This document discusses hydroplaning and roadway tort liability. It summarizes the different types of hydroplaning, including viscous and dynamic hydroplaning. Viscous hydroplaning occurs at low speeds due to a thin film of water on smooth pavement, while dynamic hydroplaning occurs at higher speeds due to a thicker layer of water. The document also outlines factors that influence hydroplaning risk, including rainfall levels, roadway characteristics like texture, tire tread depth and inflation, and driver speed in wet conditions. Ultimately, hydroplaning is a complex phenomenon dependent on many interacting variables and is a relatively rare event.
The document discusses factors that contribute to pavement deterioration over time, including traffic loading, climate conditions, and drainage issues. It also outlines different methods for evaluating pavement condition, such as measuring roughness, distress, and skid resistance. Preventative maintenance is highlighted as the most cost-effective approach for extending pavement life and performance. Proper design, construction, and material selection can help minimize early deterioration, while regular maintenance and rehabilitation are needed to avoid more costly repairs from deferred maintenance.
INVESTIGATING CAUSES OF PAVEMENT DETERIORATION IN KHARTOUM STATEIAEME Publication
It is quite essential to investigate the causes of pavement deterioration in order to select the proper maintenance technique. The objective of this study was to identify factors cause deterioration of recently constructed roads in Khartoum state. A comprehensive literature concerning the factors of road deterioration, common road defects and their causes were reviewed. Three major road projects with different deterioration reasons were selected for this study. The investigation involved field survey and laboratory testing on those projects to examine the existing pavement conditions.
Permeability measurement and scan imaging to assess clogging of pervious conc...Jahzeel Suarez
This document summarizes a study that measured the permeability of 20 pervious concrete parking lots in California using an NCAT field permeameter. Factors like traffic volume, erosion, vegetation, cracking, maintenance practices, rainfall, temperature, sediment accumulation, and pavement age were also collected. Seven core samples from four parking lots were analyzed using CT scans to assess porosity profiles and clogging. Statistical analysis found pavement age and accumulated fine sediment (<38 mm) were most influential on permeability. CT scans showed clogging generally within the top 25 mm but sometimes as deep as 100 mm. The study aimed to better understand permeability reduction and clogging in pervious concrete pavements.
This review article summarizes research on factors that control skid resistance at the tire-pavement interface. It discusses key parameters such as surface texture, tire tread, temperature, and loading conditions. Pavement macrotexture, characterized by mean texture depth, is identified as the most important factor for skid resistance. Microtexture and factors that reduce surface asperities like traffic polishing also significantly impact skid resistance over time. The article provides an overview of different methods to measure skid resistance and texture in both laboratory and field settings.
Bad drainage and its effects on road pavement conditions in nigeriaAlexander Decker
Poor drainage has significant negative effects on road pavement conditions in Nigeria. Inadequate drainage systems are common and allow water to accumulate on and penetrate into road surfaces. This leads to increased moisture content in road materials, reduced strength, mud pumping, cracking, stripping of asphalt, and damage from frost. The investigation found drainage deterioration and blockages contribute greatly to road deterioration in Nigeria. Maintaining proper drainage design, cross slopes, and drainage channel maintenance are important to effectively drain water and prevent moisture issues that compromise pavement integrity.
The document discusses the key elements of highway geometric design, including cross-section elements, sight distance considerations, horizontal and vertical alignment details, and intersection elements. It outlines several design factors that control geometric design, such as design speed, topography, traffic factors, and environmental factors. Specific cross-section elements covered include pavement surface type and properties, cross slope or camber to drain water, and recommended camber values.
Managing stormwater runoff is challenging for urban areas due to increasing amounts of impermeable surfaces like roads and sidewalks. This causes problems like flooding and reduced water quality. Permeable pavement is an effective strategy for stormwater management that allows water to infiltrate instead of running off. It comes in forms like pervious concrete, porous asphalt, and interlocking pavers. Permeable pavement provides environmental benefits such as reduced flooding, increased groundwater recharge, and improved water quality by filtering pollutants from runoff.
The document discusses factors that contribute to pavement deterioration over time, including traffic loading, climate conditions, and drainage issues. It also outlines different methods for evaluating pavement condition, such as measuring roughness, distress, and skid resistance. Preventative maintenance is highlighted as the most cost-effective approach for extending pavement life and performance. Proper design, construction, and material selection can help minimize early deterioration, while regular maintenance and rehabilitation are needed to avoid more costly repairs from deferred maintenance.
INVESTIGATING CAUSES OF PAVEMENT DETERIORATION IN KHARTOUM STATEIAEME Publication
It is quite essential to investigate the causes of pavement deterioration in order to select the proper maintenance technique. The objective of this study was to identify factors cause deterioration of recently constructed roads in Khartoum state. A comprehensive literature concerning the factors of road deterioration, common road defects and their causes were reviewed. Three major road projects with different deterioration reasons were selected for this study. The investigation involved field survey and laboratory testing on those projects to examine the existing pavement conditions.
Permeability measurement and scan imaging to assess clogging of pervious conc...Jahzeel Suarez
This document summarizes a study that measured the permeability of 20 pervious concrete parking lots in California using an NCAT field permeameter. Factors like traffic volume, erosion, vegetation, cracking, maintenance practices, rainfall, temperature, sediment accumulation, and pavement age were also collected. Seven core samples from four parking lots were analyzed using CT scans to assess porosity profiles and clogging. Statistical analysis found pavement age and accumulated fine sediment (<38 mm) were most influential on permeability. CT scans showed clogging generally within the top 25 mm but sometimes as deep as 100 mm. The study aimed to better understand permeability reduction and clogging in pervious concrete pavements.
This review article summarizes research on factors that control skid resistance at the tire-pavement interface. It discusses key parameters such as surface texture, tire tread, temperature, and loading conditions. Pavement macrotexture, characterized by mean texture depth, is identified as the most important factor for skid resistance. Microtexture and factors that reduce surface asperities like traffic polishing also significantly impact skid resistance over time. The article provides an overview of different methods to measure skid resistance and texture in both laboratory and field settings.
Bad drainage and its effects on road pavement conditions in nigeriaAlexander Decker
Poor drainage has significant negative effects on road pavement conditions in Nigeria. Inadequate drainage systems are common and allow water to accumulate on and penetrate into road surfaces. This leads to increased moisture content in road materials, reduced strength, mud pumping, cracking, stripping of asphalt, and damage from frost. The investigation found drainage deterioration and blockages contribute greatly to road deterioration in Nigeria. Maintaining proper drainage design, cross slopes, and drainage channel maintenance are important to effectively drain water and prevent moisture issues that compromise pavement integrity.
The document discusses the key elements of highway geometric design, including cross-section elements, sight distance considerations, horizontal and vertical alignment details, and intersection elements. It outlines several design factors that control geometric design, such as design speed, topography, traffic factors, and environmental factors. Specific cross-section elements covered include pavement surface type and properties, cross slope or camber to drain water, and recommended camber values.
Managing stormwater runoff is challenging for urban areas due to increasing amounts of impermeable surfaces like roads and sidewalks. This causes problems like flooding and reduced water quality. Permeable pavement is an effective strategy for stormwater management that allows water to infiltrate instead of running off. It comes in forms like pervious concrete, porous asphalt, and interlocking pavers. Permeable pavement provides environmental benefits such as reduced flooding, increased groundwater recharge, and improved water quality by filtering pollutants from runoff.
1. The document discusses a study that uses finite element modeling to simulate subsurface drainage in roadways.
2. The study models unsaturated water flow through pavement layers using Richards equation and examines how layer properties like hydraulic conductivity affect drainage system performance.
3. The modeling reveals that subsurface drainage system performance depends not only on edge drain design but also on subgrade layer properties, with drainage decreasing as subgrade hydraulic conductivity increases.
INVESTIGATING SURFACE DRAINAGE PROBLEM OF ROADS IN KHARTOUM STATEIAEME Publication
This document investigates surface drainage problems of roads in Khartoum State, Sudan. It assesses the current condition of roads and drainage structures through field surveys. Poor drainage was found to contribute significantly to pavement deterioration. Causes included blocked drainage structures from waste, inadequate inlets and outlets, erosion, and lack of maintenance. These drainage issues led to severe road damage. The study recommends designing and constructing adequate drainage systems and applying proper maintenance to improve pavement performance and lifespan.
CAUSES OF HIGHWAY FAILURE IN NIGERIA ORIGINALAliyu Hamza
The document discusses the causes of highway failure in Nigeria. It identifies several key causes: moisture penetration into pavement layers from inadequate drainage systems, cracks in the pavement surface, and lack of consideration of subsurface geological conditions during the design process. Poor drainage is a major issue, as it can lead to a reduction in the strength of pavement layers over time from excessive water content. The document also examines the different layers that make up flexible and rigid pavements and their functions. It provides details on common defects seen in Nigerian roads like cracks, potholes, and edge deterioration.
This document discusses road failures and the importance of road maintenance. It notes that roads are the primary mode of transportation for passengers and goods in most areas. Inadequate road infrastructure can hinder socioeconomic development. Road maintenance is crucial to ensure a smooth surface for travel and prevent accidents. Over time, roads require maintenance due to various types of failures from minor cracks to major issues. Proper maintenance approaches are needed to minimize these failures and keep roads in good condition for safe transportation.
Screening Hydroplaning Risk Area By Hsd DataDr Wei Liu
According to road safety reports from various RCAs, about 30%-40% of road crashes occurred in wet conditions and among these wet road crashes, at least 50% of the drivers experienced loss-of-control of the vehicle in a partial or full degree, an indication of hydroplaning, which often resulted in serious injury or even fatal accidents. Unfortunately, risk of hydroplaning is often only considered in the design stage of roads and highways by providing sufficient drainage and proper selection of surface materials. During the operation and maintenance of roads and highways, there is still no direct and practical method to quantify hydroplaning risk for existing roads and highways.
