This document contains a parts list for a structure with 13 items. It includes the item number, part number, description, length, and quantity for each part. A diagram at the bottom shows a front, side, and top view of the assembled structure.
This document provides a parts list for a SWX703AQ0 cabinet. It includes over 60 individual part numbers, descriptions, and quantities for components such as screws, hinges, bumpers, lids, bases, legs, dispensers, springs and more that make up the cabinet.
The document appears to be architectural plans and sections for renovations to a lodge. It includes floor plans showing layouts of rooms and sections cutting through the building. Dimensioned details are provided for structural elements like foundations, walls, and roofs. Text notes provide information on materials and revisions. The plans are for a suite and family room unit within a designated lodge site in Chobe National Park, Botswana.
This presentation by from the International Committee of the Red Cross describes initial alignment for transtibial prosthetic fabrication in lower limb amputee prosthetic fitting.
This document contains drawings and details for a 5' non-advertising low dome euro shelter, including:
1) Front and top views of the shelter showing structural members and dimensions.
2) Side and isometric views as well as cross sections and details of structural connections.
3) Notes specifying materials, welding standards, and quality control procedures.
This document appears to be a catalog listing various products available from a distributor. It includes listings for children's push/pull toys, ironing boards, metal containers, kitchen utensils, ceramic cookware, and tableware among other items. Each entry includes a product code, description and sometimes additional details.
This document appears to be a container survey form that lists various components, codes, potential damages, and repair codes. It includes sections for recording information about the container such as identification codes, inspection location and date, capacity, weights, and signatures. The form also includes tables to record inspection results for external and internal front and rear surfaces using ISO location codes and damage/repair codes.
This document contains codes and descriptions for components, damages, and repairs needed for flat rack containers. It lists various parts like rails, panels, hinges, locks, and frames. It then provides damage codes for bent, broken, rusted, contaminated etc parts. Finally it includes repair codes like sanding, grinding, welding, cleaning, replacing parts.
This document provides a parts list for a SWX703AQ0 cabinet. It includes over 60 individual part numbers, descriptions, and quantities for components such as screws, hinges, bumpers, lids, bases, legs, dispensers, springs and more that make up the cabinet.
The document appears to be architectural plans and sections for renovations to a lodge. It includes floor plans showing layouts of rooms and sections cutting through the building. Dimensioned details are provided for structural elements like foundations, walls, and roofs. Text notes provide information on materials and revisions. The plans are for a suite and family room unit within a designated lodge site in Chobe National Park, Botswana.
This presentation by from the International Committee of the Red Cross describes initial alignment for transtibial prosthetic fabrication in lower limb amputee prosthetic fitting.
This document contains drawings and details for a 5' non-advertising low dome euro shelter, including:
1) Front and top views of the shelter showing structural members and dimensions.
2) Side and isometric views as well as cross sections and details of structural connections.
3) Notes specifying materials, welding standards, and quality control procedures.
This document appears to be a catalog listing various products available from a distributor. It includes listings for children's push/pull toys, ironing boards, metal containers, kitchen utensils, ceramic cookware, and tableware among other items. Each entry includes a product code, description and sometimes additional details.
This document appears to be a container survey form that lists various components, codes, potential damages, and repair codes. It includes sections for recording information about the container such as identification codes, inspection location and date, capacity, weights, and signatures. The form also includes tables to record inspection results for external and internal front and rear surfaces using ISO location codes and damage/repair codes.
This document contains codes and descriptions for components, damages, and repairs needed for flat rack containers. It lists various parts like rails, panels, hinges, locks, and frames. It then provides damage codes for bent, broken, rusted, contaminated etc parts. Finally it includes repair codes like sanding, grinding, welding, cleaning, replacing parts.
This document discusses different types of precision measuring tools like tape measures, steel rulers, and their graduations. It explains that tape measures are marked in feet and inches while steel rulers have graduations in fractions of an inch down to 1/64th or smaller. Steel rulers have two sides, with one side graduated in 32nds or 64ths of an inch, and the other side graduated in smaller increments like 100ths or 20ths of an inch to allow for more precise measurements. The document provides examples of how to use these tools to take measurements in fractions of an inch.
