Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems. Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.

1. www.schiedel.com/uk
Schiedel Protect Box
Installation instructions
SCHIEDEL INSTALLER
REWARDS
DON'T FORGET TO REGISTER YOUR INSTALLATIONS
AND START EARNING SCHIEDEL INSTALLER REWARDS
See inside for more details
March 2023

2. 2
Installation Instructions
Existing vapor barrier
EPDM mat pulled down onto outer
bead of ISC50 adapter
EPDM is attached to the vapour
barrier using special tape supplied
with EPDM kit
Square section cut out of barrier
EPDM mat pulled up over joint until level
with barrier
Locking Band connected

3. 3
Installation Instructions
Protect Box lowered into position and
fastened securely to the joints
Insulation replaced around Protect
Box
Ready!
Additional components installed and
secured with locking bands
2-piece fire stop plate attached securely
to joists

4. 4
Schiedel Chimney Systems Ltd.
Crowther Estate
Washington
Tyne & Wear NE38 0AQ
Tel. +44 (0)191 416 1150
sales.uk@schiedel.com | www.schiedel.com/uk