21. Predicting Products Explain why the hydration reaction involving 1-butene might yield two distinct products, whereas the hydration of 2-butene yields only one product. List the type of organic reaction needed to perform each of the following transformations. a. b. alkyl halide alcohol c. alkvl halidealkene Classify each of the following organic reactions as sub- stitution, addition, oxidation-reduction elimination, or condensation. a. 2-butene + hydrogenbutane b. propane + fluorine -2-fluoropropane hydrogen fluoride c. 2-propanol - propene +water d. cyclobutene + water - cyclobutanol
Solution
1-butene is an unsymmetrical alkene (alkene double bond is between 1 st and 2 nd carbon atom of four carbon chain) and its hydration products are a mixture of 2-butanol and 1-butanol with major product being 2-butanol (Zaitsev product) whereas 2-butene is a symmetrical alkene (alkene double bond is between 2 nd and 3 rd carbon atom of four carbon chain) whose hydration product is one and only 2-butanol.
Type of organic reaction
a.) alkene to alkane --------> Hydrogenation reaction (addition of double bond)
b.) alkyl halide to alcohol ---------> Nucleophilic substitution reaction (R-X bond converted to R-OH bond)
c.) alkyl halide to alkene ---------> Dehydrohalogenation reaction
Classify the organic reaction
a.) Addition reaction (addition of H 2 )
b.) substitution reaction (substitution of one fluorine molecule with one hydrogen molecule)
c.) oxidation reduction elimination reaction (elimination of water)
d.) addition reaction (addition of H 2 O)
.
INVESTIGATE THE PROPERTIES OF IONIC BOND AND COVALENT BOND THROUGH AN EXPERIMENTMISS ESTHER
CHEMISTRY FORM 4 KSSM
CHAPTER 5 : CHEMICAL BONDS (IONIC BOND AND COVALENT BOND)
EXPERIMENT 5.1 TO INVESTIGATE THE PROPERTIES OF IONIC BOND AND COVALENT BOND THROUGH EXPERIMENT
Uses of ionic compound and covalent compound in daily lifeMISS ESTHER
CHEMISTRY FORM 4 KSSM
CHAPTER 5 : CHEMICAL BONDS
(Uses of ionic compound and covalent compound in daily life)
1. INDUSTRIAL SECTOR
2. AGRICULTURAL SECTOR
3. MEDICAL SECTOR
4. DOMESTIC USE
Report on organic chemistry upon the experiment of forming ethane from the ethanol and functional groups. So, if you face any trouble while writing your assignments, then visit at Instant Assignment Help UK.
In a symmetric multiprocessor configuration- AH processors can perform.docxtristans3
In a symmetric multiprocessor configuration: AH processors can perform the same copy a program at the same time AH processors can perform the same types of functions Each processor has its own OS Each processor has its own set of I/O devises In SMP OS: Any processor may perform scheduling Only Master processor may perform scheduling Memory and process management must be done by different processors I/O management is a function of a special dedicated processor We can say that multiprocessor OS supports fault tolerance if: The operating system \'does not pay attention \" to the HW failure of a single processor The operating system controls only error signals from the external devices The operating system provides graceful degradation in the face of processor failure. The operating systems reacts only on error messages from the user programs HW-based cache coherence solutions used to recognize: The dynamic recognition at run time of potential inconsistency conditions HW errors in the cache Duplication of the data item in the cache The correct execution of the write operation in the cache What is wrong? The duster Is: A group of interconnected whole computers working together as a unified computing resource A group of separate computers used to solve one big task The alternative to SMP as an approach to providing high performance The alternative to SMP as an approach to providing high availability 20. If in multiprocessor system access time for a processor differs depending on which region of main memory is being accessed, we call memory access:
Solution
Answers:
15) 1
16) 1
17) 3
18) 1
19) 2
20) 4
.
In consumer behavior we discussed innovators- opinion leaders- and mar.docxtristans3
In consumer behavior we discussed innovators, opinion leaders, and market mavens who may have an influence over our purchase decisions. There is a similar concept discussed for organizational buyer behavior. Describe the concept and how it relates to the CB concepts.
Solution
In consumer behavior we discussed innovators, opinion leaders, and market mavens who may have an influence over our purchase decisions. There is a similar concept discussed for organizational buyer behavior. Describe the concept and how it relates to the CB concepts.