Although several vehicle, roadway, and environmental factors affect the probability of hydroplaning, a general rule of thumb for highways is that hydroplaning can be expected for speeds above 70kph where water ponds to a depth of 2.5mm or greater over a distance of 10m or greater. In other words, for any set of driver inputs, tyre conditions and surfacing material, hydroplaning is only a function of water depth and vehicle speed. In this paper, a methodology for identifying and screening of hydroplaning risk area through analyzing the pavement transverse and longitudinal profile measurement from HSD survey will be introduced. Examples will be given to demonstrate that it will be a useful tool for road controlling agencies to evaluate the risk of hydroplaning for their road networks and to plan and carry out necessary maintenance actions to provide a safer road network for the public.
The document discusses evaluating skid resistance on national roads in the Podlaskie province of Poland. Skid resistance is the ability of a road surface to resist the relative motion between the tire and pavement, which is important for safety. It is characterized by the coefficient of friction and is crucial when roads are wet, as it affects braking distances and vehicle stability when turning. Many dangerous areas on roads with high traffic, such as roundabouts and pedestrian crossings, are at risk of skidding. The thesis will study and evaluate the properties of skid resistance on selected national roads in the province from 2008 to 2013 using an SRT-3 device to measure the coefficient of friction in wet conditions during braking.
Module 5: Highway Drainage and Highway EconomicsDhananjayM6
The document discusses highway drainage, which involves removing surface and subsurface water from roadways. Excess water can damage pavement and cause failures. The drainage system includes surface drains to remove surface water runoff, and subsurface drains to intercept groundwater. Surface drainage components are the road crown or slope, cross drains, and roadside drains. Hydrologic analysis estimates maximum runoff quantity using factors like rainfall intensity and drainage area. Hydraulic analysis then designs drains to convey this water away. The document provides examples to demonstrate designing a surface drainage system.
Nigeria has a matured flexible pavement road network owned by the public sector called the Federal Road. The 72km road networks from Ilesha – Akure are providing excellent service to road users for interstate movement. Due to movement of vehicles on the road, bitumen pavements tend to crack at some point of their lives under the combined action of traffic and the environment. These cracks are defects in the pavement surfacing which weaken the pavement and allow water to penetrate and cause potholes on the pavement. The results of a study conducted to facilitate the development of road pavement performance models that are appropriate for Nigeria and other similar developing countries, which could predict the rate of deterioration over their lifespan, have been presented. Comprehensive investigations were carried out on the expressway from the Federal University of Technology (FUTA) North Gate to NNPC Mega Station in Akure, Ondo State – apparently one of the busiest section along the road. The data collected are on traffic characteristics, Structural Number (pavement thickness), potholes and other distress types. Using these data and with the help of stepwise regression analysis, models were developed to predict the road pavement deterioration within the area of study and that could be useful for evaluating the failure susceptibility of the road. The calibrated model has 98.8% and 98.7% as R2 and adjusted R2 respectively. The model also has 8.8% (as average) difference between the predicted and actual rate of deterioration. The model can therefore, be used for planning maintenance programs of flexible pavement roads.
Enhancing Rainwater Harvesting through Pervious Pavement System Based on the ...civejjour
Pervious pavements are widely used in stormwater management practices due to their porosity.
However, the longevity and infiltration capacity could be greatly reduced with time due to
clogging issues. DakeRechsand manufactures pervious bricks from desert sand based on
principle of surface-free energy treatment. The pavers are made from desert sand that can
withstand against temperatures as high as 100 degrees Celsius and also handling freeze-thaw
cycle testing. This product range contains silica as the base material, has good anti-slippery
performance when wet. And observations showed that the there is less chance of black ice
formation on the brick surface, due to air-permeable propertities of the material. The company
has completed hundreds of projects mainly in China. Utilizing breathable desert sand using the
surface free energy is something not mastered before and DakeRechsand introduces an ecofriendly, sediment-free, recyclable, and much efficient technology to enhance rainwater
harvesting and water conservation.
Enhancing Rainwater Harvesting through Pervious Pavement System Based on the ...civejjour
Pervious pavements are widely used in stormwater management practices due to their porosity.
However, the longevity and infiltration capacity could be greatly reduced with time due to
clogging issues. DakeRechsand manufactures pervious bricks from desert sand based on
principle of surface-free energy treatment. The pavers are made from desert sand that can
withstand against temperatures as high as 100 degrees Celsius and also handling freeze-thaw
cycle testing. This product range contains silica as the base material, has good anti-slippery
performance when wet. And observations showed that the there is less chance of black ice
formation on the brick surface, due to air-permeable propertities of the material. The company
has completed hundreds of projects mainly in China. Utilizing breathable desert sand using the
surface free energy is something not mastered before and DakeRechsand introduces an ecofriendly, sediment-free, recyclable, and much efficient technology to enhance rainwater
harvesting and water conservation.
Los investigadores han demostrado empíricamente que la fricción deslizante en la arena se reduce en gran medida añadiendo algo de agua ―pero no demasiada―.
Drainovia - Effective in all weather conditionsEurovia_Group
Porous asphalts are road surfacings that absorb and drain off rainwater, thereby limiting its harmful effects at the road surface. Motorists easily recognise this type of surfacing.
This document provides information on flexible pavement design and theory. It discusses the typical layers of a flexible pavement including the surface course, base course, and subgrade. It also outlines several factors that affect pavement design such as wheel load, climate, and material characteristics. Additionally, the document examines failures like fatigue cracking and rutting that pavement design aims to prevent. It provides guidance on mechanistic-empirical design as prescribed by the Indian Roads Congress.
The document discusses permeability and describes permeability as a property that measures how easily fluids can move through pore spaces in a material. It then discusses several methods to test permeability, including laboratory methods like the constant head and falling head permeability tests, and field methods like pumping tests. Finally, it outlines some common uses of permeability testing, such as determining suitability of soil for construction or wastewater treatment systems.
- Heavy rainfall during the Indian monsoon season causes severe damage to roads, including cracking and pothole formation. This disrupts road transport and increases accidents.
- Factors like poor drainage, low quality materials, and expansive subsoil exacerbate the effects of rain on roads. Rain weakens the bonding between bitumen and aggregates in asphalt roads.
- The study aims to analyze the impacts of rain on road transport and identify solutions to mitigate these impacts and reduce accidents. The researchers will inspect damaged roads and conduct surveys.
This document discusses subgrade design for flexible pavements. It describes how the subgrade strength, assessed using the California Bearing Ratio (CBR), depends on the soil type, density, and moisture content. It outlines three categories for estimating the design moisture content based on water table depth and climate. Design CBR is determined through laboratory testing of soil samples compacted to different densities and moisture contents. The design CBR must be assigned to one of six strength classes used in pavement thickness design. Estimates can also be made using a table correlating water table depth and soil type to strength class.
The document summarizes a study on evaluating longitudinal skid resistance on pavement surfaces in Bangalore City. Portable pendulum skid resistance testing was conducted on four road stretches under different conditions like dry, wet, with dry sand, and with oil. Texture depth was also measured using the sand patch method. International Friction Index (IFI) values were calculated from the wet skid resistance and texture depth measurements to allow comparison between different testing equipment. The study found skid resistance values decreased in wet, sandy, and oily conditions compared to dry conditions. Correlation charts showed higher skid resistance with increasing texture depth. The IFI standard practice for harmonizing friction measurements taken with different equipment was also summarized.
This document provides an overview of the Sigma Six model used to analyze cracking in the Arbaminch-Wolaita-Sodo Federal Road project in Ethiopia. It describes the project and outlines the DMAIC improvement cycle phases: Define, Measure, Analyze, Improve, Control. In the Define phase, tools like a project charter and value stream mapping were used. Road cracking is defined, with specific focus on factors that cause pothole cracking like rainfall, temperature, soil drainage, materials used, traffic load, and plants/trees. Models are presented to simulate the effects of these factors on flexible pavement cracking.
Road accidents are caused by a combination of factors related to road conditions, driver behavior, and vehicle characteristics. Poor road conditions such as roughness, rutting, cracking, and low skid resistance are contributing factors in a significant percentage of accidents. Maintaining adequate road quality through measures such as resurfacing and realignment can reduce accidents by 25-60%. Proper maintenance and repair of road defects can lower accident rates and safety costs. Monitoring road measurements like IRI and PSI that indicate roughness and conducting friction testing helps identify high-risk locations and control skid resistance.
Este documento discute las relaciones entre la causalidad y la prevención de accidentes a través del ejemplo del accidente de los Humboldt Broncos. Resume que las tres acciones tomadas después del accidente tuvieron conexiones limitadas con su causa declarada y que fueron insuficientes para prevenir futuros accidentes similares. Argumenta que los estudios de causalidad de accidentes tienden a encontrar erróneamente que el usuario de la vía es la única causa y que se necesita un enfoque más sistémico para la prevención.
Este documento presenta un algoritmo para predecir el rendimiento de seguridad de las carreteras rurales de dos carriles. El algoritmo consiste en modelos básicos que proporcionan estimaciones de seguridad para condiciones nominales, y factores de modificación que ajustan las predicciones según parámetros de diseño de segmentos y cruces. El algoritmo permite estimar el rendimiento actual o futuro y comparar alternativas de diseño, superando las limitaciones de usar solo datos históricos, modelos estadísticos, estudios antes-desp
1. The document discusses a study that uses finite element modeling to simulate subsurface drainage in roadways.
2. The study models unsaturated water flow through pavement layers using Richards equation and examines how layer properties like hydraulic conductivity affect drainage system performance.
3. The modeling reveals that subsurface drainage system performance depends not only on edge drain design but also on subgrade layer properties, with drainage decreasing as subgrade hydraulic conductivity increases.
INVESTIGATING SURFACE DRAINAGE PROBLEM OF ROADS IN KHARTOUM STATEIAEME Publication
This document investigates surface drainage problems of roads in Khartoum State, Sudan. It assesses the current condition of roads and drainage structures through field surveys. Poor drainage was found to contribute significantly to pavement deterioration. Causes included blocked drainage structures from waste, inadequate inlets and outlets, erosion, and lack of maintenance. These drainage issues led to severe road damage. The study recommends designing and constructing adequate drainage systems and applying proper maintenance to improve pavement performance and lifespan.
