M. VIJAY KUMAR (Commissioning & Operations, Air Separation Unit)VIJAY KUMAR MANI
M. Vijay Kumar has 9 years of experience working in air separation units. He is currently a Deputy Manager at Jindal Steel & Power Ltd in Angul, Odisha, where he has helped commission two 1200 TPD oxygen plants. Prior to this, he worked at Essar Steel India Ltd, where he helped commission three 1700 TPD oxygen plants. He has a B.Tech in Chemical Engineering and skills in areas like process design, DCS operation, pre-commissioning, and equipment troubleshooting.
Real Time Optimization of Air Separation PlantsISA Interchange
In this presentation, the important aspects of an RTO application on air separation will be discussed including
the general IT structure, functions of its different software components, important steps in completing
such a project, challenges in optimization and corresponding solutions.
T.H. Chemicals wants to produce nitrogen, oxygen, and argon from air using cryogenic distillation. Cryogenic air separation is the dominant technology for producing large quantities of high-purity liquified gases. The process involves compressing and cooling air, removing impurities via membrane separation, further cooling the air using heat exchangers, and fractionating the components in distillation columns. Oxygen is recovered from the bottom of the low pressure column at 99.49% purity, nitrogen from the top at 99.275% purity, and argon from the middle. Heat integration occurs between the condenser and reboiler to improve efficiency.
The document outlines 11 steps for sizing a pipe line to carry water at 100 m3/hr, including: calculating the internal pipe diameter, selecting the nearest available pipe size, determining the fluid velocity, calculating the Reynolds number and friction factor, determining equivalent length, calculating pressure drop, and comparing the available and calculated pressure drops. The goal is to select a pipe size that ensures the available pressure drop is greater than the calculated pressure drop.
M. VIJAY KUMAR (Commissioning & Operations, Air Separation Unit)VIJAY KUMAR MANI
M. Vijay Kumar has 9 years of experience working in air separation units. He is currently a Deputy Manager at Jindal Steel & Power Ltd in Angul, Odisha, where he has helped commission two 1200 TPD oxygen plants. Prior to this, he worked at Essar Steel India Ltd, where he helped commission three 1700 TPD oxygen plants. He has a B.Tech in Chemical Engineering and skills in areas like process design, DCS operation, pre-commissioning, and equipment troubleshooting.
Real Time Optimization of Air Separation PlantsISA Interchange
In this presentation, the important aspects of an RTO application on air separation will be discussed including
the general IT structure, functions of its different software components, important steps in completing
such a project, challenges in optimization and corresponding solutions.
T.H. Chemicals wants to produce nitrogen, oxygen, and argon from air using cryogenic distillation. Cryogenic air separation is the dominant technology for producing large quantities of high-purity liquified gases. The process involves compressing and cooling air, removing impurities via membrane separation, further cooling the air using heat exchangers, and fractionating the components in distillation columns. Oxygen is recovered from the bottom of the low pressure column at 99.49% purity, nitrogen from the top at 99.275% purity, and argon from the middle. Heat integration occurs between the condenser and reboiler to improve efficiency.
The document outlines 11 steps for sizing a pipe line to carry water at 100 m3/hr, including: calculating the internal pipe diameter, selecting the nearest available pipe size, determining the fluid velocity, calculating the Reynolds number and friction factor, determining equivalent length, calculating pressure drop, and comparing the available and calculated pressure drops. The goal is to select a pipe size that ensures the available pressure drop is greater than the calculated pressure drop.
Flow Inside a Pipe with Fluent Modelling Andi Firdaus
This document describes a numerical simulation of laminar and turbulent flow inside a pipe using Fluent software. The simulation models water flow inside a 1m diameter pipe that is 20m long. Two models are considered: laminar flow at a Reynolds number of 300 and turbulent flow at 8500. Theoretical equations for laminar and turbulent velocity profiles, entrance length, and Reynolds number correlations are presented. The numerical simulation sets up the models with appropriate boundary and material properties to solve the steady-state Navier-Stokes equations and compare results to experimental data.
The lecture was delivered by me for IIChE students chapter on the theme of Student-Industry Interaction at Bharati Vidyapeeth on 8th Feb'14. Foe my blogs kindly refer: https://www.learncax.com/knowledge-base/blog/by-author/ganesh-visavale
Calculation of pipeline capacity using steady state and dynamic simulation an...Waqas Manzoor
The document discusses the calculation of pipeline capacity using steady state and dynamic simulation in Aspen HYSYS as well as the Weymouth equation. It provides the composition and properties of natural gas, describes performing steady state and dynamic simulations, and calculates pipeline capacity using the Weymouth equation with input parameters like pipeline diameter, length, inlet/outlet pressures and temperatures, gas properties, and compressibility factor. The calculated flow rate using the Weymouth equation is 4.251 MMscfd.
This document discusses cryogenics and its applications. Cryogenics involves producing and studying very low temperatures, from around -100°C to absolute zero. Common cryogenic liquids used are liquid nitrogen and helium. Liquid nitrogen condenses around -196°C and freezes at -210°C, while liquid helium boils at -269°C and does not freeze at atmospheric pressure. Cryogenic technology is used in rocket propulsion systems, medical cryosurgery, manufacturing, electronics, and fuel research. Some key applications include aerospace cryogenic engines, medical cryosurgery, frozen food transportation, and blood banking.