In consumer behavior, the main entities that can influence the purchase decision of a consumer are: 1) innovators are the one who are basically risk takers. The main attribute of them are the fact that they are able to absorb the financial cost as well as the social cost of adopting the unsuccessful products. They are the one who extensively use commercial media, cosmopolitan in their outlook, uses professional source for getting information, etc. 2) Market mavens are the individuals who provide wide amount of information about the different kinds of products and services. They basically foster information related to product quality, features, availability, price and sales. Extroverted, conscientious, and extensive use of media are some of the main characteristics of market mavens. 3) Opinion leaders are the one who basically provides information about a particular product or activities. They are having more status than that of their followers and are socially active (Hawkins, Mothersbaugh and Best, 2012). In contrast to innovators, opinion leaders and market mavens that may affect consumer purchase decision are buying center that affects the organizations
.
In chapter 2- 5 objectives of memory management were discussed- In Cha.docxtristans3
In chapter 2, 5 objectives of memory management were discussed. In Chapter 7 the 5 requirements are discussed. How does each Chapter 2 objective match to a Chapter 7 requirement?
Solution
After studying chapter 7 learning objectives, you should be able to:
Memory management is intended to satisfy the following requirements:
Relocation :
Programmers typically do not know in advance which other programs will be resident in main memory at the time of execution of their program.
Protection:
Processes need to acquire permission to reference memory locations for reading or writing purposes.
Sharing:
Advantageous to allow each process access to the same copy of the program rather than have their own separate copy.
Logical organization:
Physical organization:
Memory available for a program plus its data may be insufficient and overlying allows various modules to be assigned the same region of memory but is time consuming to program.
.
In certain chlorophyll cofactors the Mg2+ is axially coordinated by th.docxtristans3
In certain chlorophyll cofactors the Mg2+ is axially coordinated by the S-atom of a methionine. This is odd considering that Mg2+ is considered to be a “hard acid†cation. Why would water molecules be a more natural choice for coordination to the Mg2+ than sulfur? What is it then about this protein and its structure that makes the Mg-S coordination happen?
Solution
Mg 2+ is the bound central metal ion in chlorophyll which is the major photosynthetic pigment.In chlorophyll Mg 2+ is chelated equatorially by tetrapyrrolic macrocycle.One of the two axial position is occupied mainly by histidine residue and other by O-donors,N-donors or S atom.
According to Pearson classification Mg 2+belongs to hard ions and it\'s ionic radius is relatively small.It forms stable complexes with O- donors like H2O while less stable complexes with N donors or S atom.Since water is a polar molecule and is electron rich and also the distance between Mg 2+ and water is found to be 2.06 A° which is smaller compared to the others.
Also the water and Mg bond is electrostatic in nature.All this makes water and Mg 2+ coordination more stronger and preferred over S atom.
S is also being an electron rich ..it can also form bond with Mg 2+. These has been explained on the basis of Density functional theory which gives the distance between Mg 2+ and Water and S atom.
.
In c- Topic pointers Why do they call it dereferencing- As in derefer.docxtristans3
In c,
Topic pointers
Why do they call it dereferencing? As in dereferencing the pointer. Where does that name come from?
In c,
Topic pointers
Why do they call it dereferencing? As in dereferencing the pointer. Where does that name come from?
Topic pointers
Why do they call it dereferencing? As in dereferencing the pointer. Where does that name come from?
Solution
a.) A pointer is a variable that consists the address in memory of another variable. The deference of a pointer gives the contents of an object pointed to by the pointer.
b.) Through this we are accessing a variable indirectly. De- prefix mostly comes from the latin preposition meaning from. Dereferencing takes asway the reference and gives us what we are actually referring to.
c.) The unary operator * is the dereferecing operator ,which helps in accessing the object the pointer points to.
d.) Example:
typedef  struct X{int i_; double d_;} X;
XÂ Â Â x;
X*Â Â p= &x;
p->d_=3.15576;Â Â Â Â // dereferencing and accessing the data member x.d_
(*p).d_*=-1;
.
In C++ a function used to put data into a stack is typically called a.docxtristans3
In C++ a function used to put data into a stack is typically called a what?