CAUSES OF HIGHWAY FAILURE IN NIGERIA ORIGINALAliyu Hamza
The document discusses the causes of highway failure in Nigeria. It identifies several key causes: moisture penetration into pavement layers from inadequate drainage systems, cracks in the pavement surface, and lack of consideration of subsurface geological conditions during the design process. Poor drainage is a major issue, as it can lead to a reduction in the strength of pavement layers over time from excessive water content. The document also examines the different layers that make up flexible and rigid pavements and their functions. It provides details on common defects seen in Nigerian roads like cracks, potholes, and edge deterioration.
This document discusses road failures and the importance of road maintenance. It notes that roads are the primary mode of transportation for passengers and goods in most areas. Inadequate road infrastructure can hinder socioeconomic development. Road maintenance is crucial to ensure a smooth surface for travel and prevent accidents. Over time, roads require maintenance due to various types of failures from minor cracks to major issues. Proper maintenance approaches are needed to minimize these failures and keep roads in good condition for safe transportation.
Screening Hydroplaning Risk Area By Hsd DataDr Wei Liu
According to road safety reports from various RCAs, about 30%-40% of road crashes occurred in wet conditions and among these wet road crashes, at least 50% of the drivers experienced loss-of-control of the vehicle in a partial or full degree, an indication of hydroplaning, which often resulted in serious injury or even fatal accidents. Unfortunately, risk of hydroplaning is often only considered in the design stage of roads and highways by providing sufficient drainage and proper selection of surface materials. During the operation and maintenance of roads and highways, there is still no direct and practical method to quantify hydroplaning risk for existing roads and highways.
Although several vehicle, roadway, and environmental factors affect the probability of hydroplaning, a general rule of thumb for highways is that hydroplaning can be expected for speeds above 70kph where water ponds to a depth of 2.5mm or greater over a distance of 10m or greater. In other words, for any set of driver inputs, tyre conditions and surfacing material, hydroplaning is only a function of water depth and vehicle speed. In this paper, a methodology for identifying and screening of hydroplaning risk area through analyzing the pavement transverse and longitudinal profile measurement from HSD survey will be introduced. Examples will be given to demonstrate that it will be a useful tool for road controlling agencies to evaluate the risk of hydroplaning for their road networks and to plan and carry out necessary maintenance actions to provide a safer road network for the public.
The document discusses evaluating skid resistance on national roads in the Podlaskie province of Poland. Skid resistance is the ability of a road surface to resist the relative motion between the tire and pavement, which is important for safety. It is characterized by the coefficient of friction and is crucial when roads are wet, as it affects braking distances and vehicle stability when turning. Many dangerous areas on roads with high traffic, such as roundabouts and pedestrian crossings, are at risk of skidding. The thesis will study and evaluate the properties of skid resistance on selected national roads in the province from 2008 to 2013 using an SRT-3 device to measure the coefficient of friction in wet conditions during braking.
Module 5: Highway Drainage and Highway EconomicsDhananjayM6
The document discusses highway drainage, which involves removing surface and subsurface water from roadways. Excess water can damage pavement and cause failures. The drainage system includes surface drains to remove surface water runoff, and subsurface drains to intercept groundwater. Surface drainage components are the road crown or slope, cross drains, and roadside drains. Hydrologic analysis estimates maximum runoff quantity using factors like rainfall intensity and drainage area. Hydraulic analysis then designs drains to convey this water away. The document provides examples to demonstrate designing a surface drainage system.
Nigeria has a matured flexible pavement road network owned by the public sector called the Federal Road. The 72km road networks from Ilesha – Akure are providing excellent service to road users for interstate movement. Due to movement of vehicles on the road, bitumen pavements tend to crack at some point of their lives under the combined action of traffic and the environment. These cracks are defects in the pavement surfacing which weaken the pavement and allow water to penetrate and cause potholes on the pavement. The results of a study conducted to facilitate the development of road pavement performance models that are appropriate for Nigeria and other similar developing countries, which could predict the rate of deterioration over their lifespan, have been presented. Comprehensive investigations were carried out on the expressway from the Federal University of Technology (FUTA) North Gate to NNPC Mega Station in Akure, Ondo State – apparently one of the busiest section along the road. The data collected are on traffic characteristics, Structural Number (pavement thickness), potholes and other distress types. Using these data and with the help of stepwise regression analysis, models were developed to predict the road pavement deterioration within the area of study and that could be useful for evaluating the failure susceptibility of the road. The calibrated model has 98.8% and 98.7% as R2 and adjusted R2 respectively. The model also has 8.8% (as average) difference between the predicted and actual rate of deterioration. The model can therefore, be used for planning maintenance programs of flexible pavement roads.
Enhancing Rainwater Harvesting through Pervious Pavement System Based on the ...civejjour
Pervious pavements are widely used in stormwater management practices due to their porosity.
However, the longevity and infiltration capacity could be greatly reduced with time due to
clogging issues. DakeRechsand manufactures pervious bricks from desert sand based on
principle of surface-free energy treatment. The pavers are made from desert sand that can
withstand against temperatures as high as 100 degrees Celsius and also handling freeze-thaw
cycle testing. This product range contains silica as the base material, has good anti-slippery
performance when wet. And observations showed that the there is less chance of black ice
formation on the brick surface, due to air-permeable propertities of the material. The company
has completed hundreds of projects mainly in China. Utilizing breathable desert sand using the
surface free energy is something not mastered before and DakeRechsand introduces an ecofriendly, sediment-free, recyclable, and much efficient technology to enhance rainwater
harvesting and water conservation.
Enhancing Rainwater Harvesting through Pervious Pavement System Based on the ...civejjour
Pervious pavements are widely used in stormwater management practices due to their porosity.
However, the longevity and infiltration capacity could be greatly reduced with time due to
clogging issues. DakeRechsand manufactures pervious bricks from desert sand based on
principle of surface-free energy treatment. The pavers are made from desert sand that can
withstand against temperatures as high as 100 degrees Celsius and also handling freeze-thaw
cycle testing. This product range contains silica as the base material, has good anti-slippery
performance when wet. And observations showed that the there is less chance of black ice
formation on the brick surface, due to air-permeable propertities of the material. The company
has completed hundreds of projects mainly in China. Utilizing breathable desert sand using the
surface free energy is something not mastered before and DakeRechsand introduces an ecofriendly, sediment-free, recyclable, and much efficient technology to enhance rainwater
harvesting and water conservation.
Los investigadores han demostrado empíricamente que la fricción deslizante en la arena se reduce en gran medida añadiendo algo de agua ―pero no demasiada―.
Drainovia - Effective in all weather conditionsEurovia_Group
Porous asphalts are road surfacings that absorb and drain off rainwater, thereby limiting its harmful effects at the road surface. Motorists easily recognise this type of surfacing.
This document provides information on flexible pavement design and theory. It discusses the typical layers of a flexible pavement including the surface course, base course, and subgrade. It also outlines several factors that affect pavement design such as wheel load, climate, and material characteristics. Additionally, the document examines failures like fatigue cracking and rutting that pavement design aims to prevent. It provides guidance on mechanistic-empirical design as prescribed by the Indian Roads Congress.
The document discusses permeability and describes permeability as a property that measures how easily fluids can move through pore spaces in a material. It then discusses several methods to test permeability, including laboratory methods like the constant head and falling head permeability tests, and field methods like pumping tests. Finally, it outlines some common uses of permeability testing, such as determining suitability of soil for construction or wastewater treatment systems.
- Heavy rainfall during the Indian monsoon season causes severe damage to roads, including cracking and pothole formation. This disrupts road transport and increases accidents.
- Factors like poor drainage, low quality materials, and expansive subsoil exacerbate the effects of rain on roads. Rain weakens the bonding between bitumen and aggregates in asphalt roads.
- The study aims to analyze the impacts of rain on road transport and identify solutions to mitigate these impacts and reduce accidents. The researchers will inspect damaged roads and conduct surveys.
This document discusses subgrade design for flexible pavements. It describes how the subgrade strength, assessed using the California Bearing Ratio (CBR), depends on the soil type, density, and moisture content. It outlines three categories for estimating the design moisture content based on water table depth and climate. Design CBR is determined through laboratory testing of soil samples compacted to different densities and moisture contents. The design CBR must be assigned to one of six strength classes used in pavement thickness design. Estimates can also be made using a table correlating water table depth and soil type to strength class.
The document summarizes a study on evaluating longitudinal skid resistance on pavement surfaces in Bangalore City. Portable pendulum skid resistance testing was conducted on four road stretches under different conditions like dry, wet, with dry sand, and with oil. Texture depth was also measured using the sand patch method. International Friction Index (IFI) values were calculated from the wet skid resistance and texture depth measurements to allow comparison between different testing equipment. The study found skid resistance values decreased in wet, sandy, and oily conditions compared to dry conditions. Correlation charts showed higher skid resistance with increasing texture depth. The IFI standard practice for harmonizing friction measurements taken with different equipment was also summarized.
This document provides an overview of the Sigma Six model used to analyze cracking in the Arbaminch-Wolaita-Sodo Federal Road project in Ethiopia. It describes the project and outlines the DMAIC improvement cycle phases: Define, Measure, Analyze, Improve, Control. In the Define phase, tools like a project charter and value stream mapping were used. Road cracking is defined, with specific focus on factors that cause pothole cracking like rainfall, temperature, soil drainage, materials used, traffic load, and plants/trees. Models are presented to simulate the effects of these factors on flexible pavement cracking.
Road accidents are caused by a combination of factors related to road conditions, driver behavior, and vehicle characteristics. Poor road conditions such as roughness, rutting, cracking, and low skid resistance are contributing factors in a significant percentage of accidents. Maintaining adequate road quality through measures such as resurfacing and realignment can reduce accidents by 25-60%. Proper maintenance and repair of road defects can lower accident rates and safety costs. Monitoring road measurements like IRI and PSI that indicate roughness and conducting friction testing helps identify high-risk locations and control skid resistance.
