This document provides specifications for explosion proof lighting fixtures for use in hazardous areas. The fixtures, called EVAC, are approved for Zone 1, 2, 21, 22 installations and have an IP66 protection degree. They have an aluminum body and glass globe, are painted gray, and have stainless steel screws. Electrical characteristics include power supply of 220-240V, 50/60Hz and cable entry of 3/4" NPT. Various mounting options and accessories are also listed.

1. LIGHTING FIXTURES FOR
FLUORESCENT TUBE LAMPS
Explosion Proof Electrical Equipment
EVF
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
LIGHTING FIXTURES
ATEX 94/9/EC
GOST-R (RTR / RTN)
GOST-K
1Ex d IIC T5/T4
DIP A21 TA (100…135)°C
1Ex d IIC T5/T4
DIP A21 TA (100…135)°C
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
IP66
IP66
IP66
ISSEP 02 ATEX 043
POCC IT. ГБ05.B02536
No. 07/43-269
EN 60079-0; EN 60079-1; EN 61241-1
ГОСТ Р 51330.9-99 (МЭК 60079-10-95)
ГОСТ Р 51330.13-99 (МЭК 60079-14-96)
ГОСТ Р МЭК 61241-3-99
ГОСТ Р 51330.0 / 1 / 8 / 14-99
ГОСТ Р МЭК 61241-1-1-2002
II 2 G Ex d IIC T5/T4
II 2 D Ex tD A21 T100°C / T135°C
EXECUTION
installation
PROTECTION DEGREE
CERTIFICATE REF.
RULES OF COMPLIANCE
EMERGENCY UNIT
ATEX 94/9/EC
GOST-R (RTR / RTN)
GOST-K
1Ex d IIC T6
DIP A21 TA T85°C
1Ex d IIC T6
DIP A21 TA T85°C
ZONA 1 / 2 - ZONA 21 / 22
ZONA 1 / 2 - ZONA 21 / 22
ZONA 1 / 2 - ZONA 21 / 22
IP66
IP66
IP66
INERIS 08 ATEX 018
POCC IT. ГБ05.B02537
No. 07/43-269
EN 60079-0; EN 60079-1;
EN 61241-0; EN 61241-1;
ГОСТ Р 51330.9-99 (МЭК 60079-10-95)
ГОСТ Р 51330.13-99 (МЭК 60079-14-96)
ГОСТ Р МЭК 61241-3-99
ГОСТ Р 51330.0 / 1 / 8 / 14-99
ГОСТ Р МЭК 61241-1-1-2002
II 2 G Ex d IIC T6
II 2 D Ex d tD A21 T85°C
EXECUTION
installation
PROTECTION DEGREE
CERTIFICATE REF.
RULES OF COMPLIANCE
Mechanical characteristics
Body
marine grade copper free aluminium (control gear & emergency unit)
Tubes
high-temperature resistant borosylicate glass tube
painting
external epoxy powders grey ral-9006 colour
screws
external stainless steel
gaskets
nbr rubber
reflectors
white stove enamelled sheet steel
cable entry
3/4” npt size threaded
Electrical characteristics
power supply
elettronic ballast 220v/240v - 50/60hz (p.f.corrected - cos ρ ≥ 0,98)
lampholders
bi-pin g13 cap
internal wiring
high-temperature resistant silicon rubber insulation cables
emergency unit
emergency unit composed of inverter charger and ni-cd battery pack 4A/h 6v. autonomy from 60 to 120min.
Led power-on indicating lamp provided
On Request Accessories:
• Pole mounting kit complete with stainless steel hardware
• Ceiling mounting kit complete with stainless steel hardware
• Pendant mounting kit complete with stainless steel hardware
• Wall/Structure mounting kit complete with stainless steel hardware
• Galvanized steel wire protection guard
• Stainless steel wire protection guard
• Stainless steel reflectors
• External painting colour on request
• Electronic ballast with voltage supply different than standard
• Ni-Cd Battery pack 7A/h 6V for Emergency Unit with Autonomy more than 150min
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 1
EVF
Ex Lighting

2. Ex Lighting
EVF Technical data
TEMPERATURE CLASS
(GAS)
LAMP
EVF
CODE
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
CABLE ENTRY
EMERGENCY
UNIT
AUTONOMY
DETAIL
FLUORESCENT LIGHTING FIXTURES FOR SINGLE AND TWIN LAMPS - POWER SUPPLY 220V/240V - 50/60Hz
T5
T4
T 100°C
T 135°C
G13
2 x 3/4”
-
-
A
T5
T4
T 100°C
T 135°C
G13
2 x 3/4”
-
-
A
T5
T4
T 100°C
T 135°C
G13
2 x 3/4”
-
-
A
T5
T4
T 100°C
T 135°C
G13
2 x 3/4”
-
-
B
T5
T4
T 100°C
T 135°C
G13
2 x 3/4”
-
-
B
T5
T4
T 100°C
T 135°C
G13
2 x 3/4”
-
-
B
EVF18EL
1 x 18W
EVF36EL
1 x 36W
EVF58EL
1 x 58W
EVF18BEL
2 x 18W
EVF36BEL
2 x 36W
EVF58BEL
2 x 58W
EMERGENCY FLUORESCENT LIGHTING FIXTURES FOR SINGLE AND TWIN LAMPS - POWER SUPPLY 220V/240V - 50/60Hz
T5
T4
T 100°C
G13
T 135°C
1 x 3/4”
4.8 V 1 x 1/2” 4Ah
2h
C
T5
T4
T 100°C
G13
T 135°C
1 x 3/4”
1 x 1/2”
4.8 V - 4Ah
2h
C
T5
T4
T 100°C
G13
T 135°C
1 x 3/4”
1 x 1/2”
4.8 V - 4Ah
2h
C
T5
T4
T 100°C
G13
T 135°C
1 x 3/4”
1 x 1/2”
4.8 V - 4Ah
2h
D
T5
T4
T 100°C
G13
T 135°C
1 x 3/4”
1 x 1/2”
4.8 V - 4Ah
2h
D
T5
T4
T 100°C
G13
T 135°C
1 x 3/4”
1 x 1/2”
4.8 V - 4Ah
2h
D
EVF18ELME 1 x 18W
EVF36ELME 1 x 36W
EVF58ELME 1 x 58W
EVF18ELBE
2 x 18W
EVF36ELBE
2 x 36W
EVF58ELBE 2 x 58W
EVF Technical features
A [mm]
B [mm]
C [mm]
D [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
EVF18EL
CODE
1000
96
95
602
4,50
2 x 3/4”
A
EVF36EL
1600
96
95
1202
5,70
2 x 3/4”
A
EVF58EL
1900
96
95
1490
7,00
2 x 3/4”
A
EVF18BEL
1000
200
95
602
9,00
2 x 3/4”
B
EVF36BEL
1600
200
95
1202
12,20
2 x 3/4”
B
EVF58BEL
1900
200
95
1490
14,70
2 x 3/4”
B
Reference details
A
A
D
8MA
C
8MA
B
3/4”
B
A
D
8MA
B
C
8MA
3/4”
Since 1961
2 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

3. Ex Lighting
EVF Technical features
A [mm]
B [mm]
C [mm]
D [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
1000
222
379
602
10,00
1 x 3/4” / 1 x 1/2”
C
EVF36ELME
1600
222
379
1202
12,00
1 x 3/4” / 1 x 1/2”
C
EVF58ELME
1900
222
379
1490
14,00
1 x 3/4” / 1 x 1/2”
EVF
CODE
EVF18ELME
C
EVF18ELBE
1000
287
265
602
16,00
1 x 3/4” / 1 x 1/2”
D
EVF36ELBE
1600
287
265
1202
19,00
1 x 3/4” / 1 x 1/2”
D
EVF58ELBE
1900
287
265
1490
21,00
1 x 3/4” / 1 x 1/2”
D
Reference details
C
A
B
1 -1/2”
C
D
3/4”
3/4”
D
A
B
3/4”
D
3/4”
C
1 -1/2”
EVF Installation and mounting details
Wall/structure mounting
type 4
108
45
Pole mounting
Assemblig detail with pole (typical)
3/4”
50
273
50
50
100
100
45°
8
12
45°
273
10
0
8
12
type 3
45
45
170
156
type 2
156
type 1
Pendant mounting
170
Ceiling mounting
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 3

4. Ex Lighting
EVF Polar diagrams – photometric data
EVF
EVF18BEL
EVF36BEL
EVF58BEL
EVF On request accessories
CODE
GABBIAEVFF18
DESCRIPTION
INSTALLATION
18W SIZE GALVANIZED STEEL WIRE PROTECTION GUARD
MATERIAL
GALVANIZED STEEL
GABBIAEVFF36
36W SIZE GALVANIZED STEEL WIRE PROTECTION GUARD
GALVANIZED STEEL
GABBIAEVFF58
58W SIZE GALVANIZED STEEL WIRE PROTECTION GUARD
GALVANIZED STEEL
GABBIAEVFF18IX
18W SIZE STAINLESS STEEL WIRE PROTECTION GUARD
STAINLESS STEEL
GABBIAEVFF36IX
36W SIZE STAINLESS STEEL WIRE PROTECTION GUARD
STAINLESS STEEL
GABBIAEVFF58IX
58W SIZE STAINLESS STEEL WIRE PROTECTION GUARD
STAINLESS STEEL
D18IX
18W SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL
D36IX
36W SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL
D58IX
58W SIZE STAINLESS STEEL REFLECTOR
20301.0151
SINGLE LAMP CEILING MOUNTING KIT C/W HARDWARE
STAINLESS STEEL
TYPE 1
ALUM. LIGHT ALLOY
20301.0152
TWIN LAMP CEILING MOUNTING KIT C/W HARDWARE
TYPE 1
ALUM. LIGHT ALLOY
20301.0153
SINGLE LAMP POLE MOUNTING KIT (SIZE 1” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20301.0155
SINGLE LAMP POLE MOUNTING KIT (SIZE 1 1/2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20301.0156
TWIN LAMP POLE MOUNTING KIT (SIZE 1 1/2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20301.0157
SINGLE LAMP POLE MOUNTING KIT (SIZE 2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20301.0158
TWIN LAMP POLE MOUNTING KIT (SIZE 2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20302.0128
SINGLE LAMP WALL/STRUCTURE MOUNTING KIT C/W HARDWARE
TYPE 3
GALVANIZED STEEL
20302.0128
TWIN LAMP WALL/STRUCTURE MOUNTING KIT C/W HARDWARE
TYPE 3
GALVANIZED STEEL
20301.0165
SINGLE LAMP PENDANT MOUNTING KIT C/W HARDWARE
TYPE 2
GALVANIZED STEEL
20301.0165
TWIN LAMP PENDANT MOUNTING KIT C/W HARDWARE
TYPE 2
GALVANIZED STEEL
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
4 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

5. LIGHTING FIXTURES
FOR INCANDESCENT AND
DISCHARGE LAMPS
Explosion Proof Electrical Equipment
EVAC
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
LIGHTING FIXTURE / CONTROL GEAR
ATEX 94/9/EC
GOST-R (RTR / RTN)
GOST-K
1Ex d IIC T6 (T5…T2) X
DIP A21 TA (80…290)°C
1Ex d IIC T6 (T5…T2) X
DIP A21 TA (80…290)°C
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
IP66
IP66
IP66
INERIS 01 ATEX 0054X
POCC IT. ГБ05.B02536
No. 07/43-269
EN 60079-0; EN 60079-1; EN 61241-1
ГОСТ Р 51330.9-99 (МЭК 60079-10-95)
ГОСТ Р 51330.13-99 (МЭК 60079-14-96)
ГОСТ Р МЭК 61241-3-99
ГОСТ Р 51330.0 / 1 / 8 / 14-99
ГОСТ Р МЭК 61241-1-1-2002
II 2 G Ex d IIC T6/T2
II 2 D Ex tD A21 T80°C / T290°C
EXECUTION
installation
PROTECTION DEGREE
CERTIFICATE REF.
RULES OF COMPLIANCE
Mechanical characteristics
Body
marine grade copper free aluminium (control gear & lamp body)
Globe
high-temperature resistant borosylicate glass
painting
external epoxy powders grey ral-9006 colour
screws
external stainless steel
gaskets
silicon rubber
cable entry
3/4” npt size threaded
Installation swivel bracket AISI 316L stainless steel
Electrical characteristics
Power supply (prc)
conventional ballast 230V - 50Hz (p.f. corrected - cos ρ ≥ 0,95)
Lampholders
porcelain E27/E40 size
Internal wiring
high-temperature resistant silicon rubber insulation cables
Terminals
suitable up to 4mm/sq cables
On Request Accessories:
•Ceiling mounting AISI 316L stainless steel kit complete with stainless steel hardware
•Pendant mounting AISI 316L stainless steel kit complete with stainless steel hardware
•Pole mounting kit 1” – 1 1/2” – 2” dia. complete with stainless steel hardware
•Wall/Structure mounting kit complete with stainless steel hardware
•Galvanized steel wire protection guard
•Stainless steel wire protection guard
•White stove enamelled aluminium reflectors
•Stainless steel reflectors
•External painting colour on request
•Control gear with voltage supply different than standard
•Threaded cable entry different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 5
EVAC
Ex Lighting