The document lists various parts used in semiconductor manufacturing processes including etch, thin film deposition, and testing. It describes the parts, their markets in semiconductor, LCD, or OLED industries, and sometimes remarks. Some of the parts listed are an upper electrode, gas distribution components, a cover, a chuck strip, shower heads, a blocker plate, a water box, a ring connector, an RF strap, an HHP oven cover, a screen, a gas mixer, nozzles, studs, PEEK products, wafer guides, manifolds, RPS parts, guides, and lift pins.
Daewoo doosan mt36 moxy articulated dump truck parts catalogue manualfjjskeknjufksemm
This document contains parts lists and diagrams for various engine components of an MT36/41 engine with serial numbers 810001-810108. It includes lists and diagrams for the cylinder head, rocker cover, cylinder block, flywheel housing, oil sump, front casing, crankcase ventilation, crank mechanism, piston, timing gear, and oil pump. The parts are identified by key number, part number, description, and quantity.
Daewoo doosan mega 200 tc v wheeled loader parts catalogue manualfjjskeknjufksemm
This document provides a list of parts for various components of an engine and frame. It includes the part numbers, descriptions, quantities, serial number ranges and whether parts are replaceable for key components like the frame, engine mounting, air cleaner, and oil tank for serial numbers 1001-1010.
The document contains a list of component codes and damage codes related to repairing parts of a shipping container. It then provides a container survey form template to record inspection details including the component inspected, type of damage, repair codes, and location on the container. The template includes codes for sides, doors, and undercarriage of the container.
This document contains a list of component codes and damage codes for repairing various parts of a shipping container. It includes codes for rails, panels, corner posts, hinges, locks, handles, gaskets, floors, and more. Common damage types are listed like bent, broken, cracked, corroded. The document also includes codes for location of the damage, like left, right, top, bottom and codes for repair work needed like sanding, grinding, welding, cleaning and replacing parts.
Daewoo doosan dx160 lc 3 crawler excavator parts catalogue manualfjjskekskem
This document contains parts lists and diagrams for components of a DX160LC-3 engine. It includes 11 figures listing over 150 individual parts that make up the cylinder block, timing gear case, flywheel housing, oil seal, oil spray nozzle, breather system, crankshaft, vibration damper, flywheel, connecting rod, and piston. Each part is identified by a unique key number, part number, description, and quantity.
The document contains diagrams and part lists for components of an engine. It includes diagrams and lists of parts for the cylinder block, timing gear case, flywheel housing, oil seal, oil spray nozzle, breather system, crankshaft, vibration damper, flywheel, connecting rod, piston, and crank shaft pulley. Each diagram shows the parts that make up that component and includes the part numbers, descriptions, and quantities of each sub-part.
This document contains codes and information for documenting damage, repairs, and inspections of shipping containers and their components. It includes codes for components, damage types, repair methods, and location on the container. Sections, repair codes, and a container survey form are provided for recording inspection results.
Natron Equipment & Spares Pvt. Ltd. that has been in business of DRAUGHT BEER EQUIPMENT /TOWERS/ACCESSORIES, SOFT DRINK EQUIPMENT, TOWER’S ACCESSORIES, COFFEE MACHINE PARTS, WATER PURIFICATION SYSTEMS & PARTS (DOMESTIC) as well as other solution related to a.m. segments.
Daewoo doosan mt40 b moxy articulated dump truck parts catalogue manualfjjskeknjufksemm
This document contains parts lists and diagrams for various components of a MT40B engine with serial numbers 513001-513140. It includes lists and diagrams for the cylinder head, rocker cover, cylinder block, timing gear housing, flywheel housing, oil sump, crankcase ventilation, and crank mechanism. Each component list includes part numbers, descriptions, quantities, and whether parts are replaceable. Diagrams provide visuals and callouts for the components.