Presentation on Calculation of Polytropic and Isentropic Efficiency of natura...Waqas Manzoor
This presentation demonstrates comparison of calculation of Polytropic and Isentropic Efficiency of Natural Gas Compressor using Aspen HYSYS & using Manual Calculations. Complete derivation of equations of Polytropic and Isentropic efficiency, have also been demonstrated. The slight difference observed in the manually calculated values and Aspen HYSYS simulation, may be attributed to the calculation method of the software which is based on numerical integration.
Cryogenic technology involves using rocket propellants at extremely low temperatures. Liquid oxygen and hydrogen offer the highest energy efficiency for rocket engines. Some applications of cryogenic technology include space vehicles, grinding, superconductivity, food industry, and body preservation. The United States was the first to develop cryogenic rocket engines using liquid oxygen and hydrogen. India has also successfully launched rockets using cryogenic technology. The process involves pressurizing and pumping liquid nitrogen for cooling before combustion in the engine's nozzle. Advantages include high energy per unit mass of propellants, clean combustion producing only water vapor, and low cost of liquid oxygen compared to other fuels.
1) Flow through pipes connected in series was analyzed. Head loss is calculated as the sum of losses in each pipe plus local losses at connections. Total head loss (H) equals the height difference between reservoirs.
2) Flow through pipes connected in parallel was also examined. The total flow (Q) equals the sum of individual pipe flows (Q1 + Q2). If pipe characteristics are the same, head loss will be equal in each pipe.
3) An example problem demonstrated calculating flow rate (Q) through two pipes in series where diameter changes over length. Q was found to be 0.158 m3/s. A second example calculated flow rates for two parallel pipes and the diameter required to replace
Computational fluid dynamics (CFD) is a branch of fluid mechanics that uses numerical analysis and data structures to analyze and solve problems that involve fluid flows. CFD uses three-dimensional simulations of fluid flow by solving the Navier-Stokes equations with computational algorithms and systems. It gives a comprehensive flow field view not possible through experimental testing alone. CFD has advantages of low cost, speed, ability to simulate real and ideal conditions, and providing comprehensive flow parameter information. Limitations include reliance on accurate physical models, presence of numerical errors, and accuracy of boundary conditions provided. CFD has applications in aerospace, automotive, HVAC, bio-medical, and other industries. Commercial CFD software packages are available
This document summarizes an experiment that investigates the relationship between water pressure and flow rate. Water was flowed from a container through a small hole for timed intervals at varying water heights, and the resulting flow rate was measured. The data showed a proportional relationship between pressure difference and squared flow rate, supporting Bernoulli's equation. The slope of the line of best fit remained constant, as expected for this experimental setup. Limitations included the assumption of zero kinetic energy and challenges closing the hole precisely.
Aiga-safe practices guide for cryogenic air separation plantstraccess
The document provides guidance on safe practices for operating cryogenic air separation plants. It discusses typical features of air separation units including air compression, contaminant removal, heat exchange, distillation, and expansion. It covers health hazards, plant design considerations, intake air quality, equipment such as compressors, expanders, pumps, coldboxes, control systems, product handling, piping, shutdown procedures, maintenance, and operations. The document aims to inform safe operation of these plants.
This document provides guidance on designing irrigation systems. It discusses key concepts like water flow in pipes, hydrostatic pressure, pressure head, total head, head loss, and lateral pipe characteristics. The document presents examples of calculating water velocity, flow rate, pipe diameter, and pressure at different points in an irrigation system. It also discusses alternatives for designing manifolds and ensuring even distribution of pressure and water across subplots. The overall aim is to provide practical methods for designing efficient pressure irrigation systems.
This presentation deals with the basic knowledge and easy concept of cryogenics that can help to bring up your basic knowledge about cryogenics.
This basically contains the history and applications of cryogenic technology.
This document describes the design of a plant for cryogenic distillation of air into oxygen and nitrogen. It includes an introduction to air separation and the cryogenic process. Process equipment like compressors, heat exchangers, and distillation columns are designed. Mass and energy balances are performed. The distillation columns and condenser are designed and specifications are provided. An economic analysis includes capital costs, production costs, profitability metrics, payback period and safety considerations. References for design methods are also listed.
CFD : Modern Applications, Challenges and Future Trends Dr. Khalid Saqr
Computational fluid dynamics (CFD) is summarized as being used across various industries and fields. Modern CFD codes are built from modules that define geometry, boundary conditions, solution methods, and more. Commercial codes are more user-friendly while open-source codes allow more customization. CFD has applications in industry, medicine, homeland security, and combustion modeling. Contemporary challenges include improving physical models, computational requirements, and validation. Future trends may include mesh-free methods, low-cost high-performance computing, and runtime validation concepts.
This document provides an overview of the ANSYS Fluent tutorial guide:
- The guide contains 12 chapters that walk through tutorials of increasing complexity covering topics such as fluid flow, heat transfer, compressible flow, radiation, and rotating reference frames.
- It assumes the user has a basic understanding of fluid mechanics and CFD concepts and guides them through setting up and solving simulations in ANSYS Fluent.