Solution
Push function used to put data into a stack
A Stack is a data structure which works on the principle LIFO(Last In, First Out).The basic operations in a Stack are :
1. Push : In which we push the data into the stack.
2. Pop : In which we remove an element from the Stack.
All insertions and removals are done only from one side of the Stack , which is called the \'top\' of the Stack.
A stack is generally used in function calls where the local variables are pushed onto the Stack and when the function returns ,
it pops the variables from the Stack.
// Push operation to insert an element on top of stack.
void Push(int x)
{
if(top == MAX_SIZE -1) { // overflow case.
cout<<\"Error: stack overflow\ \";
return;
}
A[++top] = x;
}
.
More Related Content
Similar to 21- Predicting Products Explain why the hydration reaction involving 1.docx
INVESTIGATE THE PROPERTIES OF IONIC BOND AND COVALENT BOND THROUGH AN EXPERIMENTMISS ESTHER
CHEMISTRY FORM 4 KSSM
CHAPTER 5 : CHEMICAL BONDS (IONIC BOND AND COVALENT BOND)
EXPERIMENT 5.1 TO INVESTIGATE THE PROPERTIES OF IONIC BOND AND COVALENT BOND THROUGH EXPERIMENT
Uses of ionic compound and covalent compound in daily lifeMISS ESTHER
CHEMISTRY FORM 4 KSSM
CHAPTER 5 : CHEMICAL BONDS
(Uses of ionic compound and covalent compound in daily life)
1. INDUSTRIAL SECTOR
2. AGRICULTURAL SECTOR
3. MEDICAL SECTOR
4. DOMESTIC USE
Report on organic chemistry upon the experiment of forming ethane from the ethanol and functional groups. So, if you face any trouble while writing your assignments, then visit at Instant Assignment Help UK.
In a symmetric multiprocessor configuration- AH processors can perform.docxtristans3
In a symmetric multiprocessor configuration: AH processors can perform the same copy a program at the same time AH processors can perform the same types of functions Each processor has its own OS Each processor has its own set of I/O devises In SMP OS: Any processor may perform scheduling Only Master processor may perform scheduling Memory and process management must be done by different processors I/O management is a function of a special dedicated processor We can say that multiprocessor OS supports fault tolerance if: The operating system \'does not pay attention \" to the HW failure of a single processor The operating system controls only error signals from the external devices The operating system provides graceful degradation in the face of processor failure. The operating systems reacts only on error messages from the user programs HW-based cache coherence solutions used to recognize: The dynamic recognition at run time of potential inconsistency conditions HW errors in the cache Duplication of the data item in the cache The correct execution of the write operation in the cache What is wrong? The duster Is: A group of interconnected whole computers working together as a unified computing resource A group of separate computers used to solve one big task The alternative to SMP as an approach to providing high performance The alternative to SMP as an approach to providing high availability 20. If in multiprocessor system access time for a processor differs depending on which region of main memory is being accessed, we call memory access:
Solution
Answers:
15) 1
16) 1
17) 3
18) 1
19) 2
20) 4
.
In consumer behavior we discussed innovators- opinion leaders- and mar.docxtristans3
In consumer behavior we discussed innovators, opinion leaders, and market mavens who may have an influence over our purchase decisions. There is a similar concept discussed for organizational buyer behavior. Describe the concept and how it relates to the CB concepts.
Solution
In consumer behavior we discussed innovators, opinion leaders, and market mavens who may have an influence over our purchase decisions. There is a similar concept discussed for organizational buyer behavior. Describe the concept and how it relates to the CB concepts.
In consumer behavior, the main entities that can influence the purchase decision of a consumer are: 1) innovators are the one who are basically risk takers. The main attribute of them are the fact that they are able to absorb the financial cost as well as the social cost of adopting the unsuccessful products. They are the one who extensively use commercial media, cosmopolitan in their outlook, uses professional source for getting information, etc. 2) Market mavens are the individuals who provide wide amount of information about the different kinds of products and services. They basically foster information related to product quality, features, availability, price and sales. Extroverted, conscientious, and extensive use of media are some of the main characteristics of market mavens. 3) Opinion leaders are the one who basically provides information about a particular product or activities. They are having more status than that of their followers and are socially active (Hawkins, Mothersbaugh and Best, 2012). In contrast to innovators, opinion leaders and market mavens that may affect consumer purchase decision are buying center that affects the organizations
.
