The document provides an overview of the Turkish cement industry and its use of alternative fuels and raw materials. Some key points:
- The Turkish cement industry is one of the largest in Europe and world, with 69 plants and annual production of 74 million tons in 2014.
- The Turkish Cement Manufacturers Association (TCMA) represents the industry and promotes sustainable production, including the use of alternative fuels and raw materials (AF/ARM).
- In 2014, Turkish cement plants used over 1.6 million tons of alternative fuels and materials, including waste oils, tires, refuse-derived fuel and various mineral-based wastes.
- The document discusses technical aspects of AF/ARM use such as storage
Carbon Capture and Storage in the Cement IndustryAntea Group
Heidelberg Cement presented on carbon capture and storage/ utilization as part of the recent Antea Group-sponsored EHS&S workshop for the chemical industry at the Brightlands Chemelot campus in the Netherlands.
The green benefits of cement and concrete are hidden due to the vast quantities consumed around the globe. Therefore, despite the low carbon footprint, cement and concrete are often given low marks for sustainability. The presentation attempts to set the record straight.
Carbon Capture and Storage in the Cement IndustryAntea Group
Heidelberg Cement presented on carbon capture and storage/ utilization as part of the recent Antea Group-sponsored EHS&S workshop for the chemical industry at the Brightlands Chemelot campus in the Netherlands.
The green benefits of cement and concrete are hidden due to the vast quantities consumed around the globe. Therefore, despite the low carbon footprint, cement and concrete are often given low marks for sustainability. The presentation attempts to set the record straight.
This presentation was given by Andrew Hamilton, Senior Director of BNP Paribas at the Property Seminar hosted by Slater Heelis solicitors on 8 July 2010. Andrew discussed rental performance and trends, waste to energy as a potential investment opportunity and the return of the residential investor.
This is a presentation by Eng. Demiss Alemu, Associate Professor in Thermal Engineering/Mechanical Engineering, Addis Ababa Institute of Technology at the 3rd Annual East Africa Cement, Concrete and Energy Summit
Experimental Study of Some Agro-Industrial Residues Targeted As Partial Subst...ijceronline
Cement industry belonged to the largest energy consumers’ factories in Benin. The Cement Complex of Onigbolo (CCO) had particularly undergone the disconcert effects of petroleum blaze costs of last years. This paper dealt with experimental investigations on agricultural/industrial wastes as fractional substitutes of the 7,000 L/h fuel-oil burnt in CCO-clinker furnace. Combustion of about 58 tons of five targeted agro-wastes and worn-tires, up to now ignored or forsaken in situ, even incinerated in open-air because unwieldy, made it possible saving more than 1.5 MF(CFA) in only 100-hours running. Experimental results also showed how far the cement process could contribute to towns/villages/cities cleanup (environmental problems reduction) combined with energy needs fulfillment. Among the studied agro-wastes and in expectation of adequate control and optimization of the convenient pretreatment for improving worn-tires’ combustion, results revealed that wood-sawdust was the alternate-fuel technically and economically well adapted to this tested furnace, better than cottonseeds-hulls preferred by CCO-authorities. Compatibility of the burnt wood-sawdust with cement quality characteristics, relatively high calorific value, availability and abundance throughout the year at existent sawmills, technically justified its choice. Conversely, results furthermore proved that no significant substitution rate can be reached, using only one kind agro-waste: therefore cottonseeds-hulls can be combined to sawdust
This preliminary design study was originally written by Matthew Kronborg circa 2007.
The aim was to explore the technical and economic feasibility of using hydrogen, produced via renewable energy, to power air cargo transportation and to develop an optimal pathway towards commercialisation of such a system.
I Ciclo de Conferencias “Hacia una economía circular. Oportunidades económicas en el marco de la transición energética” organizado por Funseam y Fundación Repsol.