This document provides details for the construction of slab culverts and box culverts, including layout plans, sections, reinforcement details and notes. It includes information on typical abutment and headwall layouts, culvert dimensions, rebar specifications, concrete grades, embedment and protection. Reinforcement schedules are provided for slab and box culvert sections of varying sizes, as well as headwalls, wingwalls and parapets. Construction notes specify requirements for dimensions, materials, cover thickness and refer to other related drawings.
This document contains codes for various components, assemblies, and areas of containers and reefers that may need repair. It lists component names and provides codes for components, locations on the container, damage types, and repair actions. It also includes codes for reefer unit components and their locations.
06 hydraulic workover unit trisakti 25 nov 2007yudi05
This document discusses hydraulic workover units (HWO units) used for well maintenance. It provides information on:
- What an HWO unit is and its history of development since 1929
- The uses of HWO units, which include pulling/running completions, fishing, cementing, and more
- The types of HWO units - short stroke and long stroke
- Specifications for short stroke and long stroke units including maximum lift/snubbing forces, stroke length, and torque ratings
- Benefits of using HWO units such as versatility of use onshore/offshore, ease of transportation, ability to pull and push, and reduced costs
- Components of an HWO unit including j
The CEEM AHWUs (HWO), 460K, 235K, are designed to be rigged up as a stand-alone unit. It is to be used for the work over the existing wells Offshore and Land based. The rig is designed to complete all work-over functions completed by a conventional rig with the additional capability of working with pressure in snubbing and under-balanced situations.
Visit our website: www.ceemfze.ae for more information
رضا مصطفوی طباطبایی Reza Mostafavi Tabatabaei, HWO, Hydraulic Work over SolutionReza Mostafavi Tabatabaei
Hydraulic workover (HWO) involves running and pulling tubulars into wells under pressure using a hydraulic workover unit. HWO has been used since the 1920s and offers benefits like keeping wells producing during work by avoiding killing the well. A HWO unit consists of a work basket, hydraulic jack, slips, rotary table, and other components to move tubulars into the well while maintaining well control. HWO can be used for various applications like routine or emergency well work as a cost-effective alternative to wireline or coiled tubing.
The course focuses on the practical applications of various techniques and methodologies in well completion --- from the selection of completion type, perforating strategies, fluid selection, and installation of production heads.
certificate hydraulic work over
certificate in hydraulic work over I and II EditRe-order
Landmark Learning Central, License bbqqr56
June 2010 – Present
The document discusses procedures for BOP testing and kick tolerance calculations. It provides details on general BOP testing steps including using water, ensuring personnel safety, and pressure testing all equipment. It also covers kick tolerance concepts like calculating the maximum gas volume that can be circulated out of the wellbore without exceeding the weakest formation pressure. An example calculation is provided to determine a well's kick tolerance volume.
This document summarizes a presentation on observations and trends in BOP maintenance, reliability, and compliance. The presentation covers innovations in drilling technology over the last five years, an increase in reported BOP failures after the Macondo disaster, case studies on maintenance program effectiveness and experience gaps. It also discusses opportunities to improve BOP maintenance through better data collection and standardization, and changes in regulatory standards for BOP equipment.
رضا مصطفوی طباطبایی WELL SERVICE EQUIPMENT MECHANICAL TECHNICAL ENGINEERING 2015Reza Mostafavi Tabatabaei
The document describes equipment for well abandonment operations, including a dual level work platform system that can accommodate various service equipment like casing jacks, trolley systems, power swivels, saws, and tongs. It provides details on specific components of the system like the PS120 swivel, power tong adapter, saw adapter, casing jacks, and more. The purpose of the system is to provide an integrated solution for well abandonment tasks like removing grouted casing, cutting casing, and handling tubulars.
This document provides an introduction to hydraulic workover and snubbing solutions. It discusses the history of hydraulic workover which has been used since the 1920s. It defines snubbing as running and pulling tubulars with surface pressure present. Engineering calculations are required for hydraulic workover applications to determine the required snubbing force and hydraulic pressure based on factors like well pressure, tubular size, and length. Proper procedures must be followed when running tubulars between blowout preventer rams.