In chapter 2- 5 objectives of memory management were discussed- In Cha.docxtristans3
In chapter 2, 5 objectives of memory management were discussed. In Chapter 7 the 5 requirements are discussed. How does each Chapter 2 objective match to a Chapter 7 requirement?
Solution
After studying chapter 7 learning objectives, you should be able to:
Memory management is intended to satisfy the following requirements:
Relocation :
Programmers typically do not know in advance which other programs will be resident in main memory at the time of execution of their program.
Protection:
Processes need to acquire permission to reference memory locations for reading or writing purposes.
Sharing:
Advantageous to allow each process access to the same copy of the program rather than have their own separate copy.
Logical organization:
Physical organization:
Memory available for a program plus its data may be insufficient and overlying allows various modules to be assigned the same region of memory but is time consuming to program.
.
In certain chlorophyll cofactors the Mg2+ is axially coordinated by th.docxtristans3
In certain chlorophyll cofactors the Mg2+ is axially coordinated by the S-atom of a methionine. This is odd considering that Mg2+ is considered to be a “hard acid†cation. Why would water molecules be a more natural choice for coordination to the Mg2+ than sulfur? What is it then about this protein and its structure that makes the Mg-S coordination happen?
Solution
Mg 2+ is the bound central metal ion in chlorophyll which is the major photosynthetic pigment.In chlorophyll Mg 2+ is chelated equatorially by tetrapyrrolic macrocycle.One of the two axial position is occupied mainly by histidine residue and other by O-donors,N-donors or S atom.
According to Pearson classification Mg 2+belongs to hard ions and it\'s ionic radius is relatively small.It forms stable complexes with O- donors like H2O while less stable complexes with N donors or S atom.Since water is a polar molecule and is electron rich and also the distance between Mg 2+ and water is found to be 2.06 A° which is smaller compared to the others.
Also the water and Mg bond is electrostatic in nature.All this makes water and Mg 2+ coordination more stronger and preferred over S atom.
S is also being an electron rich ..it can also form bond with Mg 2+. These has been explained on the basis of Density functional theory which gives the distance between Mg 2+ and Water and S atom.
.
In c- Topic pointers Why do they call it dereferencing- As in derefer.docxtristans3
In c,
Topic pointers
Why do they call it dereferencing? As in dereferencing the pointer. Where does that name come from?
In c,
Topic pointers
Why do they call it dereferencing? As in dereferencing the pointer. Where does that name come from?
Topic pointers
Why do they call it dereferencing? As in dereferencing the pointer. Where does that name come from?
Solution
a.) A pointer is a variable that consists the address in memory of another variable. The deference of a pointer gives the contents of an object pointed to by the pointer.
b.) Through this we are accessing a variable indirectly. De- prefix mostly comes from the latin preposition meaning from. Dereferencing takes asway the reference and gives us what we are actually referring to.
c.) The unary operator * is the dereferecing operator ,which helps in accessing the object the pointer points to.
d.) Example:
typedef  struct X{int i_; double d_;} X;
XÂ Â Â x;
X*Â Â p= &x;
p->d_=3.15576;Â Â Â Â // dereferencing and accessing the data member x.d_
(*p).d_*=-1;
.
In C++ a function used to put data into a stack is typically called a.docxtristans3
In C++ a function used to put data into a stack is typically called a what?
Solution
Push function used to put data into a stack
A Stack is a data structure which works on the principle LIFO(Last In, First Out).The basic operations in a Stack are :
1. Push : In which we push the data into the stack.
2. Pop : In which we remove an element from the Stack.
All insertions and removals are done only from one side of the Stack , which is called the \'top\' of the Stack.
A stack is generally used in function calls where the local variables are pushed onto the Stack and when the function returns ,
it pops the variables from the Stack.
// Push operation to insert an element on top of stack.
void Push(int x)
{
if(top == MAX_SIZE -1) { // overflow case.
cout<<\"Error: stack overflow\ \";
return;
}
A[++top] = x;
}
.