Este documento discute las relaciones entre la causalidad y la prevención de accidentes a través del ejemplo del accidente de los Humboldt Broncos. Resume que las tres acciones tomadas después del accidente tuvieron conexiones limitadas con su causa declarada y que fueron insuficientes para prevenir futuros accidentes similares. Argumenta que los estudios de causalidad de accidentes tienden a encontrar erróneamente que el usuario de la vía es la única causa y que se necesita un enfoque más sistémico para la prevención.
Este documento presenta un algoritmo para predecir el rendimiento de seguridad de las carreteras rurales de dos carriles. El algoritmo consiste en modelos básicos que proporcionan estimaciones de seguridad para condiciones nominales, y factores de modificación que ajustan las predicciones según parámetros de diseño de segmentos y cruces. El algoritmo permite estimar el rendimiento actual o futuro y comparar alternativas de diseño, superando las limitaciones de usar solo datos históricos, modelos estadísticos, estudios antes-desp
Este documento presenta un algoritmo para predecir el rendimiento de seguridad de las carreteras rurales de dos carriles. El algoritmo consiste en modelos básicos que proporcionan estimaciones de seguridad para condiciones nominales, y factores de modificación que ajustan las predicciones para tener en cuenta características como el ancho de carril y pendiente. El algoritmo permite estimar el rendimiento de seguridad actual o futuro y comparar alternativas de diseño. Incluye procedimientos de calibración y empírico-bayesianos
This document discusses lane width and its relationship to road safety based on a review of previous research studies. It makes the following key points:
1. Early research that looked at accident rates versus lane width alone was flawed because it did not account for other factors correlated with lane width like traffic volume.
2. More recent studies that controlled for traffic volume have found mixed or inconclusive results on the safety effects of lane width. Wider lanes do not consistently show reductions in accident rates.
3. The relationship between safety and lane width is complex due to driver behavior adaptations - wider lanes may induce higher speeds but also provide more room for error. The empirical evidence does not clearly show whether wider lanes improve or harm safety
Este documento discute la necesidad de mejorar la administración de la seguridad vial basada en el conocimiento. Identifica barreras institucionales como la falta de coordinación entre agencias y la renuencia a compartir información. También señala que a pesar de décadas de investigación, gran parte del conocimiento existente sobre seguridad vial no se utiliza en la toma de decisiones. Propone esfuerzos como herramientas de diseño de carreteras basadas en conocimientos y un manual de seguridad vial para mejorar el uso de la evidencia en
Este documento presenta un algoritmo para predecir el rendimiento de seguridad de las carreteras rurales de dos carriles. El algoritmo consiste en modelos básicos que proporcionan estimaciones de seguridad para condiciones nominales, y factores de modificación que ajustan las predicciones para tener en cuenta características como el ancho de carril y pendiente. El algoritmo permite estimar el rendimiento de seguridad actual o futuro y comparar alternativas de diseño.
Este documento discute la relación entre el ancho del carril y la seguridad vial. Señala que la investigación inicial que vinculaba carriles más anchos con menor siniestralidad adolecía de factores de confusión, ya que carriles más estrechos suelen asociarse con vías de menor tránsito que también tienen otras características que afectan la seguridad. La tasa de accidentes tiende a disminuir a medida que aumenta el tránsito debido a múltiples factores, no solo al ancho del carril. Por lo tanto
1. Los caminos diseñados según las normas actuales no son necesariamente seguros, inseguros o apropiadamente seguros. Cumplir con las normas de diseño no garantiza un nivel predecible de seguridad, ya que las normas a menudo establecen límites mínimos y no consideran cómo las decisiones de diseño afectan realmente la seguridad.
2. El autor argumenta que ni los caminos cumplen con las normas son "tan seguros como pueden ser" ni son "tan seguros como deberían ser", ya que
Este documento discute los desafíos de inferir relaciones causa-efecto a partir de estudios observacionales de seguridad vial. Examina el uso de estudios transversales para estimar el "efecto de seguridad" de diferentes medidas, como el reemplazo de señales en cruces ferroviarios. Sin embargo, los estudios transversales no pueden establecer claramente la causalidad debido a factores de confusión no observados. Además, los resultados de estudios transversales a menudo difieren de estudios antes-después, planteando d
Este documento discute el mito de que los conductores ancianos tienen una mayor tasa de accidentes debido a una disminución en su capacidad de conducir de forma segura relacionada con la edad. En realidad, cuando se controlan factores como la cantidad de kilómetros conducidos y el tipo de carretera, no existe una sobrerrepresentación significativa de accidentes entre conductores ancianos, excepto para aquellos que conducen menos de 3,000 km por año. Además, la mayoría de las muertes que involucran a conductores ancianos son del
Este documento describe la transición necesaria en la cultura de seguridad vial, de un enfoque basado en la opinión y la intuición a uno basado en la evidencia y la ciencia. Actualmente hay pocos profesionales capacitados en este conocimiento basado en hechos. También argumenta que muchos actores influyen en la seguridad vial además de la policía, como planificadores, diseñadores e ingenieros, y que se necesita un cambio cultural para gastar el dinero de manera efectiva en reducir accidentes.
Este documento discute el impacto de la ingeniería en la seguridad vial. Explica que las decisiones de ingeniería que dan forma a las redes viales y vehículos afectan el número de oportunidades para que ocurran accidentes, la probabilidad de accidente por oportunidad, la cantidad de energía disipada en un choque y el daño causado. También analiza cómo la ingeniería tiende a dividir problemas complejos en elementos más simples para su cuantificación y análisis, lo que puede ignorar factores humanos en seguridad vial
Este documento discute la transición en el enfoque de la administración de la seguridad vial, de un estilo pragmático basado en la intuición a un estilo más racional basado en evidencia empírica. Argumenta que las decisiones de muchos profesionales afectan la seguridad vial futura y que estos profesionales carecen de capacitación en seguridad vial. Finalmente, sostiene que para administrar la seguridad vial de manera racional se necesita invertir en investigación y formación de recursos humanos.
Este documento proporciona un resumen de tres puntos clave:
1) Describe el mandato del comité de revisión de seguridad de la carretera 407, que incluye evaluar si el diseño cumple con las normas de seguridad de Ontario y si las normas se aplicaron de manera segura.
2) Explica brevemente la estructura del comité de revisión y los recursos utilizados como visitas al sitio y materiales de referencia.
3) Presenta una visión general de los principios clave de la seguridad v
1. El documento discute dos mitos comunes sobre la seguridad vial: que los caminos construidos según las normas son seguros, y que los accidentes solo son causados por conductores humanos.
2. Un comité de revisión de seguridad tuvo que enfrentar estos mitos al evaluar la seguridad de una nueva autopista en Toronto.
3. El comité concluyó que cumplir con las normas de diseño no garantiza la seguridad, y que tanto los caminos como los conductores influyen en los accidentes.
Este documento discute el estilo pragmático vs racional de la administración de la seguridad vial. Argumenta que la investigación de seguridad vial es útil solo si la administración usa el conocimiento existente para tomar decisiones racionales, en lugar de parecer estar haciendo lo que el público cree que debería hacerse. También señala que la ausencia de datos no es el principal impedimento para la administración racional, sino la falta de profesionales capacitados y posiciones dedicadas a usar el conocimiento disponible para guiar las decisiones
Este documento discute el conocimiento y la administración de la seguridad vial. Argumenta que la investigación de la seguridad vial debe estar al servicio de la administración práctica de la seguridad vial. Sin embargo, el conocimiento basado en la investigación solo es útil si el estilo de administración de la seguridad vial cambia a uno más racional y pragmático. Finalmente, señala que los obstáculos actuales para la administración racional de la seguridad vial, como la falta de datos y conocimiento accesible, pueden y
Este documento discute el estilo pragmático vs racional de la administración de la seguridad vial. Argumenta que la investigación de seguridad vial es útil solo si la administración usa el conocimiento existente para tomar decisiones racionales, en lugar de parecer estar haciendo lo que el público cree que debería hacerse. También señala que la ausencia de datos no es el principal obstáculo, sino la falta de profesionales entrenados y posiciones para integrar el conocimiento de seguridad en la toma de decisiones.
Este documento resume dos informes sobre seguridad vial. El primer informe analiza los efectos del número de carriles y las banquinas pavimentadas en la frecuencia de accidentes. Concluye que los caminos de dos carriles con banquinas pavimentadas tienen menos accidentes que sin ellas, mientras que los de cuatro carriles sin banquinas pueden tener más o menos accidentes dependiendo del volumen de tráfico. El segundo informe examina los índices utilizados para medir la seguridad de diferentes tipos de vehículos y conductores. Concluye que los í
Las tres oraciones son:
1) Muchos estudios han encontrado que a medida que aumenta la densidad de accesos a propiedades, también aumenta la frecuencia de accidentes. 2) La pendiente de una carretera afecta la seguridad de varias maneras, incluyendo cambios en la velocidad de los vehículos y la distancia de frenado. 3) El efecto de la pendiente en la seguridad solo puede comprenderse en el contexto del perfil completo de la carretera y su influencia en el perfil de distribución de velocidades.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
ACEP Magazine edition 4th launched on 05.06.2024Rahul
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...IJECEIAES
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELgerogepatton
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMSIJNSA Journal
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
1401 016
1. TRANSPORTATION RESEARCH RECORD 1401 117
Hydroplaning and Roadway
Tort Liability
JOHN M. MüUNCE AND RICHARD T. BARTOSKEWITZ
Tort ciaims against highway agencies for alleged incidents of hy-
droplaning dueto roadway defects have been growing in number.
