31
REFERENCES
CertiWood Technical Centre (2011) Glue Bond Characteristics (Formaldehyde
emission). Retrieved from www.canply.org/english/literature.media/tech
glue.htm.
Kamarul Azlan Abd. Hamid (May 2008), Production of Cellulose Fiber from Oil
Palm Frond Using Steam Explosion Method. Retrieved from
http://umpir.ump.edu.my/697/1/Kamarul Azlan_Abd_Hamid.pdf.
Nemli, G. And Aydin A. (2007). Evaluation of the physical and mechanical
properties of particleboard made from the needle litter of Pinus pinaster
Ait. Industrial Crops and Products 26(3):252–8.
Mohd Sukhairi Mat Rasat, Razak Wahab, Othman Sulaiman, Janshah Moktar,
Aminuddin Mohamed, Tamer A. Tabet and Izyan Khalid (2011).
Properties of composite boards from oil palm frond agricultural waste.
BioResources 6(4), 4389-4403.
Rafidah J., Wan Asma I., Puad E., Mahanim S.M.A & Shaharuddin H (2007).
Towards Zero Waste Production of Value Added Products from Waste Oil
Palm Trunk (WOPT). Forest Research Institute Malaysia (FRIM).
Retrieved from www.bfdic.com/en/Features/Features/79.html
Unknown, November 2007. Particleboard. Retrieved from http://en.wikipedia.
org/wiki/Particleboard.
Unknown, 12 March 2012. Oil Palm. Retrieved from http://en.wikipedia.org
/wiki/Palm oil.
Uysal, B (2005). “Bonding strength and dimensional stability of laminated veneer
boards manufactured by using different adhesives,” J. Adhesion and
Adhesives 25, 395-403
Youngquist, J.A, 1987. Wood-based panels, their properties and uses. Expert
Consultation, Food and Agriculture Organization of the United Nations
116-124.

11. references

  • 1.
    31 REFERENCES CertiWood Technical Centre(2011) Glue Bond Characteristics (Formaldehyde emission). Retrieved from www.canply.org/english/literature.media/tech glue.htm. Kamarul Azlan Abd. Hamid (May 2008), Production of Cellulose Fiber from Oil Palm Frond Using Steam Explosion Method. Retrieved from http://umpir.ump.edu.my/697/1/Kamarul Azlan_Abd_Hamid.pdf. Nemli, G. And Aydin A. (2007). Evaluation of the physical and mechanical properties of particleboard made from the needle litter of Pinus pinaster Ait. Industrial Crops and Products 26(3):252–8. Mohd Sukhairi Mat Rasat, Razak Wahab, Othman Sulaiman, Janshah Moktar, Aminuddin Mohamed, Tamer A. Tabet and Izyan Khalid (2011). Properties of composite boards from oil palm frond agricultural waste. BioResources 6(4), 4389-4403. Rafidah J., Wan Asma I., Puad E., Mahanim S.M.A & Shaharuddin H (2007). Towards Zero Waste Production of Value Added Products from Waste Oil Palm Trunk (WOPT). Forest Research Institute Malaysia (FRIM). Retrieved from www.bfdic.com/en/Features/Features/79.html Unknown, November 2007. Particleboard. Retrieved from http://en.wikipedia. org/wiki/Particleboard. Unknown, 12 March 2012. Oil Palm. Retrieved from http://en.wikipedia.org /wiki/Palm oil. Uysal, B (2005). “Bonding strength and dimensional stability of laminated veneer boards manufactured by using different adhesives,” J. Adhesion and Adhesives 25, 395-403 Youngquist, J.A, 1987. Wood-based panels, their properties and uses. Expert Consultation, Food and Agriculture Organization of the United Nations 116-124.