6. Ex Lighting
EVAC
EVAC Technical data
CODE
TEMPERATURE CLASS
(GAS)
LAMP
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
SIZE
CABLE ENTRY SIZE
DETAIL
LIGHTING FIXTURE FOR INCANDESCENT LAMP - POWER SUPPLY 230V-50Hz
EVAC101
100 W
EVAC100
100 W
EVAC201
T4
T 130°C
E-27
1 x 3/4"
A
T4
T 130°C
E-27
2 x 3/4"
B
200 W
T4
T3
T 130°C
T 195°C
E-27
1 x 3/4"
A
EVAC200
200 W
T4
T3
T 130°C
T 195°C
E-27
2 x 3/4"
B
EVAC301
300 W
T4
T3
T 130°C
T 195°C
E-40
1 x 3/4"
A
EVAC300
300 W
T4
T3
T 130°C
T 195°C
E-40
2 x 3/4"
B
EVAC501
500 W
T3
T 195°C
E-40
1 x 3/4"
A
EVAC500
500 W
T3
T 195°C
E-40
2 x 3/4"
B
EVAC100-E20
25 W
20 W
T5
T4
T 95°C
T 130°C
E-14 + Ba-15s
2 x 3/4"
B
1 x 3/4"
A
LIGHTING FIXTURE FOR HALOGEN LAMP - POWER SUPPLY 230V-50Hz
EVAC101-100H
100 W
T4
T 130°C
E-27
EVAC100-100H
100 W
EVAC201-150H
150 W
T4
T 130°C
E-27
2 x 3/4"
B
T1
T 130°C
E-27
1 x 3/4"
A
EVAC200-150H
150 W
T2
T 130°C
E-27
2 x 3/4"
B
250 W
T4
T3
T 130°C
T 195°C
EVAC301-250H
E-27
1 x 3/4"
A
EVAC300-250H
250 W
T4
T3
T 130°C
T 195°C
E-27
2 x 3/4"
B
LIGHTING FIXTURE FOR HIGH PRESSURE MERCURY VAPOUR LAMP - POWER SUPPLY 230V-50Hz
EVAC101-80HG
80 W
T4
T 130°C
E-27
2 x 3/4” / 1 x 1-1/2”
C
EVAC201-125HG
125 W
T3
T 195°C
E-27
2 x 3/4” / 1 x 1-1/2”
C
EVAC301-250HG
250 W
T3
T 195°C
E-40
2 x 3/4” / 1 x 1-1/2”
C
EVAC501-250HG
250 W
T4
T 130°C
E-40
2 x 3/4” / 1 x 1-1/2”
C
EVAC501-400HG
400 W
T3
T 195°C
E-40
2 x 3/4” / 1 x 1-1/2”
C
LIGHTING FIXTURE FOR HIGH PRESSURE SODIUM LAMP - POWER SUPPLY 230V-50Hz
EVAC101-70HPNA
70 W
T4
T 130°C
E-27
2 x 3/4" / 1 x 1-1/2"
C
EVAC301-150HPNA
150 W
T4
T 130°C
E-40
2 x 3/4" / 1 x 1-1/2"
C
EVAC301-250HPNA
250 W
T3
T2
T 195°C
T 290°C
E-40
2 x 3/4" / 1 x 1-1/2"
C
EVAC501-400HPNA
400 W
T3
T 195°C
E-40
2 x 3/4" / 1 x 1-1/2"
C
LIGHTING FIXTURE FOR METAL HALIDE LAMP - POWER SUPPLY 230V-50Hz
EVAC101-100MH
100 W
T4
T 130°C
E-27
2 x 3/4" / 1 x 1-1/2"
C
EVAC301-150MH
150 W
T4
T3
T 130°C
T 195°C
E-27
2 x 3/4" / 1 x 1-1/2"
C
EVAC301-250MH
250 W
T3
T 195°C
E-40
2 x 3/4" / 1 x 1-1/2"
C
EVAC501-400MH
400 W
T3
T 195°C
E-40
2 x 3/4" / 1 x 1-1/2"
C
LIGHTING FIXTURE FOR BLENDED LIGHT LAMP - POWER SUPPLY 230V-50Hz
EVAC201-160MLL
160 W
T3
T 195°C
E-27
2 x 3/4" / 1 x 1-1/2"
A
EVAC200-160MLL
160 W
T3
T 195°C
E-27
2 x 3/4" / 1 x 1-1/2"
B
EVAC301-250MLL
250 W
T3
T 195°C
E-40
2 x 3/4" / 1 x 1-1/2"
A
EVAC300-250MLL
250 W
T3
T 195°C
E-40
2 x 3/4" / 1 x 1-1/2"
B
Since 1961
6 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

7. Ex Lighting
EVAC Technical features
CODE
B [mm]
C [mm]
Ø D [mm]
Ø E [mm]
weight [Kg]
CABLE ENTRY
DETAIL
150
270
240
145
280
3,50
1 x 3/4”
A
EVAC100
150
270
240
145
280
3,50
2 x 3/4”
B
EVAC201
175
290
270
170
345
4,00
1 x 3/4”
A
EVAC200
175
290
270
170
345
4,00
2 x 3/4”
B
EVAC301
200
390
330
190
402
7,00
1 x 3/4”
A
EVAC300
200
390
330
190
402
7,00
2 x 3/4”
B
EVAC501
260
420
395
255
515
10,00
1 x 3/4”
A
EVAC500
260
420
395
255
515
10,00
2 x 3/4”
B
Reference details
Reference details
A
B
A
3/4”
A
2X3/4”
B
Ø8
.5
60
60
16
80
C
80
60
C
B
3
200
180
D
E
D
E
CODE
A [mm]
B [mm]
C [mm]
Ø D [mm]
Ø E [mm]
weight [Kg]
CABLE ENTRY
DETAIL
545
515
145
280
9,00
2 x 3/4”
1 x 1-1/2”
C
2 x 3/4”
1 x 1-1/2”
C
2 x 3/4”
1 x 1-1/2”
C
2 x 3/4”
1 x 1-1/2”
C
EVAC101-..HG
EVAC101-..HPNA
225
EVAC101-..MH
EVAC201-..HG
225
565
545
170
345
9,50
EVAC301-..HG
EVAC301-..HPNA
225
665
640
190
402
12,00
EVAC301-..MH
EVAC501-..HG
EVAC501-..HPNA
225
695
670
255
515
15,50
EVAC501-..MH
Reference details
C
A
1-1/2”
C
B
200
5
30
28 28
0
Ø1
192
D
E
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 7
EVAC
A [mm]
EVAC101

8. Ex Lighting
EVAC Installation and mounting details
237
16
type 1
Pendant mounting
type 2
275
180
54
EVAC
Ceiling mounting
Wall/structure mounting
type 3
283
58
Since 1961
8 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

9. Ex Lighting
EVAC Installation and mounting details
EVAC
Pole mounting / Assemblig detail with pole (typical)
SEALING
FITTINGS
SEALING
FITTINGS
POLE
POLE
25°
25°
EVAC Polar diagrams – photometric data
EVAC125HG
EVAC150HPS
EVAC100MH
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 9

10. Ex Lighting
EVAC Polar diagrams – photometric data
EVAC400HPS-D
EVAC400MH-D
EVAC
EVAC250HG-D
EVAC On request accessories
CODE
20302.0070
DESCRIPTION
INSTALLATION
EVAC 100 / 101 SIZE STANDARD REFLECTOR
MATERIAL
WHITE STOVE ENAMELLED ALUMININIUM
20302.0071
EVAC 200 / 201 SIZE STANDARD REFLECTOR
WHITE STOVE ENAMELLED ALUMININIUM
20302.0072
EVAC 300 / 301 SIZE STANDARD REFLECTOR
WHITE STOVE ENAMELLED ALUMININIUM
20302.0073
EVAC 500 / 501 SIZE STANDARD REFLECTOR
WHITE STOVE ENAMELLED ALUMININIUM
20302.0025
EVAC 100 / 101 SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL
20302.0026
EVAC 200 / 201 SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL
20302.0027
EVAC 300 / 301 SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL
20302.0028
EVAC 500 / 501 SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL
20302.0074
EVAC 100 / 101 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0075
EVAC 200 / 201 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0076
EVAC 300 / 301 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0077
EVAC 500 / 501 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0037
EVAC 100 / 101 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL
20302.0038
EVAC 200 / 201 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL
20302.0039
EVAC 300 / 301 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL
20302.0040 EVAC 500 / 501 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL
20302.0078
CEILING MOUNTING KIT C/W HARDWARE
TYPE 1
AISI 316L STAINLESS STEEL
20302.0079
WALL/STRUCTURE MOUNTING KIT C/W HARDWARE
TYPE 3
AISI 316L STAINLESS STEEL
20302.0082
PENDANT MOUNTING KIT C/W HARDARE AND EYE-BOLTS
TYPE 2
AISI 316L STAINLESS STEEL
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics showed
on this bulletin can be considered as binding on our confirmation only.
Since 1961
10 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

11. LIGHTING FIXTURES
FOR FLUORESCENT LAMPS
Explosion Proof Electrical Equipment
EVAC-FL
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
LIGHTING FIXTURE / CONTROL GEAR
ATEX 94/9/EC
GOST-R (RTR / RTN)
GOST-K
1Ex d IIC T6 X
DIP A21 TA (80)°C
1Ex d IIC T6 X
DIP A21 TA (80)°C
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
IP66
IP66
IP66
INERIS 01 ATEX 0054X
POCC IT. ГБ05.B02536
No. 07/43-269
EN 60079-0; EN 60079-1; EN 61241-1
ГОСТ Р 51330.9-99 (МЭК 60079-10-95)
ГОСТ Р 51330.13-99 (МЭК 60079-14-96)
ГОСТ Р МЭК 61241-3-99
ГОСТ Р 51330.0 / 1 / 8 / 14-99
ГОСТ Р МЭК 61241-1-1-2002
II 2 G Ex d IIC T6/T2
II 2 D Ex tD A21 T80°C / T290°C
EXECUTION
installation
PROTECTION DEGREE
CERTIFICATE REF.
RULES OF COMPLIANCE
Mechanical characteristics
Body
marine grade copper free aluminium (control gear & lamp body)
globe
high-temperature resistant borosylicate glass
painting
external epoxy powders grey ral-9006 colour
screws
external stainless steel
gaskets
silicon rubber
cable entry
3/4” npt size threaded
Installation swivel bracket
AISI 316L stainless steel
Electrical characteristics
Power supply (prc)
elettronic ballast 220V/240V - 50/60Hz (p.f.corrected - cos ρ ≥ 0,98)
lampholders
porcelain e27 size - plastic 2g10 size
internal wiring
high-temperature resistant silicon rubber insulation cables
terminals
suitable up to 4mm/sq cables
On Request Accessories:
•Ceiling mounting AISI 316L stainless steel kit complete with stainless steel hardware
•Pendant mounting AISI 316L stainless steel kit complete with stainless steel hardware
•Pole mounting kit 1” – 1 1/2” – 2” dia. complete with stainless steel hardware
•Wall/Structure mounting kit complete with stainless steel hardware
•Galvanized steel wire protection guard
•Threaded cable entry different than standard
•Stainless steel wire protection guard
•White stove enamelled aluminium reflectors
•Stainless steel reflectors
•External painting colour on request
•Electronic ballast with voltage supply different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 11
EVAC-FL
Ex Lighting

12. Ex Lighting
EVAC-FL
EVAC-FL Technical data
CODE
TEMPERATURE CLASS
(GAS)
LAMP
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
SIZE
CABLE ENTRY
SIZE
DETAIL
LIGHTING FIXTURES FOR FLUORESCENT LAMPS - POWER SUPPLY 220V/240V - 50/60Hz
EVAC101-15FL
1 x 15W
T6
T 80°C
E-27
1 x 3/4”
A
EVAC100-15FL
1 x 15W
T6
T 80°C
E-27
2 x 3/4”
B
EVAC201-23FL
1 x 23W
T6
T 80°C
E-27
1 x 3/4”
A
EVAC301-218FL
2 x 18W
T6
T 80°C
2G-10
2 x 3/4”
C
EVAC301-318FL
3 x 18W
T6
T 80°C
2G-10
2 x 3/4”
C
EVAC501-236FL
2 x 36W
T6
T 80°C
2G-10
2 x 3/4”
C
EVAC501-336FL
3 x 36W
T6
T 80°C
2G-10
2 x 3/4”
C
EVAC-FL Technical features
CODE
A [mm]
B [mm]
C [mm]
Ø D [mm]
Ø E [mm]
EVAC101-15FL
150
270
235
145
280
weight [Kg] CABLE ENTRY
3,5
DETAIL
1 x 3/4”
A
150
270
235
145
280
3,5
4 x 3/4”
B
175
270
255
170
345
4
1 x 3/4”
A
EVAC301-218FL
225
180
605
590
190
395
12
2 x 3/4”
EVAC301-318FL
225
605
590
190
395
12
2 x 3/4”
C
EVAC501-236FL
225
648
620
255
515
15,5
2 x 3/4”
C
EVAC501-336FL
225
620
255
515
15,5
2 x 3/4”
80
A
.5
C
∅8
60
80
Reference details
B
A
3/4”
180
C
3
60
60
200
80
60
16
.5
60
∅8
648
60
16
Reference details
200
3
80
EVAC100-15FL
EVAC201-23FL
A
2X3/4”
B
Ø8
.5
60
0
28
D
E
60
16
80
192
28
Ø1
C
80
60
C
B
3
200
180
Reference details
D
E
30
C
A
1-1/2”
200
5
C
B
200
5
30
28 28
0
Ø1
192
D
E
Since 1961
12 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

13. Ex Lighting
EVAC-FL Installation and mounting details
EVAC-FL
Ceiling mounting
237
16
type 1
Pendant mounting
275
type 2
54
180
Wall/structure mounting
type 3
283
58
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 13

14. Ex Lighting
EVAC-FL
EVAC-FL Installation and mounting details
Pole mounting
SEALING
FITTINGS
SEALING
FITTINGS
POLE
POLE
25°
25°
EVAC-FL On request accessories
CODE
DESCRIPTION
INSTALLATION
MATERIAL
20302.0070
EVAC 100 / 101 SIZE STANDARD REFLECTOR
WHITE STOVE ENAMELLED ALUM.
20302.0071
EVAC 200 / 201 SIZE STANDARD REFLECTOR
WHITE STOVE ENAMELLED ALUM.
20302.0072
EVAC 300 / 301 SIZE STANDARD REFLECTOR
WHITE STOVE ENAMELLED ALUM.
20302.0073
EVAC 500 / 501 SIZE STANDARD REFLECTOR
WHITE STOVE ENAMELLED ALUM.
20302.0025
EVAC 100 / 101 SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL
20302.0026
EVAC 200 / 201 SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL
20302.0027
EVAC 300 / 301 SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL
20302.0028
EVAC 500 / 501 SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL
20302.0074
EVAC 100 / 101 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0075
EVAC 200 / 201 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0076
EVAC 300 / 301 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0077
EVAC 500 / 501 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0037
EVAC 100 / 101 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL
20302.0038
EVAC 200 / 201 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL
20302.0039
EVAC 300 / 301 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL
20302.0040 EVAC 500 / 501 SIZE STAINLESS STEEL PROTECTION GUARD
20302.0078
CEILING MOUNTING KIT C/W HARDWARE
20302.0079
WALL/STRUCTURE MOUNTING KIT C/W HARDWARE
20302.0082
PENDANT MOUNTING KIT C/W HARDARE AND EYE-BOLTS
TYPE 1
TYPE 3
TYPE 2
STAINLESS STEEL
AISI 316L STAINLESS STEEL
AISI 316L STAINLESS STEEL
AISI 316L STAINLESS STEEL
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
14 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

15. PORTABLE LIGHTING FIXTURES
FOR INCANDESCENT LAMPS
Explosion Proof Electrical Equipment
EVP-100
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 /22 (Dusts)
Classification: Group II - Category 2G 2D
LIGHTING FIXTURE
ATEX 94/9/EC
GOST-R (RTR / RTN)
GOST-K
1Ex d IIC T4 (T5…T2) X
DIP A21 TA (130)°C
1Ex d IIC T4 (T5…T2) X
DIP A21 TA (130)°C
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
IP66
IP66
IP66
INERIS 01 ATEX 0054X
POCC IT. ГБ05.B02536
No. 07/43-269
EN 60079-0; EN 60079-1;
EN 61241-1
ГОСТ Р 51330.9-99 (МЭК 60079-10-95)
ГОСТ Р 51330.13-99 (МЭК 60079-14-96)
ГОСТ Р МЭК 61241-3-99
ГОСТ Р 51330.0 / 1 / 8 / 14-99
ГОСТ Р МЭК 61241-1-1-2002
II 2 G Ex d IIC T4/T2
II 2 D Ex tD A21 T130°C
EXECUTION
installation
PROTECTION DEGREE
CERTIFICATE REF.
RULES OF COMPLIANCE
Mechanical characteristics
Body
marine grade copper free aluminium (control gear & lamp body)
Globe
high-temperature resistant borosylicate glass
Painting
external epoxy powders grey ral-9006 colour
Screws
external stainless steel
Gaskets
silicon rubber
Cable entry
Nickel plated brass cable gland 1/2” npt (armoured cable)
Electrical characteristics
Power supply
12 ÷ 230V AC/DC
lampholders
e27 porcelain
On Request Accessories:
• External painting colour on request
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 15
EVP-100
Ex Lighting