In C Programming create a program that converts a number from decimal.docxtristans3
In C Programming create a program that converts a number from decimal to binary. You must use a stack to complete this assignment. • Void pop() • Void push(int data) • Int top() • Int isEmpty() You must create an implementation of a stack. You may use either an array or a linked list as the underlying structure. You will, at a minimum, need to implement the following stack functions: Your program should take decimal input from the user, and convert it to binary, and simply print it out.
Solution
normal program
#include<stdio.h>
int main(){
long int decimalNumber,remainder,quotient;
int binaryNumber[100],i=1,j;
printf(\"Enter any decimal number: \");
scanf(\"%ld\",&decimalNumber);
quotient = decimalNumber;
while(quotient!=0){
binaryNumber[i++]= quotient % 2;
quotient = quotient / 2;
}
printf(\"Equivalent binary value of decimal number %d: \",decimalNumber);
for(j = i -1 ;j> 0;j--)
printf(\"%d\",binaryNumber[j]);
return 0;
}
using stack
.
In an alternative universe- all rules governing quantum numbers and th.docxtristans3
In an alternative universe, all rules governing quantum numbers and the periodic table are exactly the same as our universe EXCEPT that m l = 0 --> l + 2 (due to font issues: zero to the letter L plus 2)
Answer the following:
What changes are made to the appearance of the periodic table (how have the s, p, d and f blocks changed and what does that do to the table)?
What is the 2nd noble gas in the alternate universe?
Solution
Answer -
M l = 0 to l+2
for n=1 ; l= n-1 = 0;
M l =0 to l+2 = 0,1,2
Hence there is 3 subshell in s orbital which occupy 6 electron.
in the same way;
for n=2
l=2-1=1
M l = 0 to l+2 = 0,1,2,3
p-orbital occupy 8 electrons.
n=3
l=2
M l = 0 to l+2 = 0.1.2.3.4
d have 10 electron.
n=4
l=3
M l = 0 to l+2 = 0,1,2,3,4,5
f occupy 12 electron
Second noble gas = 6(1s) +6(2s) +8(2p) =20th element is second noble gas = which is calcium, Ca
.
In a nonpolar covalent bond--- Electrons are shared unevenly Electrons.docxtristans3
In a nonpolar covalent bond...
Electrons are shared unevenly
Electrons are closest to the least electronegatative atom
Electrons are hypervalent
Electrons are donated from one atom to the other
Electrons are shared evenly
In a nonpolar covalent bond...
Electrons are shared unevenly
Electrons are closest to the least electronegatative atom
Electrons are hypervalent
Electrons are donated from one atom to the other
Electrons are shared evenly
Electrons are shared unevenly
Electrons are closest to the least electronegatative atom
Electrons are hypervalent
Electrons are donated from one atom to the other
Electrons are shared evenly
Solution
Ans . As a covalent bond is formed with the sharing of the electrons between atoms and not with the donation of electrons from one atom to another .
Also , a polar covalent bond has uneven or unequal sharing of electrons due to difference in polarity while a non-polar covalent bond has even or equal sharing of electrons between atoms as there is no difference in polarity .
Therefore , in a non-polar covalent bond electrons are shared evenly .
.
In a Classical model of the macroeconomy- the equilibrating mechanism.docxtristans3
Solution
true
Keynesian economics (/?ke?nzi?n/ kayn -zee-?n ; or Keynesianism ) is the view that in the short run, especially during recessions, economic output is strongly influenced by aggregate demand (total spending in the economy). In the Keynesian view, aggregate demand does not necessarily equal theproductive capacity of the economy; instead, it is influenced by a host of factors and sometimes behaves erratically, affecting production, employment, and inflation. [1]
The theories forming the basis of Keynesian economics were first presented by the British economist John Maynard Keynes in his book, The General Theory of Employment, Interest and Money , published in 1936, during theGreat Depression. Keynes contrasted his approach to the aggregate supply-focused \'classical\' economics that preceded his book. The interpretations of Keynes that followed are contentious and several schools of economic thoughtclaim his legacy.
Keynesian economists often argue that private sector decisions sometimes lead to inefficient macroeconomic outcomes which require active policy responses by the public sector, in particular, monetary policy actions by thecentral bank and fiscal policy actions by the government, in order to stabilize output over the business cycle. [2] Keynesian economics advocates a mixed economy
.