Sesión: Oportunidades del C02 como recurso y no como residuo. 20/10/2020
Dña. Adriana Orejas, directora industrial & Deep Tech del Repsol Technology Lab
EIT Climate KIC Sustainable Production SystemsWWW.ERFC.GR
Presentation in the frame of RIS Partner Day, 13 June 2018, Brussels regarding Sustainable Production Systems.
Discover the Loop Programme - A unique global innovation platform on circular economy, eCircular Flagship, <<2° Pathway programme - A long-term transformative innovation programme that focuses on decarbonising high-emission industrial value chains, Re-Industrialise programme - An innovation and transformation programme addressing the risks industrial areas face during their transition to carbon neutrality.
QMRE have exclusive UK distribution rights for a German manufactured plastic recycling technology/ on-site product. QMRE believes that there is a compelling investment case to locate a recycling machine (P5000) with a payback of approximately 3 years on an investment of c£1.8m.
Adana Cement Industry | DuPont Safety and Sustainability Awards 2013DuPont
Adana Cement Industry, a Turkish company with production facilities across the Mediterranean region and Cyprus, has been selected as a winner for the DuPont Safety and Sustainability Awards 2013 based on its impressive achievements in improving safety performance.
This presentation was given by Andrew Hamilton, Senior Director of BNP Paribas at the Property Seminar hosted by Slater Heelis solicitors on 8 July 2010. Andrew discussed rental performance and trends, waste to energy as a potential investment opportunity and the return of the residential investor.
This is a presentation by Eng. Demiss Alemu, Associate Professor in Thermal Engineering/Mechanical Engineering, Addis Ababa Institute of Technology at the 3rd Annual East Africa Cement, Concrete and Energy Summit
Experimental Study of Some Agro-Industrial Residues Targeted As Partial Subst...ijceronline
Cement industry belonged to the largest energy consumers’ factories in Benin. The Cement Complex of Onigbolo (CCO) had particularly undergone the disconcert effects of petroleum blaze costs of last years. This paper dealt with experimental investigations on agricultural/industrial wastes as fractional substitutes of the 7,000 L/h fuel-oil burnt in CCO-clinker furnace. Combustion of about 58 tons of five targeted agro-wastes and worn-tires, up to now ignored or forsaken in situ, even incinerated in open-air because unwieldy, made it possible saving more than 1.5 MF(CFA) in only 100-hours running. Experimental results also showed how far the cement process could contribute to towns/villages/cities cleanup (environmental problems reduction) combined with energy needs fulfillment. Among the studied agro-wastes and in expectation of adequate control and optimization of the convenient pretreatment for improving worn-tires’ combustion, results revealed that wood-sawdust was the alternate-fuel technically and economically well adapted to this tested furnace, better than cottonseeds-hulls preferred by CCO-authorities. Compatibility of the burnt wood-sawdust with cement quality characteristics, relatively high calorific value, availability and abundance throughout the year at existent sawmills, technically justified its choice. Conversely, results furthermore proved that no significant substitution rate can be reached, using only one kind agro-waste: therefore cottonseeds-hulls can be combined to sawdust
This preliminary design study was originally written by Matthew Kronborg circa 2007.
The aim was to explore the technical and economic feasibility of using hydrogen, produced via renewable energy, to power air cargo transportation and to develop an optimal pathway towards commercialisation of such a system.
I Ciclo de Conferencias “Hacia una economía circular. Oportunidades económicas en el marco de la transición energética” organizado por Funseam y Fundación Repsol.
Sesión: Oportunidades del C02 como recurso y no como residuo. 20/10/2020
Dña. Adriana Orejas, directora industrial & Deep Tech del Repsol Technology Lab
EIT Climate KIC Sustainable Production SystemsWWW.ERFC.GR
Presentation in the frame of RIS Partner Day, 13 June 2018, Brussels regarding Sustainable Production Systems.
Discover the Loop Programme - A unique global innovation platform on circular economy, eCircular Flagship, <<2° Pathway programme - A long-term transformative innovation programme that focuses on decarbonising high-emission industrial value chains, Re-Industrialise programme - An innovation and transformation programme addressing the risks industrial areas face during their transition to carbon neutrality.