16. Ex Lighting
EVP-100
EVP-100 Technical data
CODE
LAMP
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
SIZE
CABLE
ENTRY SIZE
DETAIL
LIGHTING FIXTURE FOR INCANDESCENT LAMP - POWER SUPPLY 230V-50Hz
EVP-100
100 W
T4
T 130°C
E-27
CABLE GLAND 1/2” NPT
A
EVP-100 Technical features
CODE
A [mm]
B [mm]
C [mm]
Ø D [mm]
weight [Kg]
CABLE ENTRY
DETAIL
395
257
287
150
4,00
CABLE GLAND 1/2” NPT
A
EVP-100
Reference details
B
A
A
ØD
C
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
16 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

17. AIRCRAFT WARNING LIGHTS
AND A.W.L. CONTROL PANELS
Explosion Proof Electrical Equipment
AWL
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
OBSTRUCTION LIGHTING FIXTURE
ATEX 94/9/EC
GOST-R (RTR / RTN)
GOST-K
1Ex d IIC T6 (T5…T2) X
DIP A21 TA (80…290)°C
1Ex d IIC T6 (T5…T2) X
DIP A21 TA (80…290)°C
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
IP66
IP66
IP66
INERIS 01 ATEX 0054X
POCC IT. ГБ05.B02536
No. 07/43-269
EN 60079-0; EN 60079-1; EN 61241-1
ГОСТ Р 51330.9-99 (МЭК 60079-10-95)
ГОСТ Р 51330.13-99 (МЭК 60079-14-96)
ГОСТ Р МЭК 61241-3-99
ГОСТ Р 51330.0 / 1 / 8 / 14-99
ГОСТ Р МЭК 61241-1-1-2002
ATEX 94/9/EC
GOST-R (RTR / RTN)
GOST-K
1Ex d IIB+H2 T6…T3
DIP A21 TA 85°C ÷ 150°C
1Ex d IIC T6 (T5…T2) X
DIP A21 TA (80…290)°C
1Ex d IIB+H2 T6…T3
DIP A21 TA 85°C ÷ 150°C
1Ex d IIC T6 (T5…T2) X
DIP A21 TA (80…290)°C
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
IP66
IP66
IP66
II 2 G Ex d IIC T6/T2
II 2 D Ex tD A21 T80°C / T290°C
EXECUTION
installation
PROTECTION DEGREE
CERTIFICATE REF.
RULES OF COMPLIANCE
CONTROL PANEL
II 2 G Ex d IIB+H2 T6...T3
II 2 D Ex tD A21 T85°C ÷ T150°C
II 2 G Ex d IIC T6/T2
II 2 D Ex tD A21 T80°C / T290°C
EXECUTION
PROTECTION DEGREE
PROTEZIONE MECCANICA
ICAO
in according to icao directive ANNEX 14
EN 60079-0; EN 60079-1;
EN 60079-11; EN 61241-0;
EN 61241-1
RULES OF COMPLIANCE
ГОСТ Р 51330.9-99 (МЭК 60079-10-95)
ГОСТ Р 51330.13-99 (МЭК 60079-14-96)
ГОСТ Р МЭК 61241-3-99
ГОСТ Р 51330.0 / 1 / 8 / 14-99
ГОСТ Р МЭК 61241-1-1-2002
Mechanical characteristics
Body
marine grade copper free aluminium
globe
high-temperature resistant borosylicate glass
fresnel len
shock proof acrilyc material suitable for high temperatures
painting
external epoxy powders grey ral-9006 colour
screws
external stainless steel
gaskets
silicon rubber
cable entry
3/4” npt size threaded
Electrical characteristics
Lampholders
porcelain e27 size
internal wiring
high-temperature resistant silicon rubber insulation cables
terminals
suitable up to 4mm/sq cables
medium intensity
flashing obstruction light 1450 / 2000 cd intensity (over than 45mt distance)
low intensity
steady obstruction light 30 cd intensity (less than 45mt distance)
construction
single awl - twin awl (1 main + 1 spare) in according to icao directive
On Request Accessories:
• Galvanized steel wire protection guard
• External painting colour on request
• Stainless steel wire protection guard
• Threaded cable entry different than standard
• Aircraft Warning Lights and control panel support manufactured in according to customer specification
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 17
AWL
Ex Lighting

18. Ex Lighting
AWL Technical data
AWL
CODE
LAMP TYPE
TEMPERATURE
CLASS
(GAS)
TEMPERATURE
CLASS
(DUSTS)
FLASHING
[x/min.]
LAMPHOLDER
CABLE
ENTRY
SIZE
DETAIL
EVAC201-F
100W INCANDESCENT
T4
T 130°C
-
E-27
1 x 3/4”
A
EVAC200-F
100W INCANDESCENT
T4
T 130°C
-
E-27
4 x 3/4”
A
EVAC201-XF
6J XENOFLASH
T6
T 80°C
65 ± 10
E-27
1 x 3/4”
C
EVAC200-XF
6J XENOFLASH
T6
T 80°C
65 ± 10
E-27
4 x 3/4”
C
EVAC201-XFR-24V
6J XENOFLASH
T6
T 80°C
65 ± 10
E-27
1 x 3/4”
C
EVAC201-F2R
2 x 100W INCAND.
T4
T 130°C
-
E-27
1 x 3/4”
B
EVAC201-XF2R
2 x 6J XENOFLASH
T6
T 80°C
65 ± 10
E-27
1 x 3/4”
D
EVAC301-25R
40W INCANDESCENT
T4
T 130°C
-
E-27
1 x 3/4”
C
EVAC300-25R
40W INCANDESCENT
T4
T 130°C
-
E-27
4 x 3/4”
C
AWL Technical features
CODE
EVAC201-F
A [mm]
B [mm]
Ø C [mm]
D [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
415
200
-
4,50
1 x 3/4”
A
430
EVAC200-F
430
415
200
-
4,50
4 x 3/4”
A
EVAC201-XF
280
260
176
-
4,50
1 x 3/4”
C
EVAC200-XF
280
260
176
-
4,00
4 x 3/4”
C
EVAC201-XFR-24V
280
260
176
-
4,00
1 x 3/4”
C
EVAC201-F2R
790
415
200
475
9,00
1 x 3/4”
B
EVAC201-XF2R
630
260
176
453
8,00
1 x 3/4”
D
EVAC301-25R
345
322
197
-
7,00
1 x 3/4”
C
EVAC300-25R
345
322
197
-
7,00
4 x 3/4”
C
Reference details
A
B
D
ØC
ØC
A
A
B
B
ØC
180
200
Since 1961
18 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

19. Ex Lighting
AWL Technical features
Reference details
D
AWL
C
D
ØC
ØC
A
A
B
B
ØC
180
200
Aircraft warning lights models
FRESNEL
ROTALLARM
XENOFLASH
MULTI-LED
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 19

20. Ex Lighting
AWL
AWL Control panels
ex d
INSTRUMENT
HOUSING WITH
PHOTOELECTRIC CELL
>>
01
BREATHER
VALVE
TYPE ecd
02
03
AUT.
ON
MAN.
OFF
04
05
ON
OFF
12
07
06
ON
OFF
ON
13
08
15
10
ON
OFF
OFF
14
09
ON
ON
OFF
OFF
16
11
ON
ON
OFF
17
OFF
18
19
Weatherproof Ip66
INSTRUMENT
HOUSING WITH
PHOTOELECTRIC CELL
>>
BREATHER
VALVE
TYPE ecde
02
01
03
AUT.
ON
MAN.
OFF
04
05
06
07
EVAC On request accessories
CODE
DESCRIPTION
MATERIAL
20302.0075
EVAC 200 / 201 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0076
EVAC 300 / 301 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0038
EVAC 200 / 201 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL
20302.0039
EVAC 300 / 301 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL
20302.0078
STRUCTURE MOUNTING KIT C/W HARDWARE
1030.00055
RED FRESNEL LEN Ø155mm
PLASTIC
1030.00186
ORANGE FRESNEL LEN Ø155mm
PLASTIC
1030.00211
GREEN FRESNEL LEN Ø155mm
PLASTIC
1030.00213
WHITE FRESNEL LEN Ø155mm
PLASTIC
AISI 316L STAINLESS STEEL
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
20 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

21. MEdium intensity and loW
intensity MULTILED System
AIRCRAFT warning lights
Ex Lighting
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts) - Safe area
Classification: Group II - Category 2G 2D
MIOL - LIOL
OBSTRUCTION WARNING LIGHTS
ATEX 94/9/EC
EXECUTION
INSTALLATION
PROTECTION DEGREE
CERTIFICATE REF.
RULES OF COMPLIANCE
INTERNATIONAL
REGULATIONS
COMPLIANCY FOR
VISUAL AIDS
GOST-R (RTR / RTN)
ZONE 1 / 2 - ZONE 21 / 22
safe area
1Ex d IIC T6 (T5…T2) X
DIP A21 TA (80…290)°C
ZONE 1 / 2 - ZONE 21 / 22
safe area
II 2 G Ex d IIC T6/T2
II 2 D Ex tD A21 T80°C / T290°C
GOST-K
1Ex d IIC T6 (T5…T2) X
DIP A21 TA (80…290)°C
ZONE 1 / 2 - ZONE 21 / 22
safe area
IP66
IP66
IP66
INERIS 01 ATEX 0054X
POCC IT. ГБ05.B02536
No. 07/43-269
EN 60079-0; EN 60079-1;
EN 61241-1
ГОСТ Р 51330.9-99 (МЭК 60079-10-95)
ГОСТ Р 51330.13-99 (МЭК 60079-14-96)
ГОСТ Р МЭК 61241-3-99
ГОСТ Р 51330.0 / 1 / 8 / 14-99
ГОСТ Р МЭК 61241-1-1-2002
ICAO International Standards and Recommended Practices:
Aerodromes - Annex 14 - Volume 1 - 4th Edition (November 2004)
Charapter 6 : Medium Intensity Type B Flashing obstacle light MIOL-B
Charapter 6 : Low Intensity Type A-B Steady burning obstacle light LIOL-A / LIOL-B
FAA Advisor Circular AC150/5345-43F E.B.#67 - Lamp type MIOL-B / LIOL-A / LIOL-B
Mechanical characteristics
Body
Painting
Marine grade copper free aluminium
High-temperature resistant borosylicate glass (zone 1/2 - 21/22 version)
Transparent polycarbonate u/v resistant (safe area version)
External epoxy powders grey ral-9006 colour
Screws
External stainless steel
Gaskets
Silicon rubber
Cable Entry
3/4" Npt size threaded
Globe
Electrical characteristics
Leds
separate groups with individual led protection system - led technology stalilized by constant current generator
Consumption
LIOL-B = 4,8w (single and dual) / miol-B = 30w (single) - 60w (dual)
Medium intensity (MIOL)
flashing light with intensity 2000 cd (+/-25%) flashing 40 flash/minute
Low intensity (LIOL)
steady burning with intensity 32 cd (flashing on request)
Realization
single group leds system with own reflector dual groups leds system, each group with own reflector
(1 main + 1 reserve)
Optical characteristics
Horizontal beam radiation
360° (miol / liol)
Vertical beam radiation
liol = between 5° and 10° / miol = 3°
Efficency
> 91% - pfc factor 0,99
Expetancy life
long life time - more than 10 years
Apply to:
Flare - Airport - Stacks - High buildings - Chimneys - Tower crane - Pipelines - Bridges - Radio and Television towers
Transmission lines - Wind turbines - Radar - and so on
On request accessories:
•Stainless steel wire protection guard
•Aircraft Warning Lights and control panel support manufactured in according to customer specification
•External painting colour on request
•Threaded cable entry different than standard
•Control panel with simultaneous or catenary multilight flashing system
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 21
MIOL - LIOL
Explosion Proof Electrical Equipment

22. MIOL - LIOL
Ex Lighting
MIOL - LIOL Technical data
LED LAMP
GROUP
CODE
VISUAL AIDS
TYPES
FLASHING
[x/min.]
EXECUTION
TEMPERATURE TEMPERATURE
CLASS (GAS) CLASS (DUSTS)
CABLE
ENTRIES
DETAIL
1 x 3/4"
B
Low Intensity Obstruction warning lights
LIOL-A-S
> 10 cd x 1
LIOL-A-D
RED FIXED
> 10 cd x 2
LIOL-B-S
RED FIXED
> 32 cd x 1
LIOL-B-D
RED FIXED
> 32 cd x 2
RED FIXED
Ex-d
-
T6
T80°C
IP66
-
-
-
2 x 3/4"
D
Ex-d
T6
T80°C
1 x 3/4"
B
IP66
-
-
-
2 x 3/4"
D
Ex-d
T6
T80°C
1 x 3/4"
B
IP66
-
2 x 3/4"
D
T6
T80°C
1 x 3/4"
B
IP66
-
-
Ex-d
-
-
2 x 3/4"
D
MEDIUM Intensity Obstruction warning lights
MIOL-A-S
= 20.000 cd x 1
WHITE
FLASHING
40
IP66
-
-
2 x 3/4"
C
MIOL-A-D
= 20.000 cd x 2
WHITE
FLASHING
40
IP66
-
-
2 x 3/4"
C
MIOL-B-S
= 2.000 cd x 1
RED
FLASHING
40
Ex-d
T6
T80°C
1 x 3/4"
A
RED
FLASHING
= 2.000 cd x 2
MIOL-B-D
= 2.000 cd x 1
MIOL-C-S
MIOL-C-D
RED FIXED
= 2.000 cd x 2
RED FIXED
IP66
40
-
-
2 x 3/4"
C
Ex-d
T6
T80°C
1 x 3/4"
A
IP66
-
-
-
2 x 3/4"
C
Ex-d
T6
T80°C
1 x 3/4"
A
IP66
-
2 x 3/4"
C
T6
T80°C
1 x 3/4"
A
IP66
-
-
Ex-d
-
-
2 x 3/4"
C
MIOL - LIOL Technical features
MIOL
Reference details
MIOL
A
MIOL
260
LIOL
Reference details
B
LIOL
LIOL
T
DO NO
S
SOTT O TE
E
IR
310
315
(FIXING)
DO
NO NOT
N
N
O
D
SE
GI NE
ER IO
EN ENS
T
NE
RG
DO
NO NOT
N
IO
W H IL E E N E
ED
NON
AP
R
S
N
SOTT O TE
E
IR
ED
NON
AP
R
151
(FIXING)
768
O
RG
W H IL E E N E
EN
W
SO HIL
TT E
O
EN
OP RIRE
AP
W
SO HIL
TT E
O
D
SE
GI NE
ER IO
EN ENS
T
T
DO NO
EN
P
EN
OP RIRE
AP
IS
NE
P
IS
IO
445
150
115,5
(FIXING)
135,5
270
275
(FIXING)
Since 1961
22 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