- Each tutorial contains sections for problem setup, defining models and boundary conditions, obtaining solutions, and examining results to build the user's skills in using ANSYS Fluent for various CFD applications.
Hydrogen is the lightest element with an atomic number of 1. It resembles both alkali metals and halogens in some properties, making its position in the periodic table anomalous. Hydrogen shares properties with alkali metals like electronic configuration and electropositive character, but also shares properties with halogens like electronic configuration near a noble gas and diatomic molecules. Hydrogen differs from alkali metals in properties like ionization enthalpy and nature of compounds. It differs from halogens in tendency to form hydrides and lack of unshared electron pairs. Hydrogen is produced commercially through electrolysis of water and by reaction of steam on coke. Its uses include as a reducing agent and in fuel cells. Hyd
Computational fluid dynamics (CFD) is a tool for analyzing systems involving fluid flow, heat transfer and associated phenomena like chemical reactions using computer-based simulations. It involves numerically solving the governing equations of fluid flow to model the flow of liquids and gases. CFD complements experimental and theoretical fluid dynamics by providing a cost-effective means of simulating real flows. It has various applications in aerospace, automotive, turbo machinery, power plants, buildings, environmental engineering, and biomedical areas.
This document provides information about hydrogen for a chemistry seminar. It discusses the discovery of hydrogen, its physical and chemical properties, how it is produced, stored, and its reactions. It also covers hydrogen's position in the periodic table and the properties of its three naturally occurring isotopes: protium, deuterium, and tritium.
This document discusses laminar and turbulent flow in pipes. It defines the critical Reynolds number that distinguishes between the two flow regimes. For non-circular pipes, it introduces the hydraulic diameter to characterize the pipe geometry. The document then covers topics such as the developing flow region, fully developed flow profiles and pressure drop, the friction factor, minor losses, pipe networks, and pump selection.
Flow Inside a Pipe with Fluent Modelling Andi Firdaus
This document describes a numerical simulation of laminar and turbulent flow inside a pipe using Fluent software. The simulation models water flow inside a 1m diameter pipe that is 20m long. Two models are considered: laminar flow at a Reynolds number of 300 and turbulent flow at 8500. Theoretical equations for laminar and turbulent velocity profiles, entrance length, and Reynolds number correlations are presented. The numerical simulation sets up the models with appropriate boundary and material properties to solve the steady-state Navier-Stokes equations and compare results to experimental data.
The lecture was delivered by me for IIChE students chapter on the theme of Student-Industry Interaction at Bharati Vidyapeeth on 8th Feb'14. Foe my blogs kindly refer: https://www.learncax.com/knowledge-base/blog/by-author/ganesh-visavale
Calculation of pipeline capacity using steady state and dynamic simulation an...Waqas Manzoor
The document discusses the calculation of pipeline capacity using steady state and dynamic simulation in Aspen HYSYS as well as the Weymouth equation. It provides the composition and properties of natural gas, describes performing steady state and dynamic simulations, and calculates pipeline capacity using the Weymouth equation with input parameters like pipeline diameter, length, inlet/outlet pressures and temperatures, gas properties, and compressibility factor. The calculated flow rate using the Weymouth equation is 4.251 MMscfd.
This document discusses cryogenics and its applications. Cryogenics involves producing and studying very low temperatures, from around -100°C to absolute zero. Common cryogenic liquids used are liquid nitrogen and helium. Liquid nitrogen condenses around -196°C and freezes at -210°C, while liquid helium boils at -269°C and does not freeze at atmospheric pressure. Cryogenic technology is used in rocket propulsion systems, medical cryosurgery, manufacturing, electronics, and fuel research. Some key applications include aerospace cryogenic engines, medical cryosurgery, frozen food transportation, and blood banking.
Presentation on Calculation of Polytropic and Isentropic Efficiency of natura...Waqas Manzoor
This presentation demonstrates comparison of calculation of Polytropic and Isentropic Efficiency of Natural Gas Compressor using Aspen HYSYS & using Manual Calculations. Complete derivation of equations of Polytropic and Isentropic efficiency, have also been demonstrated. The slight difference observed in the manually calculated values and Aspen HYSYS simulation, may be attributed to the calculation method of the software which is based on numerical integration.
Cryogenic technology involves using rocket propellants at extremely low temperatures. Liquid oxygen and hydrogen offer the highest energy efficiency for rocket engines. Some applications of cryogenic technology include space vehicles, grinding, superconductivity, food industry, and body preservation. The United States was the first to develop cryogenic rocket engines using liquid oxygen and hydrogen. India has also successfully launched rockets using cryogenic technology. The process involves pressurizing and pumping liquid nitrogen for cooling before combustion in the engine's nozzle. Advantages include high energy per unit mass of propellants, clean combustion producing only water vapor, and low cost of liquid oxygen compared to other fuels.
1) Flow through pipes connected in series was analyzed. Head loss is calculated as the sum of losses in each pipe plus local losses at connections. Total head loss (H) equals the height difference between reservoirs.
2) Flow through pipes connected in parallel was also examined. The total flow (Q) equals the sum of individual pipe flows (Q1 + Q2). If pipe characteristics are the same, head loss will be equal in each pipe.
