Jtw 5 t worm screw jack, acme screw gear jack, 5ton acme screw jack, 50kn acme screw jack linear, 10000lbs acme thread screw jack, compact acme screw jacks features: 1. Maximum load capacity 5 ton, maximum torque 44.2 Nm. 2. Lift screw diameter 40 mm, pitch 7 mm. 3. 6:1, 24:1 gear ratios 4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation. 5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems. 6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both. 7. 3-phase or single phase motor driven with 1500 rpm input, standard lifting speed 1750 mm/min and 437.5 mm/min. 8. No standard lift screw stroke, maximum travel stroke 2000mm when tension load. 9. Top plate, clevis end, plain end and threaded end are available. 10. Individually or multiple screw jack lift system arrangements are available. 11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry. 12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.

1. JTW Series Worm Gear Screw Jack
Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
JTC-5T 5 Ton Worm Gear Screw Jack
Descriptions
1. Maximum load capacity 5 ton, maximum torque 44.2 Nm.
2. Lift screw diameter 40 mm, pitch 7 mm.
3. 6:1, 24:1 gear ratios
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake
mechanism or other locking systems.
6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both.
7. 3-phase or single phase motor driven with 1500 rpm input, standard lifting speed 1750 mm/min and 437.5 mm/min.
8. No standard lift screw stroke, maximum travel stroke 2000mm when tension load.
9. Top plate, clevis end, plain end and threaded end are available.
10. Individually or multiple screw jack lift system arrangements are available.
11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line,
electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip
galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge
beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine,
heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring
system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment,
open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry,
construction industry, irrigation industry.
12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain,
UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech
Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia,
Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam,
Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.

2. JTW Series Worm Gear Screw Jack
Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
Technical Parameter TableTechnical Parameter Table
Dimension and DrawingDimension and Drawing
Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
JTW Series Worm Gear Screw Jack