SCR-Based ESD Protection Designs for RF ICsjournal ijrtem
Abstract: CMOS technology has been used to implement the radio-frequency integrated circuits (RF ICs). However, it was known that advanced CMOS technologies seriously degrade the electrostatic discharge (ESD) robustness of ICs. Therefore, on-chip ESD protection devices must be added into the chip, including RF ICs. To minimize the impacts from ESD protection devices on RF performances, the ESD protection at RF pads must be carefully designed. A review on ESD protection designs with silicon-controlled rectifier (SCR) devices in RF ICs is presented in this article. Keywords: CMOS, ESD, RF, SCR.
Aq7275 Hướng dẫn sử dụng máy đo sợi cáp quang Yokogawa otdrMr Calvin Pham
Máy đo sợi cáp quang OTDR model AQ7275 là dòng máy đo chuẩn và chính xác trên thị trường. Tuổi thọ Pin của máy đo cao, dễ dàng thay thế và sữa chữa
tham khảo chi tiết tại : www.phukienquang.net
Seaward has over 70 years experience in the design manufacture of market-leading electrical test equipment. Seaward’s unrivalled range of electrical test equipment serves a wide variety of safety testing and precision measurement applications. For 25 years Seaward has been developing market-defining portable appliance testers, software and accessories for the PAT testing market.
The Cropico and Clare ranges of precision instruments and industrial electrical test equipment bolster Seaward’s product offering and demonstrate the result of 70 years of technical expertise across a number of industries including manufacturing, utilities and aerospace.
The all-inclusive Seaward electrical test equipment range now encompasses:
PAT Testing
Installation Testing
Electrical Test Tools
High Voltage Testing
Industrial Testing and Measurement
Micro Ohmmeters
Hipot Testers
Resistance Standards
Decade Boxes
SCR-Based ESD Protection Designs for RF ICsjournal ijrtem
Abstract: CMOS technology has been used to implement the radio-frequency integrated circuits (RF ICs). However, it was known that advanced CMOS technologies seriously degrade the electrostatic discharge (ESD) robustness of ICs. Therefore, on-chip ESD protection devices must be added into the chip, including RF ICs. To minimize the impacts from ESD protection devices on RF performances, the ESD protection at RF pads must be carefully designed. A review on ESD protection designs with silicon-controlled rectifier (SCR) devices in RF ICs is presented in this article. Keywords: CMOS, ESD, RF, SCR.
Aq7275 Hướng dẫn sử dụng máy đo sợi cáp quang Yokogawa otdrMr Calvin Pham
Máy đo sợi cáp quang OTDR model AQ7275 là dòng máy đo chuẩn và chính xác trên thị trường. Tuổi thọ Pin của máy đo cao, dễ dàng thay thế và sữa chữa
tham khảo chi tiết tại : www.phukienquang.net
Seaward has over 70 years experience in the design manufacture of market-leading electrical test equipment. Seaward’s unrivalled range of electrical test equipment serves a wide variety of safety testing and precision measurement applications. For 25 years Seaward has been developing market-defining portable appliance testers, software and accessories for the PAT testing market.
The Cropico and Clare ranges of precision instruments and industrial electrical test equipment bolster Seaward’s product offering and demonstrate the result of 70 years of technical expertise across a number of industries including manufacturing, utilities and aerospace.