3) An example problem demonstrated calculating flow rate (Q) through two pipes in series where diameter changes over length. Q was found to be 0.158 m3/s. A second example calculated flow rates for two parallel pipes and the diameter required to replace
Computational fluid dynamics (CFD) is a branch of fluid mechanics that uses numerical analysis and data structures to analyze and solve problems that involve fluid flows. CFD uses three-dimensional simulations of fluid flow by solving the Navier-Stokes equations with computational algorithms and systems. It gives a comprehensive flow field view not possible through experimental testing alone. CFD has advantages of low cost, speed, ability to simulate real and ideal conditions, and providing comprehensive flow parameter information. Limitations include reliance on accurate physical models, presence of numerical errors, and accuracy of boundary conditions provided. CFD has applications in aerospace, automotive, HVAC, bio-medical, and other industries. Commercial CFD software packages are available
This document summarizes an experiment that investigates the relationship between water pressure and flow rate. Water was flowed from a container through a small hole for timed intervals at varying water heights, and the resulting flow rate was measured. The data showed a proportional relationship between pressure difference and squared flow rate, supporting Bernoulli's equation. The slope of the line of best fit remained constant, as expected for this experimental setup. Limitations included the assumption of zero kinetic energy and challenges closing the hole precisely.
Aiga-safe practices guide for cryogenic air separation plantstraccess
The document provides guidance on safe practices for operating cryogenic air separation plants. It discusses typical features of air separation units including air compression, contaminant removal, heat exchange, distillation, and expansion. It covers health hazards, plant design considerations, intake air quality, equipment such as compressors, expanders, pumps, coldboxes, control systems, product handling, piping, shutdown procedures, maintenance, and operations. The document aims to inform safe operation of these plants.
This document provides guidance on designing irrigation systems. It discusses key concepts like water flow in pipes, hydrostatic pressure, pressure head, total head, head loss, and lateral pipe characteristics. The document presents examples of calculating water velocity, flow rate, pipe diameter, and pressure at different points in an irrigation system. It also discusses alternatives for designing manifolds and ensuring even distribution of pressure and water across subplots. The overall aim is to provide practical methods for designing efficient pressure irrigation systems.
This presentation deals with the basic knowledge and easy concept of cryogenics that can help to bring up your basic knowledge about cryogenics.
This basically contains the history and applications of cryogenic technology.
This document describes the design of a plant for cryogenic distillation of air into oxygen and nitrogen. It includes an introduction to air separation and the cryogenic process. Process equipment like compressors, heat exchangers, and distillation columns are designed. Mass and energy balances are performed. The distillation columns and condenser are designed and specifications are provided. An economic analysis includes capital costs, production costs, profitability metrics, payback period and safety considerations. References for design methods are also listed.
CFD : Modern Applications, Challenges and Future Trends Dr. Khalid Saqr
Computational fluid dynamics (CFD) is summarized as being used across various industries and fields. Modern CFD codes are built from modules that define geometry, boundary conditions, solution methods, and more. Commercial codes are more user-friendly while open-source codes allow more customization. CFD has applications in industry, medicine, homeland security, and combustion modeling. Contemporary challenges include improving physical models, computational requirements, and validation. Future trends may include mesh-free methods, low-cost high-performance computing, and runtime validation concepts.
This document provides an overview of the ANSYS Fluent tutorial guide:
- The guide contains 12 chapters that walk through tutorials of increasing complexity covering topics such as fluid flow, heat transfer, compressible flow, radiation, and rotating reference frames.
- It assumes the user has a basic understanding of fluid mechanics and CFD concepts and guides them through setting up and solving simulations in ANSYS Fluent.
- Each tutorial contains sections for problem setup, defining models and boundary conditions, obtaining solutions, and examining results to build the user's skills in using ANSYS Fluent for various CFD applications.
Hydrogen is the lightest element with an atomic number of 1. It resembles both alkali metals and halogens in some properties, making its position in the periodic table anomalous. Hydrogen shares properties with alkali metals like electronic configuration and electropositive character, but also shares properties with halogens like electronic configuration near a noble gas and diatomic molecules. Hydrogen differs from alkali metals in properties like ionization enthalpy and nature of compounds. It differs from halogens in tendency to form hydrides and lack of unshared electron pairs. Hydrogen is produced commercially through electrolysis of water and by reaction of steam on coke. Its uses include as a reducing agent and in fuel cells. Hyd
Computational fluid dynamics (CFD) is a tool for analyzing systems involving fluid flow, heat transfer and associated phenomena like chemical reactions using computer-based simulations. It involves numerically solving the governing equations of fluid flow to model the flow of liquids and gases. CFD complements experimental and theoretical fluid dynamics by providing a cost-effective means of simulating real flows. It has various applications in aerospace, automotive, turbo machinery, power plants, buildings, environmental engineering, and biomedical areas.
This document provides information about hydrogen for a chemistry seminar. It discusses the discovery of hydrogen, its physical and chemical properties, how it is produced, stored, and its reactions. It also covers hydrogen's position in the periodic table and the properties of its three naturally occurring isotopes: protium, deuterium, and tritium.
