SlideShare a Scribd company logo
1 of 49
Download to read offline
BLACKSMITHY SHOP
BY: MANOJ YADAV
• Black" in "blacksmithy" refers to the
black fire scale, a layer of oxides that
forms on the surface of the metal
during heating.
• The word "smith" derives from an
old word, "smite" (to hit).
Forging
• “Forging is defined as the controlled plastic
deformation of metal into predetermined shapes by
pressure or impact blows, or combination of both.”
• “Forgeability is the relative ability of a material to
deform under a compressive load without
rupture.”
Grain Structure
• Parts have good strength
• High toughness
• Forgings require additional heat treating
grain flow (a) casting (b) machining (c) forging
Forging Materials
1. Aluminium alloys
2. Magnesium alloys
3. Copper alloys
4. Low carbon alloy
steel
5. Stainless steel
6. Nickel alloys
7. Titanium alloys
8. Iron based super alloys
9. Cobalt based super
alloys
10. Tantalum alloys
11. Tungsten alloys
12. Beryllium
HEATING DEVICES
FORGE FURNACE:
Types of Furnaces
• Box / Batch Type Furnace: This type of furnace is
used for heating small and medium size stock
because they are least expensive. These furnaces
are usually constructed of a rectangular steel frame
lined with insulating and refractory bricks.
• Rotary Hearth Furnace: These are doughnut shaped
and are set to rotate so that the stock is heated to
the correct temperature during one rotation. These
are heated by gas or oil.
Box / Batch Type Furnace
Rotary Hearth Furnace
Rotary Hearth Furnace
Types of Furnaces
• Continuous/ Conveyor Furnace: They are generally
used to heat one end of the larger workpiece. They had
an air or oil operated cylinder to push stock end to end
through a narrow furnace.
• Induction Furnace: In induction furnace the stocks are
passed through induction coils in the furnace. An
induction furnace greatly reduces scale formation due
to oxidation.
• Resistance Furnace: These furnaces are faster than
induction furnace and are often automated. In this
furnace the stock is connected into the circuit of step
down transformer and is heated due to resistance in
circuit.
Continuous/ Conveyor Furnace
Induction Furnace
Resistance Furnace
HAND TOOLS USED IN FORGING SHOP
ANVIL
SWAGE BLOCK
HAMMER
1a. Ball Pin Hammer 1b. Cross pin Hammer 2. Sledge
TONGS
CHISEL
SWAGES
A)Top Swage B) Bottom Swage
FULLERS
kkkkkkkkk
Flatter
HARDY OR ANVIL CUTTER
PUNCHES
DRIFTS
Forging Process
1. Open Die Forging
TYPES OF OPEN DIE FORGING
• Hand forging: Hand forging is done by
hammering the piece of metal, when it is
heated to the proper temperature, on an
anvil.
• Power forging
– Power Hammer: All power hammers employ the
same general principle of operation, a falling
weight striking the blow, with the entire energy
being absorbed by the work.
– Power Press: It is a machine tool which changes
the shape of workpiece by using pressure rather
than blow in previous case.
Forging Process
2. Impression Die Forging
TYPES OF IMPRESSION DIE FORGING
• Drop Forging: - is done with help of three types
of drop hammers. They are: (i) gravity hammer,
(ii) air lift hammer and (iii) power drop or steam
hammer.
• Press Forging: - is done in presses rather than
with hammers. The action is relatively slow
squeezing instead of delivering heavy blows.
• Machine Forging: - consists of applying
lengthwise pressure to a hot bar held between
grooved dies to enlarge some section, usually the
end.
A. Drop forging
B. Press forging
C. Machine/ Upset forging
Forging Process
3. Flashless /Closed Forging
Advantages of Forging Processes
Following are some of the major advantages of forging
processes.
(1) It improves the structure as well as mechanical
properties of the metallic parts.
(2) Forging facilitates orientation of grains in a desired
direction to improve the mechanical properties.
(3) Forged parts are consistent in shape with the
minimum presence of voids and porosities.
(4) Forging can produce parts with high strength to
weight ratio.
(5) Forging processes are very economical for moderate
to high volume productions.
Smith Forging Operations
1. Upsetting
2. Cogging/Drawing
Down/Drawing out
3. Setting Down
4. Fullering
5. Edging
6. Bending
7. Punching
8. Drifting
9. Flattening
10.Swaging
11.Welding
Upsetting
Cogging/Drawing Down/Drawing out
Setting down
Fullering
Edging
Bending
Punching
Drifting
Flattening
Welding
Forging Defects
• Unfilled Section: In this some section of the
die cavity are not completely filled by the
flowing metal.
• Cold Shut: This appears as a small cracks at
the corners of the forging.
• Scale Pits: This is seen as irregular depurations
on the surface of the forging.
• Die Shift: This is caused by the miss alignment
of the die halve, making the two halve of the
forging to be improper shape.
• Flakes: These are basically internal ruptures
caused by the improper cooling of the large
forging.
• Improper Grain Flow: This is caused by the
improper design of the die, which makes the
flow of the metal not flowing the final interred
direction.
Forging Defects
Shallow cracks and cavities can be removed by
chipping process.
Surface cracks and decarburized areas are
removed by grinding on special machine.
Die design should be properly made taking
care of all relevant aspects.
Destroyed forgings are straightened in
presses, if possible.
Mechanical properties can be improved by
suitable heat treatment process.