Many ciaims of hydroplaning cannot be substantiated by the
weather, roadway, or vehicie conditions present at the time of
the accident. And often when hydroplaning occurs, the evidence
indicates that an inappropriate response to adverse driving con-
ditions, or simply driver negligence, may be the direct cause rather
than a roadway defect. Research of the phenomenon of hydro-
planing was reviewed to address issues that arise when hydro-
planing is alleged in roadway tort litigation. Hydroplaning is the
separation of a rolling or sliding tire from the roadway surface
by a !ayer of fluid. Of the three types of hydroplaning commonly
recognized, highway engineers are primarily concerned with vis-
cous and dynamic hydroplaning. Of these two, dynamic hydro-
planing presents the greater risk. In the extreme situation of full
dynamic hydroplaning, complete separation of the tire from the
pavement by a fluid !ayer negates the driver's ability to control
vehicie speed and direction. Hydroplaning may be avoided by
consideration of severa! factors. Proper highway design may re-
duce hydroplaning risks by providing adequate pavement texture
and cross slope. However, ultimate responsibility for avoiding
hydroplaning lies with the driver. Drivers can reduce incidents
of hydroplaning by maintaining tires in good condition at rated
inflation pressures and by slowing down during rainstorms or on
wet roadways.
Rainfall and water present on the pavement surface influ-
ence the safety of motor vehicle operation. The latest national
accident statistics, compiled through 1990, indicate that ap-
proximately 10 percent of ali fatal crashes occur on wet pave-
ments during rainfall (1). In Texas, approximately 28 percent
of ali accidents are categorized as occurring during rainfall or
on wet pavements (2).
Motorists must be relied upon to recognize the degradation
of their ability to operate safely brought on by diminished
visibility through rainfall and reduced frictíon capabilities on
wet pavement. Many accidents in wet weather are dueto loss
of vehicle control, which results from either failure to rec-
ognize or to properly respond to adverse weather and pave-
ment conditions.
In recent years, an increasing number of tort lawsuits have
been filed against street and highway operating agencies with
allegations of roadway defects responsible for "hydroplan-
ing." In the adjudication of these lawsuits, many statements
have been made as to when, where, and how hydroplaning
occurs.. Most wet weather accidents are not caused by hydro-
planing. In reality, hydroplaning is a rare event, and its oc-
currence is dependent on many factors. This paper is a com-
Texas Transportation Institute, The Texas A&M University System,
College Station, Tex. 77843-3135. ·
pilation of research directed to the phenomenon of hydroplaning
as related to roadway tort litigation.
PHYSICS OF HYDROPLANING
A basic understanding of the function of pavement texture in
the tire-pavement interface is critica) to a discussion of the
mechanics of hydroplaning. Roadway surfaces are character-
ized by pavement microtexture and macrotexture. Microtex-
ture describes the degree of polishing of the pavement surface
or aggregate, varying from harsh to polished (3, Chapter 2),
and is necessary to the development of frictional forces be-
tween the tire and pavement on wet surfaces. The magnitude
of these frictional forces becomes greater with increased mi-
crotexture, and it is maximized at lower vehicle speeds (4).
When a thin !ayer of water is present, asperities on the pave-
ment surface break through the waterfilm to enable direct
contact between the tire and pavement (5). These asperities
are thousands of small, pointed projections that make up
microtexture. High local bearing pressures are generated by
contact between the tire tread and the pavement asperities,
thereby allowing the tire to establish essentially "dry" contact
with the roadway (6).
Macrotexture describes the size and extent of large-scale
protrusions from the surface of the pavement, varying from
smooth to rough. Macrotexture is a function of aggregate
gradation, the pavement construction method, and special
surface treatments such as grooving or chipping (3, Chapter
2). Whereas microtexture governs wet friction at low vehicle
speeds, macrotexture is the critica) factor for higher vehicle
speeds. Priction levels are significantly lower for pavements
with poor macrotexture than for pavements with good ma-
crotexture when vehicle speeds are high and flooded condi-
tions prevail. This is explained by the fact that macrotexture
provides channels for drainage, thereby reducing hydrody-
namic pressures existing between the tire and pavement when
water is present (4). Por a thin waterfilm and high vehicle
speeds, macrotexture is vital to establishing and maintaining
contact between the tire and pavement. Por a flooded pave- '
ment, it operates as escape channels for bulk water drainage
from beneath the tire footpi-int (6).
The physical phenomenon of hydroplaning is the separation
of a rolling or sliding tire from the roadway surface by a !ayer
of fluid. On a wet or flooded pavement, hydrodynamic pres-
sures increase as vehicle speed increases and eventually reach
a critica! point at which the tire is lifted away from the surface
(7}. Three types of hydroplaning have been identified: (a)
viscous hydroplaning, (b) dynamic hydroplaning, and (e) tread
2. 118
rubber reversion hydroplaning. Viscous and dynamic hydro-
planing are of concern when examining highway operations
on wet pavements.
Viscous hydroplaning is a problem associated with low-
speed operation on pavements with little orno microtexture.
lt results from an extremely thin film of water existing co-
hesively between the tire and the pavement surface because
of insufficient microtexture to penetrate and diffuse the fluid
!ayer. For this reason, viscous hydroplaning is commonly re-
ferred to as thin film hydroplaning to distinguish it from dy-
namic hydroplaning, which requires a comparatively thick
fluid !ayer.
Opinioñs on the importance of vehicle speed to viscous
hydroplaning vary. Yeager states that viscous hydroplaning
is observed at vehicle speeds greater than 32 km/hr (20 mph)
(8). However, Browne contends that viscous hydroplaning
can occur at any vehicle speed and with any waterfilm thick-
ness (9). The important point is that it may occur when vehicle
speeds are very low, such as with speeds typical of city driving.
The most critica! factors of influence during viscous hydro-
planing are the viscosity of the fluid, tire condition, and the
quality of the pavement surface. lt will not occur unless the
tire tread depth is very shallow and the pavement has a "pol-
ished" quality. Viscous hydroplaning may be described as a
rare event characterized by a bald tire operating on a mirror-
smooth surface.
Dynamic hydroplaning results from uplift forces created by
a water wedge driven between a moving tire and the pavement
surface, as shown in Figure 1. The risk of dynamic hydro-
planing is high when fluid inertial effects dominate, as with
thick waterfilms found on a flooded pavement. Dynamic hy-
droplaning can only occur when the water accumulation en-
countered by the tire exceeds the combined drainage capacity
of the tire tread and the pavement macrotexture for a given
speed (9). For extreme conditions, it has been observed for
water depths as little as 0.76 mm (0.03 in.) with bald tires on
smooth, polished pavement surfaces (8).
A hydroplaning tire may experience either partía! or full
dynamic hydroplaning. With partía! dynamic hydropláning,
only part of the tire actually rides on the surface of the water.
Contact between at least a portion of the tire footprint and
the pavement surface is maintained. Full dynamic hydroplan-
ing, on the other hand, is characterized by complete sepa-
Vehicle Weighl
Uplifl Forces
FIGURE 1 Dynamic hydroplaning.
TRANSPORTA TJON RESEARCH RECORD 1401
ration of the tire from the pavement by the fluid )ayer. The
occurrence of full dynamic hydroplaning represents a far greater
hazard than partía! dynamic hydroplaning; the driver is unable
to control vehicle steering and braking because of the loss of
contact.
Speed and waterfilm thickness are the governing conditions
for partía! and full dynamic hydroplaning. It is difficult to
identify with precision the speed at which these phenomena
occur, because other variables that describe the roadway sur-
face, the tire condition, and the driving environment must be
considered. Whereas ordinary highway operating speeds and
water depths may give rise to partial dynamic hydroplaning,
considerably higher vehicle speeds anda very thick waterfilm,
such as that produced by high-intensity rainfall, are necessary
for full dynamic hydroplaning to occur (10). For most situa-
tions, the vehicle speed at which full dynamic hydroplaning
is observed would be considered unsafe or not prudent for
the amount of water on the roadway, assuming that the tire
tread is sufficient and that the tires are properly inflated.
FACTORS INFLUENCING ROADWAY
HYDROPLANING
Dynamic hydroplaning is a function of the complex interaction
between many variables. For this reason, the probability of
full dynamic hydroplaning is rather low (10). Factors critica!
to hydroplaning are shown in Figure 2. As can be seen, the
four primary effective variables are rainfall, the roadway, tire
characteristics, and the driver.
In general, hydroplaning is a low-probability event because
rainfall intensities necessary to flood a pavement surface are
rare and of short duration (11). Furthermore, rainfall intensi-
ties of sufficient magnitude [5.1 to 10.2 cm/hr (2 to 4 in./hr)]
to create sheet flooding of pavement surfaces reduce visibility
even with wipers so that prudent drivers will reduce operating
speeds for safety (10).
Drainage path length refers to the distance any discrete
water molecule would have to negotiate to drain from a given
point on the pavement surface. It is a function of the number
of lanes of travel and the Jane width. A typical two-lane,
TIRE
* Pressure
* Footprint
Ratio
ROAD
* Texture
* Cross
Slope
DRIVER
* Recognition
* Actions
Probability of Hydroplaning
RAINFALL
* Inlensity
* Drainage
Palh
FIGURE 2 Synthesis of interactive factors
influencing hydroplaning.
3. Mounce and Bartoskewitz
crowned cross section has a nominal drainage path length of
3.66 ft. This factor is especially significant for water accu-
mulations that result from extended drainage path lengths
associated with multilane roadways. An investigation of po-
tential meaos of decreasing the occurrence of hydroplaning
concluded that minimizing the drainage path length through
careful highway design and construction is an effective strat-
egy (11). When multiple travel lanes are present, the negative
impact of longer drainage path lengths can be mitigated through
appropriate application of pavement cross slope and pave-
ment texture.
Roadway factors of pavement texture and transverse cross
slope are critica! to controlling water accumulation and drain-
age. A transverse cross slope of 2.5 percent is desirable to
facilitate adequate surface drainage for common rainfall in-
tensities without impeding vehicle steering or lane-changing
maneuvers (10).
The role of pavement texture in collecting and draining sur-
face water from the vehicle path has already been addressed.