The all-inclusive Seaward electrical test equipment range now encompasses:
PAT Testing
Installation Testing
Electrical Test Tools
High Voltage Testing
Industrial Testing and Measurement
Micro Ohmmeters
Hipot Testers
Resistance Standards
Decade Boxes
MEMS 1x N optical switch from OEM ODM Factory Shenzhen Hifibercom Technology ...WendyXia8
Optical switch have a wide range of applications in fiber
communication systems, and their implementation technologies
are diverse, including: mechanical optical switch, thermo-optic
switch, acousto-optic switch, electro-optic switch,
magneto-optical switch, and MEMS optical switch, etc. The
MEMS optical switch is a high-tech product based on
MEMS(Micro-Electro-Mechanical System) technology. It has
the characteristics of small size, low power consumption, and
good expandability. It is widely used in optical network
scenarios such as ROADM, iODF and fiber sensing etc
1.2V Analog I/O library for TSMC 65nm technologySofics
Sofics has verified its TakeCharge ESD protection clamps on technology nodes between 0.25um CMOS down to 5nm across various fabs and foundries. The ESD clamps are silicon and product proven in more than 4500 mass produced IC-products. The cells provide competitive advantage through improved yield, reduced silicon footprint and enable advanced multimedia and wireless interfaces like HDMI, USB 3.0, SATA, WIFI, GPS and Bluetooth.
Benefits of enhanced event analysis in datacenter otdr testingFangXuIEEE
Automatic detection and analysis algorithm of events in OTDR traces is very a challenging signal processing and analysis problem. It has too many tradeoffs to overcome: sensitivity vs. reliability, complexity vs. execution time. Traditional signal processing methods quickly reach performance limits. This is a place to demonstrate peoples creativity of finding exotic algorithm and method.
400 Watt Jinko MONO PERC Solar Panel
Available for Solar System
call now to get best solar system with Jinko Solar System
contact us 0332 4129441
#jinkosolar #cheetah #MONOSOLAR #JINKOMONOSOLARPANEL
https://www.pakistansolartraders.com/jinko-solar-panel/
Radiation Hardening by Design is one of the hardware based solution to one of the most troublesome problem faced by digital circuits in the space.
RHBD provides varieties of techniques to make the circuit resilient towards such effects and ensures proper malfunctioning of the circuit.
Optimized Local I/O ESD Protection for SerDes In Advanced SOI, BiCMOS and Fin...Sofics
Sofics presentation (B2.2) at the 1st International EOS/ESD Symposium on Design and System (IEDS). IEDS is dedicated to the fundamental understanding of issues related to electrostatic discharge on design and system and the application of this knowledge to the solution of problems.
Semiconductor companies are developing ever faster interfaces to satisfy the need for higher data throughputs. However, the parasitic capacitance of the traditional ESD solutions limits the signal frequency. This paper demonstrates low-cap Analog I/Os for high speed SerDes (28Gbps to 112Gbps) circuits created in advanced BiCMOS, SOI and FinFET nodes.
1.2V Analog I/O with full local ESD protection for TSMC 65nm technologySofics
Sofics has verified its TakeCharge ESD protection clamps on technology nodes between 0.25um CMOS down to 5nm across various fabs and foundries. The ESD clamps are silicon and product proven in more than 4500 mass produced IC-products. The cells provide competitive advantage through improved yield, reduced silicon footprint and enable advanced multimedia and wireless interfaces like HDMI, USB 3.0, SATA, WIFI, GPS and Bluetooth.
The Analog I/O clamp described in this document can be used for 1.2V pads in the TSMC 65nm CMOS technology. It has a full local ESD protection and integrated power clamp. The bus resistance is thus not important for IO related ESD stress.
1.2V Over-voltage tolerant Analog I/O for TSMC 65nm technologySofics
Sofics has verified its TakeCharge ESD protection clamps on technology nodes between 0.25um CMOS down to 5nm across various fabs and foundries. The ESD clamps are silicon and product proven in more than 4500 mass produced IC-products. The cells provide competitive advantage through improved yield, reduced silicon footprint and enable advanced multimedia and wireless interfaces like HDMI, USB 3.0, SATA, WIFI, GPS and Bluetooth.
The Analog I/O clamp described in this document can be used for 1.2V pads in the TSMC 65nm CMOS technology. It is over-voltage tolerant, suitable for hot-swap, cold-spare, open-drain interfaces.