More Related Content

What's hot

Fasteners & fastening
Fasteners & fasteningFasteners & fastening
Fasteners & fasteningAbrish Gebru
 
Resistance welding
Resistance weldingResistance welding
Resistance weldingPravinkumar
 
LATHE ACCESSORIES PPT BY POLAYYA CHINTADA
LATHE ACCESSORIES PPT BY POLAYYA CHINTADALATHE ACCESSORIES PPT BY POLAYYA CHINTADA
LATHE ACCESSORIES PPT BY POLAYYA CHINTADAPOLAYYA CHINTADA
 
PPT ON TYPES OF WELDING JOINTS
PPT ON TYPES OF WELDING JOINTSPPT ON TYPES OF WELDING JOINTS
PPT ON TYPES OF WELDING JOINTSHimanshu Yadav
 
Type of threads - How to identify threads
Type of threads  - How to identify threadsType of threads  - How to identify threads
Type of threads - How to identify threadsTeesing BV
 
Tool Geometry & It’s Signature.
Tool Geometry & It’s Signature. Tool Geometry & It’s Signature.
Tool Geometry & It’s Signature. Akash Patel
 
Linear measurements
Linear measurementsLinear measurements
Linear measurementsNaman Dave
 
COORDINATE MEASURING MACHINE
COORDINATE MEASURING MACHINECOORDINATE MEASURING MACHINE
COORDINATE MEASURING MACHINEarunkumar6836
 
Limit, fit, tolerance
Limit, fit, toleranceLimit, fit, tolerance
Limit, fit, toleranceSayyed Raza
 
Surface finishing measurement tools - Tomlinson Surface meter and Taylor-Hobs...
Surface finishing measurement tools - Tomlinson Surface meter and Taylor-Hobs...Surface finishing measurement tools - Tomlinson Surface meter and Taylor-Hobs...
Surface finishing measurement tools - Tomlinson Surface meter and Taylor-Hobs...Pankajxkr
 
WORKSHOP TECHNOLOGY-Hand Tools and its Operation
WORKSHOP TECHNOLOGY-Hand Tools and its OperationWORKSHOP TECHNOLOGY-Hand Tools and its Operation
WORKSHOP TECHNOLOGY-Hand Tools and its OperationLearnwithus2
 

What's hot (20)

Welding
WeldingWelding
Welding
 
WELDING PROCESS
WELDING PROCESSWELDING PROCESS
WELDING PROCESS
 
Fasteners & fastening
Fasteners & fasteningFasteners & fastening
Fasteners & fastening
 