This document discusses laminar and turbulent flow in pipes. It defines the critical Reynolds number that distinguishes between the two flow regimes. For non-circular pipes, it introduces the hydraulic diameter to characterize the pipe geometry. The document then covers topics such as the developing flow region, fully developed flow profiles and pressure drop, the friction factor, minor losses, pipe networks, and pump selection.
Απολογισμός ερευνητικών & τεχνολογικών δραστηριοτήτων του ΙΤΣΑΚ για το 2016. Κατάλογος ενεργών ερευνητικών προγραμμάτων, δημοσιεύσεων και άλλων δραστηριοτήτων.
Τα θέματα στη Φυσική Προσανατολισμού για τις Πανελλήνιες 2024
Τμήμα Χημικών Μηχανικών Πανεπιστημίου Πατρών 2014
1. Το Τμήμα Χημικών Μηχανικών
Του Πανεπιστημίου Πατρών
Δημήτρης Ματαράς
2. Συμπληρώθηκαν 36 χρόνια από την πρώτη χρονιά κατά
την οποία το ΤΧΜ δέχτηκε φοιτητές
Ξεκίνησε στα πλαίσια της ενιαίας πολυτεχνικής σχολής
το 1978 και έγινε ανεξάρτητο τμήμα με αρχικά 5 μέλη
ΔΕΠ το 1982
Το 1984 με πρωτοβουλία μελών ΔΕΠ του Τμήματος
ιδρύθηκε το ΕΙΧΗΜΥΘ (σήμερα ΙΕΧΜΗ)
Το 1991 μεταφέρθηκε στο δικό του κτίριο
Το 2010 παραδόθηκε το καινούριο κτίριο επέκτασης
Σύντομο Ιστορικό
Το Τμήμα Χημικών Μηχανικών ΠΠ
3. Οι πρώτοι φοιτητές σε επίσκεψη στο Αλουμίνιο της Ελλάδος
Διακρίνονται οι καθηγητές Κώστας Βαγενάς και Άλκης Παγιατάκης.
«Φωτογράφος» ο καθηγητής Γιώργος Παπαθεοδώρου
5. Το Τμήμα συμμερίζεται, σήμερα πιο πολύ από ποτέ, τις
αρχές και τους στόχους του αρχικού οράματος, ενός
τμήματος διεθνών προδιαγραφών με βασικούς άξονες
την αξιοκρατία και την ποιότητα
Αποστολή του Τμήματος είναι:
1. Η εκπαίδευση των φοιτητών στη χημική μηχανική και
τη χημική τεχνολογία από το προπτυχιακό μέχρι το
προχωρημένο μεταπτυχιακό επίπεδο και
2. Η παραγωγή γνώσης στην επιστήμη της χημικής
μηχανικής
Αποστολή του ΤΧΜ
Το Τμήμα Χημικών Μηχανικών ΠΠ
6. Η δημιουργία μέσω της εκπαίδευσης ισχυρού υποβάθρου στις
βασικές επιστήμες (μαθηματικά, φυσική και χημεία), καθώς και
στην επιστήμη της χημικής μηχανικής, μέσα από μια διαδικασία
που περιλαμβάνει την πρόσληψη εμπειρίας, την ανάλυση, τη
σύνθεση και τον έλεγχο υποθέσεων και ερμηνειών
Η προετοιμασία της επαγγελματικής σταδιοδρομίας και της
ανταγωνιστικότητας των αποφοίτων μας μέσα από την κατανόηση
της επιστήμης με σύγχρονα τεχνολογικά μέσα και μεθόδους,
βασισμένες τόσο στη βιβλιογραφία όσο και στην έρευνα
Η ανάπτυξη της ικανότητας των αποφοίτων μας, μέσα σε μια
ταχύτατα τεχνολογικά αναπτυσσόμενη κοινωνία και παγκόσμια
οικονομία, να συνεχίζουν τη διανοητική τους εξέλιξη,
«μαθαίνοντας να μαθαίνουν»
Στόχοι
Το Τμήμα Χημικών Μηχανικών ΠΠ
7. Η παραγωγή γνώσης μέσω της έρευνας σε θεμελιώδες και
εφαρμοσμένο επίπεδο τόσο σε περιοχές της χημικής μηχανικής
όσο και σε διεπιφάνειες με άλλες περιοχές και διεπιστημονικά
πεδία, παρακολουθώντας τις εξελίξεις της επιστήμης και
επεκτείνοντας το πεδίο εφαρμογής της
Η συμβολή μας στην προσπάθεια ανασυγκρότησης και ανάπτυξης
της ευρύτερης περιοχής και της χώρας, σε συνεργασία με
παραγωγικούς φορείς και επιχειρήσεις και μέσω του
παραδείγματος αριστείας, της έρευνας και της καινοτομίας
Στόχοι
Το Τμήμα Χημικών Μηχανικών ΠΠ
10. Πρότυπο φωτοβολταϊκό πάρκο ισχύος 10 kW διασυνδεδεμένο στο δίκτυο.
Η πρωτοτυπία του συγκεκριμένου έργου είναι ότι χρησιμοποιεί ταυτόχρονα
φωτοβολταϊκά πάνελ 6 διαφορετικών τεχνολογιών (c-Si, polyc-Si, a-Si:H,
Micromorph, Het-Si και CIGS) επιτρέποντας τη συγκριτική παρακολούθηση
όλων των χαρακτηριστικών τους και των καιρικών συνθηκών σε πραγματικές
συνθήκες.