In 2012- Shurtleff estimates that warranty costs in the following year.docxtristans3
In 2012, Shurtleff estimates that warranty costs in the following year will be $25,000. Actual warranty costs in 2013 are only $20,000. What is the effect on the accounting equation when recording estimated warranty costs in 2012?
A)
Assets decrease
B)
Stockholders’ equity increases
C)
Assets increase
D)
Stockholders’ equity decreases
E)
Liabilities decrease
Solution
D) Stockholders’ equity decreases
Estimated Warranty cost is recorded as an expense for future warranty work, So it reduces Income, which ultimately decreases Stockholder\'s Equity.
.
In 2000- June- A 75-year-old widow- creates an irrevocable trust namin.docxtristans3
In 2000, June, A 75-year-old widow, creates an irrevocable trust naming her five adult grandchildren as the beneficiaries. The assets transferred in trust consist of marketable securities (worth $800,000) and June\'s personal residence (worth $400,000). Bob, June\'s younger brother and a practicing attorney, is designated as the trustee. Other provisions of the trust are as follows:
Bob is given the discretion to distribute the income to the beneficiaries based on their need or add it to corpus. He is also given the power to change trust investments and to terminate the trust.
The trust is to last for June\'s lifetime or, if sooner, until termination by Bob.
Upon termination of the trust, the principal and any accumulated income are to be distributed to the beneficiaries (June\'s grandchildren).
For 2000, June files a form 709 to report the transfer in trust and pays a gift tax based on value of $1.2 million ($800,000 + $400,000).
After the transfer in trust and up to the time of her death, June continues to occupy the residence. Although she pays no rent, she maintains the property and pays the yearly property taxes. June never discussed the matter of her continued occupancy of the residence with either Bob or the beneficiaries of the trust.
Upon June\'s death in 2008, the value of the trust is $2.3 million, broken down as follows: marketable securities and cash ($1.6 million) and residence ($700,000). Shortly thereafter, Bob sells the residence, liquidates the trust, and distributes the proceeds to the beneficiaries.
What are the estate taxes consequences of these transaction to June?
Solution
Since she pays her property taxes, there are no tax consequences on June.
However on selling the house, her children will have to pay tax on capital gains from the increase n the value of the house. To avoid this tax, they will have to live in the same house for two years.
.
In 2007- Heuy-'s actual income was $70-000- equal to his lifetime annu.docxtristans3
In 2007, Heuy\'s actual income was $70,000, equal to his lifetime annual average; Dewey\'s actual income was $50,000, $10,000 below his lifetime annual average; and Louie
Solution
H ello Pal,
F irst of all a very nice as well as intersting question from your side.
S o now straight to the question, as asked above with all the information available from your side and from mine, the answer is as under:
A fter calculation of the above given information, we can conclude that the answer will be as under:
Huey: 6.50%
Dewey: 5.24%
Louie: 7.28%
T hat is all I can say from the above given information by you, hope have solved your problem to some extent.
R egards.
.
Impulse and momentum are two two different parameters- Explain these p.docxtristans3
Impulse and momentum are two two different parameters. Explain these parameters from Newton\'s law of motion.
Solution
Impulse:impulse is dealing with the force.What it means is impulse is nothing but force that is applied on a object to against its motion for a given time.
J=Force* time
Momentum:which is a quantity deals with the object resistance to stop.Indirectly,object with greater momentum very hard to stop.
p=mv
consider the Newton\'s second law that is F=m*a
F=m*(v/t)
F*t=m*v
Here F*t nothing but impulse
m*v=momentum.
what it means is force that is acting on a given object for particular time changes the objects momentum.
.
Implementation of EHR Discuss the advantages and disadvantages associa.docxtristans3
Implementation of EHR
Discuss the advantages and disadvantages associated with implementing and using a regional and national EHR.
Solution
Advantages
Providing better, updated and accurate information about patient on regional and national level
It enables the quick access to patient record for better coordination and better care
It securely shares the electronic information of patients with clinics
Improve interaction and communication as well asa health care
Enables the safe and more reilable prescribtion
Disadvantages
Privacy is a concern when we record the data electronically, using the HER put organization at the risk if we don’t follow the privacy protocols
Identify theft can occur when unauthorized people gain advantage of access over the record.
Data loss and data redundancy are also the major disadvantages assocaited with HER softwares. When we use HER we must put into place a backup plan of the data Even if your local servers suffer a catastrophic crash, you will still be able to reconstruct your patient information through the backup in the cloud.