Resistance welding
Resistance weldingResistance welding
Resistance welding
 
Machining
MachiningMachining
Machining
 
Thread
ThreadThread
Thread
 
Limits,fits and tolerances
Limits,fits and tolerancesLimits,fits and tolerances
Limits,fits and tolerances
 
Fitting
FittingFitting
Fitting
 
LATHE ACCESSORIES PPT BY POLAYYA CHINTADA
LATHE ACCESSORIES PPT BY POLAYYA CHINTADALATHE ACCESSORIES PPT BY POLAYYA CHINTADA
LATHE ACCESSORIES PPT BY POLAYYA CHINTADA
 
PPT ON TYPES OF WELDING JOINTS
PPT ON TYPES OF WELDING JOINTSPPT ON TYPES OF WELDING JOINTS
PPT ON TYPES OF WELDING JOINTS
 
Milling Fixture
Milling FixtureMilling Fixture
Milling Fixture
 
Type of threads - How to identify threads
Type of threads  - How to identify threadsType of threads  - How to identify threads
Type of threads - How to identify threads
 
Tool Geometry & It’s Signature.
Tool Geometry & It’s Signature. Tool Geometry & It’s Signature.
Tool Geometry & It’s Signature.
 
Linear measurements
Linear measurementsLinear measurements
Linear measurements
 
casting ppt
casting pptcasting ppt
casting ppt
 
COORDINATE MEASURING MACHINE
COORDINATE MEASURING MACHINECOORDINATE MEASURING MACHINE
COORDINATE MEASURING MACHINE
 
Limit, fit, tolerance
Limit, fit, toleranceLimit, fit, tolerance
Limit, fit, tolerance
 
Surface finishing measurement tools - Tomlinson Surface meter and Taylor-Hobs...
Surface finishing measurement tools - Tomlinson Surface meter and Taylor-Hobs...Surface finishing measurement tools - Tomlinson Surface meter and Taylor-Hobs...
Surface finishing measurement tools - Tomlinson Surface meter and Taylor-Hobs...
 
WORKSHOP TECHNOLOGY-Hand Tools and its Operation
WORKSHOP TECHNOLOGY-Hand Tools and its OperationWORKSHOP TECHNOLOGY-Hand Tools and its Operation
WORKSHOP TECHNOLOGY-Hand Tools and its Operation
 
Casting
CastingCasting
Casting
 

Similar to Blacksmithy shop ppt

Similar to Blacksmithy shop ppt (20)

Blacksmithy shop
Blacksmithy shopBlacksmithy shop
Blacksmithy shop
 
Black Smithy shop
Black Smithy shopBlack Smithy shop
Black Smithy shop
 
blacksmith shop.pdf
blacksmith shop.pdfblacksmith shop.pdf
blacksmith shop.pdf
 
Manufacturing Technology 1 -unit 3
Manufacturing Technology 1 -unit 3Manufacturing Technology 1 -unit 3
Manufacturing Technology 1 -unit 3
 
Everything about Forging
Everything about ForgingEverything about Forging
Everything about Forging
 
PPT ON FORGING
PPT ON FORGINGPPT ON FORGING
PPT ON FORGING
 
Forging
ForgingForging
Forging
 
Drop forging report
Drop forging reportDrop forging report
Drop forging report
 
Lecture 1 metal_forming
Lecture 1 metal_formingLecture 1 metal_forming
Lecture 1 metal_forming
 
Lecture 1 metal_forming
Lecture 1 metal_formingLecture 1 metal_forming
Lecture 1 metal_forming
 
Manufacturing process
Manufacturing process Manufacturing process
Manufacturing process
 
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES 8.die castings
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES 8.die castingsIIIE SECTION A MANUFACTURING TECHNOLOGY NOTES 8.die castings
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES 8.die castings
 
manufacturingprocess-161127141804.pdf
manufacturingprocess-161127141804.pdfmanufacturingprocess-161127141804.pdf
manufacturingprocess-161127141804.pdf
 