Tsmc65 1v2 full local protection analog io + cdmSofics
Sofics has verified its TakeCharge ESD protection clamps on technology nodes between 0.25um CMOS down to 5nm across various fabs and foundries. The ESD clamps are silicon and product proven in more than 4500 mass produced IC-products. The cells provide competitive advantage through improved yield, reduced silicon footprint and enable advanced multimedia and wireless interfaces like HDMI, USB 3.0, SATA, WIFI, GPS and Bluetooth.
The Analog I/O clamp described in this document can be used for 1.2V pads in the TSMC 65nm CMOS technology. It has a full local ESD protection and integrated power clamp. The bus resistance is thus not important for IO related ESD stress.
The cell also includes a CDM secondary protection.
1.2V core power clamp for TSMC 65nm technologySofics
Sofics has verified its TakeCharge ESD protection clamps on technology nodes between 0.25um CMOS down to 5nm across various fabs and foundries. The ESD clamps are silicon and product proven in more than 4500 mass produced IC-products. The cells provide competitive advantage through improved yield, reduced silicon footprint and enable advanced multimedia and wireless interfaces like HDMI, USB 3.0, SATA, WIFI, GPS and Bluetooth.
The ESD clamp described in this document protects 1.2V core domains in TSMC 65nm CMOS technology.
MEMS 1x N optical switch from OEM ODM Factory Shenzhen Hifibercom Technology ...WendyXia8
Optical switch have a wide range of applications in fiber
communication systems, and their implementation technologies
are diverse, including: mechanical optical switch, thermo-optic
switch, acousto-optic switch, electro-optic switch,
magneto-optical switch, and MEMS optical switch, etc. The
MEMS optical switch is a high-tech product based on
MEMS(Micro-Electro-Mechanical System) technology. It has
the characteristics of small size, low power consumption, and
good expandability. It is widely used in optical network
scenarios such as ROADM, iODF and fiber sensing etc
1.2V Analog I/O library for TSMC 65nm technologySofics
Sofics has verified its TakeCharge ESD protection clamps on technology nodes between 0.25um CMOS down to 5nm across various fabs and foundries. The ESD clamps are silicon and product proven in more than 4500 mass produced IC-products. The cells provide competitive advantage through improved yield, reduced silicon footprint and enable advanced multimedia and wireless interfaces like HDMI, USB 3.0, SATA, WIFI, GPS and Bluetooth.
Benefits of enhanced event analysis in datacenter otdr testingFangXuIEEE
Automatic detection and analysis algorithm of events in OTDR traces is very a challenging signal processing and analysis problem. It has too many tradeoffs to overcome: sensitivity vs. reliability, complexity vs. execution time. Traditional signal processing methods quickly reach performance limits. This is a place to demonstrate peoples creativity of finding exotic algorithm and method.
400 Watt Jinko MONO PERC Solar Panel
Available for Solar System
call now to get best solar system with Jinko Solar System
contact us 0332 4129441
#jinkosolar #cheetah #MONOSOLAR #JINKOMONOSOLARPANEL
https://www.pakistansolartraders.com/jinko-solar-panel/
Radiation Hardening by Design is one of the hardware based solution to one of the most troublesome problem faced by digital circuits in the space.
RHBD provides varieties of techniques to make the circuit resilient towards such effects and ensures proper malfunctioning of the circuit.
Optimized Local I/O ESD Protection for SerDes In Advanced SOI, BiCMOS and Fin...Sofics
Sofics presentation (B2.2) at the 1st International EOS/ESD Symposium on Design and System (IEDS). IEDS is dedicated to the fundamental understanding of issues related to electrostatic discharge on design and system and the application of this knowledge to the solution of problems.
Semiconductor companies are developing ever faster interfaces to satisfy the need for higher data throughputs. However, the parasitic capacitance of the traditional ESD solutions limits the signal frequency. This paper demonstrates low-cap Analog I/Os for high speed SerDes (28Gbps to 112Gbps) circuits created in advanced BiCMOS, SOI and FinFET nodes.
