is A. 11. The correct answer is A..

4. Real gross domestic prodact A. measures the value of fimal goods a.pdf

FORTUNE2505

Hypothesis What is your hypothesis for the genetic characteristics (e.g. dominant/recessive, autosomal/sex-linked, etc.) of the traits you have chosen to study? What observations lead you to make this hypothesis? What phenotypes and phenotypic ratio would you predict for the offspring (the first generation, or F1 generation) of this cross? What genotypes and genotypic ratio would you predict? How did you come to this prediction? Write your explanation as a hypothesis to the experiment you are doing. Enter your answers here. Solution Hypothesis: A cross between pure breeding dominant and recessive genotypes obtain all dominant phenotypes in the F1 generation. Presence of criss cross inheritance confirms the sex linkage of the trait while same proportion of affected son and daughter is the indicator of autosomal inheritance. Dominant trait is expressed in both homozygous and heterozygous genotype while the recessive trait is expressed in homozygous genotype only. Sex linked traits exhibit criss cross inheritance (father to daughter and mother to son). The cross( for dominant/recesive)= TT x tt= Tt Phenotype- all tall Genotype= all Heterozygous (Tt) The cross (for autosomal/sex linked)= XcY (affected father) x XX (normal mother)= XcX (normal but carrier daughters): XY (normal sons)..

Hypothesis What is your hypothesis for the genetic characteristi.pdf

FORTUNE2505

How is a process shown in a DFD(data flow diagram? Solution Data Flow Diagram provides a visual representation of the flow of information within a system. With sketching a Data Flow Diagram, you can notify the information provided by and delivered to someone who takes part in system processes, the information required in order to complete the processes and the information needed to be stored and accessed. A context diagram is a data flow diagram that only illustrates the top level, or else known as Level 0. At this level, there is only one able to be seen process node that represents the functions of a complete system in regards to how it interacts with external entities. DFD is non-deterministic - The numbering does not necessarily indicate sequence, it\'s useful in identifying the processes when discussing with users. Process labels should be verb phrases; data stores are represented by nouns. A data store must be associated to at least a process. An external entity must be associated to at least a process. Data stores should not be connected to an external entity, otherwise, it would mean that you\'re giving an external entity direct access to your data files. Data flows should not exist between 2 external entities without going through a process.

How is a process shown in a DFD(data flow diagramSolution Data.pdf

FORTUNE2505

More from FORTUNE2505 (20)