METAL FORMING PROCESS
METAL FORMING PROCESSMETAL FORMING PROCESS
METAL FORMING PROCESS
 
Bulk deformation unit 3 notes
Bulk deformation unit 3 notesBulk deformation unit 3 notes
Bulk deformation unit 3 notes
 
Chapter 1 pointwise
Chapter 1 pointwiseChapter 1 pointwise
Chapter 1 pointwise
 
Manufacturing
ManufacturingManufacturing
Manufacturing
 
3 forging
3 forging3 forging
3 forging
 
unit-iii-180208085902.pdf
unit-iii-180208085902.pdfunit-iii-180208085902.pdf
unit-iii-180208085902.pdf
 
Unit 3-METAL FORMING PROCESSES
Unit 3-METAL FORMING PROCESSESUnit 3-METAL FORMING PROCESSES
Unit 3-METAL FORMING PROCESSES
 

More from Manoj Yadav

Unit i(mode of metaltransfer)
Unit i(mode of metaltransfer)Unit i(mode of metaltransfer)
Unit i(mode of metaltransfer)Manoj Yadav
 
Ipec limits fits
Ipec limits fitsIpec limits fits
Ipec limits fitsManoj Yadav
 
Milling notes (man. sc. ii)
Milling notes (man. sc. ii)Milling notes (man. sc. ii)
Milling notes (man. sc. ii)Manoj Yadav
 
Eme 503 manufacturing science-ii 13-14
Eme 503 manufacturing science-ii 13-14Eme 503 manufacturing science-ii 13-14
Eme 503 manufacturing science-ii 13-14Manoj Yadav
 
Eme 503 manufacturing science-ii 12-13
Eme 503 manufacturing science-ii 12-13Eme 503 manufacturing science-ii 12-13
Eme 503 manufacturing science-ii 12-13Manoj Yadav
 
manufacturing science-II university question paper 2009-10 (UPTU)
manufacturing science-II university question paper 2009-10 (UPTU)manufacturing science-II university question paper 2009-10 (UPTU)
manufacturing science-II university question paper 2009-10 (UPTU)Manoj Yadav
 
Ipec shaper and planer
Ipec shaper and planerIpec shaper and planer
Ipec shaper and planerManoj Yadav
 
Ipec manu scunit1
Ipec manu scunit1Ipec manu scunit1
Ipec manu scunit1Manoj Yadav
 
Sheet metal shop
Sheet metal shopSheet metal shop
Sheet metal shopManoj Yadav
 

More from Manoj Yadav (12)

Unit i(mode of metaltransfer)
Unit i(mode of metaltransfer)Unit i(mode of metaltransfer)
Unit i(mode of metaltransfer)
 
Ipec limits fits
Ipec limits fitsIpec limits fits
Ipec limits fits
 
Ipec milling
Ipec millingIpec milling
Ipec milling
 
Milling notes (man. sc. ii)
Milling notes (man. sc. ii)Milling notes (man. sc. ii)
Milling notes (man. sc. ii)
 
Eme 503 manufacturing science-ii 13-14
Eme 503 manufacturing science-ii 13-14Eme 503 manufacturing science-ii 13-14
Eme 503 manufacturing science-ii 13-14
 
Eme 503 manufacturing science-ii 12-13
Eme 503 manufacturing science-ii 12-13Eme 503 manufacturing science-ii 12-13
Eme 503 manufacturing science-ii 12-13
 
manufacturing science-II university question paper 2009-10 (UPTU)
manufacturing science-II university question paper 2009-10 (UPTU)manufacturing science-II university question paper 2009-10 (UPTU)
manufacturing science-II university question paper 2009-10 (UPTU)
 
2008 09
2008 092008 09
2008 09
 
Ipec shaper and planer
Ipec shaper and planerIpec shaper and planer
Ipec shaper and planer
 
