The document discusses various types of robot end effectors and grippers. It describes grippers classified based on the method used to hold objects like mechanical, vacuum, magnetic, etc. It also discusses gripper mechanisms, actuation methods, and factors to consider for gripper design and selection. The key types covered are mechanical, vacuum, magnetic, pneumatic, and hydraulic grippers.
2. ROBOT DRIVE SYSTEMS AND END
EFFECTORS
Pneumatic Drives-Hydraulic Drives-Mechanical Drives-Electrical
Drives-D.C. Servo Motors, Stepper Motors, A.C. Servo Motors-
Salient Features, Applications and Comparison of all these
Drives, End Effectors-Grippers-Mechanical Grippers, Pneumatic
and Hydraulic- Grippers, Magnetic Grippers, Vacuum Grippers;
Two Fingered and Three Fingered Grippers; Internal Grippers
and External Grippers; Selection and Design Considerations.
3. End Effectors
Robot end effector is a device attached to the wrist of a
manipulator for the purpose of holding materials,
parts, tools to perform a specific task.
Examples
Grippers
Tools
End of arm tooling
Welding equipment
4.
5. Classification of End of arm tooling
According to method used to hold part in the gripper
According to special purpose process tools incorporated in final
gripper design
According to multiple function capability of gripper
6. According to method used to hold part in
the gripper
Mechanical pressure gripper- Friction (or) physical configuration of
the gripper retains the object
Vacuum Gripper- This gripper are used for flat object
Magnetic devices- These devices are used for ferrous object
7. According to special purpose process
tools incorporated in final gripper design
Drills
Grinders
Polisher
Paint sprayers
Welding guns and torches
8. According to multiple function capability
of gripper
Special purpose grippers
These grippers may be specialized device like remote centre
compliance (RCC) to insert an external mating component into
internal member, viz inserting a plug into hole.
9. Gripper
Grippers are the end effectors used for grasping the object
during work cycle. A gripper is a device which enables the
holding of an object to be manipulated. Gripper just like a hand.
It enables holding, tightening, handling, releasing of an object.
Examples
Vacuum grippers
Magnetized gripper
Adhesive grippers
10. Requirements of an effective gripper
Parts (or) items must be grasped and held without damage
Parts must be positioned firmly (or) rigidly while being operated on
Hands (or) grippers must accommodate parts of differing sizes (or) even
of varying sizes
Self aligning jaws are required to ensure that the load stays centred in
the jaws
Gripping (or) end effectors must not damage the part being handed
Jaws (or) Grippers must make contact at a minimum of two pints to
ensure that the part does not rotate while being positioned
11. Application of grippers
Material handling
Palletizing and depalletizing
Arranging parts on to pallets
Machine loading and unloading
Picking and placing of parts on conveyor
12.
13.
14. Mechanical Grippers
Mechanical gripper is used as an end effector in a robot for
grasping the objects with its mechanically operated fingers. In
industries two fingers are enough for holding purpose.
Mechanical grippers act as a robot hand. A basic robot hand will
have only two (or) three fingers.
15.
16.
17. Features of Mechanical Grippers
Simple to use
Grip using pivoting, linear (or) translation movement
Pneumatic control is cost effective and simple to maintain
Servo controls can be used where precise controlled gripper
movement is required
18. Advantages of Mechanical Grippers
Palletizing
Rotating objects
Moving small objects
Moving non uniformly shaped objects
No need for compressed air (or) other supplementary materials
20. Two (or) Dual jaw gripper
Two jaw gripper consists of two gripping jaws that apply
pressure externally (or) internally of the object. It depending on
the jaw defines.
Examples
Angular gripper
Parallel gripper
Toggle gripper
21. Three jaw Gripper
The three jaw gripper consists with three gripping jaw and apply
pressure like two jaw grippers.
Flexible Grippers
Flexible grippers consist with several linkage on each finger and two (or)
several fingers
Multiple jaw Grippers
If more than three jaws are used to hold the object, which is called as
multiple jaw grippers
23. Finger Grippers
As like as a jaw the fingers are used to hold (or) grasping the
object is called finger grippers.
24. Single finger gripper
Only one gripping fingers is mounted on the wrist for holding the
objects is called single finger gripper.
Two (or) dual finger gripper
Two fingers are mounted on the wrist for holding the objects are called
two finger (or) dual fingers
Types of two finger gripper
Parallel gripper
Angular gripper
Toggle gripper
31. Three finger gripper
If three fingers are attached on wrist for holding the object is
called three finger gripper.
32. Multiple finger gripper
If two (or) three fingers are not enough for holding work, more
than three finger grippers are designed for reliable and precise
palletizing (or) depalletizing and positioning of work pieces in
assembly and production process.
36. Internal gripper
In internal gripper, the finger pads are mounted on the inside of
the fingers. This mounting allows the pads to fit into the inside
diameter of the part it must lift. The pads are pressed against
the inside wall of the part
38. External Gripper
An external gripper is designed so that the finger pads press
against the outside of the component. Grips the exterior surface
of the object with closed finger.