23. MIOL
Reference details
C
MIOL
LIOL
MIOL - LIOL Technical features
Reference details
D
MIOL
150
240
MIOL
LIOL
LIOL
LIOL
660
200
410
191
320
400
MIOL - LIOL Main rules for aircraft warning lights
MAIN RULES FOR VISUAL AIDS
ICAO Annex 14 - Aerodromes Vol. 1 - Chapter 6 / 10 (July 2004)
• The marking and/or lighting of obstacles is intended to reduce hazards to aircraft by indicating the presence of the obstacles
(ICAO: Aerodromes - Annex 14 - Vol. 1 - Ch. 6.1)
• Marking (red-orange/white painting) is used for day time
• Marking may be ommitted when the obstacle is lighted
• A fixed obstacle above a horizontal surface should be marked and, if the aerodrome is used at night, lighted..
(ICAO: Aerodromes - Annex 14 - Vol. 1 - Ch. 6.1.4)
• A system of preventive maintenance of visual aids shall be employed to ensure lighting and marking system reliability
(ICAO: Aerodromes - Annex 14 - Vol. 1 - Ch. 10.4.2)
• The reliability of installed lighting equipments shold not less than one year
(ICAO: Aerodromes - Annex 14 - Vol. 1 - Ch. 10.4.6)
• The number and arrangement of Low, Medium or High Intensity Obstacle Lights , at each level to be marked, shall be such that the object
is indicated from every angle in azimuth
• Where a light is shielded in any direction by another, additional light shall be provided
(ICAO: Aerodromes - Annex 14 - Vol. 1 - Ch. 6.3.22)
• The number of lights needed for each level depends on the outside diameter of the obstacle
• The top lights should be placed sufficiently below the top, so as to minimize contamination by smoke, powders, and so on..
(ICAO: Aerodromes - Annex 14 - Vol. 1 - Ch. 6.3.12)
AWL TYPES (Aircraft Warning Lights)
LIOL-A / B Low Intensity Obstacle Lights on fixed objects, Type-A / Type-B, shall be steady burning RED lights
(ICAO: Aerodromes - Annex 14 - Vol. 1 - Ch. 6.3.23)
MIOL-A Medium Intensity Obstacle Lights on fixed objects, Type-A , shall be flashing WHITE lights
MIOL-B Medium Intensity Obstacle Lights on fixed objects, Type-B , shall be flashing RED lights
MIOL-C Medium Intensity Obstacle Lights on fixed objects, Type-C , shall be steady burning RED lights
(ICAO: Aerodromes - Annex 14 - Vol. 1 - Ch. 6.3.30)
MIOL-A / MIOL-B Medium Intensity Obstacle Lights Type-A / Type-B, located on an obstacle, shall be flash simultaneously
(ICA: Aerodromes - Annex 14 - Vol. 1 - Ch. 6.3.32)
HIOL-A / B High Intensity Obstacle Lights on fixed objects, Type-A / Type-B, shall be flashing WHITE lights
(ICAO: Aerodromes - Annex 14 - Vol. 1 - Ch. 6.3.33)
HIOL-A High Intensity Obstacle Lights Type-A, located on an obstacle, shall be flash simultaneously
(ICAO: Aerodromes - Annex 14 - Vol. 1 - Ch. 6.3.35)
HIOL-B High Intensity Obstacle Lights Type-B, indicating the presence of tower supporting overhead wires, an others.. shall be flash sequentially
(ICAO: Aerodromes - Annex 14 - Vol. 1 - Ch. 6.3.36)
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 23
MIOL - LIOL
Ex Lighting

24. MIOL - LIOL
Ex Lighting
MIOL - LIOL Indicative diagram to obstruction light selection
OBSTACLE ELEVATION
> 45 m
NO
NO
MARKED
STRUCTURE (1)
YES
MARKED
STRUCTURE (1)
LIOL-A
LIOL-B
EXTENDED
YES
> 150 m
VERTICAL
STRUCTURE
TYPE
YES
MIOL-B + LIOL-B
MIOL-C
NO
YES
LEGEND
(1)
DUAL MIOL-A/B
MIOL-A
DUAL MIOL-A/C
DAY: HIOL-A
+ NIGHT: MIOL-B
DAY: HIOL-A
NIGHT: HIOL-A
DAY: HIOL-A
+ NIGHT: MIOL-C
DAY: MIOL-A
+ NIGHT: MIOL-B
DAY: MIOL-A
NIGHT: MIOL-A
DAY: MIOL-A
+ NIGHT: MIOL-C
Medium intensity obstruction light - TYPE A
MIOL-B
DUAL HIOL-A/C
Low intensity obstruction light - TYPE B
MIOL-A
HIOL-A
Low intensity obstruction light - TYPE A
LIOL-B
DUAL HIOL-A/B
painted obstacle in acc. to icao directive
LIOL-A
NO
Medium intensity obstruction light - TYPE B
MIOL-C
Medium intensity obstruction light - TYPE C
HIOL-A
High intensity obstruction light - TYPE A
HIOL-B
High intensity obstruction light - TYPE B
MIOL - LIOL Polar diagrams – photometric data
LIOL 32cd - Polar
LIOL 32cd - CARTESIAN
Flux 76.52 Im
Maximum 69.78 cd
Position H=-35.00 V=5.00
Efficiency: 100.00%
MIOL 2000cd - Polar
Flux 76.52 Im
Maximum 69.78 cd
Position H=-35.00 V=5.00
Efficiency: 100.00%
Flux 1864.58 Im
Maximum 4301.23 cd
Position H=80.00 V=-90.00
Efficiency: 100.00%
asymmetric VH
asymmetric VH
Flux 1864.58 Im
Maximum 4301.23 cd
Position H=80.00 V=-90.00
Efficiency: 100.00%
asymmetric VH
VH Planes
VH Planes
MIOL 2000cd - Cartesian
VH Planes
asymmetric VH
VH Planes
H Angles
H Angles
MIOL - LIOL On request accessories
CODE
DESCRIPTION
MATERIAL
20302.0074
EVAC 100 / 101 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0077
EVAC 500 / 501 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0037
EVAC 100 / 101 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL
20302.0040
EVAC 500 / 501 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL
CONTROL PANEL WITH SIMULTANEOUS OR CATENARY MULTILIGHT FLASHING SYSTEM
ALUMINIUM / PAINTED STEEL
REMARK: Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
24 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

25. FLOODLIGHTS FOR HALOGEN AND
DISCHARGE LAMPS
Explosion Proof Electrical Equipment
SFDE
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
FLOODLIGHT / PROJECTOR
ATEX 94/9/EC
EXECUTION
INSTALLATION
GOST-K
1Ex de IIB T6 (T3…T2)
DIP A21 TA (200…230) °C
1Ex de IIB T6 (T3…T2)
DIP A21 TA (200…230) °C
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
PROTECTION DEGREE
ZONE 1 / 2 - ZONE 21 / 22
IP66
IP66
IP66
INERIS 01 ATEX 0018
POCC IT. ГБ05.B02536
No. 07/43-269
EN 60079-0; EN 60079-1; EN 61241-1
ГОСТ Р 51330.9-99 (МЭК 60079-10-95)
ГОСТ Р 51330.13-99 (МЭК 60079-14-96)
ГОСТ Р МЭК 61241-3-99
ГОСТ Р 51330.0 / 1 / 8 / 14-99
ГОСТ Р МЭК 61241-1-1-2002
CERTIFICATE REF.
RULES OF COMPLIANCE
GOST-R (RTR / RTN)
II 2 G Ex d / Ex de IIB T3/T2
II 2 D Ex tD A21 T200°C / T229°C
Mechanical characteristics
Body
marine grade copper free aluminium
Diffuser
tempered front glass
support
adjustable type hot dip galvanized steel
reflector
internal polished aluminium
painting
external epoxy powders grey ral-9006 colour
screws
external stainless steel
gaskets
silicon rubber
cable entry
3/4” npt size threaded
Electrical characteristics
Power supply
conventional ballast 230v - 50hz (p.f.corrected - cos ρ ≥ 0,95)
lampholders
porcelain e40 size
internal wiring
high-temperature resistant silicon rubber insulation cables
terminals
suitable up to 4mm/sq cables
On Request Accessories:
• External painting colour on request
• Control gear with voltage supply different than standard
• Threaded cable entry different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 25
SFDE
Ex Lighting

26. Ex Lighting
SFDE Technical data
POWER
LAMP
SFDE
CODE
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
SIZE
CABLE ENTRY
SIZE
DETAIL
2 x ISO-M20
A
FLOODLIGHTS FOR HALOGEN LAMP - POWER SUPPLY 230V-50Hz
SFDE500IA
500 W
T2
T 229°C
E-40
FLOODLIGHTS FOR HIGH PRESSURE SODIUM LAMP - POWER SUPPLY 230V-50Hz
SFDE150HPNA
150 W
T4
T 200°C
E-40
2 x ISO-M20
A
SFDE250HPNA
250 W
T4
T 200°C
E-40
2 x ISO-M20
A
SFDE400HPNA
400 W
T3
T 200°C
E-40
2 x ISO-M20
A
FLOODLIGHTS FOR METAL HALIDE LAMP - POWER SUPPLY 230V-50Hz
SFDE250MH
250 W
T4
SFDE400MH
400 W
T3
T 200°C
E-40
2 x ISO-M20
A
T 200°C
E-40
2 x ISO-M20
A
SFDE Technical features
CODE
A [mm]
B [mm]
C [mm]
D [mm]
E [mm]
SFDE150HPNA
485
425
290
270
504
F [mm]
88
WEIGHT [Kg] CABLE ENTRY
25,00
2 x ISO-M20
DETAIL
A
SFDE250HPNA
485
425
290
270
504
88
25,00
2 x ISO-M20
A
SFDE400HPNA
485
425
290
270
504
88
25,00
2 x ISO-M20
A
SFDE250MH
485
425
290
270
504
88
25,00
2 x ISO-M20
A
SFDE400MH
485
425
290
270
504
88
25,00
2 x ISO-M20
A
SFDE500 IA
485
425
290
270
504
88
21,00
2 x ISO-M20
A
Reference details
A
F
C
E
B
D
A
2 x ISOM20
2 x ISOM20
110 110
110 110
SFD250HPS
SFD400MH
SFD500IA
REMARK: Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
26 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

27. FLOODLIGHTS FOR INCANDESCENT
AND DISCHARGE LAMPS
Explosion Proof Electrical Equipment
RCDE
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
FLOODLIGHT / PROJECTOR
ATEX 94/9/EC
EXECUTION
GOST-R (RTR / RTN)
GOST-K
1Ex d IIC T4/T3/T X
DIP A21 TA 200°C,
DIP A21 TA (135, 160, 200, 230)°C
1Ex d IIC T4/T3/T2 X
DIP A21 TA (135, 160, 200, 230)°C
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
IP66
IP66
IP66
INERIS 03 ATEX 0004 X
POCC IT. ГБ05.B02536
No. 07/43-269
EN 60079-0; EN 60079-1; EN 61241-1
ГОСТ Р 51330.9-99 (МЭК 60079-10-95)
ГОСТ Р 51330.13-99 (МЭК 60079-14-96)
ГОСТ Р МЭК 61241-3-99
ГОСТ Р 51330.0 / 1 / 8 / 14-99
ГОСТ Р МЭК 61241-1-1-2002
II 2 G Ex d IIC T4/T3/T2
II 2 D Ex tD A21 T135°C/T160°C T200°C/T230°C
INSTALLATION
PROTECTION DEGREE
CERTIFICATE REF.
RULES OF COMPLIANCE
CONTROL GEAR
ATEX 94/9/EC
GOST-R (RTR / RTN)
GOST-K
1Ex d IIC T6 (T5…T2) X
DIP A21 TA (80…290)°C
1Ex d IIC T6 (T5…T2) X
DIP A21 TA (80…290)°C
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
IP66
IP66
IP66
INERIS 01 ATEX 0054X
POCC IT. ГБ05.B02536
No. 07/43-269
EN 60079-0; EN 60079-1; EN 61241-1
ГОСТ Р 51330.9-99 (МЭК 60079-10-95)
ГОСТ Р 51330.13-99 (МЭК 60079-14-96)
ГОСТ Р МЭК 61241-3-99
ГОСТ Р 51330.0 / 1 / 8 / 14-99
ГОСТ Р МЭК 61241-1-1-2002
II 2 G Ex d IIC T6/T2
II 2 D Ex tD A21 T80°C/T290°C
EXECUTION
INSTALLATION
PROTECTION DEGREE
CERTIFICATE REF.
RULES OF COMPLIANCE
Mechanical characteristics
Body
marine grade copper free aluminium
Diffuser
tempered front glass
Support
adjustable type hot dip galvanized steel
Reflector
internal polished aluminium
Painting
external epoxy powders grey ral-9006 colour
Screws
external stainless steel
Gaskets
silicon rubber
Cable entry
3/4” npt size threaded
Electrical characteristics
Power supply
conventional ballast 230V - 50Hz (p.f.corrected - cos ρ ≥ 0,95)
Lampholders
porcelain E40 size
Internal wiring
high-temperature resistant silicon rubber insulation cables
Terminals
suitable up to 4mm/sq cables
On Request Accessories:
• External painting colour on request
• Control gear with voltage supply different than standard
• Threaded cable entry different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 27
RCDE
Ex Lighting

