International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
Overview of the world's first true single-chip wireless power transmitter (IDTP9030), and the world's highest-output-power single-chip receiver solution (IDTP9020). This silicon-based IC solution facilitates the design of wireless power (electromagnetic inductive) charging bases and wirelessly powered battery charging on mobile devices. The highly integrated multi-mode transmitter reduces board footprint by 80 percent and bill-of-materials (BOM) cost by 50 percent compared to existing solutions. Designed to be WPC Qi-compliant, both devices are capable of "multilingual" (multi-mode) operation, supporting both the Qi standard as well as proprietary formats for added features, improved safety, and increased power output capability. Demonstration presented by Jack Deans, Field Applications Manager at IDT. Visit http://www.idt.com/products/power-management/wireless-power.
Overview of the world's first true single-chip wireless power transmitter (IDTP9030), and the world's highest-output-power single-chip receiver solution (IDTP9020). This silicon-based IC solution facilitates the design of wireless power (electromagnetic inductive) charging bases and wirelessly powered battery charging on mobile devices. The highly integrated multi-mode transmitter reduces board footprint by 80 percent and bill-of-materials (BOM) cost by 50 percent compared to existing solutions. Designed to be WPC Qi-compliant, both devices are capable of "multilingual" (multi-mode) operation, supporting both the Qi standard as well as proprietary formats for added features, improved safety, and increased power output capability. Demonstration presented by Jack Deans, Field Applications Manager at IDT. Visit http://www.idt.com/products/power-management/wireless-power.
The Nutrition Center is a Standing cane machine . Using a low speed of 80 RPMs results in minimal heat build up and oxidation promoting healthy enzymes and longer Big type sugar cane juicer machine. The low oxidation of the fruit will keep juices fresh up to 72 hours. Designed and engineered for health-conscious individuals who want a greater variety in their daily Standing cane machine , these units have the ability to also juice everything from juicer and leafy greens to fruits without changing any attachments.
Temperature Based Fan Controller can be used for reducing the power consumption & also to assist people who are disabled and are unable to control the speed of fan.It may also be used for monitoring changes in environment.
final Year Projects, Final Year Projects in Chennai, Software Projects, Embedded Projects, Microcontrollers Projects, DSP Projects, VLSI Projects, Matlab Projects, Java Projects, .NET Projects, IEEE Projects, IEEE 2009 Projects, IEEE 2009 Projects, Software, IEEE 2009 Projects, Embedded, Software IEEE 2009 Projects, Embedded IEEE 2009 Projects, Final Year Project Titles, Final Year Project Reports, Final Year Project Review, Robotics Projects, Mechanical Projects, Electrical Projects, Power Electronics Projects, Power System Projects, Model Projects, Java Projects, J2EE Projects, Engineering Projects, Student Projects, Engineering College Projects, MCA Projects, BE Projects, BTech Projects, ME Projects, MTech Projects, Wireless Networks Projects, Network Security Projects, Networking Projects, final year projects, ieee projects, student projects, college projects, ieee projects in chennai, java projects, software ieee projects, embedded ieee projects, "ieee2009projects", "final year projects", "ieee projects", "Engineering Projects", "Final Year Projects in Chennai", "Final year Projects at Chennai", Java Projects, ASP.NET Projects, VB.NET Projects, C# Projects, Visual C++ Projects, Matlab Projects, NS2 Projects, C Projects, Microcontroller Projects, ATMEL Projects, PIC Projects, ARM Projects, DSP Projects, VLSI Projects, FPGA Projects, CPLD Projects, Power Electronics Projects, Electrical Projects, Robotics Projects, Solor Projects, MEMS Projects, J2EE Projects, J2ME Projects, AJAX Projects, Structs Projects, EJB Projects, Real Time Projects, Live Projects, Student Projects, Engineering Projects, MCA Projects, MBA Projects, College Projects, BE Projects, BTech Projects, ME Projects, MTech Projects, M.Sc Projects, Final Year Java Projects, Final Year ASP.NET Projects, Final Year VB.NET Projects, Final Year C# Projects, Final Year Visual C++ Projects, Final Year Matlab Projects, Final Year NS2 Projects, Final Year C Projects, Final Year Microcontroller Projects, Final Year ATMEL Projects, Final Year PIC Projects, Final Year ARM Projects, Final Year DSP Projects, Final Year VLSI Projects, Final Year FPGA Projects, Final Year CPLD Projects, Final Year Power Electronics Projects, Final Year Electrical Projects, Final Year Robotics Projects, Final Year Solor Projects, Final Year MEMS Projects, Final Year J2EE Projects, Final Year J2ME Projects, Final Year AJAX Projects, Final Year Structs Projects, Final Year EJB Projects, Final Year Real Time Projects, Final Year Live Projects, Final Year Student Projects, Final Year Engineering Projects, Final Year MCA Projects, Final