1. CHRISTOPHER T. CRAIN
3030 E Wallisville Rd, Baytown, Texas 77521 (936)391-1952 ct_crain@yahoo.com
PROFESSIONAL HISTORY
QC TECHNICIAN 09/2014- 04/2015
INFINITY DEERPARK, TX
LINDE GAS- LA PORTE, TX
Job Responsibilities Included:
• Build work packages. Build code packages.
• Maintain weld procedures, test welders. Maintain weld and flange logs.
• Oversee all NDE is complete on all piping packages.
• Review all UT reports as well as reviewing film for x-rays.
• Audit complete packages to make sure all work is to be complete and performed by code
and to meet plant specifications.
• Supervised Technicians.
• That all welders have the correct percentage on x-rays for completed packages.
• Oversee Structural Steel installation
• Oversee Civil Department installation; Concrete and dirt work.
• Oversee concrete pours.
QC TECHNICIAN 06/2013- 09/2014
BILFINGER TEPSCO DEERPARK, TX
ENTERPRISE- MT. BELVIEU, TX
Job Responsibilities Included:
• Build work packages. Build code packages.
• Maintain weld procedures, test welders. Maintain weld and flange logs.
• Oversee all NDE is complete on all piping packages.
• Review all UT reports as well as reviewing film for x-rays.
• Audit complete packages to make sure all work is to be complete and performed by code
and to meet plant specifications.
• Supervised Technicians.
• That all welders have the correct percentage on x-rays for completed packages.
• Oversee Structural Steel installation
• Oversee Civil Department installation; Concrete and dirt work.
• Oversee concrete pours.
LEAD QC SUPERVISOR 03/2013-05/2013
ELITE TURNAROUND SERVICES LAPORTE, TX
CHS – LAUREL, MT
Job Responsibilities Included:
• Build work packages. Build code packages.
• Maintain weld procedures, test welders. Maintain weld and flange logs.
• Oversee all NDE is complete on all piping packages.
• Review all UT reports as well as reviewing film for x-rays.
• Audit complete packages to make sure all work is to be complete and performed by code
and to meet plant specifications.
• Supervised Technicians.
• That all welders have the correct percentage on x-rays for completed packages.
2. QC TECHNICIAN 02/2013- 03/2013
JV INDUSTRIAL LAPORTE, TX
ROHM & HAAS - PASADENA, TX
Job Responsibilities Included:
• Build work packages. Build code packages.
• Maintain weld procedures, test welders. Maintain weld and flange logs.
• Oversee all NDE is complete on all piping packages.
• Review all UT reports as well as reviewing film for x-rays.
• Audit complete packages to make sure all work is to be complete and performed by code
and to meet plant specifications.
• Supervised Technicians.
• That all welders have the correct percentage on x-rays for completed packages.
LEAD QC SUPERVISOR 11/2012-02/2013
FORCE SPECIALITY SERVICES LAPORTE, TX
PHILLIPS 66 - SWEENEY, TX
Job Responsibilities Included:
• Build work packages. Build code packages.
• Maintain weld procedures, test welders. Maintain weld and flange logs.
• Oversee all NDE is complete on all piping packages.
• Review all UT reports as well as reviewing film for x-rays.
• Audit complete packages to make sure all work is to be complete and performed by code
and to meet plant specifications.
• Supervised Technicians.
• That all welders have the correct percentage on x-rays for completed packages.
LEAD QC SUPERVISOR 08/2012-10/2012
GULFSPAN INDUSTRIAL BEAUMONT, TX
LYONDELL- HOUSTON, TX
Job Responsibilities Included:
• Overseeing all NDE was complete. Built code packages.
• Tested welders. Supervised Techs.
• Audited complete packages to make sure all work is to be completed and performed by
code and to meet plant specifications.
• Maintain weld procedures. Built work packages. Maintain weld and flange logs.