Ipec manu scunit1
Ipec manu scunit1Ipec manu scunit1
Ipec manu scunit1
 
Ipec lathe
Ipec latheIpec lathe
Ipec lathe
 
Sheet metal shop
Sheet metal shopSheet metal shop
Sheet metal shop
 

Recently uploaded

priority interrupt computer organization
priority interrupt computer organizationpriority interrupt computer organization
priority interrupt computer organizationchnrketan
 
Curve setting (Basic Mine Surveying)_MI10412MI.pptx
Curve setting (Basic Mine Surveying)_MI10412MI.pptxCurve setting (Basic Mine Surveying)_MI10412MI.pptx
Curve setting (Basic Mine Surveying)_MI10412MI.pptxRomil Mishra
 
Comprehensive energy systems.pdf Comprehensive energy systems.pdf
Comprehensive energy systems.pdf Comprehensive energy systems.pdfComprehensive energy systems.pdf Comprehensive energy systems.pdf
Comprehensive energy systems.pdf Comprehensive energy systems.pdfalene1
 
Computer Graphics Introduction, Open GL, Line and Circle drawing algorithm
Computer Graphics Introduction, Open GL, Line and Circle drawing algorithmComputer Graphics Introduction, Open GL, Line and Circle drawing algorithm
Computer Graphics Introduction, Open GL, Line and Circle drawing algorithmDeepika Walanjkar
 
ROBOETHICS-CCS345 ETHICS AND ARTIFICIAL INTELLIGENCE.ppt
ROBOETHICS-CCS345 ETHICS AND ARTIFICIAL INTELLIGENCE.pptROBOETHICS-CCS345 ETHICS AND ARTIFICIAL INTELLIGENCE.ppt
ROBOETHICS-CCS345 ETHICS AND ARTIFICIAL INTELLIGENCE.pptJohnWilliam111370
 
Novel 3D-Printed Soft Linear and Bending Actuators
Novel 3D-Printed Soft Linear and Bending ActuatorsNovel 3D-Printed Soft Linear and Bending Actuators
Novel 3D-Printed Soft Linear and Bending ActuatorsResearcher Researcher
 
Robotics-Asimov's Laws, Mechanical Subsystems, Robot Kinematics, Robot Dynami...
Robotics-Asimov's Laws, Mechanical Subsystems, Robot Kinematics, Robot Dynami...Robotics-Asimov's Laws, Mechanical Subsystems, Robot Kinematics, Robot Dynami...
Robotics-Asimov's Laws, Mechanical Subsystems, Robot Kinematics, Robot Dynami...Sumanth A
 
March 2024 - Top 10 Read Articles in Artificial Intelligence and Applications...
March 2024 - Top 10 Read Articles in Artificial Intelligence and Applications...March 2024 - Top 10 Read Articles in Artificial Intelligence and Applications...
March 2024 - Top 10 Read Articles in Artificial Intelligence and Applications...gerogepatton
 
Javier_Fernandez_CARS_workshop_presentation.pptx
Javier_Fernandez_CARS_workshop_presentation.pptxJavier_Fernandez_CARS_workshop_presentation.pptx
Javier_Fernandez_CARS_workshop_presentation.pptxJavier Fernández Muñoz
 
SOFTWARE ESTIMATION COCOMO AND FP CALCULATION
SOFTWARE ESTIMATION COCOMO AND FP CALCULATIONSOFTWARE ESTIMATION COCOMO AND FP CALCULATION
SOFTWARE ESTIMATION COCOMO AND FP CALCULATIONSneha Padhiar
 
Turn leadership mistakes into a better future.pptx
Turn leadership mistakes into a better future.pptxTurn leadership mistakes into a better future.pptx
Turn leadership mistakes into a better future.pptxStephen Sitton
 
Prach: A Feature-Rich Platform Empowering the Autism Community
Prach: A Feature-Rich Platform Empowering the Autism CommunityPrach: A Feature-Rich Platform Empowering the Autism Community
Prach: A Feature-Rich Platform Empowering the Autism Communityprachaibot
 