This document discusses different types of precision measuring tools like tape measures, steel rulers, and their graduations. It explains that tape measures are marked in feet and inches while steel rulers have graduations in fractions of an inch down to 1/64th or smaller. Steel rulers have two sides, with one side graduated in 32nds or 64ths of an inch, and the other side graduated in smaller increments like 100ths or 20ths of an inch to allow for more precise measurements. The document provides examples of how to use these tools to take measurements in fractions of an inch.
The document lists various parts used in semiconductor manufacturing processes including etch, thin film deposition, and testing. It describes the parts, their markets in semiconductor, LCD, or OLED industries, and sometimes remarks. Some of the parts listed are an upper electrode, gas distribution components, a cover, a chuck strip, shower heads, a blocker plate, a water box, a ring connector, an RF strap, an HHP oven cover, a screen, a gas mixer, nozzles, studs, PEEK products, wafer guides, manifolds, RPS parts, guides, and lift pins.
Daewoo doosan mt36 moxy articulated dump truck parts catalogue manualfjjskeknjufksemm
This document contains parts lists and diagrams for various engine components of an MT36/41 engine with serial numbers 810001-810108. It includes lists and diagrams for the cylinder head, rocker cover, cylinder block, flywheel housing, oil sump, front casing, crankcase ventilation, crank mechanism, piston, timing gear, and oil pump. The parts are identified by key number, part number, description, and quantity.
Daewoo doosan mega 200 tc v wheeled loader parts catalogue manualfjjskeknjufksemm
This document provides a list of parts for various components of an engine and frame. It includes the part numbers, descriptions, quantities, serial number ranges and whether parts are replaceable for key components like the frame, engine mounting, air cleaner, and oil tank for serial numbers 1001-1010.
The document contains a list of component codes and damage codes related to repairing parts of a shipping container. It then provides a container survey form template to record inspection details including the component inspected, type of damage, repair codes, and location on the container. The template includes codes for sides, doors, and undercarriage of the container.
This document contains a list of component codes and damage codes for repairing various parts of a shipping container. It includes codes for rails, panels, corner posts, hinges, locks, handles, gaskets, floors, and more. Common damage types are listed like bent, broken, cracked, corroded. The document also includes codes for location of the damage, like left, right, top, bottom and codes for repair work needed like sanding, grinding, welding, cleaning and replacing parts.
Daewoo doosan dx160 lc 3 crawler excavator parts catalogue manualfjjskekskem
This document contains parts lists and diagrams for components of a DX160LC-3 engine. It includes 11 figures listing over 150 individual parts that make up the cylinder block, timing gear case, flywheel housing, oil seal, oil spray nozzle, breather system, crankshaft, vibration damper, flywheel, connecting rod, and piston. Each part is identified by a unique key number, part number, description, and quantity.
The document contains diagrams and part lists for components of an engine. It includes diagrams and lists of parts for the cylinder block, timing gear case, flywheel housing, oil seal, oil spray nozzle, breather system, crankshaft, vibration damper, flywheel, connecting rod, piston, and crank shaft pulley. Each diagram shows the parts that make up that component and includes the part numbers, descriptions, and quantities of each sub-part.
This document contains codes and information for documenting damage, repairs, and inspections of shipping containers and their components. It includes codes for components, damage types, repair methods, and location on the container. Sections, repair codes, and a container survey form are provided for recording inspection results.
Natron Equipment & Spares Pvt. Ltd. that has been in business of DRAUGHT BEER EQUIPMENT /TOWERS/ACCESSORIES, SOFT DRINK EQUIPMENT, TOWER’S ACCESSORIES, COFFEE MACHINE PARTS, WATER PURIFICATION SYSTEMS & PARTS (DOMESTIC) as well as other solution related to a.m. segments.
Daewoo doosan mt40 b moxy articulated dump truck parts catalogue manualfjjskeknjufksemm
This document contains parts lists and diagrams for various components of a MT40B engine with serial numbers 513001-513140. It includes lists and diagrams for the cylinder head, rocker cover, cylinder block, timing gear housing, flywheel housing, oil sump, crankcase ventilation, and crank mechanism. Each component list includes part numbers, descriptions, quantities, and whether parts are replaceable. Diagrams provide visuals and callouts for the components.