.
Implementing a new AIS system could prove to be beneficial or detrimen.docxtristans3
Implementing a new AIS system could prove to be beneficial or detrimental to an organization’s IT infrastructure. Assess the risks associated with integrating a new AIS system and suggest what management can do to minimize those risks.
Solution
Answer
From following the agents likely cause security related problems to the AIS.
From Employees
From Consultants
From Suppliers
From competitors
From IT mercenaries
From Espionage experts
From the above agents, AIS system facing risks.
In most of cases the following types of attacks like computer viruses, backdoors, password crackers, scanners and social engineering attacks.
Threats affecting the infrastructure of the AIS represent actions, possible or taken ,they might attack the system.
Here 2 types of threats like internal and external.
Management taken some preventions, that Can be
Those can be avoided by using Risk Management can be defind as the body of methods aiming at identifying, checking , removing events that may effect the resource of the system.
The body contains risk analysis, cost analysis,selection of mechanism, as well as overall assessment of the security. These risk analysis like following angles like quantitive analysis, quality analysis, workstation analysis.
There are 2 ways of avoid the situation of risk, covering threats thats are mostly likely to occur, while preserving the initial checking methods, reducing the costs as to checking measures.
Generally provides the Security Service management Supplier, they provide both security services and management thereof.
Security management service will be conducted by Service Supplier.
.
Im creating a stack class using generics- what should my peek method l.docxtristans3
Im creating a stack class using generics. what should my peek method look like ? I\'m just using a simple peek method, here\'s what i have thus far
public class stack<T>
{
private ArrayList<T> stack = new ArrayList<T> ();
private int top = 0;
public int size () {
return top;
}
public void push (T item) {
stack.add (top++, item);
}
public T pop () {
return stack.remove (--top);
}
public T peek()
{
}
public Boolean isEmpty()
{
if (top == -1)
return true;
else
return false;
}
}
Solution
Hi,
I have updated peek() methd. Highlighted code changes.
public class stack<T>
{
private ArrayList<T> stack = new ArrayList<T> ();
private int top = 0;
public int size () {
return top;
}
public void push (T item) {
stack.add (top++, item);
}
public T pop () {
return stack.remove (--top);
}
public T peek()
{
if (isEmpty()) {
throw new EmptyStackException();
}
return stack.get(top);
}
public Boolean isEmpty()
{
if (top == -1)
return true;
else
return false;
}
}
.
ii)State whether you would expect the following Group 13 metal cations.docxtristans3
ii)State whether you would expect the following Group 13 metal cations to act as Lewis acids or bases. Order the cations in terms of softest to hardest. Explain your answer. Al3+, Tl3+, Ga3+, Tl+
(iii) State whether you would expect the following Group 15 hydrides to act as Lewis acids or bases. Order the hydrides in terms of softest to hardest. Explain your answer. PH3, NH3, AsH3
Solution
ii) The given group 13 metal cations will act as a Lewis acids , because cations are are electron deficient and act as a electron acceptor.
Hard Acids are Lewis acid which are small in size and most likely are the light metal cation with high positive oxidation state like Al 3+
Soft Acids are Lewis acid which are larger in size and most likely are the heavy metal cation associated with low oxidation state like Tl 3+ Tl +
Oder of cation from softest to hardest   Tl + < Tl 3+ < Al 3+
(iii) The given Group 15 hydrides will acts as Lewis Base, because Nitrogen, Phosphorus and Arsenic has a lone pair of electron that it can donate.
Hard Base are Lewis base anions or neutral molecules which are not easily polarizable like NH 3
Soft Base are Lewis base anions or neutral molecules which are easily polarizable like PH 3 and AsH 3
Order the hydrides in terms of softest to hardest AsH 3 < PH 3 <NH 3
.
IMF in Greece- Good or bad for the country- Why-SolutionIMF is interna.docxtristans3
IMF in Greece. Good or bad for the country? Why?
Solution
IMF is international monetary fund.It was established with the motive of promoting international monetary cooperation.It is good because:
1. It helps in abolishing the exchange restrictions among member nations.
2. It helps in maintaining balanced economic development of the member nations by poviding them monetary help.
3. It helps the member countries in making investment in profitable projects.
4. It offers monetary help to member countries in correcting the disequilibrium of balance of payment.
IMF is bad because:
1. it is a club of rich countries only. it discriminate between rich and poor memebers.