28. Ex Lighting
RCDE Technical data
TEMPERATURE CLASS
(GAS)
LAMP
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
SIZE
CABLE ENTRY
SIZE
DETAIL
1x3/4”
A
1x3/4”
A
FLOODLIGHTS FOR INCANDESCENT LAMP - POWER SUPPLY 230V-50Hz
RECDE500
500 W
T2
RECDE500
500 W
T 230°C
E-40
FLOODLIGHTS FOR BLENDED LIGHT LAMP - POWER SUPPLY 230V-50Hz
T3
T 200°C
E-40
FLOODLIGHTS FOR HIGH PRESSURE MERCURY VAPOUR LAMP - POWER SUPPLY 230V-50Hz
RECDE500 250HG
250 W
T3
T 160°C
E-40
3x3/4”
B
RECDE500 400HG
400 W
T3
T 200°C
E-40
3x3/4”
B
FLOODLIGHTS FOR HIGH PRESSURE SODIUM LAMP - POWER SUPPLY 230V-50Hz
RECDE500 250HPNA 250 W
T4
RECDE500 400HPNA 400 W
T3
T 135°C
3x3/4”
B
T 200°C
E-40
E-40
3x3/4”
B
FLOODLIGHTS FOR METAL HALIDE LAMP - POWER SUPPLY 230V-50Hz
RECDE500 250MH
250 W
T4
T 135°C
E-40
3x3/4”
B
RECDE500 400MH
400 W
T3
T 200°C
E-40
3x3/4”
B
WEIGHT [Kg] CABLE ENTRY
DETAIL
RCDE Technical features
CODE
A [mm]
RECDE500
RECDE500 250HG
542
542
B [mm]
C [mm]
D [mm]
378
378
376
406
-
700
21,00
29,00
1 x 3/4”
3 x 3/4”
A
B
RECDE500 250HPNA
542
378
406
700
29,50
3 x 3/4”
B
RECDE500 400HG
542
378
406
700
31,00
3 x 3/4”
B
RECDE500 400HPNA
542
378
406
700
31,50
3 x 3/4”
B
RECDE500 250MH
542
378
406
700
26,50
3 x 3/4”
B
RECDE500 400MH
542
378
406
700
31,50
3 x 3/4”
B
B
1x3/4”
1x3/4”
2x3/4”
with PLG2
B
A
D
A
B
A
RCDE
CODE
C
RCDE250MH
220
220
C
RCDE250HG
RCDE250HPS
REMARK: Due to the development of the national and international specifications and of the technology, the above technical
characteristics showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
28 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

29. Explosion Proof Electrical Equipment
Ex Lighting
EVO - EVT - TLF
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
PORTHOLE LIGHTING FIXTURE (EVO)
ATEX 94/9/EC
EXECUTION
GOST-R (RTR / RTN)
GOST-K
1Ex d IIC T3 X, DIP A21 TA 200°C
1Ex d IIC T3 X, DIP A21 TA 200°C
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
IP66
IP66
IP66
INERIS 01 ATEX 0039 X
POCC IT. ГБ05.B02536
No. 07/43-269
EN 60079-0; EN 60079-1; EN 61241-0; EN 61242-1
ГОСТ Р 51330.9-99 (МЭК 60079-10-95)
ГОСТ Р 51330.13-99 (МЭК 60079-14-96)
ГОСТ Р МЭК 61241-3-99
ГОСТ Р 51330.0 / 1 / 8 / 14-99
ГОСТ Р МЭК 61241-1-1-2002
II 2 G Ex d IIC T3,
INSTALLATION
PROTECTION DEGREE
CERTIFICATE REF.
RULES OF COMPLIANCE
II 2 D Ex tD A21 T200°C
LIGHTING FIXTURE (EVT)
ATEX 94/9/EC
EXECUTION
GOST-R (RTR / RTN)
GOST-K
1Ex d IIC T4, DIP A21 TA 135°C
1Ex d IIC T4, DIP A21 TA 135°C
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
IP66
IP66
IP66
INERIS 01 ATEX 0040
POCC IT. ГБ05.B02536
No. 07/43-269
EN 60079-0; EN 60079-1; EN 61241-0; EN 61242-1
ГОСТ Р 51330.9-99 (МЭК 60079-10-95)
ГОСТ Р 51330.13-99 (МЭК 60079-14-96)
ГОСТ Р МЭК 61241-3-99
ГОСТ Р 51330.0 / 1 / 8 / 14-99
ГОСТ Р МЭК 61241-1-1-2002
II 2 G Ex d IIC T4,
INSTALLATION
PROTECTION DEGREE
CERTIFICATE REF.
RULES OF COMPLIANCE
II 2 D Ex tD A21 T135°C
LIGHTING FIXTURE (TLF)
ATEX 94/9/EC
GOST-R (RTR / RTN)
GOST-K
II 2 G Ex d / Ex de IIB T3
II 2 D Ex tD A21 T200°C
1Ex d IIB T3, 2Ex de IIB T3
DIP A21 TA 200°C
1Ex d IIB T3, 2Ex de IIB T3
DIP A21 TA 200°C
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
IP65
IP65
IP65
INERIS 01 ATEX 0026
POCC IT. ГБ05.B02536
No. 07/43-269
EN 60079-0; EN 60079-1; EN 61241-0; EN 61242-1
ГОСТ Р 51330.9-99 (МЭК 60079-10-95)
ГОСТ Р 51330.13-99 (МЭК 60079-14-96)
ГОСТ Р МЭК 61241-3-99
ГОСТ Р 51330.0 / 1 / 8 / 14-99
ГОСТ Р МЭК 61241-1-1-2002
EXECUTION
INSTALLATION
PROTECTION DEGREE
CERTIFICATE REF.
RULES OF COMPLIANCE
Mechanical characteristics
Body
marine grade copper free aluminium
diffuser
borosilicate frontal glass (evt)
diffuser
tempered frontal glass (evo - tlf)
painting
external epoxy powders grey ral-9006 colour
screws
external stainless steel
gaskets
silicon rubber
cable entry
3/4” npt size threaded
protection guard
galvanized wire steel (evt only)
Electrical characteristics
Power supply
standard voltage 230v - 50hz
lampholders
porcelain e27 size
internal wiring
high-temperature resistant silicon rubber insulation cables
On Request Accessories:
• External painting colour on request
• Threaded cable entry different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 29
EVO - EVT - TLF
LIGHTING FIXTURES
FOR INCANDESCENT LAMPS

30. EVO – EVT - TLF Technical data
CODE
LAMP
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
SIZE
CABLE ENTRY
SIZE
DETAIL
LIGHTING FIXTURE FOR INCANDESCENT LAMP - POWER SUPPLY 230V-50Hz
EVO100
100 W
T3
EVT100
100 W
T4
TLF100
100 W
T3
T 200°C
E-27
1x3/4”
T135°C
E-27
2x3/4”
B
T 200°C
E-27
2x3/4”
C
A
EVO – EVT - TLF Technical features
CODE
A [mm]
B [mm]
C [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
EVO100
Ø140
185
Ø162
2,00
1 x 3/4”
A
EVT100
Ø233
180
155
4,00
2 x 3/4”
B
TLF100
309
127
165
3,00
2 x 3/4”
C
Reference details
1 x 3/4”
B
Ø
C
A
C
2 x 3/4”
B
B
ØA
A
C
A
C
2 x 3/4”
B
EVO - EVT - TLF
Ex Lighting
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
30 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

31. LIGHTING FIXTURES FOR HIGH
EFFICENCY LED LAMPS
AND FLUORESCENT TUBE LAMPS
Explosion Proof Electrical Equipment
EXL
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
LIGHTING FIXTURE
ATEX 94/9/EC
GOST-R (RTR / RTN)
GOST-K
1Ex d IIB T6, 1Exd [ia/ib] IIB T6,
DIP A21 TA 85°C
1Ex d IIB T6, 1Exd [ia/ib] IIB T6,
DIP A21 TA 85°C
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
IP66
IP66
IP66
IMQ 09 ATEX 020
POCC IT. ГБ05.B02537
No. 07/43-269
EN 60079-0; EN 60079-1; EN 61241-0;
EN 61242-1
ГОСТ Р 51330.9-99 (МЭК 660079-10-95)
ГОСТ Р 51330.13-99 (МЭК 660079-14-96)
ГОСТ Р МЭК 61241-3-99
ГОСТ Р 51330.0 / 1 / 8 / 14-99
ГОСТ Р МЭК 61241-1-1-2002
II 2 G Ex d IIB T6
II 2 D Ex tD A21 T85°C
EXECUTION
INSTALLATION
PROTECTION DEGREE
CERTIFICATE REF.
RULES OF COMPLIANCE
Mechanical characteristics
Body
marine grade copper free aluminium
Diffuser
high-temperature resistant borosylicate glass
painting
external epoxy powders grey ral-9006 colour
screws
external stainless steel
reflectors
white stove enamelled sheet steel
cable entry
3/4” npt size threaded c/w cable gland
Electrical characteristics
Power supply
lampholders
internal wiring
elettronic ballast 220V/240V - 50/60Hz (p.f.corrected - cos ρ ≥ 0,98)
bi-pin G5 cap (fluorescent lamp only)
high-temperature resistant silicon rubber insulation cables
terminals
suitable up to 4mm/sq cables
emergency unit
emergency unit with inverter charger and Ni-Cd battery pack
see technical features for more details
Functional characteristics
· EXL08ESA (Always ON - Maintained): 8W fluorescent lamp and electronic ballast 230V AC and emergency unit 3.6 V - 2Ah for an autonomy of 2 hours
3.6 V - 4Ah for an autonomy 3 hours
· EXL08E (Emergency only - Maintained): 8W fluorescent lamp and emergency unit 3.6 V - 2Ah with autonomy 3 hours
· EXL08L (Network only - Not Maintained): with high brightness LEDs (350mA - 4,8 W) Supply from 120V to 240V AC / DC
· EXL08LE (Emergency only - Maintained): with high brightness LEDs (350mA - 4,8 W) 220/240V AC and emergency unit 6V - 2Ah for an
autonomy of 3 hours complete with charge status monitor LED system (RED: battery under charging – GREEN: battery loaded)
Remarks
· EXL08E / EXL08ESA - 8W fluorescent lamp: emergency light intensity is 40% of light intensity with networking power supply
· EXL08LE - with high brightness LEDs (350mA -4.8 W): emergency light intensity is 100% of light intensity with networking power supply
On Request Accessories:
• External painting colour on request
• Electronic ballast with voltage supply different than standard
• Threaded cable entry different than standard
• Self-adhesive green label with EXIT sign (language on request)
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 31
EXL
Ex Lighting

32. Ex Lighting
EXL Technical data
POWER SUPPLY
LAMP
mA (LED)
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
EMERGENCY
UNIT
AUTONOMY
LIGHTING FIXTURES FOR FLUORESCENT TUBE LAMPS
EXL08
220 ÷ 240V AC
8W
-
T6
T 85°C
-
-
EXL08E-3
220 ÷ 240V AC
8W
-
T6
T 85°C
3,6V - 4A/h
3h
EXL08ESA-3
220 ÷ 240V AC
8W
-
T6
T 85°C
3,6V - 4A/h
3h
EXL08L
120 ÷ 240V AC/DC
4,8 W
350
T6
T 85°C
-
-
EXL08LE
220 ÷ 240V AC
4,8 W
350
T6
T 85°C
3,6V - 2A/h
3h
EXL208L
120 ÷ 240V AC/DC
9,16 W
350
T6
T 85°C
-
-
LIGHTING FIXTURES FOR HIGH EFFICENCY LED LAMPS
EXL Technical features
E [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
EXL08
CODE
A [mm]
380
B [mm]
170
C [mm]
125
D [mm]
370
125
8,00
1 x 3/4”
A
EXL08E-3
380
170
125
370
125
8,00
1 x 3/4”
A
EXL08ESA-3
380
170
125
370
125
8,00
1 x 3/4”
A
EXL08L
380
170
125
370
125
8,00
1 x 3/4”
A
EXL08LE
380
170
125
370
125
8,00
1 x 3/4”
A
EXL208L
380
170
125
370
125
8,00
1 x 3/4”
A
Reference details
A
A
C
E
B
EXL
CODE
D
3/4"
EXL On request accessories
CODE
DESCRIPTION
EXL-08
MATERIAL
SELF-ADHESIVE GREEN “EXIT” LABEL
2070.00088
POLYESTER
EXL-08L
EXL2-08L
REMARK: Due to the development of the national and international specifications and of the technology, the above technical
characteristics showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
32 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

33. LIGHTING FIXTURES FOR
FLUORESCENT TUBE LAMPS
Explosion Proof Electrical Equipment
EVG
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
18W LIGHTING FIXTURE
ATEX 94/9/EC
GOST-R (RTR / RTN)
2Ex edq IIC T4 (T6)
DIP A21 TA 80°C
II 2 G Ex edq IIC T4
II 2 D Ex tD A21 T 80°C
EXECUTION
AMBIENT TEMPERATURE
36W LIGHTING FIXTURE
ATEX 94/9/EC
II 2 G Ex edq IIC T4
II 2 D Ex tD A21 T 80°C
-20°C ÷ +60°C
-20°C ÷ +60°C
IP66
IP66
IP66/64
PTB 97 ATEX 2223
POCC DE. ГБ05.B01788
PTB 07 ATEX 2040
EN 60079-0; EN 60079-1;
EN 61241-0; EN 61242-1
ГОСТ Р 51330.9-99 (МЭК 660079-10-95)
ГОСТ Р 51330.13-99 (МЭК 660079-14-96)
ГОСТ Р МЭК 61241-3-99
EN 60079-0; EN 60079-1;
EN 61241-0; EN 61242-1
PROTECTION DEGREE
CERTIFICATE REF.
RULES OF COMPLIANCE
LIGHTING FIXTURES WITH
EMERGENCY UNIT ONLY
58W LIGHTING FIXTURE
ATEX 94/9/EC
GOST-R (RTR / RTN)
II 2 G Ex edq IIC T4
II 2 D Ex tD A21 T 90°C
EXECUTION
AMBIENT TEMPERATURE
-20°C ÷ +55°C
2Ex edq IIC T4 (T6)
DIP A21 TA 90°C
ATEX 94/9/EC
II 2 GD Ex edq IIC T4 T80°C
-20°C ÷ +60°C
-20°C ÷ +60°C
IP66
IP66
IP66/64
PTB 97 ATEX 2225
POCC DE. ГБ05.B01788
PTB 05 ATEX 2066
EN 60079-0; EN 60079-1;
EN 61241-0; EN 61242-1
ГОСТ Р 51330.9-99 (МЭК 660079-10-95)
ГОСТ Р 51330.13-99 (МЭК 660079-14-96)
ГОСТ Р МЭК 61241-3-99
EN 60079-0; EN 60079-1;
EN 61241-0; EN 61242-1
PROTECTION DEGREE
CERTIFICATE REF.
RULES OF COMPLIANCE
-20°C ÷ +55°C
Mechanical characteristics
Body
glass fibre reinforced polyester resin
diffuser
u/v resistant polycarbonate - hinged to body
safety closing
operated by triangular key
gaskets
epdm rubber suitable for high temperatures and resistant to enviroments conditions
internal reflector
white polyester highly refractor diffuser
cable entry
iso-metric thread c/w plastic cable glands and stopping plug
Electrical characteristics
Power supply
elettronic ballast 220v/240v - 50/60hz (p.f.corrected - cos ρ ≥ 0,98)
lampholders
bi-pin g13 cap
internal wiring
high-temperature resistant silicon rubber insulation cables
terminals
suitable up to 6mm/sq cables
safety feature
emergency unit
“end of life” switching-off system in according to en 60079-7 rules
emergency unit composed of inverter charger and ni-cd battery pack 7a/h 6v
autonomy up to 180 min.
advantages
see table “advantage features”
On Request Accessories:
•Pole mounting kit complete with stainless steel hardware
•Ceiling mounting kit complete with stainless steel hardware
•Pendant mounting kit complete with stainless steel hardware
•Wall/Structure mounting kit complete with stainless steel hardware
•Electronic ballast with voltage supply different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 33
EVG
Ex Lighting