Year MBA Projects, Final Year College Projects, Final Year BE Projects, Final Year BTech Projects, Final Year ME Projects, Final Year MTech Projects, Final Year M.Sc Projects, IEEE Java Projects, ASP.NET Projects, VB.NET Projects, C# Projects, Visual C++ Projects, Matlab Projects, NS2 Projects, C Projects, Microcontroller Projects, ATMEL Projects, PIC Projects, ARM Projects, DSP Projects, VLSI Projects, FPGA Projects, CPLD Projects, Power Electronics Projects, Electrical Projects, Robotics Projects, Solor Projects, MEMS Projects, J2EE Projects, J2ME Projects, AJAX Projects, Structs Projects, EJB Projects, Real Time Projects, Live Projects, Student Projects, Engineering Projects, MCA Projects, MBA Projects, College Projects, BE Projects, BTech Projects, ME Projects, MTech Projects, M.Sc Projects, IEEE 2009 Java Projects, IEEE 2009 ASP.NET Projects, IEEE 2009 VB.NET Projects, IEEE 2009 C# Projects, IEEE 2009 Visual C++ Projects, IEEE 2009 Matlab Projects, IEEE 2009 NS2 Projects, IEEE 2009 C Projects, IEEE 2009 Microcontroller Projects, IEEE 2009 ATMEL Projects, IEEE 2009 PIC Projects, IEEE 2009 ARM Projects, IEEE 2009 DSP Projects, IEEE 2009 VLSI Projects, IEEE 2009 FPGA Projects, IEEE 2009 CPLD Projects, IEEE 2009 Power Electronics Projects, IEEE 2009 Electrical Projects, IEEE 2009 Robotics Projects, IEEE 2009 Solor Projects, IEEE 2009 MEMS Projects, IEEE 2009 J2EE P
This ppt explains Metal Detector Robotic Vehicle, student is provided with his/her authorized tag to swipe over the reader to record their attendance.
Edgefxkits.com has a wide range of electronic projects ideas that are primarily helpful for ECE, EEE and EIE students and the ideas can be applied for real life purposes as well.
http://www.edgefxkits.com/
Visit our page to get more ideas on popular electronic projects developed by professionals.
Edgefx provides free verified electronic projects kits around the world with abstracts, circuit diagrams, and free electronic software. We provide guidance manual for Do It Yourself Kits (DIY) with the modules at best price along with free shipping.
3. Introduction:
Traffic lights have become an integral part of human’s day-
to-day life.
With this motivation in the mind, this project aims at
designing and implementing, a running model of traffic
light controller which is controlled according to the density
of vehicle on road.
We will use AT89s52 microcontroller and Infra red sensor
for performing all the computation and control related task.
6. Colors:
The most common colors used in traffic lights are red,
amber (yellow), and green. Red typically means stop or
high level of danger; amber typically means caution; and
green typically means proceed with care.
Usually, the red light contains some orange in its hue, and
the green light contains some blue, to provide some support
for people with red-green color blindness.
Some traffic lights typically have a white reflective border
which enables color blind users, during the hours of
darkness, to distinguish the lights from other similarly-
colored street or automobile lights, and to allow them to
distinguish the lights by vertical position.
7. AT89S52 Microcontroller:
When we have to learn about a new computer we have to
familiarize about the machine capability we are using, and
we can do it by studying the internal hardware design
(devices architecture), and also to know about the size,
number and the size of the registers.
A microcontroller is a single chip that contains the
processor (the CPU), non-volatile memory for the program
(ROM or flash), volatile memory for input and output
(RAM), a clock and an I/O control unit.
Also called a "computer on a chip," billions of
microcontroller units (MCUs) are embedded each year in a
myriad of products from toys to appliances to automobiles.
8. The AT89S52 is a low-power, high-performance CMOS 8-
bit microcontroller with 8K bytes of in-system
programmable Flash memory.
The device is manufactured using Atmel’s high-density
nonvolatile memory technology and is compatible with the
industry-standard 80C51 instruction set and pinout.
The AT89S52 provides the following standard features: 8K
bytes of Flash, 256 bytes of RAM, 32 I/O lines, Watchdog
timer, two data pointers, three 16-bit timer/counters, a six-
vector two-level interrupt architecture, a full duplex serial
port, on-chip oscillator, and clock circuitry.
In addition, the AT89S52 is designed with static logic for
operation down to zero frequency and supports two
software selectable power saving modes.
9. . The Idle Mode stops the CPU while
allowing the RAM, timer/counters,
serial port, and interrupt system to
continue functioning.
The Power-down mode saves the
RAM con-tents but freezes the
oscillator, disabling all other chip
functions until the next interrupt.
The hardware is driven by a set of
program instructions, or software.
Once familiar with hardware and
software, the user can then apply the
microcontroller to the problems
easily.
10. The 8051 architecture consists of these
specific features:
16 bit PC &data pointer (DPTR)
8 bit program status word (PSW)
8 bit stack pointer (SP)
Internal ROM 4k
Internal RAM of 128 bytes.
