1. Jacton Electromechanical Co.,Ltd | Tel: +86 769 81585852 | Fax: +86 769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
20 Ton Screw Jack 3000 MM Screw Length For
Hoisting 1 Ton Weight Water Barrier In Russia
1 Ton Weight Water Barrier With The Pressure Is Hoisted By Double 20 Ton Worm Gear Screw
Jacks 3000 MM Screw Length In Russia
Small area water regulation makes a valuable contribution to the prevention of damage, whether it is
caused by excess water or a lack of water. Water barrier jacks are the ideal solution for this. They are
used on streams and rivers, in sluices and power stations to regulate the water level and turbine capacity
and to drain and flush reservoirs. In open water near towns, water barrier jacks are used in emergency
water extraction equipment for fire fighting. The range of systems available today is wide and varied to
meet specific application requirements.
Many modernization programs for the operation of canals that deliver water to the agricultural community
involve the mechanization of canal gates. Water barrier Jacks provide a method of raising and lowering
canal gates using electric motors / geared motors / worm gear reducers instead of human power starting
with a simple manual water barrier jack or hand-powered water barrier jacks. Motorized Single unit, Dual
units … multiple units or tandem water barrier jacks arrangements with electric motors / geared motors /
worm gear reducers for lifting gates
Common to most of water barrier jacks are the following elements:
* Single unit motorized screw jack attached directly to the water barriers or one electric motors / geared
motors / worm gear reducers driven multiple units or tandem double input shaft screw jacks attached
directly to the water barrier.
* Worm and worm gear set, worm gear and lifting screw set that rotates to raise and lower the water
barrier.
* Gear reduction mechanisms used to control the lifting speed of the water barrier and to provide a
2. Jacton Electromechanical Co.,Ltd | Tel: +86 769 81585852 | Fax: +86 769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
20 Ton Screw Jack 3000 MM Screw Length For
Hoisting 1 Ton Weight Water Barrier In Russia
mechanical advantage to overcome the forces involved in lifting the water barrier.
* Limit switches to stop the electric motors / geared motors / worm gear reducers once the water barrier
has reached the upper or lower limit of travel.
* Inverted translating screw jack with clevis end which is attached directly to the water barrier. Because of
water barrier both side guiding supports, the lifting screw travels up and down with water barriers.
* Screw jack with acme screw, which has self-locking, precision positioning features, no need any brake
mechanisms or other locking systems.
Russia Water Barrier Projects
Customers technical details: According to the account of our engineers the weight of water barrier is to
be 1 ton with the pressure. The width of our water barrier is 1500 mm, the length-3000 mm, The
parameter of our motor is 7,5 kw with ,1450 rpm, and the reductor with 28 rpm, So we need a screw with
a length-3000 mm and with the diameter -55-60 mm /12 pieaces.
Solutions:
1 Ton Weight Water Barrier With The Pressure Is Hoisted By Double 20 Ton Worm Gear Screw Jacks
3000 MM Screw Length In Russia. Using 20 ton worm gear screw jack with lifting screw diameter 64mm,
pitch 8mm, screw travel length 3000 mm. Following customers motor and the reductor, final output 28
rpm. 20T jack use high speed ratio with 1 mm travels per revolution of input shaft.
3. Jacton Electromechanical Co.,Ltd | Tel: +86 769 81585852 | Fax: +86 769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
20 Ton Screw Jack 3000 MM Screw Length For
Hoisting 1 Ton Weight Water Barrier In Russia
4. Jacton Electromechanical Co.,Ltd | Tel: +86 769 81585852 | Fax: +86 769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
20 Ton Screw Jack 3000 MM Screw Length For
Hoisting 1 Ton Weight Water Barrier In Russia
5. Jacton Electromechanical Co.,Ltd | Tel: +86 769 81585852 | Fax: +86 769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
20 Ton Screw Jack 3000 MM Screw Length For
Hoisting 1 Ton Weight Water Barrier In Russia
Others Customers - Screw Jacks For Sluice Gate Application Projects
6. Jacton Electromechanical Co.,Ltd | Tel: +86 769 81585852 | Fax: +86 769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
20 Ton Screw Jack 3000 MM Screw Length For
Hoisting 1 Ton Weight Water Barrier In Russia
1. JTW-50T-IS-5000-L-II-C-PP/LS. Spindle lifting screw sizes Tr120x20, 50ton maximum tension lifting force, inverted
mounting screw jack, translating screw configuration, long travel length 5000mm, low gear ratio 32:1, clevis end fitting, double
input worm shaft, protective pipe and limit switches accessories.