QMRE have exclusive UK distribution rights for a German manufactured plastic recycling technology/ on-site product. QMRE believes that there is a compelling investment case to locate a recycling machine (P5000) with a payback of approximately 3 years on an investment of c£1.8m.
Adana Cement Industry | DuPont Safety and Sustainability Awards 2013DuPont
Adana Cement Industry, a Turkish company with production facilities across the Mediterranean region and Cyprus, has been selected as a winner for the DuPont Safety and Sustainability Awards 2013 based on its impressive achievements in improving safety performance.
Sustainable Concrete: The Olympics and Beyond - Kirsten Henson, KLH Sustainab...Svenska Betongföreningen
Sustainable Concrete: The Olympics and Beyond. Presenterat av Kirsten Henson, KLH Sustainability i London, på Betongdagen den 13 oktober 2016 i Stockholm.
AGENDA
Introduction
Types of cement
Economic status
Top 5 Globally
Top 5 Nationally
SWOT
Impact
Future
Introduction
What is Cement?
Raw materials
Origin
Basic ingredient for the construction industry
In India, majority of cement produced is of blended variety, with fly ash and blast furnace slag as the mineral admixtures used for blending. Blended cements production reduces clinker production thereby leading to conservation of natural resources and energy and also substantial reduction in the CO2 generation, which is a green house gas. The production of blended cements also leads to utilization of two major industrial wastes, coming from thermal power stations and the integrated steel plants. The application of blended cement in concrete imparts better strength and durability properties to the structure. Keeping these aspects in mind, the presentation illustrates the characteristics of two varieties of blended cements, new to Indian cement industry, namely Portland Limestone Cement (PLC) and Portland High Volume fly Ash Cement (PHFC).
OMV Group Presentation - Corporate Milestones Business Segments and Resourcef...OILWIRE
OMV Group Presentation - Corporate Milestones Business Segments and Resourcefulness - 2016
Our Vision “Zero Harm – No Losses” guides our behavior, actions and decisions:
325,189 HSSE-training hours - We improve competence of all our employees on relevant HSSE matters.
146,666 Medical consultations - We focus on the health of our employees by improving working conditions, health promotion programs and medical services.
26,838 Voluntary medical checks - We develop resilience to respond and recover from incidents and ensure business continuity.
EUR 67 mn Spent on integrated pollution prevention - We support of course also preventive health measures for our employees.
EUR 36 mn Direct measures to reduce environmental impact -
We minimize our impact on the environment through pollution prevention, reduction of emissions and efficient use of energy and natural resources.
CEMEX is baed out of Mexico and is one of the top ten producers of cement in world. This presentation is study of cement industry illustrating some frameworks used in Strategy Management.
We are the global distributor of LTC technology. We supply sustainable green energy solutions. In all our projects we use LTC technology to ensure that all new facilities are cost-efficient and meet or exceed the highest environmental standards. Our objective is to supply our clients with tailor-made patented LTC technology power plant solutions that convert waste into sustainable energy. We execute all projects successfully by using the extensive experience at our disposal. Renewable Energy, Power plants without pollution, New technology power plant, LTC- Low Temperature Conversion
This PPT will give the information about what is incenaration and what is the process that will happen in the incenaration and how it is applied for civil Engineering.
Sustainability challenge of the aluminum industry: transforming wastes into p...Marcelo Suster
The work that follows is a contribution to the aluminum industry’s sustainability. It deals with the critical issue of solid wastes accruing to that sector. By-products from aluminum refining are solid wastes, liquid effluents and gaseous emissions. Each kilogram of metal produced is accompanied by three and a half kilograms of bauxite residue, commonly known as red mud. Current practice is to use decantation lagoons that are built with elaborate precautions for preventing environmental contamination. The aim of the present work is to investigate this pollutant within the perspective of current solid industrial waste technologies, and to study the practicalities for utilization and new processes. The very high ratio residue/end product provides a strong incentive insofar as the residue concerned does in fact offer numerous commercial opportunities. Thus the feasibility of converting the residue into a raw material is a real alternative to landfill disposal. Numerous industrial processes and technologies have been considered in relation to environmental legislation, industrial marketing, competitive processes and other factors. In conclusion the subject paper recommends a series of activities that would achieve transformation of red mud into valuable substances and substitute other existing raw materials without adversely affecting quality and the environment.