4 register banks, each containing
8 registers
80 bits of general purpose data
memory
32 input/output pins arranged as
four 8 bit ports:P0-P3
Two 16 bit timer/counters: T0-T1
Two external and three internal
interrupt sources
Oscillator and clock circuits
11. INFRARED LED'S:
Gallium arsenide is a direct-gap semiconductor with an
energy gap of 1.4eV at room temperature.
A typical GaPs LED is made by solid-state impurity
diffusion with zinc as the p-type impurity diffused into an
n-type substrate doped with tin, tellurium or silicon.
The external efficiency at room temperature is typically 5
percent.
A GaAs diode can also be fabricated by liquid-phase
epitaxial with silicon as both its n and p dopants.
If a silicon atom replaces a Ga atom, it provides one
additional electron, thus the resulting GaAs in as n-type.
12. If a silicon atom replaces arsenic atoms, an electron is missing
and the resulting GaAs is a p-type. In Si doped GaAs diode, the
emission peak shifts down to 1.32eV.
Since the emission is in infrared region, GaAs light sources are
suitable for application such as the optical isolator.
The high switching speed, with a recovery time between 2 and
10ns, makes them ideal for data transmission.
The disadvantages of the GaAs emitter are emitted wavelength
and the associated attenuation an dispersion.
A critical issue of using an LED for the fibre optics is the
coupling of light from the semiconductor to the fibre.
Because of the larger refractive index of GaAs relative to air,
the internal efficiency of LED can be quite low
13. 555 timer:
The buffer circuit's input has a very high impedance (about
1M ) so it requires only a few µA, but the output can sink
or source up to 200mA.
This enables a high impedance signal source (such as an
LDR) to switch a low impedance output transducer (such as
a lamp).
It is an inverting buffer or NOT gate because the output
logic state (low/high) is the inverse of the input state.
Input low (< 1/3 Vs) makes output high, +Vs.
Input high (> 2/3 Vs) makes output low, 0V .
14. When the input voltage is between 1/3
and 2/3 Vs the output remains in its
present state.
This intermediate input region is a dead
space where there is no response, a
property called hysteresis, it is like
backlash in a mechanical linkage. This
type of circuit is called a Schmitt
trigger.
If high sensitivity is required the
hysteresis is a problem, but in many
circuits it is a helpful property.
It gives the input a high immunity to
noise because once the circuit output
has switched high or low the input must
change back by at least 1/3 Vs to make
the output switch back.
15. PHOTO SEMICONDUCTOR:
A Germanium or silicon diode or transistor, which has a
transparent encasing, can serve as a photodiode or
transistor because the light photons can initiate conduction
in the p-n- junction region.
Early devices such as the OCP 71 were Ge-devices. Later,
silicon types became available with lower leakage current
and better light sensitivity
In a phototransistor, the base lead is not used; but, if a
resistor is connected form base to emitter it reduced the
light sensitivity.
16. Darlington connected photo transistors (two transistors
together in one case) such as the 2N5777 are very sensitive
with a hFE of 2.5K, a dark current of 100nA and a light
current of 0.5-2.0mA for light flux density H=2mW/cm2.
The device is rated 200mW and voltage of 25V maximum.
SCRs with a light window are also available, called as
LASCR, which are very sensitive and can turn mains power
ON and OFF, with light.
The switching speed of phototransistors far exceeds those
of LDRs, made of CdS. The rise time for the 2N5777 is 75s
and fall time is 50s.
Maximum switching speed is 1KHz. Photo devices are
useful in optical encoding, intrusion alarms, tape readers,
level control, character recognition etc.
17. LIGHT EMITTING DIODE:
Light emitting diode (LED) is basically a P-N junction
semiconductor diode particularly designed to emit visible
light.
There are infrared emitting LEDs which emit invisible
light. The LEDs are now available in many colors red,
green and yellow.
A normal LED emits at 2.4V and consumes MA of current.
The LEDs are made in the form of flat tiny P-N junction
enclosed in a semi-spherical dome made up of clear colored
epoxy resin.
The dome of a LED acts as a lens and diffuser of light. The
diameter of the base is less than a quarter of an inch.
18. The actual diameter varies somewhat with
different makes.
It is similar to the conventional rectifier diode
symbol with two arrows pointing out.
There are two leads- one for anode and the other
for cathode.
LEDs often have leads of dissimilar length and
the shorter one is the cathode.
All manufacturers do not strictly adhere this to.
Sometimes the cathode side has a flat base.
If there is doubt, the polarity of the diode should
be identified.
19. Circuit Diagram: As shown in the circuit a microcontroller is
programmed to automatically “ON” and
“OFF” the LEDs (traffic light).
The crystal oscillator is provides the
necessary clocking for the microcontroller to
work properly.
The four traffic lights, shown as 4 groups of 3
LEDs (Red, Green, Yellow), is actually
installed at each of the four roads.
The necessary stabilized power source is
designed by the use of LM7805, as shown
above (in the lower figure).
The whole circuit will be implemented on a
zero PCB. The programming of the
Microcontroller can be done either in C or in
Assembly, using a programmer.