2. JTW-35T-IS-4000-L-II-C-PP/LS. Spindle lifting screw sizes Tr100x18, 35ton maximum tension lifting force, inverted
mounting worm screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 32:1, clevis end fitting,
double input worm shaft, protective pipe and limit switches accessories.
3. JTW-25T-IS-3500-L-II-C-PP/LS. Spindle lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted
mounting worm screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 32:1, clevis end fitting,
double input worm shaft, protective pipe and limit switches accessories.
4. JTW-20T-IS-3000-L-II-L-II-C-PP/LS. Spindle lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted
mounting worm screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 24:1, clevis end fitting,
double input worm shaft, protective pipe and limit switches accessories.
7. Jacton Electromechanical Co.,Ltd | Tel: +86 769 81585852 | Fax: +86 769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
20 Ton Screw Jack 3000 MM Screw Length For
Hoisting 1 Ton Weight Water Barrier In Russia
8. Jacton Electromechanical Co.,Ltd | Tel: +86 769 81585852 | Fax: +86 769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
20 Ton Screw Jack 3000 MM Screw Length For
Hoisting 1 Ton Weight Water Barrier In Russia
Sluice Gate Jacks Parts 1 – Worm Gear Screw Jacks
Website: http://www.screw-jack.com/jtw-worm-screw-jack/
Website: http://www.screw-jack.com/jt-acme-screw-jack/
Website: http://www.screw-jack.com/jtc-cubic-screw-jack/
Website: http://www.screw-jack.com/jtm-machine-screw-jack/
Website: http://www.screw-jack.com/jtb-ball-screw-jack/
9. Jacton Electromechanical Co.,Ltd | Tel: +86 769 81585852 | Fax: +86 769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
20 Ton Screw Jack 3000 MM Screw Length For
Hoisting 1 Ton Weight Water Barrier In Russia
Sluice Gate Jacks Parts 2 – Jaw Type And Flex Type Couplings
Website: http://www.screw-jack.com/flexible-jaw-coupling.html
Sluice Gate Jacks Parts 3 – Linking Bars
Website: http://www.screw-jack.com/connecting-shafts.html
10. Jacton Electromechanical Co.,Ltd | Tel: +86 769 81585852 | Fax: +86 769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
20 Ton Screw Jack 3000 MM Screw Length For
Hoisting 1 Ton Weight Water Barrier In Russia
Sluice Gate Jacks Parts 4 – Pillow Block Bearings
Website: http://www.screw-jack.com/pillow-block-bearing.html
Sluice Gate Jacks Parts 5 – Electric Motors / Geared Motors
Website: http://www.screw-jack.com/electric-motor.html
11. Jacton Electromechanical Co.,Ltd | Tel: +86 769 81585852 | Fax: +86 769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
20 Ton Screw Jack 3000 MM Screw Length For
Hoisting 1 Ton Weight Water Barrier In Russia
Sluice Gate Jacks Parts 6 – Geared Motors
Website: http://www.screw-jack.com/helical-gear-motor.html
Other Products Includes: JT Acme Screw Jack, JTC Cubic Screw Jack, JTW Worm Screw Jack, JTM Machine Screw
Jack, JTB Ball Screw Jack, JTS Bevel Gear Jack, JT Series T Type Spiral Bevel Gear Boxes, JTP Series Cubic Spiral Bevel
Gear Boxes, JTV Series Cubic Spiral Bevel Gear Boxes, JTA Series Lightweight Aluminum Spiral Bevel Gear Boxes, Multiple
Screw Jack System Arrangements, Cast Iron Hand Wheel, Aluminum Hand Crank, Flexible Jaw Coupling, Electric Motor,
Worm Gear Speed Reducer, Geared Motor, Digital Position Indicator, Pillow Block Bearing, Ball Joint Rod End Bearing,
Bellows Boot, Linking Bar, Limit Switches, Swivel Mounting Plate, Pivoting Mounting Base, Planetary Speed Reducer,
Hydraulic Cylinder Rod End Bearing, Frequency Inverter, 24V DC Motor, 12V DC Motor, 36V DC Motor, 48V DC Motor, 24V
DC Motor Gear Reducer, 12V DC Motor Gear Reduction, 36V DC Gear Motor, 48V DC Gear Reduction Motor etc.