1. To,
Respected sir,
Subject : Application for the post of :
With reference to your advertisement in------------------------- dated -----------------
I wish to apply for the above mentioned post of :
I have total 18 years of experience as Supervision in the field of blasting and painting. If I am
given an opportunity, I will do my job to the fullest satisfaction of my superiors. I enclosed
herewith my CV/ RESUME for your benign perusal please refers to this and let me know the
further your details if any.
THANKING YOU
Place : Madhavalayam Yours Faithfully,
Date :
M .P. SHAHUL HAMEED.
2. BIO -DATA
Name : M.P. SHAHUL HAMEED
Father’s Name : M. Mydeen Packir Usanar
Date of Birth : 15.05.1965
Sex : Male
Marital Status : Married
Religion : Islam
Nationality : Indian
Educational Qualification : (DME) – Diploma in Mechanical Engineering,
Government Polytechnic, Nagercoil-4,
Kanniyakumari, Tamil Nadu.
Year of Completion : 1984
Additional Qualification : Computer Office Automation (M.S.Office)
Languages Known : Tamil, Malayalam, Hindi, Arabic, and English.
Tamil : Speak, read, and write
Malayalam : Speak
Hindi : Speak
Arabic : Speak
English : Speak, read, and write
Permanent/Communication Address : Door No: 7 / 17, Mosque Street,
Madhavalayam - P.o, Pin: 629302 Kanniyakumari - Dist,
Tamil Nadu - State, India.
Present/ Communication Address : Door No: 115, Anna Nagar, Thittuvilai,
Boothapandi P.o,Pin:629852,
Kanniyakumari - Dist,
Tamil Nadu - State, India.
3. Mobile Details : Personal: 9994724217,
Home : 8870395101
India Driving License : TN7420070001466
Valid Up to : 14.05.2020
Email I.D : 1.mpushameed_2006@yahoo.com
2.shahulhameed206@yahoo.in
Passport Details:
OLD NEW
Passport Number : B5316147 J4950958
Date of Issue : 16.04.2001 02.12.2010
Date of Expiry : 15.04.2011 01.12.2020
Place of Issue : Trichirappalli Madurai
Total Experience : 1. Indian experience 3 years
2. Gulf experience 15 years.
Details of Experience
1. Name of Company : T.K. Chemical Ltd.,
Thiruvanandapuram, India.
Duration : June 1986 to December 1989
Designation : Maintenance Foreman
Duties : I was appointed as a Foreman
(Trainee) and absorbed as Maintenance
Foreman. The duties are as follows.
i) Supervision of Installation
ii) General Maintenance
iii) Housekeeping and painting
2. Name of Company : GLOBAL CONT & TRAD CO LTD - GCTC
Ruwi, Sultanate of Oman.
Duration : April 1990 to March 1994
4. Designation : Blasting & Painting Charge Hand
Experience : 1.Painting of structural steel works,
painting of Boilers, Painting of Equipment’s and
Auxiliaries, Color coading and Numbering,
Painting of piping works. Blasting and surface
preparation of to all steel equipment works in
plant yard.
2.Supervision of fire proofing works for storage
Tank in PDO project & specially there Mash rah
: island MOD project in Muscat.
3. Name of Company : BAHWAN ENGINEERING CO. LLC.,
Ruwi, Sultanate of Oman - BEC
Reference : S. Ramakrishnan Manager-Administration
Duration : March 1994 to February 1998
Designation : Blasting & Painting Supervisor
Experience : Had been working in the oil and gas division of
Mechanical Engineering wing has experience in
Supervision of Painting works, Structural steel
equipment.
While working with BAHWAN
ENGINEERING CO. LLC, I have worked with
the following company as sub-contractors.
a. Name of Company : JOHNBROWN ENGINEERING LTD - JBE
Mina, Al-Fahal, Sultanate of Oman.
Reference : 1) Mr. Colin Simpson. A
Site Manager
2) Harry Sharpe. H
Construction Manager
Phase IV Ghubrah Power Station Project
Sultanate of Oman.
Duration : November 1994 to September 1995
Designation : Blasting&Painting Supervisor
5. Nature of Duties : Supervision of painting on structural steel
works, Blasting and surface preparation,
painting of piping systems, painting of acoustic
enclosures and Boiler stacks, Installation of 2X
Frame of Gas Turbines, Assisted in installation
of standard fase1 waste heat recovery boilers
and auxiliary equipment in erecting plant.
b. Name of Company : HITACHI ZOSEN,
Ruwi, Sultanate of Oman.