34. Ex Lighting
EVG Technical data
LAMP
EVG
CODE
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
CABLE ENTRY
EMERGENCY
UNIT
AUTONOMY
DETAIL
FLUORESCENT LIGHTING FIXTURES FOR SINGLE AND TWIN LAMPS - POWER SUPPLY 230V-50/60Hz
SH-21EVG
1 x 18W
T4 (Ta = -20°C / +60°C)
T 80°C (Ta = -20°C / +60°C)
G13
3 x ISO-M25
-
-
A
SH-41EVG
1 x 36W
T4 (Ta = -20°C / +60°C)
T 80°C (Ta = -20°C / +60°C)
G13
3 x ISO-M25
-
-
A
SH-61EVG
1 x 58W
T4 (Ta = -20°C / +60°C)
T 90°C (Ta = -20°C / +60°C)
G13
3 x ISO-M25
-
-
A
SH-22EVG
2 x 18W
T4 (Ta = -20°C / +60°C)
T 80°C (Ta = -20°C / +60°C)
G13
3 x ISO-M25
-
-
A
SH-42EVG
2 x 36W
T4 (Ta = -20°C / +60°C)
T 80°C (Ta = -20°C / +60°C)
G13
3 x ISO-M25
-
-
A
SH-62EVG
2 x 58W
T4 (Ta = -20°C / +60°C)
T 90°C (Ta = -20°C / +60°C)
G13
3 x ISO-M25
-
-
A
EMERGENCY FLUORESCENT LIGHTING FIXTURES FOR SINGLE AND TWIN LAMPS - POWER SUPPLY 230V-50/60Hz
SH-22EVG-E
2 x 18W
T4 (Ta = -20°C / +60°C)
T 80°C (Ta = -20°C / +60°C)
G13
2 x ISO-M25
6 V - 7 A/h
3h
B
SH-42EVG-E
2 x 36W
T4 (Ta = -20°C / +60°C)
T 80°C (Ta = -20°C / +60°C)
G13
2 x ISO-M25
6 V - 7 A/h
3h
B
EVG Technical features
CODE
A [mm]
B [mm]
C [mm]
D [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
SH-21EVG
786
160
214
600
10,00
3 x ISO-M25
A
SH-41EVG
1355
150
226
716
13,00
3 x ISO-M25
A
SH-61EVG
1696
160
214
800
16,00
3 x ISO-M25
A
SH-22EVG
786
160
214
600
10,50
3 x ISO-M25
A
SH-42EVG
1355
150
226
716
13,50
3 x ISO-M25
A
SH-62EVG
1696
160
214
800
16,50
3 x ISO-M25
A
SH-22EVG-E
913
160
221
600
9,40
2 x ISO-M25
B
SH-42EVG-E
1523
160
221
800
12,80
2 x ISO-M25
B
Reference details
A
B
D
C
A
B
B
D
C
A
Since 1961
34 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

35. Ex Lighting
EVG Installation and mounting details
type 1
type 2
Wall/structure mounting
type 3
type 4
00
Pendant mounting
EVG
Ceiling mounting
Pole mounting
Assemblig detail with pole (typical)
1
50
100
45°
EVG Polar diagrams – photometric data
SH-21EVG
SH-22EVG
SH-41EVG
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 35

36. Ex Lighting
EVG Polar diagrams – photometric data
SH-61EVG
SH-62EVG
EVG
SH-42EVG
EVG with emergency unit
LIGHTING FIXTURES AND EMERGENCY UNIT ELECTRICAL DESIGN AND SPECIAL FEATURES
Microprocessor (plc)
“end-of life” switching-off system at the end of life a fluorescent tube lamp is safely switched off
(according to iec en-60079-7 stds)
Multi-function led
multi-function led indcator with coded indication of the functions, status and potential failures of the
electronic device and of the batteries
Monitoring
special signal whenever there is a e.o.l. situation (led red flashing )
automatic weekly functions test
automatic annual 2/3 times operating period test
function and operating period test can be done manually also
Maintenance
quick replacement of battery set even in explosive atmosphere presence
electrical disconnection whenever the batteries box is opened
24h max recharging time (in according to en-60598-2-22)
Safety
Highest degree of safety in case of lamp failure during the emergency light operation
In case of lamp failure during emergency operation the second tube lamp will automatically take over the
emergency operation (two lamps version only)
EVG On request accessories
CODE
DESCRIPTION
INSTALLATION
MATERIAL
20301.0162
POLE MOUNTING KIT (SIZE 2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20301.0163
POLE MOUNTING KIT (SIZE 1 1/2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20301.0165
PENDANT MOUNTING KIT C/W HARDARE AND EYE-BOLTS
TYPE 2
STAINLESS STEEL
20302.0121
CEILING MOUNTING KIT C/W HARDWARE
TYPE 1
GALVANIZED STEEL
20302.0128
WALL/STRUCTURE MOUNTING KIT C/W HARDWARE
TYPE 3
GALVANIZED STEEL
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
36 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

37. FLUORESCENT LIGHTING
FIXTURES FOR CEILING
OR RECESSED INSTALLATION
Ex Lighting
e191 - e192
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
LIGHTING FIXTURE
ATEX 94/9/EC
II 2G Ex edq IIC T4
II 2D Ex tD A21 T 80°C
EXECUTION
AMBIENT TEMPERATURE
GOST-R (RTR / RTN)
2Ex edq IIC T4, 2Ex eq II T4,
DIP A21 TA 80°C
-20°C ÷ +60°C (e191… - e192... surface/recessed in suspend. ceiling)
-20°C ÷ +50°C (e191… recessed mount. insulated)
-20°C ÷ +40°C (e192... recessed mount. insulated)
PROTECTION DEGREE
-20°C ÷ +40°C
IP65
IP65
IBExU 04 ATEX 1062
POCC DE. ГБ05.B01788
EN 50014 +A1 +A2; EN 50017; EN 50018;
EN 50019; EN 50281-1-1
ГОСТ Р 51330.9-99 (МЭК 660079-10-95)
ГОСТ Р 51330.13-99 (МЭК 660079-14-96)
ГОСТ Р МЭК 61241-3-99
CERTIFICATE REF.
RULES OF COMPLIANCE
Mechanical characteristics
Body
sheet steel white coloured ral 9016
diffuser
safety toughened impact resistant tempered glass hinged to body
safety closing
central locking system operated by 5mm allen key - hinges on opposite side
gaskets
epdm rubber suitable for high temperatures and resistant to enviroments conditions
internal reflector
high anodized purest aluminium
cable entry
iso-metric thread c/w plastic cable glands and stopping plug
Electrical characteristics
Power supply
dual channel elettronic ballast 220v/240v-50/60hz (p.f.corrected - cos ρ ≥ 0,98) - DC
lampholders
bi-pin g13 cap
internal wiring
high-temperature resistant silicon rubber insulation cables
terminals
suitable up to 6mm/sq cables
isolating switch
switching off all poles when lighting fitting is opened showing the actual position by optical indicator
Safety feature
“END OF LIFE” switching-off system in according to EN 60079-7 rules
On Request Accessories:
•Recessed mounting kit EB182 series complete with stainless steel hardware
•Stainless steel sheet body
•Electronic ballast with voltage supply different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 37
e191- e192
Explosion Proof Electrical Equipment

38. e191 - e192 Technical data
CODE
TEMPERATURE CLASS
(GAS)
LAMP
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
CABLE ENTRY
DETAIL
FLUORESCENT LIGHTING FIXTURES - POWER SUPPLY 220-240V-50/60Hz - DC
e19121
1 x 18W
T4 (Ta = -20°C ÷ 40/50/60°C)
T 80°C (Ta = -20°C / +60°C)
G13
3 x ISO-M25
A
e19122
2 x 18W
T4 (Ta = -20°C ÷ 40/50/60°C)
T 80°C (Ta = -20°C / +60°C)
G13
3 x ISO-M25
A
e19141
1 x 36W
T4 (Ta = -20°C ÷ 40/50/60°C)
T 80°C (Ta = -20°C / +60°C)
G13
3 x ISO-M25
A
e19142
2 x 36W
T4 (Ta = -20°C ÷ 40/50/60°C)
T 80°C (Ta = -20°C / +60°C)
G13
3 x ISO-M25
A
e19161
1 x 58W
T4 (Ta = -20°C ÷ 40/50/60°C)
T 80°C (Ta = -20°C / +60°C)
G13
3 x ISO-M25
A
e19162
2 x 58W
T4 (Ta = -20°C ÷ 40/50/60°C)
T 80°C (Ta = -20°C / +60°C)
G13
3 x ISO-M25
A
e19223
3 x 18W
T4 (Ta = -20°C ÷ 40/50/60°C)
T 80°C (Ta = -20°C / +60°C)
G13
3 x ISO-M25
A
e19224
4 x 18W
T4 (Ta = -20°C ÷ 40/50/60°C)
T 80°C (Ta = -20°C / +60°C)
G13
3 x ISO-M25
A
e19243
3 x 36W
T4 (Ta = -20°C ÷ 40/50/60°C)
T 80°C (Ta = -20°C / +60°C)
G13
3 x ISO-M25
A
e19244
4 x 36W
T4 (Ta = -20°C ÷ 40/50/60°C)
T 80°C (Ta = -20°C / +60°C)
G13
3 x ISO-M25
A
e19263
3 x 58W
T4 (Ta = -20°C ÷ 40/50/60°C)
T 80°C (Ta = -20°C / +60°C)
G13
3 x ISO-M25
A
e19264
4 x 58W
T4 (Ta = -20°C ÷ 40/50/60°C)
T 80°C (Ta = -20°C / +60°C)
G13
3 x ISO-M25
A
e191 - e192 Lighting fixture technical features
CODE
A [mm]
B [mm]
C [mm]
D [mm]
E [mm]
WEIGHT [Kg] CABLE ENTRY
DETAIL
e19121
720
82
368
600
404
10,00
3 x ISO-M25
A
e19122
720
82
368
600
404
10,00
3 x ISO-M25
A
e19141
1330
82
368
1200
404
15,50
3 x ISO-M25
A
e19142
1330
82
368
1200
404
15,50
3 x ISO-M25
A
e19161
1630
82
368
1400
404
18,00
3 x ISO-M25
A
e19162
1630
82
368
1400
404
18,00
3 x ISO-M25
A
e19223
720
82
500
600
536
18,50
3 x ISO-M25
A
e19224
720
82
500
600
536
18,50
3 x ISO-M25
A
e19243
1330
82
500
1200
536
25,50
3 x ISO-M25
A
e19244
1330
82
500
1200
536
25,50
3 x ISO-M25
A
e19263
1630
82
500
1400
536
28,50
3 x ISO-M25
A
e19264
1630
82
500
1400
536
28,50
3 x ISO-M25
A
Lighting fixture Reference details
A
E
Ø9
D
B
e191- e192 e192
e191-
Ex Lighting
C
A
Since 1961
38 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

39. e191 - e192 Recessed frame technical features
CODE
LUMINARIE TYPE
EB182-18
e19121
388
740
786
93
300
434
82
9
e19122
388
740
786
93
300
434
82
9
EB182-36
e19141
388
1350
1396
98
400
434
82
9
e19142
388
1350
1396
98
400
434
82
9
e19161
388
1650
1696
48
400
434
82
9
EB182-58
A [mm]
B [mm]
C [mm]
D [mm]
E [mm]
F [mm]
G [mm]
H [mm]
e19162
388
1650
1696
48
400
434
82
9
EB192-18
e19223
520
740
786
93
300
566
82
9
e19224
520
740
786
93
300
566
82
9
EB192-36
e19243
520
1350
1396
96
400
566
82
9
e19244
520
1350
1396
96
400
566
82
9
EB192-58
e19263
520
1650
1696
48
400
566
82
9
e19264
520
1650
1696
48
400
566
82
9
Recessed frame Reference details
B
G
A
H
F
C
D
E
E
E
D
e191 - e192 Polar diagrams – photometric data
e191-42
e192-43
e192-44
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 39
e191- e192
Ex Lighting

40. e191- e192
Ex Lighting
e191 - e192 Polar diagrams – photometric data
e191-22
e191-23
e191-64
e191 - e192 On request accessories
CODE
DESCRIPTION
MATERIAL
EB182-18
RECESSED FRAME FOR LIGHTING FIXTURE 1x18W AND 2x18W
PAINTED SHEET STEEL
EB182-36
RECESSED FRAME FOR LIGHTING FIXTURE 1x36W AND 2x36W
PAINTED SHEET STEEL
EB182-58
RECESSED FRAME FOR LIGHTING FIXTURE 1x58W AND 2x58W
PAINTED SHEET STEEL
EB192-18
RECESSED FRAME FOR LIGHTING FIXTURE 3x18W AND 4x18W
PAINTED SHEET STEEL
EB192-36
RECESSED FRAME FOR LIGHTING FIXTURE 3x36W AND 4x36W
PAINTED SHEET STEEL
EB192-58
RECESSED FRAME FOR LIGHTING FIXTURE 3x58W AND 4x58W
PAINTED SHEET STEEL
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics showed
on this bulletin can be considered as binding on our confirmation only.
Since 1961
40 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

