ICID Plus Internal and External with G50.pdf
3D typical installation drawing from Schiedel. This 3D drawing forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to its termination point above the roof. Support is required for internal and external chimney systems. Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Recommended
More Related Content
Similar to ICID Plus Internal and External with G50.pdf
Similar to ICID Plus Internal and External with G50.pdf (20)
More from Schiedel UK
More from Schiedel UK (20)
Recently uploaded
Recently uploaded (20)
ICID Plus Internal and External with G50.pdf
- 1. ICID PLUS INTERNAL CHIMNEY The most frequently used bends are: 30ห bend / 45ห bend Adjustable pipe adjustable 50mm - 230mm Adaptor (Prima Smooth to ICID) Prima Smooth, Prima Plus or vitreous enamel SW-DW Adjustable Starter section Locking band L1 L2 Pipe L1(mm) 1500 1000 500 300 200 L2(mm) 1460 960 460 293 160 G50 Rectangular ventilated firestop plate 1 piece G50 Ventilated support plate 1 piece G50 Round ventilated firestop plate 1 piece Finish options: Plain galvanised steel Black RAL 9005 (matt) Optional Magnetic firestop cover Finish options: Plain galvanised steel Black RAL 9005 (matt) white RAL 9016 (matt) 50mm distance to combustibles ventilated firestop plates Raincap with sparkguard Also available Taperedterminal Roof support Raincap without mesh Air Shaft Air Visit www.schiedel.com/uk for more information Part of BMI GROUP TaperTerminal Structural wall band Structural wall band Structural wall band extension 45 deg. bend Adjustabletop plate Cantilever support 135 deg. tee Mitred wall sleeve 45 deg. Uniflash Universal EPDM rubber/aluminium flashing. Just pull the required diameter tab on the rubber seal ICID PLUS EXTERNAL CHIMNEY LIFETIME GUARANTEE and SCHIEDEL INSTALLER REWARDS Register an installation with our online guarantee registration portal and earn points to redeem for Love2Shop vouchers!