Reference : T. KOTANI
Erection Manager
Phase V Ghubrah Power & Desalination Project
Sultanate of Oman.
Duration : October 1995 to October 1996
Designation : Blasting&Painting Supervisor
Nature of Duties : Supervision of Blasting and Painting works,
anticorrosive coating works for structural steel,
equipments, etc. Assistance in the installation
of desalination equipments, auxiliaries, blasting
of piping works & surface works in
installation plant.
4. Name of Company : NAFTSAZECH QUSHM PJSC - NSQ
Soroosh & nowrooz integrated Development Project.
C/O-National Petroleum Construction Company
AbuDhabi - NPCC
Qeshm, Free Zone, Qeshm Island,
Islamic Republic of Iran.
Reference : YOUSIF A. AL HOSANI
Personnel & Admin. Manager
Duration : October 2002 to October 2003
Designation : Blasting&Painting Foreman
Nature of Duties : 1.Supervision of Blasting and painting works, for
structural steel equipments, pipes, tanks,
vessels, jackets, decks and surface preparation
of to all steel equipments works in yard plant.
6. : 2.Supervison of Fire proofing works for I-beam
: structural deck zoonin Soroosh& nowrooz
: integratedDevelopmentProject inQeshm, Free
: Zone,QeshmIsland,IslamicRepublicof Iran.
5. Name of Company : Overseas Technical Services & Coating Company
Muscat, Ruwi, Sultanate of man - OTSC
Sohar Refinery Project
C/O-Consolidated contractor Company - CCIC
Reference : K. Suresh Kumar
Project Manager
Duration : February 2005 May 2005
Designation : Blasting&Painting Supervisor
Nature of Duties : Supervision of blasting & Painting all steel
work piping system and supervision of workers
in Erection & installation yard plant.
6. Name of Company : Consolidated Contractors
international Company - (S.A.L) CCIC
QGX II LNG Development Project, Ras Laffan
Industrial City, Doha Qatar.
Duration : August – 2005 May- 2006
Designation : Blasting&Painting Supervisor
Nature of Duties : Supervision of blasting & painting all steel
work piping system of above & underground
pipes and supervision of workers in blasting &
painting yard plant.
7. Name of Company : Mohammad A1-Mojil Group - MMG
Dammam, Saudi Arabia
1. Steel factory – Petrorabigh, Jeddah.
2. Saudi Kayan Petrochemical Complex
(Kayan – 024 Utilities & Flare)
Jubail Industrial City, Dammam
7. Duration : October 2007 to September 2009
Designation : Blasting&Painting Superintendent
Nature of Duties : Supervision of blasting & painting all
steel work and civil foundation
concrete coating works in yard plant.
8. Name of Company : KAEFER
Dammam, Saudi Arabia
1.JERP - Jubail Export Refinery Project
2. SATORP - Saudi Aram co Total
Refinery Project. PKG - 5A ( NSH )
Jubail Industrial City, Dammam
Duration : September 2011 to January 2012
Designation : Blasting Painting SR.Supervisor
Nature of Duties : Supervision of blasting & painting all
steel pipes & structural works in yard.
9. Name of Company : OGAS CO
Ruwais – AbuDhabi
Borouge Ethylene Unit – 3 Project
C/O - Linde / CCIC
Duration : May 2012 to Jul 2012
Designation : Blasting Painting Site Engineer
Nature of Duties : Manage the site team and all related SB
&painting works, test pack works in
Plant.
10. Name of Company : Real Estate
8. Duration : 01-01-2013 to 2014
Designation : Promoter
NOTE :
Reason for leaving the job TO Change the Professional as same previous works..
GENERAL EXPERIENCES OF BLASTING AND PAINTING OPERATION AND
PROVEN KNOWLEDGE OF PAINTING INSPECTION PROCEDURES AS FOLLOW:
WORK DESCRIPTION
1.Blasting and painting works in all piping System structural steels fittings, vessels, gas
Turbine, boilers, decks, Jackets, Tanks. And all related steel equipments works, also civil
foundation concrete coating works in yard, installation and maintenance works in oil & gas
plant, petrochemical plant, refinery, Power plant, Water Desalination Plant, Petroleum
Development station.
2. Supervision of fire proofing works for storage tank in PDO project & specially there
Mash rah island MOD in Muscat.
3. Supervision of Fire proofing works for I-beam structural deck zoon in Soroosh & nowrooz
integrated Development Project in Qeshm, Free Zone, Qeshm Island, Islamic Republic of Iran.