Balmer and Gallaway (1J) reported the results of an extensive
investigation of applications of pavement texture to reduce
the risk of hydroplaning and to improve wet traction. The use
of a gritty, coarse surface texture or finish in the construction
and maintenance of pavements was recommended.
Providing texture depth is also critica! because deeper tex-
tures act as larger escape channels for water forced from
beneath the tire footprint region. Balmer and Gallaway dis-
covered that increasing the texture depth from 0.76 mm (0.03
in.) to 3.81 mm (0.15 in.) raised the speed at which dynamic
hydroplaning was predicted to occur by 16.1 km/hr (10 mph)
for tire inflation pressure of 206.85 kPa (30 psi), tire tread
depth of 6.75 mm (8.5/32 in.), and water depth of 7.6 mm
(0.3 in.). lt was also concluded that transverse texture, aligned
parallel to the cross slope direction, can be expected to pro-
vide improved overall surface drainage, improved water ex-
pulsion between the tire and the pavement, and a decrease
in the forward motion ofwater responsible for creating a water
wedge between the tire and pavement.
Pavement texture depth of 1.52 mm (0.06 in.) or greater
is the recommeñded mínimum for roadwáys with high oper-
ating speeds. This will provide adequate drainage and de-
crease hydroplaning for normally expected rainfall rates (10).
For roadways with low-speed operation, even less texture
depth may be tolerable. However, even under the best design
and construction conditions, storms of unusually high inten-
sity, though rare, are likely to create flooding of the pavement
surface above the texture asperations.
The tire is one of the most critica! factors influencing
hydroplaning. Even on a well-designed, properly maintained
roadway, a worn, under-, or overinflated tire experiences
considerably higher risk of hydroplaning than does a tire
in "good" shape, for normally expected rainfall and pru-
dent speed. Yeager (8) and Browne (9) have addressed
factors of tire constructton and condition that influence
hydroplaning.
Tread pattern is one of these factors. Lateral and longi-
tudinal grooves, sipes, and ribs make up the tire tread pattern.
Grooves are the deep channels that run around the circum-
ference of the tire (longitudinal grooves) and across the tire
surface (lateral grooves). Tliey serve two principal functions.
By channeling bulk water through and out of the tire footprint
119
region, grooves help to prevent the formation of the water
wedge that penetrates into the footprint region and causes
dynamic hydroplaning. They also function as reservoirs for thin
waterfilms squeezed from between the tire and the pavement
surface, which reduces the risk of viscous hydroplaning (9).
Four parameters describe the effectiveness of the tread
grooves with respect to wet traction and hydroplaning: tread
depth, groove capacity, groove shape, and groove spacing.
Tread depth is primarily a measure of how much tread re-
mains on a tire after experiencing wear as a result of extended
use. When the tire is worn to an extent such that the depth
of tread reaches a mínimum safe value, tire replacement is
recommended.
The amount of surface water to be effectively handled is
referred to as the tire's groove capacity. It is related to tread
depth and influenced by tire construction, load, and inflation
pressure. Once the amount of pavement surface water en-
countered by the tire tread exceeds the groove capacity, the
excess water must have sufficient time to be displaced without
building up in front of the tire and creating uplift pressure on
the tire. Higher vehicle speeds reduce the time of displace-
ment and increase the risk of hydroplaning.
Another determining factor of groove capacity is groove
closure. The effect of groove closure is a considerable reduc-
tion in the tread's groove capacity. This phenomenon depends
on the structural properties of the tire tread, the rotational
speed of the tire, and the inertial forces of the fluid layer that
the tire encounters. It is a direct consequence of lateral forces
acting in the tire ribs toward the longitudinal centerline of
the tire footprint. Groove closure is resisted by frictional forces
between the tire and the pavement. However, in the absence
of these frictional forces, such as on a wet pavement, no force
exists to counteract groove closure. Groove closure has been
found to be less of a problem for radial tires than for bias
tires (8).
Groove shape and spacing influence a tire's wet traction
capabilities and performance. Groove shape is especially im-
portant for a sliding tire, as opposed to a free rolling tire (8).
Wide grooves provide optimum flow characteristics and mit-
igate the effects of groove closure. Slight amounts of zigzag
with qiagonal grooves are also desirable. For a free rolling
tire, groove capacity is the controlling factor, although di-
agonal grooves and blading help to reduce the risk of viscous
hydroplaning on a smooth surface. Grooves should be closely
spaced to achieve peak traction performance.
Other tire factors relating to hydroplaning imd wet traction
may be generally categorized as elements of the tire carcass.
These include tire dimensions and flexibility. The region of
contact between the tire and pavement, the tire footprint, is
measured by length and tire width. As tire width increases,
the width of the footprint increases. On a wet or flooded
pavement, this is important because the tire will encounter
and interact with a greater amount of fluid than it would have
otherwise. Accordingly, the task of collecting and channeling
water away from the tire footprint becomes more difficult and
requires a greater length of time, and the magnitude of hy-
drodynamic forces acting on the tire is greater. But whereas
increasing the width of the contact region is potentially det-
rimental, increasing its length results in greater amounts of
dry contact within this region. It follows that wet traction
performance and safety are enhanced.
4. 120
The effects of tire footprint dimensions on dynamic hydro-
planing speed have recently been investigated (12-14). The
tire footprint aspect ratio is calculated as the tread contact
area width divided by the length of the footprint (Figure 3).
It is of particular interest in analyzing the hydroplaning ten-
dency of tractor-trailer trucks. Aspect ratios for trucks are
influenced by the magnitude of the load. The footprint aspect
ratio for an empty truck is considerably higher than for a
loaded truck, when holding inflation pressure constant, due
to shorter tire footprints for empty trucks. As explained pre-
viously, this results in less dry contact area between the tire
and the pavement. Furthermore, accident statistics show that
jackknifing of empty tractor-trailer trucks on wet pavements
is a significant event that may be attributed to dynamic hy-
droplaning. lt was determined that the footprint aspect ratio
is a variable that must be considered when estimating dynamic
hydroplaning speeds for pneumatic tires.
Tire construction and inflation pressure govern tire flexi-
bility. Bias ply, belted bias ply, and radial ply are the three
common methods of tire construction. With respect to de-
creasing the potential of the tire to hydroplane, belted bias
ply and radial tires are preferred. The treads of these tires
have improved stability, provided by belts under the tread
region. This serves to reduce tire tread wear and groove clo-
sure and makes possible the inclusion of exaggerated tread
pattems that reduce hydroplaning risks (9).
The function of tire inflation pressure in raising or lowering
a tire's hydroplaning tendency is difficult to analyze and eval-
uate. lt has been shown that for dynamic hydroplaning to take
place, the tire surface must deform inward, toward the center
of the tire. When this deformation is present, water can pen-
etrate deeper into the tire footprint to create the water wedge
that can eventually lead to full dynamic hydroplaning. Higher
inflation pressure improves the tire's rigidity and its ability to
resist the hydrodynamic forces causing tire surface defor-
mation, thereby raising the speed required for hydroplaning
L
TRANSPORTATJON RESEARCH RECORD 1401
to occur. lt also counteracts the lateral forces in the tire ribs
that encourage groove closure. The drawback, however, is
shortening of the tire footprint and the ensuing reduction of
the dry contact area between the tire and pavement. This
essentially lowers the hydroplaning speed (9).
Roadway, vehicle, and environmental factors that interact
to create hydroplaning have been mentioned. The driver's
recognition of and response to these various factors are crit-
ica!. Drivers avert hydroplaning by direct action, for instance
by maintaining safe speeds on wet roadways. They can also
indirectly reduce the potential for hydroplaning through a
careful program of tire maintenance.
PREDICTING AND IDENTIFYING
HYDROPLANING SPEEDS
Substantial effort has been devoted to the development of
formulas and criteria to identify the precise speed at which
hydroplaning occurs. The most common approach has been
to calculate the critica! speed required for dynamic hydro-
planing. Sorne of these equations are simple relationships
defining the hydroplaning speed as a function of one or two
variables. Others are considerably more complex. As might
be expected, the task of predicting when hydroplaning will
occur, or of identifying a particular wet-weather accident as
a hydroplaning incident, is rather difficult and involves a sub-
stantial degree of uncertainty. The purpose of this section is
to briefly describe sorne of the analytical and empirical tech-
niques for evaluating hydroplaning potential.
In the case of viscous hydroplaning, Equation 1 describes
the minimum hydroplaning speed for a pavement surface with
slight microtexture:
L
V >--
H- l::,,.T
sf
Water
tttttt Tread Pattern
Tread Grooves
Direction of Travel
(1)
ASPECT RATIO
W + L
w
FIGURE 3 Tire footprint-pavement view.
5. Mounce and Bartoskewitz
where
VH = minimum viscous hydroplaning speed,
L = length of the tire footprint region, and
liT,1 = time required for sufficient reduction of the fluid
film for contact between the tread rubber and the
pavement asperities to occur (9).
This formula is not applicable to dynamic hydroplaning.
Yang has proposed an analytical equation to define hydro-
planing as par't of an effort to develop design criteria for
runway pavement grooving (15). The underlying principie for
this equation is that hydroplaning will occur when the water
escape velocity due to an externa! force, the tire pressure, is
less than the speed at which the surface water travels sideways.
The critica! moment at which hydroplaning occurs is defined
by Equation 2:
( 7J'llV)
cp112 = 0.1292 b
where
e = constant,
p = tire inflation pressure (kPa),
a = width of the tire footprint (cm),
b = length of tire footprint (cm), and
v = vehicle velocity (cm/sec).
For U.S. customary units, Equation 2 is rewritten as
i12 - 7J'a/4
cp - 2blv
where
e = constant,
p = tire inflation pressure (lbf/in.2),
a = width of the tire footprint region (in.),
b = length of the tire footprint region (in.), and
v = vehicle velocity (in./sec).
(2)
(3)
The development of this equation assumes an elliptical tire
footprint shape.