Guardians of E-Commerce: Harnessing NLP and Machine Learning Approaches for A...
Guardians of E-Commerce: Harnessing NLP and Machine Learning Approaches for A...Guardians of E-Commerce: Harnessing NLP and Machine Learning Approaches for A...
Guardians of E-Commerce: Harnessing NLP and Machine Learning Approaches for A...IJAEMSJORNAL
 
US Department of Education FAFSA Week of Action
US Department of Education FAFSA Week of ActionUS Department of Education FAFSA Week of Action
US Department of Education FAFSA Week of ActionMebane Rash
 
Robotics Group 10 (Control Schemes) cse.pdf
Robotics Group 10  (Control Schemes) cse.pdfRobotics Group 10  (Control Schemes) cse.pdf
Robotics Group 10 (Control Schemes) cse.pdfsahilsajad201
 
Python Programming for basic beginners.pptx
Python Programming for basic beginners.pptxPython Programming for basic beginners.pptx
Python Programming for basic beginners.pptxmohitesoham12
 
Gravity concentration_MI20612MI_________
Gravity concentration_MI20612MI_________Gravity concentration_MI20612MI_________
Gravity concentration_MI20612MI_________Romil Mishra
 
Katarzyna Lipka-Sidor - BIM School Course
Katarzyna Lipka-Sidor - BIM School CourseKatarzyna Lipka-Sidor - BIM School Course
Katarzyna Lipka-Sidor - BIM School Coursebim.edu.pl
 
The Satellite applications in telecommunication
The Satellite applications in telecommunicationThe Satellite applications in telecommunication
The Satellite applications in telecommunicationnovrain7111
 

Recently uploaded (20)

priority interrupt computer organization
priority interrupt computer organizationpriority interrupt computer organization
priority interrupt computer organization
 
Curve setting (Basic Mine Surveying)_MI10412MI.pptx
Curve setting (Basic Mine Surveying)_MI10412MI.pptxCurve setting (Basic Mine Surveying)_MI10412MI.pptx
Curve setting (Basic Mine Surveying)_MI10412MI.pptx
 
Comprehensive energy systems.pdf Comprehensive energy systems.pdf
Comprehensive energy systems.pdf Comprehensive energy systems.pdfComprehensive energy systems.pdf Comprehensive energy systems.pdf
Comprehensive energy systems.pdf Comprehensive energy systems.pdf
 
Computer Graphics Introduction, Open GL, Line and Circle drawing algorithm
Computer Graphics Introduction, Open GL, Line and Circle drawing algorithmComputer Graphics Introduction, Open GL, Line and Circle drawing algorithm
Computer Graphics Introduction, Open GL, Line and Circle drawing algorithm
 
ROBOETHICS-CCS345 ETHICS AND ARTIFICIAL INTELLIGENCE.ppt
ROBOETHICS-CCS345 ETHICS AND ARTIFICIAL INTELLIGENCE.pptROBOETHICS-CCS345 ETHICS AND ARTIFICIAL INTELLIGENCE.ppt
ROBOETHICS-CCS345 ETHICS AND ARTIFICIAL INTELLIGENCE.ppt
 
Novel 3D-Printed Soft Linear and Bending Actuators
Novel 3D-Printed Soft Linear and Bending ActuatorsNovel 3D-Printed Soft Linear and Bending Actuators
Novel 3D-Printed Soft Linear and Bending Actuators
 
Robotics-Asimov's Laws, Mechanical Subsystems, Robot Kinematics, Robot Dynami...
Robotics-Asimov's Laws, Mechanical Subsystems, Robot Kinematics, Robot Dynami...Robotics-Asimov's Laws, Mechanical Subsystems, Robot Kinematics, Robot Dynami...
Robotics-Asimov's Laws, Mechanical Subsystems, Robot Kinematics, Robot Dynami...
 