NATURE OF DUTIES (WITH QC PROCEDURES)
1. Supervision of blasting operation, painting application and general maintenance.
2. Understanding the scope of blasting and painting works.
3. Implementation of vendor & project specifications.
4. Always follow the safety laws and rules regulation in work place (Health & Safety
Environment protection)
5. Must be looking surface condition (Rust Grade) A, B, C and D before the blasting
6. Method of preparation standard in which SAl, SA2, SA2½ and SA3 according to the ISO
paint specification procedures.
7. Type of material use to surface cleaning of steel by manual and mechanical ABM (grit,
super garnet, steel shot) according to the paint specification.
8. Looking necessary climatically conditions of windily, cloudy, rainy, snow, fog, Ice coat,
ram boasted & wet before blasting, painting works to while working the same operations.
9. Must be looking steel temp 10-15oC & up to 45oC to start the blasting operation.
10. Find the method of steel cleaning prior to painting application as per the paint
specification.
11. To take the reading of wet bulb temp, dry bulb temp dew point temp, steel temperature
and relative humidity while blasting and painting operations by use Hygrometer and
magnetic steel or Digital thermometer (116 & 212 elcometer)
12. To avoid the white patches in blasting preparation surfaces.
9. 13. Check the average Profile checking after the blasting preparation surfaces by using Testex
Tape of press O film (coarse, x coarse) as per the recommended microns.
14. To check dust test result in blasting preparation surfaces by use pressure preventative
Tape compare with ISO STD sample picture (class 1,2,3 & 4 level)
15. Measuring ISO comparator reading in blasting preparation surfaces by use compare with
segment standard sample plate. (segment 1,2,3 & 4 level)
16. To check and take the reading of chloride test in blasting preparation surfaces by use
Elcometer SCM-400. (off shore and on shore project)
17. Applying the paint using recommended method of brush, roller, air spray and airless
spray as per vendor with project specification. .
18. Must be check the air & metal temp is at least 3oC above the dew point Temp to painting
application.
19. Must be check relative humidity is less than 90% not exceed 85% to painting application.
20. To make sweet water and air cleaning& preparation as in every operation.
21. To correct and proper mixing ratio of in various paints with ordinary and various thinners
according to recommended paint specification.
22. Looking necessary paint system, manufacture, type, batch number, Expiry date viscosity
and colour to painting application and while the same operation.
23. Immediately to applying primer or first coat paint as after the completion of blasting
period ( within four hours ).
24. To avoid shaking, bubbles, pin hole,teer,orenge peel and over spray after the painting
application areas to keep the same operation.
25. Must be check & the Tip sizes in various painting surfaces, according to the paint
specification.
26. Taking measurements reading of dry film and wet film thickness using wet gage, digital
elecometer and Banana type gauge meter as per the average recommended microns.
27. Check and take measuring of (pin hole test) after the painting surfaces by use wet sponge
type, (up to 500 microns) high voltage spark test (above 500 microns) according to the
painting specification procedure. (ASM standard) by use D. portable holiday detector
(Elecometer 236).
28. To proper check the interval period to applying further coat of paint according to the paint
specification.
29. If any problem having there painted area to check as manual adhesiontest of cross cut,
pull off test andMKEtest.
30. Note the Blasting start time, finish time, and painting start time, finish time according to
the paint Specification procedure.
31. Maintaining air compressor, blasting pot, airless spray m/c (Graco, and Wiva pump), and
all blasting & painting equipments in good conditions with team.
32. Daily morning at assembly point to conduct tool box meeting with team ( STRA ).
33. To work directly under instructions of the superiors or manager.
34. Full Responsibility of all works and work force to the workers and team.
35. Good productive of quality and quantity jobs.
36. Smooth and immediately to solves the problems in work place where as the situation.
37. To hope and co- ordinating and good communications with team workers, superiors and
client.
38. Daily and Weekly report directly to the project control Department and attend the weekly
meeting.
10. 39. Must good in blasting and painting controls and able to independently manage a team of
blasters, painters, helpers, Mechanic, Drivers, operators,Leadman Charge hand,
Foremen, General foreman and supervisors.
40. Proficient with tools, equipment and materials common to the paint trade.
41. Planned and developed work schedules.
42. Ability to use computer application packages.
43. Ability to estimate paint requirement and cost control.
44. In depth knowledge of supervisory principles, practices and techniques.
45. To ensure all operations in the right Scheduled time and support to successful completion
of the project.
The information's given above are true to the best of my knowledge and belief.
M.P.SHAHULHAMEED.