This document provides details for the construction of slab culverts and box culverts, including layout plans, sections, reinforcement details and notes. It includes information on typical abutment and headwall layouts, culvert dimensions, rebar specifications, concrete grades, embedment and protection. Reinforcement schedules are provided for slab and box culvert sections of varying sizes, as well as headwalls, wingwalls and parapets. Construction notes specify requirements for dimensions, materials, cover thickness and refer to other related drawings.
This document contains codes for various components, assemblies, and areas of containers and reefers that may need repair. It lists component names and provides codes for components, locations on the container, damage types, and repair actions. It also includes codes for reefer unit components and their locations.
06 hydraulic workover unit trisakti 25 nov 2007yudi05
This document discusses hydraulic workover units (HWO units) used for well maintenance. It provides information on:
- What an HWO unit is and its history of development since 1929
- The uses of HWO units, which include pulling/running completions, fishing, cementing, and more
- The types of HWO units - short stroke and long stroke
- Specifications for short stroke and long stroke units including maximum lift/snubbing forces, stroke length, and torque ratings
- Benefits of using HWO units such as versatility of use onshore/offshore, ease of transportation, ability to pull and push, and reduced costs
- Components of an HWO unit including j
The CEEM AHWUs (HWO), 460K, 235K, are designed to be rigged up as a stand-alone unit. It is to be used for the work over the existing wells Offshore and Land based. The rig is designed to complete all work-over functions completed by a conventional rig with the additional capability of working with pressure in snubbing and under-balanced situations.
Visit our website: www.ceemfze.ae for more information
رضا مصطفوی طباطبایی Reza Mostafavi Tabatabaei, HWO, Hydraulic Work over SolutionReza Mostafavi Tabatabaei
Hydraulic workover (HWO) involves running and pulling tubulars into wells under pressure using a hydraulic workover unit. HWO has been used since the 1920s and offers benefits like keeping wells producing during work by avoiding killing the well. A HWO unit consists of a work basket, hydraulic jack, slips, rotary table, and other components to move tubulars into the well while maintaining well control. HWO can be used for various applications like routine or emergency well work as a cost-effective alternative to wireline or coiled tubing.
The course focuses on the practical applications of various techniques and methodologies in well completion --- from the selection of completion type, perforating strategies, fluid selection, and installation of production heads.
certificate hydraulic work over
certificate in hydraulic work over I and II EditRe-order
Landmark Learning Central, License bbqqr56
June 2010 – Present
The document discusses procedures for BOP testing and kick tolerance calculations. It provides details on general BOP testing steps including using water, ensuring personnel safety, and pressure testing all equipment. It also covers kick tolerance concepts like calculating the maximum gas volume that can be circulated out of the wellbore without exceeding the weakest formation pressure. An example calculation is provided to determine a well's kick tolerance volume.
This document summarizes a presentation on observations and trends in BOP maintenance, reliability, and compliance. The presentation covers innovations in drilling technology over the last five years, an increase in reported BOP failures after the Macondo disaster, case studies on maintenance program effectiveness and experience gaps. It also discusses opportunities to improve BOP maintenance through better data collection and standardization, and changes in regulatory standards for BOP equipment.
رضا مصطفوی طباطبایی WELL SERVICE EQUIPMENT MECHANICAL TECHNICAL ENGINEERING 2015Reza Mostafavi Tabatabaei
The document describes equipment for well abandonment operations, including a dual level work platform system that can accommodate various service equipment like casing jacks, trolley systems, power swivels, saws, and tongs. It provides details on specific components of the system like the PS120 swivel, power tong adapter, saw adapter, casing jacks, and more. The purpose of the system is to provide an integrated solution for well abandonment tasks like removing grouted casing, cutting casing, and handling tubulars.
This document provides an introduction to hydraulic workover and snubbing solutions. It discusses the history of hydraulic workover which has been used since the 1920s. It defines snubbing as running and pulling tubulars with surface pressure present. Engineering calculations are required for hydraulic workover applications to determine the required snubbing force and hydraulic pressure based on factors like well pressure, tubular size, and length. Proper procedures must be followed when running tubulars between blowout preventer rams.
