Jacton Electromechanical Co., Ltd. provides 10-ton worm gear jacks designed for spider mould installation, specifically capable of handling a maximum dynamic load of 6.4 tons. These jacks feature manual operation and are equipped with a cast iron hand wheel and a female spherical rod end for added functionality. The company also offers a variety of other products, including different types of screw jacks and gear boxes.

1. Jacton Electromechanical Co.,Ltd | Tel: +86 769 81585852 | Fax: +86 769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
Screw Jacks For Spider Mould Installation
10 Ton Worm Gear Jack Lift Pulling For Spider Mould Installation In Denmark
Individually use 10 ton worm gear jack lift, manual operation with 8” (200mm) cast iron hand wheel, with
fem with female spherical rod end for 5 ton load applications, pictures as follows. No guided for jacks, use
anti-rotation device keyed screw worm gear jack lift pulling for spider mould installation in Denmark.
Model: JT-10T-UK-200-L-IV-C-PP/HW/SN/RE
* 10t screw jacks, max. dynamic load 6.4 tons
* Upright mounting, keyed screw type
* 200mm stroke with low speed ratio 1/32, 0.25mm per turn of hand wheel
* Screw top with thread end M30x2 matching PHS 30 female spherical rod end
* Double input worm shaft
* Accessories: protective tube, 8″ cast iron hand wheel, stop nut, Phs30 rod end.

2. Jacton Electromechanical Co.,Ltd | Tel: +86 769 81585852 | Fax: +86 769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
Screw Jacks For Spider Mould Installation

3. Jacton Electromechanical Co.,Ltd | Tel: +86 769 81585852 | Fax: +86 769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
Screw Jacks For Spider Mould Installation

4. Jacton Electromechanical Co.,Ltd | Tel: +86 769 81585852 | Fax: +86 769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
Screw Jacks For Spider Mould Installation

5. Jacton Electromechanical Co.,Ltd | Tel: +86 769 81585852 | Fax: +86 769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
Screw Jacks For Spider Mould Installation
Other Products Includes: JT Acme Screw Jack, JTC Cubic Screw Jack, JTW Worm Screw Jack, JTM Machine Screw
Jack, JTB Ball Screw Jack, JTS Bevel Gear Jack, JT Series T Type Spiral Bevel Gear Boxes, JTP Series Cubic Spiral Bevel
Gear Boxes, JTV Series Cubic Spiral Bevel Gear Boxes, JTA Series Lightweight Aluminum Spiral Bevel Gear Boxes, Multiple
Screw Jack System Arrangements, Cast Iron Hand Wheel, Aluminum Hand Crank, Flexible Jaw Coupling, Electric Motor,
Worm Gear Speed Reducer, Geared Motor, Digital Position Indicator, Pillow Block Bearing, Ball Joint Rod End Bearing,
Bellows Boot, Linking Bar, Limit Switches, Swivel Mounting Plate, Pivoting Mounting Base, Planetary Speed Reducer,
Hydraulic Cylinder Rod End Bearing, Frequency Inverter, 24V DC Motor, 12V DC Motor, 36V DC Motor, 48V DC Motor, 24V
DC Motor Gear Reducer, 12V DC Motor Gear Reduction, 36V DC Gear Motor, 48V DC Gear Reduction Motor etc.