March 2024 - Top 10 Read Articles in Artificial Intelligence and Applications...
March 2024 - Top 10 Read Articles in Artificial Intelligence and Applications...March 2024 - Top 10 Read Articles in Artificial Intelligence and Applications...
March 2024 - Top 10 Read Articles in Artificial Intelligence and Applications...
 
Javier_Fernandez_CARS_workshop_presentation.pptx
Javier_Fernandez_CARS_workshop_presentation.pptxJavier_Fernandez_CARS_workshop_presentation.pptx
Javier_Fernandez_CARS_workshop_presentation.pptx
 
SOFTWARE ESTIMATION COCOMO AND FP CALCULATION
SOFTWARE ESTIMATION COCOMO AND FP CALCULATIONSOFTWARE ESTIMATION COCOMO AND FP CALCULATION
SOFTWARE ESTIMATION COCOMO AND FP CALCULATION
 
Turn leadership mistakes into a better future.pptx
Turn leadership mistakes into a better future.pptxTurn leadership mistakes into a better future.pptx
Turn leadership mistakes into a better future.pptx
 
Prach: A Feature-Rich Platform Empowering the Autism Community
Prach: A Feature-Rich Platform Empowering the Autism CommunityPrach: A Feature-Rich Platform Empowering the Autism Community
Prach: A Feature-Rich Platform Empowering the Autism Community
 
Guardians of E-Commerce: Harnessing NLP and Machine Learning Approaches for A...
Guardians of E-Commerce: Harnessing NLP and Machine Learning Approaches for A...Guardians of E-Commerce: Harnessing NLP and Machine Learning Approaches for A...
Guardians of E-Commerce: Harnessing NLP and Machine Learning Approaches for A...
 
US Department of Education FAFSA Week of Action
US Department of Education FAFSA Week of ActionUS Department of Education FAFSA Week of Action
US Department of Education FAFSA Week of Action
 
Robotics Group 10 (Control Schemes) cse.pdf
Robotics Group 10  (Control Schemes) cse.pdfRobotics Group 10  (Control Schemes) cse.pdf
Robotics Group 10 (Control Schemes) cse.pdf
 
Python Programming for basic beginners.pptx
Python Programming for basic beginners.pptxPython Programming for basic beginners.pptx
Python Programming for basic beginners.pptx
 
Gravity concentration_MI20612MI_________
Gravity concentration_MI20612MI_________Gravity concentration_MI20612MI_________
Gravity concentration_MI20612MI_________
 
Katarzyna Lipka-Sidor - BIM School Course
Katarzyna Lipka-Sidor - BIM School CourseKatarzyna Lipka-Sidor - BIM School Course
Katarzyna Lipka-Sidor - BIM School Course
 
ASME-B31.4-2019-estandar para diseño de ductos
ASME-B31.4-2019-estandar para diseño de ductosASME-B31.4-2019-estandar para diseño de ductos
ASME-B31.4-2019-estandar para diseño de ductos
 
The Satellite applications in telecommunication
The Satellite applications in telecommunicationThe Satellite applications in telecommunication
The Satellite applications in telecommunication
 