Φωτοβολταϊκό Πάρκο
Το Τμήμα Χημικών Μηχανικών ΠΠ
17. Πρόεδρος (εκλέγεται από τα μέλη ΔΕΠ για μια διετία)
Ορίζει αναπληρωτή Πρόεδρο
Ορίζει και στελεχώνει τις επιτροπές
Συνέλευση, αποτελείται:
Όλα τα ενεργά μέλη ΔΕΠ (27)
1 εκπρόσωπο φοιτητών
1 εκπρόσωπο μεταπτυχιακών φοιτητών
1 εκπρόσωπο ΕΕΔΙΠ
1 εκπρόσωπο ΕΤΕΠ
Γενική Συνέλευση Ειδικής Σύνθεσης, αποτελείται:
Όλα τα ενεργά μέλη ΔΕΠ
Όλη η νομοθεσία που αφορά στη λειτουργία του Τμήματος βρίσκεται εδώ
Διοίκηση
Το Τμήμα Χημικών Μηχανικών ΠΠ
18. 1. Ακαδημαϊκής Ανάπτυξης και Ερευνητικής Πολιτικής
2. Διασφάλισης Ποιότητας
3. Προπτυχιακών Σπουδών (Πρόγραμμα, Κανονισμός κλπ)
4. Μεταπτυχιακών Σπουδών
5. Φοιτητικών Θεμάτων και Αποφοίτων
Σύμβουλος Καθηγητής, Γραφείο Αποφοίτων, Γραφείο Ενημέρωσης
6. Προβολής Έργου
Ιστότοπος, Οδηγός Σπουδών, Σχέσεις με ΚΠΠ
7. Οικονομικών
8. Κτιρίου και Υποδομών
9. Υγιεινής και Ασφάλειας
10. Πρακτικής Άσκησης
Επιτροπές
Το Τμήμα Χημικών Μηχανικών ΠΠ
19. Τομείς
Το Τμήμα Χημικών Μηχανικών ΠΠ
ΤΧΜ/ΠΠ
29 μέλη ΔΕΠ
ΤΟΜΕΑΣ Α
Μηχανική Διεργασιών
&
Περιβάλλον
ΤΟΜΕΑΣ Β
Χημική Τεχνολογία
&
Εφαρμοσμένη Φυσικοχημεία
ΤΟΜΕΑΣ Γ
Επιστήμη
&
Τεχνολογία Υλικών
10 Μέλη ΔΕΠ
10 Μέλη ΔΕΠ
9 Μέλη ΔΕΠ
20. Το Τμήμα διατηρεί πολύ καλές σχέσεις με τα άλλα 2
ελληνικά τμήματα χημικών μηχανικών
Συνδιοργανώνει μαζί τους το Πανελλήνιο Επιστημονικό
Συνέδριο Χημικής Μηχανικής (10ο ΠΕΣΧΜ -Πάτρα )
Έχει συναντήσεις συντονισμού
Σχέσεις με τα άλλα Τμήματα
Το Τμήμα Χημικών Μηχανικών ΠΠ
36. Δείκτης h
Το Τμήμα Χημικών Μηχανικών ΠΠ
43
48
54
59 60
66 66 68
73 75
78
81
87
90
108 110
113
120 120
134
140
146
h δημοσιεύσεις έχουν πάρει τουλάχιστον h αναφορές
37. Δείκτης m
Το Τμήμα Χημικών Μηχανικών ΠΠ
0.80
0.93 0.96 0.98
1.04
1.10
1.20
1.31 1.33 1.35 1.38 1.40
1.52
1.58 1.59 1.61
1.69 1.70
1.84
2.00 2.00
2.27
2.35
0.00
0.50
1.00
1.50
2.00
2.50
m
𝑚 =
ℎ
Έτη από την πρώτη δημοσίευση
38. Την περίοδο 2008-2013:
Μέσο ύψος Ερευνητικής Χρηματοδότησης ~86 Κ€/ΔΕΠ/Έτoς
Μέσο ύψος ‘Κρατικής’ χρηματοδότησης ~13.7 Κ€/ΔΕΠ/Έτος
Δημοσιεύσεις σε έγκριτα διεθνή περιοδικά 4/ΔΕΠ/Έτος
Ετεροαναφορές ~155/ΔΕΠ/Έτος (~180 για το 2013)
Συνολικά από το 1982:
Δημοσιεύσεις: 1772
Αναφορές: 35350
Αναφορές/Δημοσίευση: 20
Μέσο h-index των μελών ΔΕΠ (Νοέμβριος 2013): 22.5
h-index Τμήματος : 75
m-index Τμήματος : 2.27
Συνολική Εικόνα
Το Τμήμα Χημικών Μηχανικών ΠΠ
39. Το Τμήμα έχει στην συντριπτική πλειοψηφία του
απόλυτα θετική στάση απέναντι στην αξιολόγηση
Ανασύνταξη – μείωση της εντροπίας
Κριτική αναθεώρηση
Το Τμήμα είχε αξιολογηθεί, όσον αφορά το Μεταπτυχιακό
Πρόγραμμα Σπουδών του το 2004, από Εξωτερική Επιτροπή
(Γεωργάκης, Μπερής, Γογγολίδης) που είχε προσκληθεί με δική
του πρωτοβουλία
Είχε προετοιμαστεί από το 2011 αλλά η αξιολόγηση δεν έγινε…
Παρακολουθεί συστηματικά ανεξάρτητες εξωτερικές πηγές
Ελπίζει ότι η διαδικασία αξιολόγησης δεν θα είναι η τελευταία…
Το ΤΧΜ και η Αξιολόγηση
Το Τμήμα Χημικών Μηχανικών ΠΠ