One of the most frequently cited hydroplaning equations
was developed by Home to predict the minimum dynamic
hydroplaning speed for pneumatic tires (16). In its simplified
form, this equation is
VH = 6.35Vp (4)
which yields the minimum tire hydroplaning speed VH (km!
hr) as a function of the tire inflation pressure p (kPa). In U.S.
customary units, Equation 4 is given by
(5)
where the mínimum tire hydroplaning speed VPis in mph and
the tire inflation pressure pis in lbf/in.2 The formula is derived
from empirical data and based on inertial properties of the
fluid !ayer. It is applicable to flooded pavements, when the
water depth exceeds the tire tread depth.
121
Recent research has indicated that the mínimum dynamic
hydroplaning speed of automobile, truck, and bus tires varies
not only with the inflation pressure but also with the tire
footprint aspect ratio (12-14). Consequently, Home pro-
posed a modification of bis earlier formula to account for the
influence of the footprint aspect ratio under load. Simplified,
this new equation may be written as Equation 6:
(6)
where wll is the tire footprint aspect ratio, the tire inflation
pressure pis in kPa, and the minimum tire hydroplaning speed
VH is in km/hr. For U.S. customary units, Equation 6 may
be written as
(7)
which yields the speed VP in mph as a function of the tire in-
flation pressure p in lbf/in.2 lt is seen that the magnitude of the
mínimum dynamic hydroplaning speed increases as the tire
inflation pressure increases and the tire footprint aspect ratio
decreases (12). Research at the Texas Transportation Institute
(TTI) investigated the validity of Horne's predictions of dy-
namic hydroplaning of lightly loaded truck tires at typical
highway speeds (13). TTI engineers formulated the relationship
( )
0.5
V= 24.99(p)021 ~~ (8)
normalized for the test aspect ratio of 1.4. In U.S. customary
units, Equation 8 is written as
V= 23.3(p)º 21 (~irs (9)
Although Equations 8 and 9 differ from Equations 6 and 7,
they yield curves that agree closely over the range of test
conditions.
A study by Gallaway et al. (17) developed an empirical
formula for dynamic hydroplaning speed when the waterfilm
thickness exceeds 0.10 in. Multiple linear regression yielded
the following expression:
V = 0.902SD004P03 TD +
( l)o.o6A
0.794
(10)
where A is the greater of
( 11.008 )
A = WDºº6 + 3.507 (11)
or
A = ( 26·871 - 6 861) TXDº 14
WD0 ·06 •
(12)
and V is the vehicle speed (km/hr), SD is the spindown per-
centage, Pis the tire inflation pressure (kPa), TD is the tread
depth (mm), WD is the water depth above the pavement
asperities (cm), and TXD is the pavement texture depth (cm).
6. 122
To indicate the point at which hydroplaning occurs, the spin-
down parameter was used. Spindown describes the change in
a free rolling tire's rotational velocity upon loss of contact
with the pavement surface, as in full dynamic hydroplaning.
When U.S. customary units are used, Equation 13 is applied:
V = SD004 P03 (TD + l)006A (13)
where A is the greater of
( 10.409 )
A = WDº·º6 + 3.507 (14)
or
A = [ 28·952 - 7 817]TXDº·14
WD0 ·06 •
(15)
and V is expressed in mph, Pis in lbf/in.2 , TD is given as
32nds of an inch, and WD and TXD are expressed in inches.
Two studies conducted at The Pennsylvania State Univer-
sity have investigated hydroplaning speeds. Agrawal et al.
(18) ranked highway pavement performance by evaluating the
hydroplaning potential of various pavement treatments. The
dynamic hydroplaning speed was determined indirectly by
measuring the brake force coefficient, the friction value that
describes the tire-pavement interface. lt was assumed that ful!
dynamic hydroplaning occurs when the brake force coefficient
is zero.
Huebner et al. (19) developed a hydroplaning model that
draws on the work of both Gallaway and Agrawal. For wa-
terfilm thicknesses greater than 0.25 mm (0.10 in.), Galla-
way's equation for the critica! dynamic hydroplaning speed
was adopted. A regression of 18 data points collected by the
Agrawal study for waterfilm thicknesses less than 0.25 cm
(0.10 in.) was performed. The relationship
HPS = 53.34 (WFT)- 02s9 (16)
was obtained for the dynamic hydroplaning speed HPS (km/
hr) as a fünction of the waterfilm thickness WFT (cm). In
U.S. customary units, the equátion is
HPS = 26.04 (WFT)-02s9 (17)
for the dynamic hydroplaning speed HPS in mph and the
waterfilm thickness WFTin inches. The study noted that con-
siderably more data are required to accurately establish this
relationship for waterfilm thicknesses less than 0.25 cm (0.10
in.). However, the critica! hydroplaning speed under this con-
dition is much higher, and full dynamic hydroplaning speed
is less likely to occur for waterfilms of this depth at legal
highway speeds.
LIABILITY FOR HYDROPLANING
Ali of the previously discussed factors- tire inflation pres-
sure, tread depth and design, pavement texture depth, pave-
ment slope, drainage path length, and rainfall intensity-
influence hydroplaning occurrence. But the recognition of
TRANSPORTATION RESEARCH RECORD 1401
environmental conditions creating sufficient water depths on
the pavement for the possibility of hydroplaning, and the
action of sustaining a reasonable operating speed under those
conditions, is the responsibility of the driver.
Loss of control due to high or unsafe speed is the direct
cause of most wet-weather accidents. If the driver chooses to
ignore high-intensity rainfall and continues to operate at speeds
considered high for the existing conditions, the probability of
dynamic hydroplaning is increased. With full dynamic hydro-
planing, the driver loses control over vehicle steering and
braking.
Driver expectations during rainfall must be realistic and
reasonable. Operating at posted speed limits greater than 80
km/hr (50 mph) under heavy rainfall places the driver at risk
of dynamic hydroplaning. Citations issued by law enforcement
personnel in many of these cases charge the driver with op-
erating the vehicle at a "speed unsafe for conditions" or "fail-
ure to control speed." Highway engineers must rely on the
prudence and reasonable operation of drivers during times of
rainfall or when water is on the pavement. Speed should be
reduced below 80 km/hr (50 mph) to decrease the probability
of full dynamic hydroplaning (10). Overt actions or reactions
by braking or steering should be carefully controlled when
encountering water on the pavement surface, because friction
capability is significantly reduced.
Responsibility for proper tire care and maintenance also
lies with the driver. Drivers must be relied upon to maintain
tire inflation pressures in accordance with the manufacturer's
specifications. Although the recommended inflation pressure
varíes for different types of tires, it is typically at or above
206.85 kPa (30 psi) for most passenger car tires. Tire care
and maintenance also imply the driver's responsibility to mon-
itor tire tread wear regularly and to reduce the effects of tread
wear on tire performance and safety by properly balancing
and rotating the tires at regular intervals. Tire tread depth
should be a mínimum of 0.159 cm (2/32 in.) to reduce the
vehicle's susceptibility to hydroplaning and to obtain optimum
wet traction performance (10).
Highway engineers have responsibility (liability) for prop-
erly designing, constructing, and maintaining the roadway
pavement to adequately drain surface water from normally
expected rainfalls. This includes the recognition and reme-
diation of pavement defects, failures, or areas prone to the
possibility of ponding water. However, as stated previously,
under the most desirable methods of design, construction,
and maintenance of a roadway for pavement surface drainage,
an atypical, high-intensity rainstorm can produce sheet flood-
ing or water ponding such that hydroplaning can occur.
Both transverse and longitudinal areas of water puddling
may develop on roadways because of wheel loads or failure
of the pavement over time. These "ruts" trap water and are
most likely to occur on flexible pavements and be of short
length. Studies indicate that hydroplaning can occur in these
areas when the length of the rut is 9.144 m (30 ft) or greater.
However, with normal cross slopes (::s2.5 percent), rut depths
of 0.61 cm (0.24 in.) or less do not significantly contribute to
a higher risk of hydroplaning (11).
Special attention must be given by highway engineers to
areas on roadways prone to ponding of water under high-
intensity rainfall rates. Drainage facilities should be empha-
sized that will rapidly collect and remove water from locations
7. Mounce and Bartoskewitz
of flat or sag vertical profile that are susceptible to hydro-
planing under heavy rainfall conditions.
Horizontal alignment tránsition areas with superelevation
also may create a "flat spot" in the transverse cross section
of a roadway. This is an especially critica! point where little
or no longitudinal slope exists to drain water away from the
traveled way. Highway engineers must anticipate the possi-
bility of ponding water on the pavement in this situation under
high-intensity rainfall and introduce drainage adjustments to
minimize the probability of hydroplaning.
HYDROPLANING AND ROADWAY TORT
LITIGATION
An increasing number of wet weather accidents have resulted
in lawsuits with claims of proximate cause being water on the
pavement surface inducing loss of control through hydro-
planing. Toe allegations in this litigation may be focused in
two areas: encountering sheet flooding or ponded areas of
water on the pavement surface and testimony regarding op-
erating speed and loss of control. The following hypothetical
legal cases involving hydroplaning and tort liability are pre-
sented to illustrate typical allegations versus factual evidence
and failure to fulfill duties (negligence) by either the driver
or the highway agency.
Case 1
Driver A was proceeding through a right-hand curve on a
two-lane, asphalt roadway during a moderate rain shower in
daylight. Just before completing the curve, Driver A lost con-
trol of the vehicle and crossed the centerline of the roadway,
sliding broadside into an opposing vehicle and injuring Driver
B. Driver A filed suit against the highway agency, alleging
that loss of control was due to hydroplaning, which resulted
from a roadway defect.
At the time of the accident, the roadway curve was well
marked and signed with an advance curve warning and an
advisory speed plate of 64 km/hr (40 mph). Radius of cur-
vature and cross slope (superelevation) were shown to be in
compliance for the classification of roadway and posted op-
erating speed. Tne pavement surface was well traveled, yet
shown to have a good coefficient of friction. No record of
complaints of comparable accidents at the same curve location
were found within a prior 3-year period. Both vehicles were
assessed in good mechanical condition, and their tires were
in adequate condition and properly inflated.