Blacksmithy shop ppt

  • 2. • Black" in "blacksmithy" refers to the black fire scale, a layer of oxides that forms on the surface of the metal during heating. • The word "smith" derives from an old word, "smite" (to hit).
  • 3. Forging • “Forging is defined as the controlled plastic deformation of metal into predetermined shapes by pressure or impact blows, or combination of both.” • “Forgeability is the relative ability of a material to deform under a compressive load without rupture.”
  • 4. Grain Structure • Parts have good strength • High toughness • Forgings require additional heat treating grain flow (a) casting (b) machining (c) forging
  • 5. Forging Materials 1. Aluminium alloys 2. Magnesium alloys 3. Copper alloys 4. Low carbon alloy steel 5. Stainless steel 6. Nickel alloys 7. Titanium alloys 8. Iron based super alloys 9. Cobalt based super alloys 10. Tantalum alloys 11. Tungsten alloys 12. Beryllium
  • 7. Types of Furnaces • Box / Batch Type Furnace: This type of furnace is used for heating small and medium size stock because they are least expensive. These furnaces are usually constructed of a rectangular steel frame lined with insulating and refractory bricks. • Rotary Hearth Furnace: These are doughnut shaped and are set to rotate so that the stock is heated to the correct temperature during one rotation. These are heated by gas or oil.
  • 8. Box / Batch Type Furnace
  • 11. Types of Furnaces • Continuous/ Conveyor Furnace: They are generally used to heat one end of the larger workpiece. They had an air or oil operated cylinder to push stock end to end through a narrow furnace. • Induction Furnace: In induction furnace the stocks are passed through induction coils in the furnace. An induction furnace greatly reduces scale formation due to oxidation. • Resistance Furnace: These furnaces are faster than induction furnace and are often automated. In this furnace the stock is connected into the circuit of step down transformer and is heated due to resistance in circuit.
  • 15. HAND TOOLS USED IN FORGING SHOP ANVIL
  • 17. HAMMER 1a. Ball Pin Hammer 1b. Cross pin Hammer 2. Sledge
  • 18. TONGS
  • 20. SWAGES A)Top Swage B) Bottom Swage
  • 23. HARDY OR ANVIL CUTTER
  • 26. Forging Process 1. Open Die Forging
  • 27. TYPES OF OPEN DIE FORGING • Hand forging: Hand forging is done by hammering the piece of metal, when it is heated to the proper temperature, on an anvil. • Power forging – Power Hammer: All power hammers employ the same general principle of operation, a falling weight striking the blow, with the entire energy being absorbed by the work. – Power Press: It is a machine tool which changes the shape of workpiece by using pressure rather than blow in previous case.
  • 29. TYPES OF IMPRESSION DIE FORGING • Drop Forging: - is done with help of three types of drop hammers. They are: (i) gravity hammer, (ii) air lift hammer and (iii) power drop or steam hammer. • Press Forging: - is done in presses rather than with hammers. The action is relatively slow squeezing instead of delivering heavy blows. • Machine Forging: - consists of applying lengthwise pressure to a hot bar held between grooved dies to enlarge some section, usually the end.
  • 32. C. Machine/ Upset forging
  • 33.
  • 34. Forging Process 3. Flashless /Closed Forging
  • 35. Advantages of Forging Processes Following are some of the major advantages of forging processes. (1) It improves the structure as well as mechanical properties of the metallic parts. (2) Forging facilitates orientation of grains in a desired direction to improve the mechanical properties. (3) Forged parts are consistent in shape with the minimum presence of voids and porosities. (4) Forging can produce parts with high strength to weight ratio. (5) Forging processes are very economical for moderate to high volume productions.
  • 36. Smith Forging Operations 1. Upsetting 2. Cogging/Drawing Down/Drawing out 3. Setting Down 4. Fullering 5. Edging 6. Bending 7. Punching 8. Drifting 9. Flattening 10.Swaging 11.Welding
  • 47. Forging Defects • Unfilled Section: In this some section of the die cavity are not completely filled by the flowing metal. • Cold Shut: This appears as a small cracks at the corners of the forging. • Scale Pits: This is seen as irregular depurations on the surface of the forging. • Die Shift: This is caused by the miss alignment of the die halve, making the two halve of the forging to be improper shape.
  • 48. • Flakes: These are basically internal ruptures caused by the improper cooling of the large forging. • Improper Grain Flow: This is caused by the improper design of the die, which makes the flow of the metal not flowing the final interred direction. Forging Defects
  • 49. Shallow cracks and cavities can be removed by chipping process. Surface cracks and decarburized areas are removed by grinding on special machine. Die design should be properly made taking care of all relevant aspects. Destroyed forgings are straightened in presses, if possible. Mechanical properties can be improved by suitable heat treatment process.