This document contains drawings and specifications for a water vessel. It includes:
- Dimensions and views of the vessel from multiple angles.
- A bill of materials listing 18 items including pipes, plates, bolts, and other components made of stainless steel.
- Notes providing requirements for welding, cleaning, edge radii, load support, weights, and capacity.
- A service connections table identifying inlet, outlet, vent, and access points by location and pipe size.
- Details for couplings, flanges, and nozzles calling out dimensions.
This document is a track chart for the BNSF Railway line between Shelby, MT and Sweet Grass, MT (MP 101.4 to MP 138.9). It provides details on the track such as mileposts, curves, grades, structures (culverts, bridges, etc.), signals and speed limits. Users are directed to submit any corrections or changes to the Engineering department at BNSF.
Kuhn compacmaster fixed chamber baler with integrated wrapperPartCatalogs Net
This document contains a parts list for the lower chamber section of a compactor machine. It lists 17 parts needed including spacers, washers, bolts, screws, nuts, bearings, plates, and locks. Quantities and part numbers are provided for each component.
New holland mh2.6 midi wheel excavator parts catalogue manualfjskefkksemm
This document is a parts catalog containing information about engine, suspension, air cleaner, muffler, and radiator parts for a MH2.6 product line. It includes the part number, description, and quantity of various supports, screws, nuts, washers, filters, hoses, manifolds, and other components. The parts are organized into sections for different systems and include both exploded diagrams and lists of the individual parts.
New holland mh2.6 midi wheel excavator parts catalogue manual instant downloadudfujsjkkksemm
This document is a parts catalog containing information about engine, suspension, air cleaner, muffler, and radiator parts for a MH2.6 product line. It includes the part number, description, and quantity of various supports, screws, nuts, washers, filters, hoses, manifolds, and other components. The parts are organized into sections for different systems and include both exploded diagrams and lists of the individual parts.
New holland mh2.6 midi wheel excavator parts catalogue manualfjjskefkskem
This document is a parts catalog containing information about engine, suspension, air cleaner, muffler, and radiator parts for a MH2.6 product line. It includes the part number, description, and quantity of various supports, screws, nuts, washers, filters, hoses, manifolds, and other components. The parts are organized into sections for different systems and include both exploded diagrams and lists of the individual parts.
Iranian art has one of the deepest art heritages and it embodies many disciplines from architecture to music. The Iranian art world has been crafted by modern and contemporary elements that make it’s cultural community a very unique collaboration.
Oil and gas are hugely valuable resources that power not only our cars, cities, and homes, but major economies around the world. This presentation discusses the mechanics of the oil drill, used to extract oil and natural gases from beneath the earth’s crust.
One factor that has bolstered China’s influence in the global energy market is its emergence as a major player in manufacturing and exporting low-cost, high quality drilling equipment.
رضا مصطفوی طباطبایی 8 Reza Mostafavi Tabatabaei طباطبایی يك كارآفرين ،سرمايه گذار و تاجر در زمينه صنعت نفت و گاز بوده و در حال حاضر مدير عامل شركت نفت و گاز مستقر در دبي ميباشد .فعاليت هاي اصلی اين شركت شامل ارائه خدمات مهندسي مرتبط به عمليات حفاري در خشكي و دريا ميباشد.
رضا مصطفوی طباطبایی یک فرد انسان دوست ، کار آفرین و تاجر بین المللی است . وی همواره این شعر شاعر بزرگ ایران زمین سعدی را سر لوحه فعالیتهای اقتصادی و اجتماعي خود قرار داده است.
رضا مصطفوی طباطبایی Reza Mostafavi Tabatabaei posing for a photo wearing a yellow tie.رضا مصطفوی طباطبایی یک فرد انسان دوست ، کار آفرین و تاجر بین المللی است . وی همواره این شعر شاعر بزرگ ایران زمین سعدی را سر لوحه فعالیتهای اقتصادی و اجتماعي خود قرار داده است.
The document describes equipment and systems for well abandonment operations, including:
- A dual level work platform that houses integrated systems like 300 ton casing jacks, a PS120 power swivel, diamond wire saw, and dual equipment trolleys.