More than 140+ experts presented their inspiring projects and connected with over 700+ participant worldwide during this year’s online edition of the Raw Material Summit 2020 that took place on 29-30 September 2020. The innovative technologies of PLATIRUS projects and its latest project results were one of the successful presentations hosted by the project coordinator TECNALIA along with the support of the partner Monolithos Ltd. (Iakovos Yakoumis) during the EASME session H2020 – Innovation and innovators along the raw materials value chain on 30 September.
PLATIRUS consortium held a presentation sharing insights about the PLATInum group metals Recovery Using Secondary raw materials. The Platirus concept, partnership along with the technologies developed were presented by Guillermo Pozo (TECNALIA), while Iakovos Yakoumis (Monolithos Ltd) presented the incorporation of Deep-Eutectic-Solvents (DES) Leaching Technology developed in the framework of Platirus to MONOLITHOS’ integrated circular economy model for manufacturing new automotive catalysts from 100% recycled Platinum Group Metals (EIT Raw Materials CEBRA Up-Scaling Project).
The economics of industrial CCS projects at existing UK sites by 2025: Our approach, some findings and some questions - plenary presentation given by Harsh Pershad at the UKCCSRC Cardiff Biannual Meeting, 10-11 September 2014
At the Asia Clean Energy Forum 2016 Ricardo Energy & Environment’s waste management and resource efficiency experts discussed a range of critical issues, including financial, institutional, policy, regulatory, engineering, environmental and social issues around the planning for and delivery of appropriate and effective waste to energy infrastructure in developing economies.
In this presentation Phil White discusses the environmental impacts of waste treatment.
Expert workshop on the creation and uses of combined environmental and economic performance datasets at the micro-level - 10-11 July 2018 - OECD, Paris
First presented at Certas Energy's Clean Air breakfast event on 22nd May 2017, this presentation introduces a new entrant into the clean air debate - paraffinic fuels.
With improved combustion properties, these cleaner alternatives can be used in standard diesel and gas oil engines while reducing greenhouse gas emissions by up to 90%. With no investment in infrastructure, machinery or vehicles required, they could play a vital role in cleaning up Britain's industry.
Certas Energy is the first to introduce and pioneer Shell GTL Fuel (Gas-To-Liquid) in the UK, with the aim of improving air quality.
Similar to 12_M.E. Erguclu_TCMA_Bastas Baskent Cimento_Turkish cement industry recognizes alternative fuels as a key lever for its sustainability (20)
12_M.E. Erguclu_TCMA_Bastas Baskent Cimento_Turkish cement industry recognizes alternative fuels as a key lever for its sustainability
1. MVW LECHTENBERG&PARTNER
2ND ALTERNATIVE FUELS SYMPOSIUM
Mete Emre ERGÜÇLÜ
TurkishCementManufacturers Association
BaştaşBaşkentÇimentoSanayiveTicaret AŞ
15.10.2015
«Turkish Cement Industry
recognizes Alternative Fuels As A Key Lever for
its Sustainability»
PART I: GENERAL REVIEW
4. TurkishCementIndustry
• Cement Industry
o 1911 20.000 ton/year
o 2014 74,400 Mton/year
o 2014 69 Cement Plant
(50 integrated)
o In Europe 1.,
o In the World 5.