2. it do not provides loan for developmental projects. it only gives loans for maintaining the favourable balance of payment.
3. it interferes in the domestic economies of member countries. while providing loan to member counties IMF put many restrictions.
4. IMF tried to maintain stability in price of gold but failed in achieving this aim.
.
2- What is a colloid- Why is it difficult to filter a colloid- 3- What.docxtristans3
2. What is a colloid? Why is it difficult to filter a colloid? 3. What is coagulation? What is peptization? 4. Why is the solution of AgNOs added slowly? 5. Why must a large excess of AgNOs be avoided? 6. Why must the silver chloride be protected from the light? 7. For simplicity assume that your unknown chloride is NaCl. Calculate how many mL of the 5% AgNO3 solution must be added to 0.4020 g of the NaCl sample to precipitate all the chloride. Note: 5% means that there are 5 grams of silver nitrate per 100 mL of solution.
Solution
2) Colloid : Colloid is a dispersion of small tiny particles in a liquid.. In collods the tiny particles remain suspended in the solvent. rather than settling at the bottom.
It is difficult to filter collodal solution because these tiny particles pass through the filter paper.
3) Coagulation : means the aggrigation of oppositely charged particles which settle down under the gravity.
Peptization : It is a phenomenon of the formation of a colloidal dispersion from precipitation.
4)Addition of the AgNO3 be done slowly because the addition tends to yield large particles which makes filtration more efficiently .It also helps limit coprecipitation.
5)To avoid coprecipatation the excess of AgNO3 be avoided.
6)Silver chloride must be protected from light as it is unstable. Exposure to light it becomes greyish yellow . Hence, to avoid decompostion, it must be protected from light.
.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
Macroeconomics- Movie Location
This will be used as part of your Personal Professional Portfolio once graded.
Objective:
Prepare a presentation or a paper using research, basic comparative analysis, data organization and application of economic information. You will make an informed assessment of an economic climate outside of the United States to accomplish an entertainment industry objective.
Embracing GenAI - A Strategic ImperativePeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Honest Reviews of Tim Han LMA Course Program.pptxtimhan337
Personal development courses are widely available today, with each one promising life-changing outcomes. Tim Han’s Life Mastery Achievers (LMA) Course has drawn a lot of interest. In addition to offering my frank assessment of Success Insider’s LMA Course, this piece examines the course’s effects via a variety of Tim Han LMA course reviews and Success Insider comments.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
21- Predicting Products Explain why the hydration reaction involving 1.docx
1. 21. Predicting Products Explain why the hydration reaction involving 1-butene might yield two
distinct products, whereas the hydration of 2-butene yields only one product. List the type of
organic reaction needed to perform each of the following transformations. a. b. alkyl halide
alcohol c. alkvl halidealkene Classify each of the following organic reactions as sub- stitution,
addition, oxidation-reduction elimination, or condensation. a. 2-butene + hydrogenbutane b.
propane + fluorine -2-fluoropropane hydrogen fluoride c. 2-propanol - propene +water d.
cyclobutene + water - cyclobutanol
Solution
1-butene is an unsymmetrical alkene (alkene double bond is between 1 st
and 2 nd
carbon atom of
four carbon chain) and its hydration products are a mixture of 2-butanol and 1-butanol with
major product being 2-butanol (Zaitsev product) whereas 2-butene is a symmetrical alkene
(alkene double bond is between 2 nd
and 3 rd
carbon atom of four carbon chain) whose hydration
product is one and only 2-butanol.
Type of organic reaction
a.) alkene to alkane --------> Hydrogenation reaction (addition of double bond)
b.) alkyl halide to alcohol ---------> Nucleophilic substitution reaction (R-X bond converted to R-
OH bond)
c.) alkyl halide to alkene ---------> Dehydrohalogenation reaction
Classify the organic reaction
a.) Addition reaction (addition of H 2 )
b.) substitution reaction (substitution of one fluorine molecule with one hydrogen molecule)
c.) oxidation reduction elimination reaction (elimination of water)
d.) addition reaction (addition of H 2 O)