41. INCREASED SAFETY LIGHTING
FIXTURES FOR BI-PIN
FLUORESCENT LAMPS
Explosion Proof Electrical Equipment
AVF
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
LIGHTING FIXTURE
ATEX 94/9/EC
GOST-R (RTR / RTN)
GOST-K
2Ex ed IIC T5
DIP A21 TA 70°C
2Ex ed IIC T5
DIP A21 TA 70°C
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
IP66
IP66
IP66
KEMA 01 ATEX 2069
POCC IT. ГБ05.B02536
No. 07/43-269
EN 60079-0; EN 60079-1;
EN 60079-7; EN 61241-1
ГОСТ Р 51330.9-99 (МЭК 60079-10-95)
ГОСТ Р 51330.13-99 (МЭК 60079-14-96)
ГОСТ Р МЭК 61241-3-99
ГОСТ Р 51330.0 / 1 / 8 / 14-99
ГОСТ Р МЭК 61241-1-1-2002
II 2 G Ex ed IIC T5
II 2 D Ex tD A21 T70°C
EXECUTION
INSTALLATION
PROTECTION DEGREE
CERTIFICATE REF.
RULES OF COMPLIANCE
EMERGENCY UNIT
ATEX 94/9/EC
GOST-R (RTR / RTN)
GOST-K
1Ex ed IIB T6
DIP A21 TA 85°C
1Ex ed IIB T6
DIP A21 TA 85°C
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
IP66
IP66
IP66
IMQ 08 ATEX 026X
POCC IT. ГБ05.B02537
No. 07/43-269
EN 60070-0; EN 60079-7;
EN 61241-0; EN 61241-1;
ГОСТ Р 51330.9-99 (МЭК 60079-10-95)
ГОСТ Р 51330.13-99 (МЭК 60079-14-96)
ГОСТ Р МЭК 61241-3-99
ГОСТ Р 51330.0 / 1 / 8 / 14-99
ГОСТ Р МЭК 61241-1-1-2002
II 2 G Ex ed IIC T6
II 2 D Ex tD A21 T85°C
EXECUTION
INSTALLATION
PROTECTION DEGREE
CERTIFICATE REF.
RULES OF COMPLIANCE
Mechanical characteristics
Body
galss fibre reinforced polyester resin self-extinguishing acc. to UL94
Diffuser
U/V resistant polycarbonate - hinged to body
Safety closing
operated by hexagonal key
Gaskets
EPDM 60 rubber suitable for high temperatures and resistant to enviroments conditions
Internal reflector
white stove enamelled sheet aluminum
Cable entry
ISO-Metric complete with cable glands and plug
Electrical characteristics
Power supply
elettronic ballast 220V/240V 50/60Hz (p.f. corrected - cos ρ ≥ 0,98)
Lampholders
bi-pin G13 cap
Internal wiring
high-temperature resistant silicon rubber insulation cables
Terminals
suitable up to 6mm/sq cables
Safety feature
EEx de safety switch
On Request Accessories:
• Pole mounting kit complete with stainless steel hardware
• Ceiling mounting kit complete with stainless steel hardware
• Pendant mounting kit complete with stainless steel hardware
• Wall/Structure mounting kit complete with stainless steel hardware
• Electronic ballast with voltage supply different than standard
• AUTOTEST electronic system for emergency unit
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 41
AVF
Ex Lighting

42. Ex Lighting
AVF Technical data
LAMP
AVF
CODE
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
CABLE
ENTRY
LAMPHOLDER
EMERGENCY
UNIT
AUTONOMY
DETAIL
FLUORESCENT LIGHTING FIXTURES FOR SINGLE AND TWIN LAMPS - POWER SUPPLY 230V 50/60Hz
AVF 118
1 x 18W
T5
T 70°C
G13
3 x M20 x 1,5
-
-
A
AVF 136
1 x 36W
T5
T 70°C
G13
3 x M20 x 1,5
-
-
A
AVF 218
2 x 18W
T5
T 70°C
G13
3 x M20 x 1,5
-
-
A
AVF 236
2 x 36W
T5
T 70°C
G13
3 x M20 x 1,5
-
-
A
EMERGENCY FLUORESCENT LIGHTING FIXTURES FOR SINGLE AND TWIN LAMPS - POWER SUPPLY 230V 50/60Hz
AVF 118-E
1 x 18W
T5
T 70°C
G13
2 x M20 x 1,5
4.8 V - 4Ah
3h
B
AVF 136-E
1 x 36W
T5
T 70°C
G13
2 x M20 x 1,5
4.8 V - 4Ah
3h
B
AVF 218-E
2 x 18W
T5
T 70°C
G13
2 x M20 x 1,5
4.8 V - 4Ah
3h
B
AVF 236-E
2 x 36W
T5
T 70°C
G13
2 x M20 x 1,5
4.8 V - 4Ah
3h
B
AVF Technical features
A [mm]
B [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
AVF 118
CODE
730
215
160
400
6,00
3 x M20 x 1,5
A
AVF 136
1340
215
160
450
6,50
3 x M20 x 1,5
A
AVF 218
730
215
160
400
7,00
3 x M20 x 1,5
A
AVF 236
1340
215
160
450
7,50
3 x M20 x 1,5
A
CODE
C [mm]
C [mm]
D [mm]
A [mm]
B [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
AVF 118-E
925
215
280
D [mm]
400
11,00
2 x M20 x 1,5
B
AVF 136-E
1535
215
280
450
11,50
2 x M20 x 1,5
B
AVF 218-E
925
215
280
400
12,00
2 x M20 x 1,5
B
AVF 236-E
1535
215
280
450
12,50
2 x M20 x 1,5
B
Reference details
A
8MA
D
8MA
C
8MA
B
B
A
8MA
D
8MA
C
8MA
B
A
Since 1961
42 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

43. Ex Lighting
AVF Installation and mounting details
Ceiling mounting
Pendant mounting
type 2
Wall/structure mounting
type 3
type 4
0
10
AVF
type 1
Pole mounting
Assemblig detail with pole (typical)
50
100
45°
AVF Polar diagrams – photometric data
AVF218
AVF136
AVF236
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 43

44. Ex Lighting
AVF with emergency unit (design and special features)
AVF
GENERALITY:
The controller unit system permits to manage in AUTOTEST the verify of emergency unit working
This system allows the emergency working of every fluorescent tube lamps (NON maintened working)
The check and the control system has been realized by proper microprocessor which perform the following tests :
- continuous test on the battery charger working, on the operation of the battery, and on presence of voltage supply
- duration test in emergency working (every 3 months) with check of battery charge
- test of emergency working (weekly) with check of right lamp operation
Every information concerning the checks can be managed singly or tranmitted by “remote control system” in order to manage complete
illumination system test in centralized way.
Multicolor LED indicator in standard working (continuous led light)
ON
ON
ON
ON
ON
ON
ON
ON
ON
Regular operation
ON
ON
ON
ON
ON
ON
ON
ON
ON
Failed battery performance check
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Lack of main power supply
ON
ON
ON
OFF
ON
ON
ON
OFF
ON
Lack of battery
Multicolor LED indicator during test opetarion (intermittent led light)
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
Performing lamp test
ON
ON
OFF
ON
ON
OFF
ON
ON
OFF
Performing battery pack test
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
Failed lamp test
Multicolor LED indicator during batteries recharging phase
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
24 hours
ON
ON
ON
ON
ON
ON
ON
ON
ON
After 24 hours
AVF On request accessories
CODE
DESCRIPTION
INSTALLATION
MATERIAL
20301.0162
POLE MOUNTING KIT (SIZE 2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20301.0163
POLE MOUNTING KIT (SIZE 1 1/2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20301.0165
PENDANT MOUNTING KIT C/W HARDARE AND EYE-BOLTS
TYPE 2
STAINLESS STEEL
20302.0121
CEILING MOUNTING KIT C/W HARDWARE
TYPE 1
GALVANIZED STEEL
20302.0128
WALL/STRUCTURE MOUNTING KIT C/W HARDWARE
TYPE 3
GALVANIZED STEEL
AUTOTEST electronic system
-
-
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
44 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

45. Explosion Proof Electrical Equipment
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
Ex Lighting
SFDQL
FLOODLIGHT
ATEX 94/9/EC
II 2G Ex eq II T3
II 2D Ex tD A21 T 200°C
EXECUTION
-40°C ÷ +40°C
-40°C ÷ +60°C
AMBIENT TEMPERATURE
PROTECTION DEGREE
IP66
CERTIFICATE REF.
IMQ 09 ATEX 014X
RULES OF COMPLIANCE
EN 60079-0; EN 60079-5; EN 60079-7;
EN 61241-0; EN 61241-1
Mechanical characteristics
Body
marine grade copper free aluminum
Diffuser
tempered front glass
Support
steel bracket with rotation-proof system
Reflector
anodized and polished 99,85 pure aluminum internal optic
Painting
thermosetting polyester powder resistant to atmospheric agents and corrosion grey RAL 9006 colour
Screws
stainless steel
Gaskets
pure silicon heat resistance
Cable entry
iso-Metric complete with nikel plated brass cable gland M20
Electrical characteristics
Power supply
180 ÷ 230V DC / 180 ÷ 277V AC x 165W - 55W - 85W
Lamp
long life induction lamp (60.000 hours)
Terminals
suitable up to 4mm/sq cables
On Request Accessories:
•Power supply 90 ÷ 120V AC/DC (55/85W only)
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 45
SFDQL
FLOODLIGHT PROJECTORS
FOR INDUCTION LAMPS

46. Ex Lighting
SFDQL
SFDQL Technical data
CODE
TEMPERATURE CLASS
(GAS)
LAMP
TEMPERATURE CLASS
(DUSTS)
CABLE ENTRY SIZE
DETAIL
FLOODLIGHT FOR INDUCTION LAMP - POWER SUPPLY 220V/240V 50/60Hz - 220V/240V DC - 120V AC/DC
SFDQL-55JB
55W
T3 (Ta = -40°C / +60°C)
T 200°C
2 x ISO M20
A
SFDQL-85JB
85W
T3 (Ta = -40°C / +60°C)
T 200°C
2 x ISO M20
A
SFDQL-55
55W
T3 (Ta = -40°C / +60°C)
T 200°C
1 x PCE M20
B
SFDQL-85
85W
T3 (Ta = -40°C / +60°C)
T 200°C
1 x PCE M20
B
FLOODLIGHT FOR INDUCTION LAMP - POWER SUPPLY 220V/240V 50/60Hz - 220V/240V DC
SFDQL-165JB
165W
T3 (Ta = -40°C / +40°C)
T 200°C
2 x ISO M20
A
SFDQL-165
165W
T3 (Ta = -40°C / +40°C)
T 200°C
1 x PCE M20
B
WEIGHT [Kg]
CABLE ENTRY
DETAIL
SFDQL Technical features
CODE
A [mm]
B [mm]
C [mm]
D [mm]
SFDQL-55JB
430
460
545
260
8,50
2 x ISO M20
A
SFDQL-85JB
430
460
545
260
8,70
2 x ISO M20
A
SFDQL-165JB
430
460
545
260
9,50
2 x ISO M20
A
SFDQL-55
430
460
545
180
8,00
1 x PCE M20
B
SFDQL-85
430
460
545
180
8,20
1 x PCE M20
B
SFDQL-165
430
460
545
180
9,00
1 x PCE M20
B
Reference details
A
A
D
II 2G Ex eq II T3
II 2D Ex tD A21 IP 66 T200° C
IMQ 08 ATEX 014X
www.feam-ex.com
INDUCTION LAMP
SFDQL
C
B
0722
55W
85W
165W
55W-85W
Ta -40° C / +60° C
180÷230V DC
180÷277V AC
90÷120V AC/DC
165W
Ta -40° C / +40° C
2 X ISO M20
0°
12
155
155
Since 1961
46 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

47. Ex Lighting
Reference details
B
A
D
II 2G Ex eq II T3
II 2D Ex tD A21 IP 66 T200° C
IMQ 08 ATEX 014X
www.feam-ex.com
INDUCTION LAMP
SFDQL
B
0722
C
55W
85W
165W
55W-85W
Ta -40° C / +60° C
180÷230V DC
180÷277V AC
90÷120V AC/DC
165W
Ta -40° C / +40° C
155
0°
12
1 X PCE M20
155
SFDQL Polar diagrams – photometric data
SFDQL55
SFDQL85
SFDQL165
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 47
SFDQL
SFDQL Technical features

48. Ex Lighting
SFDQL
SFDQL On request accessories
CODE
DESCRIPTION
20303.0099
PROTECTION GRID
20303.0100
MATERIAL
POLE ADAPTER - DIA. 40÷60mm
Protection grid
20303.0099
ALUMINUM
PAINTED STEEL
Pole adapter
20303.0100
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
48 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

49. LIGHTING FIXTURES FOR
FLUORESCENT TUBE LAMPS
Explosion Proof Electrical Equipment
EVSN
Installation: hazardous areas - Zone 2 (Gases) - Zone 22 (Dusts)
Classification: Group II - Category 3G 3D
LIGHTING FIXTURE
EMERGENCY UNIT
ATEX 94/9/EC
ATEX 94/9/EC
II 2 G Ex ed IIC
II 2 D Ex tD A21 T85°C
II 3 G Ex nA II T6/T5
II 3 D Ex tD A22 T85°C/T100°C
EXECUTION
AMBIENT TEMPERATURE
ZONE 2 - ZONE 22
INSTALLATION
-40°C ÷ +55°C
ZONE 1 / 2 - ZONE 21 / 22
PROTECTION DEGREE
IP65
IP66
IMQ 08 ATEX 008X
IMQ 08 ATEX 026X
EN 60079-0; EN 60079-15; EN 61241-0; 61241-1
EN 60070-0; EN 60079-7; EN 61241-0; EN 61241-1
CERTIFICATE REF.
RULES OF COMPLIANCE
Mechanical characteristics
Body
glass fibre reinforced polyester resin
Diffuser
U/V resistant polycarbonate - hinged to body
Safety closing
stainless steel hooks with safety device
Gaskets
EPDM 60 rubber suitable for high temperatures and resistant to enviroments conditions
Internal reflector
white stove enamelled sheet steel
Cable entry
complete with PVC cable gland
Electrical characteristics
Power supply
dual channel electronic ballast 220/240V 50/60Hz (cos ρ ≥ 0,98)
Lampholders
bi-pin G13 cap
Terminals
suitable up to 6mm/sq cables
On Request Accessories:
• Pole mounting kit complete with stainless steel hardware
• Ceiling mounting kit complete with stainless steel hardware
• Pendant mounting kit complete with stainless steel hardware
• Wall/Structure mounting kit complete with stainless steel hardware
• Electronic ballast with voltage supply different than standard
• Ex-de safety switch
• AUTOTEST electronic system for emergency unit
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 49
EVSN
Ex Lighting

50. Ex Lighting
EVSN Technical data
EVSN
CODE
LAMP
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
CABLE ENTRY WITH EMERGENCY
CABLE GLAND
UNIT
AUTONOMY
DETAIL
FLUORESCENT LIGHTING FIXTURES FOR SINGLE AND TWIN LAMPS - POWER SUPPLY 230V-50Hz
T6
T 85°C
EVSN118EL
T5
T100°C
T4
T135°C
1 x 18W
T6
T5
T100°C
1 x PG 13,5
-
-
A
1 x PG 13,5
-
-
A
T 85°C
EVSN136EL
G13
1 x 36W
G1
T4
T135°C
EVSN158EL
T5
T100°C
T6
T 85°C
EVSN218EL
T5
T100°C
T4
T135°C
1 x 58W
2 x 18W
T6
T5
T100°C
1 x PG 13,5
2 x 36W
-
-
-
A
G13
1 x PG 13,5
G13
1 x PG 13,5
-
-
A
G13
1 x PG 13,5
-
-
A
T 85°C
EVSN236EL
G13
-
A
T4
T135°C
EVSN258EL
T5
T100°C
2 x 58W
EMERGENCY FLUORESCENT LIGHTING FIXTURES FOR SINGLE AND TWIN LAMPS - POWER SUPPLY 230V-50Hz
T6
T 85°C
EVSNE118EL
T5
T100°C
T4
T135°C
1 x 18W
T6
T5
4,8V - 4Ah
3h
B
G13
1 x PG 13,5
4,8V - 4Ah
3h
B
G13
1 x PG 13,5
4,8V - 4Ah
3h
B
G13
T100°C
1 x PG 13,5
1 x PG 13,5
4,8V - 4Ah
3h
B
1 x PG 13,5
4,8V - 4Ah
3h
B
G13
1 x PG 13,5
4,8V - 4Ah
3h
B
D [mm]
WEIGHT [Kg]
T 85°C
EVSNE136EL
G13
1 x 36W
T4
T135°C
EVSNE158EL
T5
T100°C
1 x 58W
T6
T 85°C
EVSNE218EL
T5
T100°C
T4
T135°C
T6
T 85°C
EVSNE236EL
T5
T100°C
2 x 18W
2 x 36W
G13
T4
T135°C
T5
EVSNE258EL 2 x 58W
T100°C
EVSN Technical features
CODE
A [mm]
B [mm]
C [mm]
CABLE ENTRY
DETAIL
EVSN118EL
667
90
98
420
1,75
1 x PG 13,5
A
EVSN136EL
1276
90
98
775
2,45
1 x PG 13,5
A
EVSN158EL
1576
90
98
1070
3,10
1 x PG 13,5
A
EVSN218EL
667
155
102
455
2,10
1 x PG 13,5
A
EVSN236EL
1276
155
102
770
3,90
1 x PG 13,5
A
EVSN258EL
1576
155
102
1055
5,20
1 x PG 13,5
A
Reference details
D
C
A
A
B
Since 1961
50 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