40. Αξιολόγηση 2004: ‘Ο ρυθμός δημοσιεύσεων είναι ο
πρώτος ανάμεσα σε όλα τα τμήματα του
Πανεπιστημίου Πατρών και ο πρώτος ανάμεσα σε όλα
τα τμήματα Χημικών Μηχανικών της Ελλάδος ενώ και
μέσα στην Ευρώπη κατέχει μια από τις πρώτες θέσεις’
Αξιολόγηση 2013: ‘The department overall performs
research at an excellent level and can be considered
among the top European chemical engineering
departments’
Δείτε εδώ τα πλήρη κείμενα: (2004), (2013)
Εξωτερικές Αξιολογήσεις
Το Τμήμα Χημικών Μηχανικών ΠΠ
42. Οι ΧΜ στον κόσμο: από τα καλύτερα αμοιβόμενα
επαγγέλματα
ΧΜ=ο πολυσχιδής μηχανικός
Χημική Μηχανική: η Νο 1 ερευνητική περιοχή στην
Ελλάδα
Πάτρα: Κέντρο Αριστείας στη Χημική Μηχανική
Διάλεξα σωστά;
45. Παρακολουθείτε τακτικά τον επίσημο ιστότοπο:
www.chemeng.upatras.gr
Χρησιμοποιείτε το mail σας!!!
Η ηλεκτρονική Γραμματεία
https://progress.upatras.gr
To eclass: http://eclass.upatras.gr
Το ΤΧΜ/ΠΠ είναι στο facebook, Twitter, Linkedin
To group των φοιτητών στο facebook:
Xhmikoi Mhxanikoi Patras!
Το ΤΧΜ/ΠΠ στο διαδίκτυο
Το Τμήμα Χημικών Μηχανικών ΠΠ
46. Οδηγός Σπουδών 2014-2015
Έκθεση Εξωτερικής Αξιολόγησης
Έκθεση Εσωτερικής Αξιολόγησης
Το eclass των μαθημάτων
Γνωρίστε τους καθηγητές σας
Δείτε τις ιστοσελίδες τους
Εκμεταλευτείτε στο έπακρο τις ώρες για ερωτήσεις/απορίες
που υπάρχουν υποχρεωτικά για κάθε μάθημα. Είναι
αναρτημένες έξω από το γραφείο του καθηγητή και στο eclass
Στείλτε τους email
Δείτε τον Σύμβουλο Σπουδών
Τι πρέπει να κάνω;
Το Τμήμα Χημικών Μηχανικών ΠΠ
47. Συμμετέχετε: Παρακολουθείτε τα μαθήματα
Το διάβασμα δεν γίνεται στις εξετάσεις
Στο τέλος του εξαμήνου αξιολογήστε το μάθημα με
γνώμωνα το καλό του τμήματος και όχι τα προσωπικά
σας συναισθήματα και αντιλήψεις
Η αξιολόγηση είναι αυστηρά ανώνυμη
Τα ερωτηματολόγια πηγαίνουν κατευθείαν στη ΜΟΔΙΠ
Ο καθηγητής δεν παίρνει ποτέ στα χέρια του τα ερωτηματολόγια
Μετά την έκδοση των αποτελεσμάτων του κοινοποιούνται τα
στατιστικά στοιχεία
Τι πρέπει να κάνω;
Το Τμήμα Χημικών Μηχανικών ΠΠ
48. Εγγράφεστε υποχρεωτικά κάθε εξάμηνο
Δηλώνετε μαθήματα κάθε εξάμηνο
Το εξάμηνο διαρκεί 13 εβδομάδες
Είμαστε υποχρεωμένοι να αναφέρουμε κάθε διδακτική ώρα που
χάθηκε (ανεξαρτήτως λόγου)
Πρέπει να πάρετε δίπλωμα σε 7 χρόνια το πολύ (μέχρι
το 2021)
Σεβαστείτε και Προστατέψτε το χώρο
Τον έχετε πληρώσει και ανήκει σε όλους μας
Μας αντιπροσωπεύει όλους, τουλάχιστον όσο και η προσωπική
μας εμφάνιση
Προσπαθείστε να μην ξεχάσετε
Το Τμήμα Χημικών Μηχανικών ΠΠ
49. Η προσπάθεια μόλις τώρα αρχίζει
Τα πρώτα εξάμηνα έχουν εξαιρετική σημασία
Μην ακούτε διαδόσεις – διαπιστώστε μόνοι σας
Ο βαθμός του πτυχίου «μετράει». Ανοίγει ή κλείνει
δρόμους
Το επίπεδο και η φήμη του Τμήματος σας ακολουθούν
σε όλη σας την επαγγελματική ζωή
Προσπαθείστε να μην ξεχάσετε
Το Τμήμα Χημικών Μηχανικών ΠΠ
Editor's Notes
Εφέτος συμπληρώνονται 35 χρόνια από την πρώτη χρονιά λειτουργίας του Τμήματος το 1978, οπότε δέχτηκε τους πρώτους 24 φοιτητές.