• Fınancially,
o % 77 local capital
o Share of foreigners % 23 (France,
Italy, Germany, Brazil ve Greece)
o 15.000employee
o Financial Turnover 4 Billion US-$
o Export 600 million US-$
4
5. TurkishCementManufacturers’Association
5
TCMA
Establishment 1957 – Official Representative of Industry
Place Ankara
Number of
Employee
69
Supported Articles
Production
Quality
Trainning
Environment
Technology
Contacts
(Local and abroad)
Private Sector
Government
Public
Non-Governmental Organizations
9. Use of Waste in Cement Industry
Main Purpose
Cement
Production
Additionally
Useof
Waste
Use of Wastes Insteadof
Conventional Fuels and Raw
Materials
10
• In Turkey, Cement Plants are making efforts to become a
solution partner in the Turkish Waste Management
Policies.
10. UseofWasteinTurkishCementIndustry
• Started at 2004 (AF and ARM)
Beginning
• Licensed Plants; 35/49
• Thermal Substitution Rate
• Permitted Capacity: % 40 (with co-incineration license)
• Average Thermal Substitution: % 3,71 (2014)
Existing
State
• 2004-2010 : General Regulation on Use of Alternative Fuels
(Abrogated)
• 2010 : Waste Incineration Regulation
• 2011 : Non-Hazardous Waste Regulation
• 2014 : RDF, AF and AFR Regulation
Legislations
10
11. UseofWasteinTurkishCementIndustry
• Waste Oil
• Tyres
• Refuse Derived Fuels
- Non-Hazardous
- Hazardous
• Mineral Based
Wastes
- Iron
- Aluminate
- Calcium
- Silica
Non-Hazardous Waste
By-products
Clinker
Production
Cement Production
11
Alternative Fuels Alternative Raw Materials Additives
Hazardous Non-Hazardous Non-Hazardous Hazardous
12. Turkish Cement Industry was a solution partner for waste
management activities with 1,6 mton AF and AFR.
UseofWasteinTurkishCementIndustry
Numbers of
Out of Scope
codes: 435
Numbers of waste
codes for cement
industry: 404
Determined by Ministry
AF and AFR
12
RDF
275/404
AFR
137/404
AF
247/404
Numbers of Codes: 839
13. World Data for AF - 2012
Total: ~%15
(waste+biomass)
Kaynak: http://www.wbcsdcement.org/GNR-2012/index.html
13
14. EU Data for AF (28 Countries) - 2012
Kaynak: http://www.wbcsdcement.org/GNR-2012/index.html
Total: ~%37
(waste+biomass)
14
28. Additional Costs of AF/ARM
InvestmentCosts
• Storage
• Preparation
• Feeding
• Laboratory
• Precautions for Fire
& Explosion
• HS Measurements
• Process Control
Additional Costs
• Production Loss
• Increasing Specific
Heat
• Maintenance
• Additional labor
• Emission
Measurements
COSTS
İlgili taraflar, çimento sektörünün alternatif yakıt ve Alternatif Hammadde
kullanımından kaynaklanan ilave maliyetler hakkında yeterince bilgi sahibi değildir!
28
29. Emission Measurements
29
• InstantMeasurements
o Inallstacks
o By Authorized Measurement Companies
• Continuous Measurements:
o FlueGases
o Dust
o TOC
• PeriodicalMeasurements
o Flue Gas, Dust, TOC and;
o Heavy Metals
o PCDD,PCDF andPAHs
• Online Monitoring
o From 31.12.2014
31. Acceptance Criteria and Analysis
• First Control
- Physical Control
- Sampling
- Accordance of Acceptance Criteria
• Analysis
- Calorific Value
- Chlorine
- Water Content
- Heavy Metals
- Other Parameters
• Acceptance
- Physical Control
- Analysis of Output Material 31
32. Properties of RDF
• Chemical and Physical Criteria of RDF/SRF (RDF, AF and ARM Regulation)
32
45. Belts
• Tube Belt
It reaches to 52 m height
with 300 m length
Not affected geographical
conditions (wind, rain etc.)