43. Mechanical gripper based on contact
1. Unilateral gripper
Only one point (or) surface is touching (or) contact the object to be handled
is called unilateral gripper.
Example
i) Vacuum pad gripper
ii) Electro magnetic gripper
2. Multilateral Gripper
More than two points (or) surfaces touching (or) contact the components
to be handled is called as multilateral gripper
45. Vacuum Grippers
Vacuum grippers are used in the robots for grasping the non
ferrous objects. It uses vacuum cups as the gripping device. Vacuum
gripper is also commonly known as suction cups.
Vacuum grippers are those which are suction cups for handling
certain types of objects. This type of grippers will provide good
handling if the objects are smooth flat and clean. It has only one
surface for gripping the object.
48. 1. Universal suction cups
The universal suction cups are used for flat (or) slightly arched
surfaces
49. 2. Flat suction cups
With bars are suitable for flat (or) flexible items that need
assistance when lifted.
50. 3. Suction cups with bellows
Suction cups with bellows are usually used for curved surfaces.
It is used for example when separation is needed (or) when a
smaller item is being gripped and needs a shorter movement.
51. 4. Depth suction cups
The depth suction cup can be used for surfaces that are very
irregular and curved (or) when an item needs to be lifted over
an edge.
54. Venturi type Vacuum gripper
Venturi principles are used in the suction cups for creating vacuum
It consist of 1. Nozzle 2. Venture jet 3. Compressor
55. Magnetic Gripper
Making use of the principle of magnetism these grippers are used
for holding ferrous work part. A gripper in which work piece is
held by magnetic force. Magnetic has developed a magnetic
gripper (or) robot end of arm tooling. A magnetic gripper is one
which uses a permanent magnet for handling ferrous materials.
57. Electro magnetic Grippers
In electro magnetic grippers require any sort of external power
for handling the material. Gripper using electro magnets are
generally powered by dc power for handling materials.
59. Permanent magnetic Grippers
In permanent magnetic grippers do not require any sort of
external powered by DC power for handling the materials. The
holding grippers permanently possess high magnetic properties.
They do not lose their magnetic force.
61. Adhesive Gripper
Grippers in which an adhesive substance performs the grasping
action for handling fabrics and other light weight materials are
called adhesive gripper.
62. Hydraulic gripper
A gripper in which the work piece is hold by hydraulic force. A
hydraulic gripper is used as end effector in a robot for grasping the
object with its hydraulically actuated fingers.
Elements of the hydraulic gripper
1. Reservoir
2.pump
3. Prime mover
4. Actuator
5. hydraulic piping Force = pressure x surface
6. Valves
65. Pneumatic Gripper
A gripper in which the work piece is hold by pneumatic force.
A pneumatic gripper is used as end effector in a robot for grasping the
object with its pneumatically operated fingers.
Elements of the pneumatic system
1. Air filter
2. compressor
3. Air cooler
4. Drier
5. Control Valve
6. Air Actuator
7. Electric motor
8. Receiver tank
71. Gripper Mechanism
Gripper mechanism consists of finger (or) hand plates,
membrane, roller suction, Vacuum, magnetism, adhesive, scoops
and hooks, linkages, screws, cam, spring, string, hydraulics , rope
and pulley
72.
73. Linkage actuation gripper mechanism
Linkage actuation gripper mechanism is no cam, screw and gear.
There is movement only because of links attached to input and output.
There must be perfect design of mechanism such that input actuator
motion is transformed into the gripping action at the output.
74.
75. CAM actuated gripper mechanism
A cam actuated gripper with spring loaded follower can be used to
provide open and close actions of fingers.
The spring function is to force the gripper to close if the cam is moved
in open direction, while the movement of cam on the other direction
causes the gripper to open
76.
77. Screw driven (or) actuated
gripper mechanism
The screw type actuated gripper consists of a screw connected
with a threaded block. Screw driven grippers operated by
turning screw. In turn giving motion to connecting links output.
78.
79. Rope and Pulley driven gripper
mechanism
Rope and pulley gripper mechanism consists of a rope connected
with pulley. If the pulley is rotated on revolving motion, the rope
is transfer along with the direction the motion
80.
81. Gear and Rack actuation system
It consist of gear, rack and guide rail. Gear and rack mechanisms
are used to convert rotation motion into linear motion.
83. Translation Gripper Mechanisms
Translational mechanisms are widely used in grippers of
industrial robots. The finger motion corresponds to the piston
movement without any connecting mechanisms between them.
86. Wrist interface
Wrist interface refers to those connections of one system that
are matched to another system that is distinctly different
because of the basic nature of each system
87. Wrist Assembly
A wrist consisting of two (or) three compact joints attached to
the wrist is a gripper to grasp a work part (or) a tool to perform
process
89. Design of Gripper
When designing a gripper there are a number of factors that may need
consideration.
Gripping Force
Weight
Supply of service
Environmental capabilities
Sensor capabilities
Others