This document contains drawings and specifications for a water vessel. It includes: - Dimensions and views of the vessel from multiple angles. - A bill of materials listing 18 items including pipes, plates, bolts, and other components made of stainless steel. - Notes providing requirements for welding, cleaning, edge radii, load support, weights, and capacity. - A service connections table identifying inlet, outlet, vent, and access points by location and pipe size. - Details for couplings, flanges, and nozzles calling out dimensions.

1. 16.750
4.500
8.030
5.000
8.000
1.750
20.000
1.500
11.000
2.500
8.000
FULL PEN.
FULL PEN.
22.500
11.000 11.438
R0.500
TOP VIEW SCALE 1:8
FRONT VIEW SCALE 1:8
1.000
0.875
1.000 TYP.
SPACED ON 13.000" BCD.
BILL OF MATERIALS
ITEM QTY. DESCRIPTION MATERIAL
1 1 0.188" THICK ROLLED PLATE SHELL SA-240 304
2 1 2" HEAVY FERRULE- ANDRON STAINLESS SA-479 304
3 1 2" SCH. 40 PIPE SA-312 TP304
4 1 2" B16.9 300# RFSO FLANGE SA-182 F304
5 1 8" FERRULE- ADVANCED COUPLINGS SA-312 TP304
6 1 0.188" ROLLED PLATE CONE SA-240 304
7 1 10" SCH. 40 PIPE SA-312 TP304
8 1 FLANGE- 14.75"ODX10.75"IDX11.00" THICK SA-240 304
9 6 0.75" BOLTS SA-193 B8 CLASS 1
10 6 0.75" HEX NUT SA-194 CLASS B8
11 6 0.75" OD PIN SA-193 B8 CLASS 1
12 1 2" 3000# HALF COUPLING SA-182 F304
13 1 COVER- 1" THICK SA-240 304
14 1 TAPERED SHELL FROM 12" SCH. 80 PIPE SA-315 TP304
15 12 SWING BOLT LUGS- 1.0"X2.5"X2.0" SA-240 304
16 1 0.188" PLATE SA-240 304
17 1 NAME PLATE SS
18 1 PARKER O-RING #381 (3/16") VMQ
NOTES:
1. ALL WELDS SHALL BE NEAT IN APPEARANCE, FREE OF
SLAG AND OTHER DEFECTS.
2. VESSEL TO BE CLEANED OF SCALE, OIL, WELD
SPATTER AND ALL FOREIGN MATERIAL PRIOR TO
HYDROSTATIC TEST.
3. REMOVE ALL SHARP EDGES ON NOZZLES (1/8" MIN.
RADIUS).
4. ALL NOZZLES TO SUPPORT NOMINAL LOADS ONLY.
5. VESSEL WEIGHT (APPROX. DRY) 160lbs.
VESSEL WEIGHT (APPROX. TEST) 275lbs.
6. CAPACITY 1.85 CU. FT.
7. FLUID: WATER
*A
*B
1
15
13
12
9
16
6
5
14
1011
17
A
D
CB
E F
2
43
CAB
SERVICE CONNECTIONS
MARK SERVICE DESCRIPTION LOCATION
A INLET 2" RFSO 300# FLANGE CONE
B INSPECTION 2" HEAVY BUTT-WELD FERRULE SHELL
C INLET 10" CUSTOM FLANGE SHELL
D OUTLET 8" FERRULE BOTTOM CONE
E VENT 2" 3000# HALF COUPLING TOP COVER
F ACCESS 12" SWING BOLT FLANGE TOP COVER
LOCATION NPS CLASS HOLE F1 LOCATION t NPS nt NOZZLE NPS CLASS LEG 41 SB LEG 42LEG 41
E 2" 3000 2.375" 0.25" A 0.188" A 300 0.25" 0.154"
B C (NO HUB) CUSTOM 0.365"
C
0.188"
0.188"
0.188"0.154"
0.161"
0.365"
0.188"
0.188"
0.25"
2"
2"
10"
2"
10" 0.5"
OUTSIDE
F1
DETAIL C SCALE 1:5 UW-16.2 L COUPLING
HOLE
0.25"
INSIDE VESSEL
LEG 42
DETAIL E SCALE 1:2.5 SLIP ON FLANGE (A)
LEG 41
DETAIL D SCALE 1:1 UW-16.1 (C)
SB nt
5.000
RIGHT SIDE SCALE 1:8 SECTION A-A SCALE 1:8
C
D
E
LEG 41
t
INSIDE
OUTSIDE
nt
FULL PEN.
A
A
* SEE SHEET 2 FOR DETAILS
A,B
ISOMETRIC VIEW SCALE 1:8
FULL PEN.