Το Τμήμα Ξεκίνησε σαν μέρος της πολυτεχνικής σχολής και έγινε ανεξάρτητο όπως και τα άλλα τμήματα της πολυτεχνικής το 1982.
Σημαντικός σταθμός στην πορεία του Τμήματος είναι αναμφίβολα η ίδρυση, με πρωτοβουλία μελών του, του Ερευνητικού Ινστιτούτου Χημικής Μηχανικής και Υψηλών Θερμοκρασιών. Το Ινστιτούτο έδωσε διέξοδο στην δημιουργικότητα των μελών ΔΕΠ από την πολύ γραφειοκρατική και δυσκίνητη τότε λειτουργία των υπηρεσιών του πανεπιστημίου. Τα πρώτα χρόνια στεγάστηκε σε όποιον χώρο βρισκόταν διαθέσιμος και αυτό κράτησε μέχρι το 1991 οπότε παραδόθηκε το κεντρικό κτίριο με επιφάνεια άνω των 10000 τμ και αργότερα το μικρότερο κτίριο επέκτασης στο οποίο βρισκόμαστε τώρα.
Στη σημερινή ιδιαίτερα δύσκολη συγκυρία για τη χώρα και για τα ελληνικά πανεπιστήμια, το Τμήμα συμμερίζεται…
Πιστεύουμε ότι με αυτό τον τρόπο μπορούμε να έχουμε μια όχι ευκαταφρόνητη συμβολή στην έξοδο από την κρίση.
Η αποστολή του Τμήματος όπως την αντιλαμβανόμαστε, είναι: 1, 2
Αυτό εξειδικεύεται στα παρακάτω
Ξεκινάμε με τις εγκαταστάσεις. Μια φωτογραφία του κεντρικού κτιρίου, το οποίο θα έχουμε την ευκαιρία να επισκεφτούμε τις δυο επόμενες ημέρες
Το Τμήμα στεγάζεται σε δύο κτίρια: Το Κεντρικό και το κτίριο Επέκτασης που βλέπετε εδώ χωροταξικά τοποθετημένα ανάμεσα στους μηχανολόγους και τους χημικούς και σε πολύ μικρή απόσταση από την κεντρική βιβλιοθήκη.
Στην ταράτσα του κεντρικού κτιρίου υπάρχει ένα μικρό πρότυπο φωτοβολταϊκό πάρκο
Στα Ισόγεια των δύο κτιρίων υπάρχουν 5 αίθουσες διδασκαλίας, 2 εργαστήρια υπολογιστών και 4 χώροι εκπαιδευτικών εργαστηρίων, ενώ στους ορόφους και το υπόγειο του κεντρικού κτιρίου είναι ερευνητικοί χώροι και γραφεία. Επίσης στο υπόγειο υπάρχει μια μεγάλη αίθουσα η οποία χρησιμοποιείται κυρίως από την χορωδία του πανεπιστημίου και εμείς τη χρησιμοποιούμε για ορισμένες εκδηλώσεις, όπως την υποδοχή των πρωτοετών φοιτητών
Το Τμήμα διαθέτει σημαντικό ερευνητικό εξοπλισμό, τον οποίο θα έχετε την ευκαιρία να δείτε. Αξίζει να σημειωθεί ότι μέλη ΔΕΠ έχουν επίσης πρόσβαση σε σημαντικές κεντρικές εγκαταστάσεις και το Ινστιτούτο, ενώ το Τμήμα έχει επίσης επενδύσει σε μια σειρά κοινόχρηστων όργανων όπως…
Η τελευταία σημαντική προσθήκη είναι ένα environmental FESEM χορηγία ανώνυμου δωρητή μέσω LIMMAT Foundation
Να μιλήσουμε για το προσωπικό και τη λειτουργία του Τμήματος
Το Τμήμα δεν ξεπέρασε ποτέ τα 30 μέλη ΔΕΠ, ενώ και το υπόλοιπο προσωπικό του ήταν πάντα περιορισμένο αναλογικά σε σχέση με τα άλλα τμήματα του ΠΠ.
Από το καλοκαίρι προστέθηκαν στη δύναμη του Τμήματος με απόφαση της Συγκλήτου 4 μέλη ΔΕΠ από το Γενικό Τμήμα το οποίο διαλύθηκε. Τα δύο από αυτά θα αποχωρήσουν μέχρι το τέλος του Ακαδημαϊκού έτους ενώ αναμένεται να διοριστεί ένας επίκουρος καθηγητής.
Εξ’ όσων γνωρίζουμε αυτή τη στιγμή, η μείωση του λοιπού προσωπικού του Τμήματος λόγω απολύσεων και συνταξιοδοτήσεων θα είναι περίπου 5 άτομα.