51. Ex Lighting
EVSN Technical features
CODE
B [mm]
C [mm]
842
90
120
EVSNE136EL
1451
90
EVSNE158EL
1751
90
EVSNE218EL
842
EVSNE236EL
EVSNE258EL
D [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
420
2,75
1 x PG 13,5
B
120
775
3,45
1 x PG 13,5
B
120
1070
4,10
1 x PG 13,5
B
155
120
455
3,10
1 x PG 13,5
B
1451
155
120
770
4,90
1 x PG 13,5
B
1751
155
120
1055
6,20
1 x PG 13,5
B
Reference details
B
C
D
A
B
EVSN Installation and mounting details
Ceiling mounting
Pendant mounting
type 1
type 2
Wall/structure mounting
type 3
0
10
type 4
Pole mounting
Assemblig detail with pole (typical)
50
100
45°
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 51
EVSN
A [mm]
EVSNE118EL

52. Ex Lighting
EVSN Polar diagrams – photometric data
EVS136
EVS158
EVS218
EVS236
EVS258
EVSN
EVS118
EVSN On request accessories
CODE
DESCRIPTION
INSTALLATION
MATERIAL
20302.0122
POLE MOUNTING KIT (SIZE 1 1/2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20302.0123
POLE MOUNTING KIT (SIZE 2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20302.0125
POLE MOUNTING KIT (SIZE 1” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20301.0165
PENDANT MOUNTING KIT C/W HARDARE AND EYE-BOLTS
TYPE 2
STAINLESS STEEL
20303.0091
CEILING MOUNTING KIT C/W HARDWARE
TYPE 1
GALVANIZED STEEL
20303.0092
WALL/STRUCTURE MOUNTING KIT C/W HARDWARE
TYPE 3
GALVANIZED STEEL
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
52 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

53. FLOODLIGHTS
FOR DISCHARGE LAMPS
Explosion Proof Electrical Equipment
Installation: hazardous areas - Zone 2 (Gases) - Zone 22 (Dusts)
Classification: Group II - Category 3G 3D
SFDN
FLOODLIGHT
ATEX 94/9/EC
II 3 G Ex nR II T3
II 3 D Ex tD A22 T200°C
EXECUTION
AMBIENT TEMPERATURE
-20°C ÷ +60°C
PROTECTION DEGREE
IP66
CERTIFICATE REF.
IMQ 08 ATEX 019
RULES OF COMPLIANCE
EN 60079-0; EN 60079-15; EN 61241-0; 61241-1
Mechanical characteristics
Body
marine grade copper free aluminum
Diffuser
tempered front glass
Support
steel bracket with rotation-proof system
Reflector
anodized and polished 99,85 pure aluminum internal optic
Painting
thermosetting polyester powder resistant to atmospheric agents and corrosion grey RAL 9006 colour
Screws
stainless steel
Gaskets
pure silicon heat resistance
Cable entry
complete with cable gland
Internal optic
(S) symmetric optic - (A)asymmetric optic - (C) concentrating beam optic
Electrical characteristics
Power supply
conventional ballast 230V - 50Hz (P.F. CORRECTED - cos ρ ≥ 0,95)
Lampholders
porcellain E40 / E27 size
Internal wiring
high-temperature resistant silicon rubber insulation cables
Terminals
suitable up to 4mm/sq cables
On Request Accessories:
• Control gear with voltage supply different than standard
• Threaded cable entry different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 53
SFDN
Ex Lighting

54. Ex Lighting
SFDN
SFDN Technical data
CODE
LAMP
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
SIZE
CABLE ENTRY WITH
CABLE GLAND
DETAIL
FLOODLIGHT FOR HIGH PRESSURE MERCURY VAPOUR LAMP - POWER SUPPLY 230V 50Hz
SFDN#250HG-(1)
250 W
T3 (Ta = -20°C / +60°C)
T 200°C
E-40
1 x PCE M20
A
SFDN#400HG-(1)
400 W
T3 (Ta = -20°C / +60°C)
T 200°C
E-40
1 x PCE M20
A
FLOODLIGHT FOR METAL HALIDE LAMP - POWER SUPPLY 230V 50Hz
SFDN#150MH-(1)
150 W
T3 (Ta = -20°C / +60°C)
T 200°C
E-27
1 x PCE M20
A
SFDN#250MH-(1)
250 W
T3 (Ta = -20°C / +60°C)
T 200°C
E-40
1 x PCE M20
A
SFDN#400MH-(1)
400 W
T3 (Ta = -20°C / +60°C)
T 200°C
E-40
1 x PCE M20
A
FLOODLIGHT FOR HIGH PRESSURE SODIUM LAMP - POWER SUPPLY 230V 50Hz
SFDN#150HPNA-(1)
150 W
T3 (Ta = -20°C / +60°C)
T 200°C
E-40
1 x PCE M20
A
SFDN#250HPNA-(1)
250 W
T3 (Ta = -20°C / +60°C)
T 200°C
E-40
1 x PCE M20
A
SFDN#400HPNA-(1)
400 W
T3 (Ta = -20°C / +60°C)
T 200°C
E-40
1 x PCE M20
A
(1) INTERNAL OPTICAL BEAM: (S) SYMMETRIC BEAM - (A) ASYMMETRIC BEAM - (C) CONCENTRATING BEAM
SAMPLE: SFDN#400MH-S = FLOODLIGHT 400W METAL HALIDE WITH SYMMETRIC OPTICAL BEAM
SFDN Technical features
CODE
A [mm]
B [mm]
C [mm]
D [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
SFDN#250HG-(1)
544
461
430
180
8,80
1 x PCE M20
A
SFDN#400HG-(1)
544
461
430
180
9,10
1 x PCE M20
A
SFDN#150MH-(1)
544
461
430
180
9,50
1 x PCE M20
A
SFDN#250MH-(1)
544
461
430
180
9,70
1 x PCE M20
A
SFDN#400MH-(1)
544
461
430
180
11,00
1 x PCE M20
A
SFDN#150HPNA-(1)
544
461
430
180
10,50
1 x PCE M20
A
SFDN#250HPNA-(1)
544
461
430
180
11,10
1 x PCE M20
A
SFDN#400HPNA-(1)
544
461
430
180
12,30
1 x PCE M20
A
(1) INTERNAL OPTICAL BEAM: (S) SYMMETRIC BEAM - (A) ASYMMETRIC BEAM - (C) CONCENTRATING BEAM
SAMPLE: SFDN#400MH-S = FLOODLIGHT 400W METAL HALIDE WITH SYMMETRIC OPTICAL BEAM
Since 1961
54 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

55. Ex Lighting
Reference details
A
D
C
www.feam-ex.com
FLOODLIGHT TYPE
SFDN
150W HPNA
250W HPNA
400W HPNA
230V 50Hz
240V 50HZ
SM
AS
CT
150W MH
250W MH
400W MH
220V 60Hz
277 60Hz
B
0.206m˛
IK10
Ex nR II T3
Ex tD A22 IP 66 T200°C
A
II 3 GD
IMQ 09 ATEX 019
Tamb -20° C / +60° C
TOGLIERE TENSIONE PRIMA DI APRIRE
DO NOT OPEN WHILE ENERGIZED
0°
12
155
155
SFDN Polar diagrams – photometric data
SFDN#250HPNA-S
SFDN#250HPNA-A
SFDN#250HPNA-C
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 55
SFDN
SFDN Technical features

56. Ex Lighting
SFDN
SFDN Polar diagrams – photometric data
SFDN#400MH-S
SFDN#400MH-A
SFDN#400MH-C
SFDN On request accessories
CODE
DESCRIPTION
20303.0099
PROTECTION GRID
20303.0100
MATERIAL
POLE ADAPTER FOR DIA 40÷60MM
Protection grid
20303.0099
ALUMINIUM
PAINTED STEEL
Pole adapter
20303.0100
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
56 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

57. Explosion Proof Electrical Equipment
Weatherproof Lighting
EVSA
Installation: Safe Area
Insulation Class: I
LIGHTING FIXTURE
CEI / EN
EXECUTION
INDUSTRIAL WEATHERPROOF
AMBIENT TEMPERATURE
-
PROTECTION DEGREE
IP65
CERTIFICATE REF.
-
RULES OF COMPLIANCE
EN 60598-1 + A1; EN 60598-2-1
Mechanical characteristics
Body
glass fibre reinforced polyester resin
Diffuser
U/V resistant polycarbonate - hinged to body
Safety closing
stainless steel hooks
Gaskets
EPDM 60 rubber suitable for high temperatures and resistant to enviroments conditions
Internal reflector
white stove enamelled sheet steel
Cable entry
complete with PVC cable gland
Electrical characteristics
Power supply
dual channel electronic ballast 220/240V 50/60Hz (cos ρ ≥ 0,98)
Lampholders
bi-pin G13 cap
Terminals
suitable up to 6mm/sq cables
On Request Accessories:
• Pole mounting kit complete with stainless steel hardware
• Ceiling mounting kit complete with stainless steel hardware
• Pendant mounting kit complete with stainless steel hardware
• Wall/Structure mounting kit complete with stainless steel hardware
• Electronic ballast with voltage supply different than standard
• Emergency Group
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 57
EVSA
WEATHERPROOF FLUORESCENT
LIGHTING FIXTURES

58. Weatherproof Lighting
EVSA Technical data
EVSA
CODE
TEMPERATURE CLASS
(GAS)
LAMP
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
CABLE ENTRY
WITH CABLE
GLAND
EMERGENCY
UNIT
AUTONOMY
DETAIL
FLUORESCENT LIGHTING FIXTURES FOR SINGLE AND TWIN LAMPS - POWER SUPPLY 230V-50Hz
EVSA118EL
1 x 18W
-
-
G13
1 x PG 13,5
-
-
A
EVSA136EL
1 x 36W
-
-
G13
1 x PG 13,5
-
-
A
EVSA158EL
1 x 58W
-
-
G13
1 x PG 13,5
-
-
A
EVSA218EL
2 x 18W
-
-
G13
1 x PG 13,5
-
-
A
EVSA236EL
2 x 36W
-
-
G13
1 x PG 13,5
-
-
A
EVSA258EL
2 x 58W
-
-
G13
1 x PG 13,5
-
-
A
EMERGENCY FLUORESCENT LIGHTING FIXTURES FOR SINGLE AND TWIN LAMPS - POWER SUPPLY 230V-50Hz
EVSA118EL-E
1 x 18W
-
-
G13
1 x PG 13,5
4,8V - 4Ah
3h
A
EVSA136EL-E
1 x 36W
-
-
G13
1 x PG 13,5
4,8V - 4Ah
3h
A
EVSA158EL-E
1 x 58W
-
-
G13
1 x PG 13,5
4,8V - 4Ah
3h
A
EVSA218EL-E
2 x 18W
-
-
G13
1 x PG 13,5
4,8V - 4Ah
3h
A
EVSA236EL-E
2 x 36W
-
-
G13
1 x PG 13,5
4,8V - 4Ah
3h
A
EVSA258EL-E
2 x 58W
-
-
G13
1 x PG 13,5
4,8V - 4Ah
3h
A
EVSA Technical features
CODE
A [mm]
B [mm]
C [mm]
D [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
EVSA118EL
667
90
98
420
1,75
1 x PG 13,5
A
EVSA136EL
1276
90
98
775
2,45
1 x PG 13,5
A
EVSA158EL
1576
90
98
1070
3,10
1 x PG 13,5
A
EVSA218EL
667
155
102
455
2,10
1 x PG 13,5
A
EVSA236EL
1276
155
102
770
3,90
1 x PG 13,5
A
EVSA258EL
1576
155
102
1055
5,20
1 x PG 13,5
A
A [mm]
B [mm]
C [mm]
D [mm]
CODE
EVSA118EL-E
667
90
98
WEIGHT [Kg]
CABLE ENTRY
DETAIL
420
1,75
1 x PG 13,5
A
EVSA136EL-E
1276
90
98
775
2,45
1 x PG 13,5
A
EVSA158EL-E
1576
90
98
1070
3,10
1 x PG 13,5
A
EVSA218EL-E
667
155
102
455
2,10
1 x PG 13,5
A
EVSA236EL-E
1276
155
102
770
3,90
1 x PG 13,5
A
EVSA258EL-E
1576
155
102
1055
5,20
1 x PG 13,5
A
Reference details
A
C
D
A
B
Since 1961
58 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY

59. Weatherproof Lighting
EVSA Installation and mounting details
Ceiling mounting
Pendant mounting
type 2
Wall/structure mounting
type 3
type 4
00
EVSA
type 1
Pole mounting
Assemblig detail with pole (typical)
1
50
100
45°
EVSA Polar diagrams – photometric data
EVS118
EVS136
EVS158
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 01 - 59

60. Weatherproof Lighting
EVSA Polar diagrams – photometric data
EVS236
EVSA
EVS218
EVS258
EVSA On request accessories
CODE
DESCRIPTION
INSTALLATION
MATERIAL
20302.0122
POLE MOUNTING KIT (SIZE 1 1/2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20302.0123
POLE MOUNTING KIT (SIZE 2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20302.0125
POLE MOUNTING KIT (SIZE 1” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20301.0165
PENDANT MOUNTING KIT C/W HARDARE AND EYE-BOLTS
TYPE 2
STAINLESS STEEL
20303.0091
CEILING MOUNTING KIT C/W HARDWARE
TYPE 1
GALVANIZED STEEL
20303.0092
WALL/STRUCTURE MOUNTING KIT C/W HARDWARE
TYPE 3
GALVANIZED STEEL
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
60 - Feam Catalogue 01
YOUR PARTNER FOR SAFETY