• Reviewing UT reports as well as reviewing films for x-rays
SITE QC SUPERVISOR 06/2012-08/2012
FORCE SPECIALITY SERVICES LAPORTE, TX
CHEVRON CEDAR BAYOU- BAYTOWN, TX
Job Responsibilities Included:
• Building work and code packages. Maintaining weld procedures as well as weld and
flange logs.
• Overseeing all NDE was complete.
• Auditing complete packages to make sure all work is to be performed by code and to
meet plant specifications.
• Writing all repair authorization forms for code work
• Supervised other Technicians. Testing welders.
3. LEAD QC SUPERVISOR 05/2012-06/2012
FORCE SPECIALITY SERVICES LAPORTE, TX
GULF COAST FRACTIONATORS- MT. BELVIEU, TX
Job Responsibilities Included:
• Building work packages. Building code packages.
• Maintain weld and flange logs. Maintain weld procedures.
• Overseeing all NDE was complete.
• Testing welders.
• Auditing completed packages to make sure all work is to be performed by code and to
meet plant specifications.
• Writing all repair authorization forms for code work.
• Supervised Technicians.
QC TECHNICIAN 03/2012-05/2012
JV INDUSTRIAL DEER PARK, TX
LYONDELL- CHANNELVIEW, TX
Job Responsibilities Included:
• Inspect valves and major compressions, piping bundles and spoilers; analyze inspection
to ensure it passes safety codes.
• PT Welds, Weld Mapping, Weld tracking, VT Welds, flange bolt ups, PMI‘s.
• Inspect all fits, check lengths, inspect all welds and make sure they are correct to pass
inspection, analyze and inspect the roll of all 90 degrees and T‘s.
• Coordinated All NDE’s. Built Code Packages.
QC TECHNICIAN 01/2012-03/2012
JV INDUSTRIAL DEER PARK, TX
TESORO- MARTINEZ, CA
Job Responsibilities Included:
• Inspect valves and major compressions, piping bundles and spoilers; analyze inspection
to ensure it passes safety codes.
• Inspect all fits, check lengths, inspect all welds and make sure they are correct to pass
inspection, analyze and inspect the roll of all 90 degrees and T‘s.
• PMI‘s, PT Welds, Weld Mapping, Weld tracking, VT Welds, flange bolt ups.
• Coordinated All NDE. Built Code Packages.
LEAD QC SUPERVISOR 11/2011-12/2011
JV INDUSTRIAL DEER PARK, TX
ROHM & HAAS- DEER PARK, TX
Job Responsibilities Included:
• Inspect valves and major compressions, piping bundles and spoilers; analyze inspection
to ensure it passes safety codes.
• PT Welds, Weld Maps, Weld tracking, VT‘s, flange bolt ups, PMI‘s.
• Analyze and inspect the roll of all 90 degrees and T‘s. Inspect all fits, check lengths,
inspect all welds and make sure they are correct to pass inspection.
• Supervised Technicians Coordinated All NDE’s Built All Code Packages.
4. LEAD QA/QC SUPERVISOR 10/2011-11/2011
JV INDUSTRIAL DEER PARK, TX
ARKEMA- CLEAR LAKE, TX
Job Responsibilities Included:
• Coordinated All NDE’s. Built All Code Packages. Supervised Technicians.
• Inspect valves and major compressions, piping bundles and spoilers; analyze inspection
to ensure it passes safety codes.
• Inspect all fits, check lengths, inspect all welds and make sure they are correct to pass
inspection, analyze and inspect the roll of all 90 degrees and T‘s
• Weld tracking, VT Welds, flange bolt ups, PMI‘s, PT Welds, Weld Map.
• Testing Welders.
LEAD QA/QC SUPERVISOR 06/2011-08/2011
JV INDUSTRIAL DEER PARK, TX
BP REFINERY- SUNRAY, TX
Job Responsibilities Included:
• Inspect valves and major compressions, piping bundles and spoilers; analyze inspection
to ensure it passes safety codes.