Carries 0,1-0,4 ton/m3
density
45
57. Criteria for ARM
57
Basic Principles;
• Must content main elements (calcium, silica, alumina and iron)
• Calorific value recommended under 2500 kcal/kg (fire
precautions)
• Must be non-hazardous (legal),
58. Frequently used ARM
58
1. Waste Roof Tiles (Clay – Al, Si)
2. Waste Marbles (Limestone – CaCO3)
3. Foundry Sans (Silica – Si)
4. Calcite Fines (Limestone – CaCO3)
5. Waste Gypsum (Natural Gypsum - CaSO4)
6. Grit (Iron – Fe2O3)
7. Waste Ceramic Tiles (Clay – Al, Si)
8. Waste Vitrification (Clay)
9. Non-Calorific Value Treatment Sludge (depends on type of wwtp
and process)
59. The Target of Cement Industry:
Increasing use of AF and ARM
Suggestions
59
60. Suggestions
60
Pretreatment of waste by waste producers
Establishing of pretreatment plants
Increasıng RDF Production by Industrial Zones
RDF Production with domestic solid waste
Increasıng use of dried sewage sludge by Municipalities
Metropolitan Municipalities - Business Models
Expectations from Metropolitan Municipalities
Expectations from Ministry of Environment
61. Pretreatment of Wastes
Increasing
use of AF
• WastesfromRDFRegulation
• Example:
- Animal Wastes
- Sewage Sludge
Pretreatment
Plants
• Establishmentof PretreatmentPlants
- Mechanical Processes (shredding, pelleting etc.)
- Drying
Cement
Plants
• Use of processed wastes as Alternative Fuels
61
62. Increasıng RDF Production by Industrial Zones
Increasing
use of AF
• Wastes of Industrial Zones
- Non-HazardousWastes
- HazardousWastes
RDF
• RDFProduction
- RDF send to Cement Plants
Cement
Plants
• Use of Alternative Fuels
62
63. RDF Production with domestic solid waste
Solid Waste
by
Municipalities
• Extremely not recommended establishment of incineration plants by
municipalities which have high investment and operation costs.
RDF Production
with MBT
Plants
• Establishment of MBT Plants nearby Municipality Landfills.
• SRF production by domestic solid wastes
• Low investment and operational cost
Cement
Plants
• Use of Alternative Fuels
63
64. Increasıng use of dried sewage sludge by
Municipalities
Wet Sewage
Sludge
• Extremely not recommended establishment of incineration plants by
municipalities which have high investment and operation costs.
Dried
Sewage
Sludge
Production
• Establishment of sewage sludge drying units in WWTP by
Municipalities
Cement
Plants
• Use of Alternative Fuels
64
65. Metropolitan Municipalities - Business Models
TechnicalSupport
andBussiness
Models
65
• Giving technical support to
Municipalities about Pretreatment and
Sewage Sludge Drying Units
• Giving support for establishment of
business models (as in Europe).
66. Expectations from Municipalities
• Instead of incineration plants which have high
investment and operational costs.
Using potential
of Cement
Industry
• hazardous and non-hazardous wastes which have
calorific value and non-hazardous wastes which
have mineral content, should not be accepted to
the landfills.
Rearrangement of
Acceptance Criteria
of Landfills
• Rearrangement of landfill fees according to
investment and operational costs.
Taking
Precautions in
Economical
Issues 69
67. Expectations from Ministry
•Establishment a system and/or economical model for polluter
pays principle because of investment/operational costs of
cement industry.
Applying
Polluter Pays
Principle
•Abolition of 40 % thermal substitutionratein WasteIncineration
Regulation (for non-hazardous wastes)
The abolition
of 40 % Limit
•Reviewing project approvals of incineration plantsReviewing Project
Approvals
•Determination of a national policy
•Adding co-incineration option to Integrated Waste
Management Plans
•Being solution partner in National Waste Management Plan
Being
Solution
Partner 79