- Adapters that allow the work platform to mount directly to casing head housings or W-beams.
- Casing cutting systems like diamond wire saws and band saws that are positioned safely using trolleys.
- 300 and 500 ton casing jacks with removable bushings for pulling casing from wells.
Hydraulic workover (HWO) involves running and pulling tubulars into wells under pressure using a hydraulic workover unit. HWO has been used since the 1920s and offers benefits like keeping wells producing during work by avoiding killing the well. A HWO unit consists of a work basket, hydraulic jack, slips, rotary table, and other components to move tubulars into the well while maintaining well control. HWO can be used for various applications like routine or emergency well work as a cost-effective alternative to wireline or coiled tubing.
Hydraulic workover involves running and pulling tubulars into wells with surface pressure present using a hydraulic workover unit. The unit consists of a basket, hydraulic jack assembly with traveling and stationary slips, rotary table, guide tubes, and other components. The jack assembly is used to move the tubulars into and out of the well while maintaining pressure control. Primary pressure control is provided by a stripper assembly and blowout preventers above the wellhead.
از افراد موفقی که وی سیاستهای آنها را سر لوحه فعالیتهای افتصادی و اجتماعی خویش قرار داده است می توان به بیل گیتز موسس شرکت ماکروسافت ، وارن بافت موفق ترین سرمایه گذار قرن بیستم و موسس شرکت سرمایه گذاری برکشیر، چانگ جو یانگ موسس شرکت هیوندا، وریچارد برانسون موسس گروه امریکن ویرجین اشاره کرد.
رضا مصطفوی طباطبایی يك كارآفرين ،سرمايه گذار و تاجر در زمينه صنعت نفت و گاز بوده و در حال حاضر مدير عامل شركت نفت و گاز مستقر در دبي ميباشد .فعاليت هاي اصلی اين شركت شامل ارائه خدمات مهندسي مرتبط به عمليات حفاري در خشكي و دريا ميباشد.
رضا مصطفوی طباطبایی یک فرد انسان دوست ، کار آفرین و تاجر بین المللی است . وی همواره این شعر شاعر بزرگ ایران زمین سعدی را سر لوحه فعالیتهای اقتصادی و اجتماعي خود قرار داده است.
This document provides an introduction to hydraulic workover and snubbing solutions. It discusses the history of hydraulic workover which has been used since the 1920s. It defines snubbing as running and pulling tubulars with surface pressure present. It outlines the benefits of hydraulic workover such as remaining in production and completing work without killing the well. It also describes potential applications like fishing, drilling, completions, and abandonment. Finally, it explains the mechanics of hydraulic workovers including the use of traveling and stationary slips to move tubulars through blowout preventer rams.
This document provides 21 quotes to inspire business owners and employees. It focuses on creating a positive workplace where employees feel supported and motivated. Quotes offer wisdom on leadership, teamwork, challenges, and success from well-known entrepreneurs and leaders.
The document provides 40 tips for scaling up start-ups organized under the following categories: hiring practices, company culture, leadership, marketing, finances, and habits for success. Some key recommendations include hiring fewer but higher paid employees, regularly getting market feedback from clients, having daily cash reports, and targeting a minimum 30% return on assets for mid-sized businesses. The overall advice emphasizes the importance of strategic hiring, strong company culture, hands-on leadership, continuous learning, and financial discipline.
This document outlines a discussion on the state of demand-driven supply chains. It begins with introductions from Lora Cecere and Carol Ptak. The discussion will cover how supply chains have evolved from consumer-driven to demand-driven networks. It will also examine barriers to progress and the current state of affairs. Panelists will discuss definitions of demand-driven, reasons for lack of success, and interventions needed to advance the field. They will consider improving integration across planning, production, and delivery. The goal is to spark thought on achieving breakthrough demand-driven supply chain performance.
ACEP Magazine edition 4th launched on 05.06.2024Rahul
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, Serbia
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
International Conference on NLP, Artificial Intelligence, Machine Learning an...gerogepatton
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.