• Inspect all fits, check lengths, inspect all welds and make sure they are correct to pass
inspection, analyze and inspect the roll of all 90 degrees and T‘s.
• Weld tracking, VT and PT Welds, Weld Mapping, flange bolt ups, PMI‘s
• Supervised Technicians. Coordinated All NDE. Built All Code Packages.
LEAD QC SUPERVISOR 04/2011-06/2011
JV INDUSTRIAL DEER PARK, TX
FAB SHOP- LA PORTE, TX
Job Responsibilities Included:
• Inspect all fits, check lengths of all welds and make sure they are correct to pass
inspection, analyze and inspect the roll of all 90 degrees and T‘s.
• Weld tracking, VT and PT Welds, Weld Maps, flange bolt ups, PMI‘s.
• Coordinated All NDE. Built All Code Packages. Supervised Technicians.
• Inspect valves and major compressions, piping bundles and spoilers; analyze inspection
to ensure it passes safety codes.
LEAD QC SUPERVISOR 03/2011-04/2011
JV INDUSTRIAL DEER PARK, TX
BAYER REFINERY-BAYTOWN, TX
Job Responsibilities Included:
• Inspect valves and major compressions, piping bundles and spoilers; analyze inspection
to ensure it passes safety codes procedures.
• Inspect all fits, check lengths, inspect all welds and make sure they are correct to pass
inspection, analyze and inspect the roll of all 90 degrees and T‘s.
• Weld tracking, VT and PT Welds, Weld Maps, flange bolt ups, PMI‘s.
• Supervised Technicians. Coordinated All NDE’s. Built All Code Packages.
LEAD QC SUPERVISOR 02/2011-03/2011
JV INDUSTRIAL DEER PARK, TX
CONOCO PHILLIPS-MT.BELVIEU, TX
Job Responsibilities Included:
5. • Inspect valves and major compressions, piping bundles and spoilers; analyze inspection
to ensure it passes safety codes procedures.
• Inspect all fits, check lengths, inspect all welds and make sure they are correct to pass
inspection, analyze and inspect the roll of all 90 degrees and T‘s.
• Weld tracking, VT Welds, flange bolt ups, PMI‘S, PT Welds, Weld Mapping.
• Supervised other Technicians. Coordinated All NDE’s. Built All Code Packages.
QC SUPERVIOR 10/2010-02/2011
ENERPIPE CHANNELVIEW, TX
Job Responsibilities Included:
• NBIC code work. Coordinated All NDE’s. Built All Code Packages. Supervised.
• High pressure tubing, cone rings, rtj rings, set ups of all x-rays.
• Inspect valves and major compressions, piping bundles and spoilers; analyze inspection
to ensure it passes safety codes.
• Inspect all fits, check lengths, inspect all welds and make sure they are correct to pass
inspection. Analyze and inspect the roll of all 90 degrees and T‘s.
• Weld tracking, VT Welds flange bolt ups, PMI‘s, PT Welds, Weld Maps.
Supervisor/Operator 05/2010-10/2010
Clean-CO CHANNELVIEW, TX
Job Responsibilities Included:
• Operate heavy equipment and vacuum trucks.
• Supervisor over crew.
QC TECHNICIAN 01/2009-05/2010
REPCON INC. CORPUS CHRISTI, TX
VALERO- CORPUS CHRISTI, TX
Job Responsibilities Included:
• High pressure tubing, cone rings, rtj rings, set ups of all x-rays.
• Inspect valves and major compressions, piping bundles and spoilers; analyze inspection
to ensure they pass safety code procedures.
• Inspect all fits, check lengths, inspect all welds and make sure they are correct to pass
inspection.
• NBIC code work.
• Analyze and inspect the roll of all 90 degrees and T‘s, making sure to pass safety codes.