Driver A testified to a precollision speed below 64 km/hr
(40 mph). Damage to both vehicles indicated an impact speed
of greater than 80 km/hr (50 mph). The alleged hydroplaning
most probably would not have occurred at a speed of 64 km/
hr (40 mph) or less at this site under these geometric, pave-
ment, and tire conditions. Toe broadside skid was also indic- ·
ative of excessive speed above that posted and critica! for the
curve alignment.
Case 2
Driver C was traveling on a rural Interstate highway with a
posted regulatory speed of 104 km/hr (65 mph) approaching
123
a severe rainstorm. On encountering the rainfall, the vehicle
ran off the roadway and struck a tree within the divided me-
dian. Driver C sustained injuries in the collision, for which
suit was brought against the operating agency alleging hydro-
planing to be the cause of loss of vehicle control.
Toe highway was a four-lane, divided, tangent section at
the point ofvehicle departure from the roadway. The roadway
surface had been recently overlain with asphaltic concrete,
providing a high frictional ·coefficient. Cross slope at the lo-
cation was measured and found to be in compliance with
published criteria.
Driver C testified that he was traveling at 104 km/hr (65
mph) when loss of vehicle control occurred. Other motorists
testified to reducing speed to 80 km/hr (50 mph) because of
the obvious reduction in visibility and extent of water on the
pavement from the rainstorm. Meteorological data indicated
the rainfall intensity for the thunderstorm associated with the
accident to be near 10.2 cm/hr (4 in./hr) and the cause of
flooding damage.
In this case, Driver C may have lost control of the vehicle
as a result of hydroplaning upon encountering water on the
pavement surface of considerable depth. Driver C may have
left the roadway because of poor visibility or may have lost
control of the vehicle as a result of inappropriate steering or
braking reactions to hydrodynamic forces. However, it is likely
that this accident was the direct result of Driver C's failure
to recognize and respond to adverse weather conditions. Rea-
sonable and prudent action on the part of Driver C, in the
forro of a speed reduction, would have likely avoided this
accident.
Case 3
Driver D was traveling on a two-lane, asphalt roadway en-
tering a left-hand curve during slight rainfall. Loss of control
caused the vehicle to continue in a straight line off an em-
bankment to the outside of the curve. Driver D alleged that
water encountered on the roadway caused hydroplaning and
the subsequent loss of vehicle control. Suit was brought against
the operating agency for negligence in design, construction, ·
and maintenance resulting in a highway defect.
Driver D testified that he was traveling at the posted speed
limit of 88 km/hr (55 mph) at the time of the accident. The
pavement surface was wom and polished with a marginal, yet
adequate, coefficient of friction. The location of the water
encountered was determined to be in the superelevation tran-
sition from normal, crown cross slope to banked cross slope
(superelevation). The transverse grade of an area on the road-
way in this transition was measured and determined to be less
than 0.05 percent. This "flat" area was compounded by also
being at the sag (low) point of a longitudinal vertical grade.
Furthermore, evidence indicated an average of five compa-
rable accidents per year for this site for the 3 years before the
accident. ·
For the existing geometric and pavement conditions, it was
possible for hydroplaning to have occurred because of water
on the roadway for a motorist traveling at the posted speed
limit under normally expected rainfall intensitiés. The path
of departure also indicated little orno vehicle control, typical
of full dynamic hydroplaning. The agency had a duty and
8. 124
responsibility to recognize the combination of conditions con-
ducive to poor drainage of the roadway and to remediate those
conditions.
CONCLUSIONS
Many roadway tort liability claims are being made with little
or no factual basis to substantiate allegations of hydroplaning
as a causative factor. The physical phenomena of dynamic
hydroplaning can only be possible at a designated mínimum
speed when water depth on the roadway exceeds the com-
bined surface macrotexture depth and tire tread depth. Other
factors of influence, such as tire inflation pressure and tire
footprint size and shape, may adjust the calculation óf the
critica! hydroplaning speed.
Highway engineers have responsibility for roadway factors
affecting friction capability, such as pavement texture design
and depth, and surface drainage, such as cross slope, super-
elevation transition, longitudinal grade, and length of the
transverse drainage path. Engineers must design, construct,
and maintain streets and highways in a manner ensuring proper
surface drainage to minimize the probability of water accu-
mulation under normal rainfall conditions.
Motorists must also accept responsibility for their driving
behavior during periods of rainfall. A reasonable and prudent
driver should recognize the greater potential danger of op-
erating a vehicle in a wet roadway environment and reduce
vehicle speed to minimize the risk of losing control of the
vehicle. For most cases of full dynamic hydroplaning (assum-
ing adequate tire tread and proper tire inflation), the vehicle
speed at which hydroplaning is observed would be considered
unsafe or not prudent for the amount ofwater on the roadway.
Judges and juries in cases of roadway tort litigation must
determine whether hydroplaning occurred and its relevance
as a causative factor in many accidénts. In addition, assess-
ment must be made as to responsibility for conditions that
result in hydroplaning. These decisions can only be made with
factual information about the physical phenomenon of hy-
droplaning and factors influencing both the roadway and ve-
hicle. It is hoped that this paper has addressed issues relevant
to hydroplaning and roadway tort litigation in an informative
and helpful manner.
REFERENCES
l. Fatal Accident Reporting System. DOT-HS-807-794. NHTSA, U.S.
Department of Transportation, Dec. 1991.
2. Single Variable Accident Tabulations. Texas Department of
Transportation, July 1992.
3. Road Surface Characteristics: Their Interaction and Their Optim-
isation. Organisation for 1=,conomic Cooperation and Develop-
ment, París, 1984.
4. J. S. Creswell, D. F. Dunlap, and J. A. Green. NCHRP Repon
176: Studded Tires and Highway Safety~· Feasibility ofDetermining
TRANSPORTATION RESEARCH RECORD 1401
lndirect Benefits. TRB, National Research Council, Washington,
D.C., 1977.
5. R. Pelloli. Road Surface Characteristics and Hydroplaning. In
Transportation Research Record 624, TRB, National Research
Council, Washington, D.C., 1976.
6. W. B. Home. Status ofRunway Slipperiness Research. In Trans-
portation Research Record 62ll, TRB, Na.tional Research Council,
Washington, D.C., 1976.
7. W. B. Home and F. Buhlmann. A Method for Rating the Skid
Resistance and Micro/Macrotexture Characteristics ofWet Pave-
ments. In Frictional Interaction of Tire and Pavement, ASTM
STP 793 (W. E. Meyer and J. D. Walter, eds.), American Society
for Testing and Materials, 1983, pp. 191-218.
8. R. W. Yeager. Tire Hydroplaning: Testing, Analysis, and De-
sign. In The Physics of Tire Traction: Theory and Experiment
(D. F. Hays and A. L. Browne, eds.), Plenum Press, New York,
1974.
9. A. L. Browne. Mathematical Analysis for Pneumatic Tire Hy-
droplaning. In Surface Texture Versus Skidding: Measurements,
Frictional Aspects, and Safety Features of Tire-Pavement lnter-
actions, ASTM STP 583, American Society for Testing and Ma-
terials, 1975, pp. 75-94.
10. B. M. Gallaway, F. C. Benson, J. M. Mounce, H. H. Bissell,
and M. J. Rosenbaum. Pavement Surface. In Synthesis of Safety
Research Related to Traffic Control and Roadway Elements, Vol.
l. FHWA-TS-82-232. FHWA, U.S. Department of Transpor-
tation, Dec. 1982.
11. G. G. Balmer and B. M. Gallaway. Pavement Design and Con-
trols for Minimizing Automotive Hydroplaning and Increasing
Traction. In Frictional lnteraction of Tire and Pavement, ASTM
STP 793 (W. E. MeyerandJ. D. Walter, eds.), American Society
for Testing and Materials, 1983, pp. 167-190.
12. W. B. Home. Predicting the Mínimum Dynamic Hydroplaning
Speed for Aircraft, Bus, Truck, and Automobile Tires Rolling
on Flooded Pavements. Presented to ASTM Committee E-17
Meeting at the Texas Transportation Institute, College Station,
Tex., June 1984.
13. D. L. Ivey. Truck Tire Hydroplaning-Empirical Confirmation
of Horne's Thesis. Texas Transportation Institute, Texas A&M
University System, College Station, Nov. 1984.·· ·
14. W. B. Home, T. J. Yager, and D. L. Ivey. Recent Studies To
Investigate Effects of Tire Footprint Aspect Ratio on Dynamic
Hydroplaning Speed. The Tire Pavement Interface, ASTM STP
929 (M. G. Pottinger and T. J. Yager, eds.), American Society
for Testing and Materials, Philadelphia, Pa., 1986, pp. 26~46.
15. N. C. Yang. Design ofFunctional Pavements. McGraw-Hill Book
Company, New York, 1972.
16. W. B. Home and U. T. Joyner. Pneumatic Tire Hydroplaning
and Sorne Effects on Vehicle Performance. SAE Paper 970C,
Jan. 1965.
17. B. M. Gallaway, D. L. Ivey, G. Rayes, W. B. Ledbetter, R.M.
Olson, D. L. Woods, and R. F. Schiller, Jr. Pavement and Geo-
metric Design Criteria for Minimizing Hydroplaning. FHWA-
RD-79-31. FHWA, U.S. Department of Transportation, Dec.
1979.
18. S. K. Agrawal, W. E. Meyer and J. J. Henry. Measurement of
Hydroplaning Potential. FHWA-PA-72-6. Pennsylvania Trans-
portation Institute, Toe Pennsylvania State University, Feb. 1977.
19. R. S. Huebner, J. R. Reed, and J. J. Henry. Criteria for Pre-
dicting Hydroplaning Potential. Journal of Transportation En-
gineering, Vol. 112, No. 5, Sept. 1986, pp. 549-553.
Publication of this paper sponsored by Committee on Tort Liability
and Risk Management.