1.2V Analog I/O with full local ESD protection for TSMC 65nm technologySofics
Sofics has verified its TakeCharge ESD protection clamps on technology nodes between 0.25um CMOS down to 5nm across various fabs and foundries. The ESD clamps are silicon and product proven in more than 4500 mass produced IC-products. The cells provide competitive advantage through improved yield, reduced silicon footprint and enable advanced multimedia and wireless interfaces like HDMI, USB 3.0, SATA, WIFI, GPS and Bluetooth.
The Analog I/O clamp described in this document can be used for 1.2V pads in the TSMC 65nm CMOS technology. It has a full local ESD protection and integrated power clamp. The bus resistance is thus not important for IO related ESD stress.
1.2V Over-voltage tolerant Analog I/O for TSMC 65nm technologySofics
Sofics has verified its TakeCharge ESD protection clamps on technology nodes between 0.25um CMOS down to 5nm across various fabs and foundries. The ESD clamps are silicon and product proven in more than 4500 mass produced IC-products. The cells provide competitive advantage through improved yield, reduced silicon footprint and enable advanced multimedia and wireless interfaces like HDMI, USB 3.0, SATA, WIFI, GPS and Bluetooth.
The Analog I/O clamp described in this document can be used for 1.2V pads in the TSMC 65nm CMOS technology. It is over-voltage tolerant, suitable for hot-swap, cold-spare, open-drain interfaces.
Tsmc65 1v2 full local protection analog io + cdmSofics
Sofics has verified its TakeCharge ESD protection clamps on technology nodes between 0.25um CMOS down to 5nm across various fabs and foundries. The ESD clamps are silicon and product proven in more than 4500 mass produced IC-products. The cells provide competitive advantage through improved yield, reduced silicon footprint and enable advanced multimedia and wireless interfaces like HDMI, USB 3.0, SATA, WIFI, GPS and Bluetooth.
The Analog I/O clamp described in this document can be used for 1.2V pads in the TSMC 65nm CMOS technology. It has a full local ESD protection and integrated power clamp. The bus resistance is thus not important for IO related ESD stress.
The cell also includes a CDM secondary protection.
1.2V core power clamp for TSMC 65nm technologySofics
Sofics has verified its TakeCharge ESD protection clamps on technology nodes between 0.25um CMOS down to 5nm across various fabs and foundries. The ESD clamps are silicon and product proven in more than 4500 mass produced IC-products. The cells provide competitive advantage through improved yield, reduced silicon footprint and enable advanced multimedia and wireless interfaces like HDMI, USB 3.0, SATA, WIFI, GPS and Bluetooth.
The ESD clamp described in this document protects 1.2V core domains in TSMC 65nm CMOS technology.
JTOPTICS® presents the 10GBASE SR 300m SFPP optical transceiver, denoted as the 10G SFPP SR (JT 10G SFPP DD SR) SFP+ transceiver. This SFP+ module supports link lengths of up to 400m over OM4 MMF (300m over OM3 MMF) through an LC duplex connector. The transceiver offers digital diagnostics monitoring via a 2-wire serial interface, following the specifications outlined in SFF 8472. Each SFP+ transceiver module undergoes individual testing to ensure compatibility with Cisco switches, routers, servers, network interface cards (NICs), and similar devices.
Key Features:
Full duplex transceiver module for efficient bidirectional communication.
Utilizes a hot-pluggable SFP+ form factor for convenient installation.
Compliant with the SFP+ MSA standard, ensuring interoperability.
Incorporates a VCSEL transmitter and PIN receiver for reliable data transmission.
Supports a data rate of up to 11.3Gbps for high-speed performance.
Compliance with CPRI specifications for specific telecommunication applications.
Maximum link length of 300m, offering flexibility in connectivity.
Low power dissipation for energy-efficient operation.
Operating case temperature range suitable for both commercial and industrial environments.
Operates on a single 3.3V power supply.
RoHS 6 compliant, ensuring adherence to environmental standards by being lead-free.