• Weld tracking, VT and PT Welds, Weld Maps, flange bolt ups, PMI‘s
QC TECHNICIAN 01/2007-12/2008
ZACHRY INDUSTRIAL DEER PARK, TX
CHEVRON CEDAR BAYOU PLANT- BAYTOWN, TX
Job Responsibilities Included:
• NBIC code work.
• High pressure tubing, cone rings, rtj rings, set ups of all x-rays.
• Inspect valves and major compressions, piping bundles and spoilers; analyze inspection
to ensure it passes safety code procedures.
• Inspect all fits, check lengths, inspect all welds and make sure they are correct to pass
inspection.
• Analyze and inspect the roll of all 90 degrees and T‘s, making sure to pass safety codes.
• Weld tracking, VT Welds, PT Welds, Weld Mapping, Flange bolt ups, PMI‘s
QC TECHNICIAN 11/2006-01/2007
BAY AREA INDUSTRIAL LA PORTE, TX
ROHM & HAAS- DEER PARK, TX
6. Job Responsibilities Included:
• Inspect valves and major compressions, piping bundles and spoilers; analyze inspection
to ensure it passes safety code procedures.
• Inspect all fits, check lengths. Inspect all welds and make sure they are correct to pass
inspection.
• Analyze and inspect the roll of all 90 degrees and T‘s, making sure to pass safety codes.
• Weld tracking, VT and PT Welds, Weld Mapping, PMI‘s. Flange bolt ups.
QC TECHNICIAN 10/2006-11/2006
JV INDUSTRIAL LA PORTE, TX
VALERO-HOUSTON, TX
Job Responsibilities Included:
• Inspect valves and major compressions, piping bundles and spoilers; analyze inspection
to ensure it passes safety code procedures.
• Inspect all fits, check lengths, of all welds and make sure they are correct to pass
inspection.
• Analyze and inspect the roll of all 90 degrees and T‘s, making sure they pass safety
codes.
• Weld tracking, VT and PT Welds, Weld Maps, PMI‘s. Flange bolt ups.
QC LEAD TECHNICIAN 05/2006-10/2006
TURNER INDUSTRIES PASADENA, TX
EXXONMOBIL-BAYTOWN, TX
Job Responsibilities Included:
• Responsible for Civil, Iron, Mechanical and Piping Departments
• Inspect valves and major compressions, piping bundles and spoilers; analyze inspection
to ensure it passes safety code procedures.
• Inspect all fits, check lengths, and welds to ensure they are correct to pass inspection
• Analyze and inspect the roll of all 90 degrees and T‘s, making sure they pass safety
codes.
• Weld mapping, Weld tracking, VT and PT Welds. Flange bolt ups.
QC TECHNICIAN 04/2006-05/2006
BAY AREA INDUSTRIAL LA PORTE, TX
FAB SHOP-LA PORTE, TX
Job Responsibilities Included:
• Inspect valves and major compressions, piping bundles and spoilers; analyze inspection
to ensure it passes safety code procedures.
• Weld Mapping, PT Welds, VT Welds, Weld Tracking. Flange Bolt Ups.
• Inspect all welds, fit and checking lengths to make sure they are correct to pass
inspection.
• Analyze and inspect the roll of all 90 degrees and T‘s, making sure it passes safety
codes.
QC TECHNICIAN 01/2006-04/2006
JV INDUSTRIAL LAPORTE, TX
FAB SHOP-LA PORTE, TX
Job Responsibilities Included:
• Inspecting of Valves and major compressions, piping bundles and spoilers; analyze
inspection to ensure it passes safety code procedures.
• PT Welds. Weld Mapping.
• Inspect and analyze the roll of all 90° and T’s to ensure it passes safety codes.
• Inspect all fits. Checking lengths.
7. • Inspect all welds, making sure they are correct to pass inspection.
EDUCATION
• ROSS S. STERLING HIGH BAYTOWN, TEXAS
DIPLOMA