2. What is a Clean room?
• “Federal Standard 209E” defines a clean room as
a room in which the concentration of airborne
particles is controlled to specified limits.
• “British Standard” defines a clean room as a room
with control of particulate contamination,
constructed and used in such a way as to minimize
the introduction, generation and retention of
particles inside the room and in which the
temperature, humidity, airflow patterns, air motion
and pressure are controlled
3. Principles Of The Clean Environment
• Air is highly (HEPA)
filtered (99.97% @
0.3μm)
• Layout should minimize
particle sources in
filtered air stream
• Air flow should remove
most particles generated
by process
4. TYPES OF CONTAMINATION
• Particulate
Dust, skin, hair, makeup…
• Chemical
Oil, grease, metal ions, perfume…
• Biological
Bacteria, fungi, rodents
• Radiation
Ultraviolet light…
5. CONTAMINATION SOURCES
• People ~75%
• Ventilation ~15%
• Room Structure ~5%
• Equipment ~5%
CONTAMINATION CONTROL
•Personnel Control
•Dress code
•Personal Hygiene
•Gowning
•Environmental Control
•Entrance and exit
•Materials and supplies
•Cleaning and maintenance
•Atmospheric (HVAC &
Microbial monitoring)
6. PERSONAL HYGIENE
• Shower each day before entry
• Control Dermatitis & Dandruff
• Do not smoke before or after entry
• No chewing gum or tobacco
• No Cosmetics , Jewellery or wrist watches should be worn
• Leave all personal items in changing room
(wallets,keys,comb etc.)
• Avoid coughing and sneezing if unavoidable leave the clean
room
• Do not move vigorously(Brisk movements shed large
particles from body movement)
7. There are Two Standards today Firstly,
Federal Standard 209
8. In 2001, ISO 14644-1 replaced Federal
Standard 209E on basis of clean Room classification
Federal Standard 209E ISO 14644-1
They measured 0.5µm
and larger
But ISO 14644-1
standard take account
even smaller particles
ranging from
0.1µm to 0.5µm
per cubic meter of air
Classified based on
that range
9. Classification Of Clean Room ISO 14644-1
Classified based on amount of micron particles in
one cubic meter of air
11. CLASSIFICATION AS PER EU cGMP
For examples in Blister packing
Temp 21c
Humidity 60-40%
Pressure 15pa
12. Schedule M
Schedule M: Contains various regulations for manufacturing,
premises, waste disposal and equipment for pharm units in India
13. Gowning
• Proper gowning order
– Hair cover
– Hood
– Shoe covers
– Coverall
– Gloves
– Face mask
– Safety Glasses
• Cotton garments shed
fibers. Hence, not used
14. AIR HANDLING SYSTEM:
• Requirements –
Temp should be 15-25 °C.
Atleast 20 air changes should be there per
hr.
Cleanliness requirements i.e. class 100.
Relative humidity 45-55 %.
Pressure differential between 2 area
should be 0.05-0.1 inch water gauge.
19. HEPA & UEPA
HIGH EFFICIENCY PARTICULATE AIR (HEPA):
They are box type depth filters used for air filtration.
These filters are made up of glass fibers.
Efficiency of HEPA filters are 99.97% against 0.3 μm particles.
Testing for HEPA filters:
Hot DOP test (efficiency testing), Cold DOP test (integrity testing)
, Air flow resistance test
ULTRA LOW PENETRATION AIR (ULPA):
Most ULPA filters are replaceable extended media dry filters that
have a minimum particle collection efficiency of 99.9997 % efficient
for particles greater than or equal to 0.12-micron in size.
20. AIRFLOW DISTRIBUTION AND CONTROL
• Unidirectional:(sometimes referred as laminar flow)
is an airflow pattern in which essentially the entire
body of air within a confined area moves with
uniform velocity and in single direction with generally
parallel airstreams. Clean rooms; class 100 and
below have unidirectional airflow pattern. Laminar air
flow ----120 FPM
• Non-unidirectional: airflow is not unidirectional by
having a varying velocity, multiple pass circulation or
nonparallel flow direction. Conventional flow clean
rooms (class 1000 & 10000) have non-unidirectional
or mixed air flow patterns.
• Mixed patterns : combine some of each flow type.
21.
22. Entry & Exit
• Enter and exit quickly.
• Only one person may enter at a time.
• Each user must use their own access card.
• Pass from the gowning area to the clean area slowly
to reduce migration of particles between areas.
• Restricted no. of people in aseptic area.
• Drug sensitivity tests should be carried out for
employees working in critical area.
• Medical check-ups of people works in critical area
should be more frequent than other employees.
Some specific requirements
23. TEST FREQUENCY
Particle Monitoring in air--------------6 monthly
HEPA Filter Integrity Testing---------Yearly
Air Changes Rate Calculation-------6 Monthly
Air Pressure Differentials--------------Daily
Temperature and Humidity------------Daily
Microbiological monitoring by---------Daily
24. • Current Good Manufacturing For pharmaceuticals; Manohar A. Potdar;
Page no:70-73.
• Pharmaceutical Quality Assurance, Manohar A. Potdar , Nirali
Prakashan; Page no:13.1-13.10
• Comparison of Quality Requirements for Sterile Product Manufacture as
Per Indian GMP and USFDA ;Yogita P, N Vishal Gupta, Natasha NS,
Ashwini Nageen L, R Sudeendra Bhat; Research Journal of
Pharmaceutical, Biological and Chemical Sciences; Jan 2012 volume
3(1): 225-236.
• www.fda.gov
Reference