1. Shrihari Bidarkundi
Mobile No: 9035332608 E-mail: haribidarkundi@gmail.com
Professional
Synopsis:
Current Employer:
Previous Employer:
5.9 years of Experience in the field of Solar Power Plants, Control & Instrumentation,
Commissioning and Maintenance of Electrical Equipments.
BHEL (Bharat Heavy Electricals Limited) - Electronics Division, Bangalore.
Designation: PROJECT SUPERVISOR
Duration: April 23rd
, 2014 – Till Date
Dept.: SC & PV (System Engineering )
Operation and maintenance of 66kV switch yard.
Involved in Design and O & M activities at 15MW Solar Power Plants
Installation of PCU’S ( Power Conditioning Units)
Verifications of As Build Drawings and Electrical Drawings at sites.
QC Inspection and verification of LT, HT and Control Cables.
Inspection of LA (Lightning Arresters).
Inspection on Fixed, Seasonal, and Single axis tracking system of solar panels at
sites.
Verification of SCADA communication between PLC, Transformers, PCU, SMB,
Solar Insolation and Weather monitoring station.
Erection, commissioning and maintenance of 66/11 KV of 12.5MVA and 6.3MVA
Transformers.
Erection and commissioning of Nitrogen Fire Protection system for Power
transformers.
Commissioning, testing and coordination with Numerical Relays (IED’s).
Design and installation of HT & LT Panels.
Witnessing and issuing of Work Completion Certificates to Vendors at projects.
BHEL (Bharat Heavy Electricals Limited) - Electronics Division, Bangalore.
Designation: PROJECT SUPERVISOR
Duration: June 6th
, 2009 – June 5th
, 2013
Dept.: Control Equipments-Production (System Testing)
Involved in Testing and Maintenance of Control Equipment. I was responsible for
conducting Loop test, IR and HV Test, and Functional Performance test and
demonstration of Factory Acceptance Test as per the customer’s quality plan for the
Equipments.
Job profile :
Tested Distributed Control System (DCS), built on MAX DNA and METSO
architecture for TG, SG & BOP functions of power plants. Verified proper
functioning of individual components and functional units of the system as a
part of Functional Performance Test.
Elevated temperature test (oven test) of DCS panel.
Carrying out the functional test of control panels to check signal flow,
2. protection and indication logics as per the single line diagram and P/I logic
diagram.
DCS related Graphics for Power Plants using editing tools.
Experience in Software testing ID-FAN, FD-FAN & AIR FLOW CONTROL.
System & DCS (MAXDNA) Engineering, configuration of Simple and Complex
loops and Generation of Graphics and Logics development.
Experience in setting up and demonstrating LOOP RESPONSE of open loop
binary control system and close loop analog control System using Digital
Oscilloscopes, function generators etc.
Role of responsibilities in the Testing of these DPU based Control panels and
DCS related Graphics for Power Plants.
Carried out testing of Digital Automatic Voltage Regulators for Generators.
Responsible for maintenance of Human Machine Interface (HMI) System for
DCS for various projects.
Attending the FAT (factory acceptance test) of each project to do the changes
or modification as per Customer requirements.
Testing of SCADA systems.
Responsible for carrying Factory Acceptance Test of Load Commutated
Inverters (LCI), also carried out Corona Test.
Tested Gas Turbine Control System GE-Speedtronics (Mark VIe) for Frame 6
Gas Turbine.
Coordination with Consultant for the planning of Electrical Systems, Utilities
Supervise and manage customer engineering and equipments deliverable to
ensure compliance with project standards and specifications.
Reviewing and reporting of the project status.
Troubleshoots plant electrical problems to determine their cause and
recommends options for eliminating such problems. Includes carrying out tests
on equipment.
Planning, Execution, Installation, Testing and Commissioning of Electrical and
Mechanical System. Installation, Testing and Commissioning of various
Machinery.
Coordination with various departments for smooth functioning of the
equipment by feedback and suggestions from them.
Condition Monitoring and Predictive maintenance of critical equipment and
corrective actions to avoid breakdown.
Generating documents on control equipments which includes CRR,
Test report, Instruments used report, Pre and Post Oven Hardware report,
Rework/Rejection report, Function Test report which includes wiring check,
documents used for testing, quality plan, Test instruction no, Logic plans/SLD
no, ATST, Check for cooling of Fan and direction of air flow, Check for door
switch Operations, Bus healthiness & DPU/ BUS Redundancy check, Max net
communication check, healthiness of input/output modules, DPU & Other
modules. Power supply breaker operation check with UV, OV. Console
interconnection, Sequence and Protection Logic, Analog control loop check.
Insulation and High voltage Test.
3. Academic Profile:
BE in Electrical & Electronics Engg.
Institute: Basaveshwara Engineering Collage, Bagalkot
University: VTU Belgaum, Karnataka.
Year of Passing: 2008
Final year Project: “Simulation model for reliability evaluation of wind power in north Karnataka”
Description: This project simulates study for reliability analysis of wind form site of
North Karnataka, India. Weibull distribution is used for the analysis. Power calculation
and reliability evaluation is done through MATLAB software.
Diploma in Electrical & Electronics Engg.
Institute: BVVS Polytechnic Collage, Bagalkot
Year of Passing: 2002
Additional Courses: Certified Automation Engineer (CAE) course from Prolific Systems and Technologies
Pvt. Ltd, Bangalore, in the year March 2009 (3 months) which included
PLC - Allen Bradley ( Micrologix 1000, SLC 5/03)
-Siemens (S7-300 and S7-400)
-GE Fanuc (Versa Max)
SCADA –Wonder ware (in touch version 9.1)
Drives -ABB drives (ACS 150)
DCS - ABB (AC 800F)
Instrumentation.
Personal Information:
Date of Birth : 10 July, 1982
Marital Status : Single
Permanent Address : #12 Cauvery ,Good will apartment
Chandra layout ,Vijayanagar
Bangalore