Copper and Fiber Basic Technician’s Kit (MS2-FTK) provides a robust set of tools to help you expertly manage your network to it keep it running smoothly-and inexpensively.
High responsivity, Low return loss,
Low dark current, Low capacitance,
Planar incident structure,
Coaxial Package, Laser wdlding , High reliability,
Application: Analog optical receiver
Optical Transmitter or date signal
CDMA, CATV
We are offering a comprehensive high speed networking solution which is including 3.2T Co-packaged Optic (CPO), 100G, 200G, 400G & 800G transceivers, DACs, AOCs, ACCs & Loopback modules. We are fulfil your research (R&D) stage product development, DVT/EVT pre-product testing, mass production and also for final application use.
Welcome to contact us for more product info.
JTOPTICS® 25GBASE SR 100m SFP28 optical transceiver, designed as a high-performance module for short-range data communication and interconnect applications, operating at 25.78125 Gbps. This module demonstrates optimal performance up to 70 m using OM3 fiber or 100 m using OM4 fiber. Tailored for multimode fiber systems, it utilizes a nominal wavelength of 850nm. With its low power consumption and high-speed capabilities, this 25G transceiver is well-suited for applications in 25G Ethernet, telecommunications, and data centers.
Key Features:
1. Hot-pluggable SFP28 form factor for convenient installation.
2. Supports a 25Gbps data rate, ensuring high-speed data transmission.
3. Maximum link length of 70m over OM3 and 100m over OM4 multimode fiber.
4. Utilizes an 850nm VCSEL laser and PIN photodetector for efficient operation.
5. Internal Clock and Data Recovery (CDR) on both Transmitter and Receiver channels for enhanced performance.
6. Equipped with a duplex LC receptacle for streamlined connectivity.
7. Operates on a single 3.3V power supply for simplified power management.
8. Power dissipation is less than 1W, contributing to energy efficiency.
9. Digital diagnostics functions are accessible via the I2C interface.
10. RoHS 6 compliant, demonstrating adherence to environmental standards.
11. Commercial case temperature range: 0°C to 70°C, suitable for various operating environments.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Bài tập - Tiếng anh 11 Global Success UNIT 1 - Bản HS.doc
1310nm sld
1. Connecting the world,Sensing the futhure
Email:info@idealphotonics.com Office:Vancouver/shanghai/Hongkong Http:www.idealphotonics.com
1310nm Superluminescent Diode
Description
SLED is a high-capability,wide spectral range,high stability,low degree of
coherence broadband light source.Single-mode or polarization maintaining
fiber output,can choose a variety types of connectors or adapters,to
facilitate rapid interconnection with external devices,and low loss.
Output optical power can be adjusted.
Feathure
8pin Butterfly Package
With Thermoelectricity Cooler (TEC)
SMF or PMF Coupling
Excellent Reliability,Used Glass
Solder Fixing Fiber
Telcordia GR-468-CORE Compliant
Application
Optical Fiber Gyroscope
Optical Fiber Sensor
Optic Passive Module Test
Specification
Parameters Symbol Min. Typ Max. Unit
Operation Current Iop - 100 mA
Optical Output Power Pf 0.3 2 mW
Center Wavelength λc 1290 1310 1330 nm
2. Connecting the world,Sensing the futhure
Email:info@idealphotonics.com Office:Vancouver/shanghai/Hongkong Http:www.idealphotonics.com
Bandwidth FWHM Bw 35 40 - nm
Spectral Ripple - 0.1 0.2 dB
Polarization Extiction
Ratio
PER - - 1.0 dB
TE ΔP - - 5 %
Operating temperature Top -45 70 ℃
Package information
Ordering information
Model
Wavelength
(nm)
Optical
devices
type
Operat.
Current
(mA) Type
Output
Power
(mW)
Operating Temp.
(₤ )
Fiber Connector
IDP-13-SLD 1310 SLD 100 0.3-1.8 -45~85₤ FC/APC