Solar tracking screw jack, ball screw jack applications solar panels, solar screw jack, screw jack type solar tracker motor, solar jacks and actuators suppliers and manufacturers in china

•

1 like•341 views

solar tracking screw jack, ball screw jack applications solar panels, solar screw jack, screw jack type solar tracker motor, solar jacks and actuators regular screw jack model: JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP 10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism. Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.

Business

Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
Precision Screw Jack Positioning Solar Tracking System
Precision screw jack is the perfect solutions for solar tracking system requires withstanding
wind force and weather, self locking fuction, precision positioning, maintenance free, long
service life. Notes, when electric ball screw jack, must be equipped with brake motor or other
lock mechanism.
Important Component:
1. Self-locking screw jacks with motor flange adapter.
2. DC 24V gear reduction motor, customized AC gear motor, worm gear reducer, helical bevel
gear reducer or other gear reduction mechanism.
3. Limit switches or travel limiter for control full extend and retract travel stroke, which installed
on steel protective pipe cover.
4. Steel protective pipe cover for anti-rust and anti-dust under worm gear screw jack base,
when full retract stroke.
5. Bellows boots or rubber bellows for anti-rust and anti-dust upper worm gear screw jack base,
when full extend stroke.
6. Swivel plate, swivel trunnion mounting base, pivoting frame for tracking sun of pivot solar
panel with other loads.
Other Features:
1. Upright type installation, compression load and tension load.
2. Translating screw with female thread cylinder rod clevis end.
3. Anti-rotation keyed screw with male thread end matching female ball joint rod end bearing.
4. Worm gear screw jack actuators lift mechanism with low speed gear ratio matching gear
reduction mechanism.
5. Total jack lifting screw length = required stroke + bellows full retract length + jack housing
height + screw top end length + swivel plate or swivel trunnion mounting base height.
6. Lifting speed about 100 mm/min to 300 mm/min, it depends on customers requirements.
Regular screw jack selected model JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP
10ton static lifting force, upright type jack, translating screw configuration, customized
threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm =
travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio
1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and
swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from
150mm/min to 300mm/min with gear reduction mechanism.
Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type
jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low
worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit
switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel
speed from 150mm/min to 300mm/min with gear reduction mechanism.

Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack

Similar to Solar tracking screw jack, ball screw jack applications solar panels, solar screw jack, screw jack type solar tracker motor, solar jacks and actuators suppliers and manufacturers in china

sluice gate jack with limit switches, sluice gate jacks, screw jack gearboxes for raising and lowering sluice gates features: Important Components: 1. Heavy duty and self lock screw jack. Special requirements stainless steel jack 2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism. 3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover. 4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke. Other Features: 1. Inverted type installation, tension load. 2. Translating screw with female thread cylinder rod clevis end. 3. Low speed gear ratio screw jack with gear reduction mechanism geared motor. 4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length. 5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements. 6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force. 7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed. Customers Used Screw Jacks Models: 1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. 2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. 3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.

Sluice gate jack with limit switches, sluice gate jacks, screw jack gearboxes...

Jacton Electromechanical Co.,Ltd

dam gate hoist, head gate hoist, electric gate gear, sluice gate lifting gear, sluice gate jack, screw jack raising and lowering dampers features: Important Components: 1. Heavy duty and self lock screw jack. Special requirements stainless steel jack 2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism. 3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover. 4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke. Other Features: 1. Inverted type installation, tension load. 2. Translating screw with female thread cylinder rod clevis end. 3. Low speed gear ratio screw jack with gear reduction mechanism geared motor. 4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length. 5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements. 6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force. 7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed. Customers Used Screw Jacks Models: 1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. 2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. 3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.

Dam gate hoist, head gate hoist, electric gate gear, sluice gate lifting gear...

Jacton Electromechanical Co.,Ltd

worm gear screw jack for canal gate, motorized screw jack hoisting sluice gates, gates with screw hoists, sluice gate screw jack motor operated features: Important Components: 1. Heavy duty and self lock screw jack. Special requirements stainless steel jack 2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism. 3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover. 4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke. Other Features: 1. Inverted type installation, tension load. 2. Translating screw with female thread cylinder rod clevis end. 3. Low speed gear ratio screw jack with gear reduction mechanism geared motor. 4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length. 5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements. 6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force. 7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed. Customers Used Screw Jacks Models: 1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. 2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. 3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.

Worm gear screw jack for canal gate, motorized screw jack hoisting sluice gat...

Jacton Electromechanical Co.,Ltd

screw hoist raising lowering sluice gate canal, screw jack lifting gate, jack screw operated sluice gate, hand crank screw jack for gates features: Important Components: 1. Heavy duty and self lock screw jack. Special requirements stainless steel jack 2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism. 3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover. 4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke. Other Features: 1. Inverted type installation, tension load. 2. Translating screw with female thread cylinder rod clevis end. 3. Low speed gear ratio screw jack with gear reduction mechanism geared motor. 4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length. 5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements. 6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force. 7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed. Customers Used Screw Jacks Models: 1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. 2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. 3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.

Screw hoist raising lowering sluice gate canal, screw jack lifting gate, jack...

Jacton Electromechanical Co.,Ltd

sluice gate screw jack gearbox, gate lifting screw jack, sluice gate jack double, gearbox and motor for gate, electric water lifting gate screw jack gear features: Important Components: 1. Heavy duty and self lock screw jack. Special requirements stainless steel jack 2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism. 3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover. 4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke. Other Features: 1. Inverted type installation, tension load. 2. Translating screw with female thread cylinder rod clevis end. 3. Low speed gear ratio screw jack with gear reduction mechanism geared motor. 4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length. 5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements. 6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force. 7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed. Customers Used Screw Jacks Models: 1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. 2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. 3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.

Sluice gate screw jack gearbox, gate lifting screw jack, sluice gate jack dou...

Jacton Electromechanical Co.,Ltd

gate screw jack, hydraulic sluice gate actuators, sluice gate electric actuator, linear actuator gate opener, sluice gate hoist features: Important Components: 1. Heavy duty and self lock screw jack. Special requirements stainless steel jack 2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism. 3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover. 4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke. Other Features: 1. Inverted type installation, tension load. 2. Translating screw with female thread cylinder rod clevis end. 3. Low speed gear ratio screw jack with gear reduction mechanism geared motor. 4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length. 5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements. 6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force. 7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed. Customers Used Screw Jacks Models: 1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. 2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. 3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.

Gate screw jack, hydraulic sluice gate actuators, sluice gate electric actuat...

Jacton Electromechanical Co.,Ltd

electric screw lift gate, hydro gates screw jacks, screw jack gate lift gearbox,sluice gate screw jack,screw jack water gate positioner features: Important Components: 1. Heavy duty and self lock screw jack. Special requirements stainless steel jack 2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism. 3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover. 4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke. Other Features: 1. Inverted type installation, tension load. 2. Translating screw with female thread cylinder rod clevis end. 3. Low speed gear ratio screw jack with gear reduction mechanism geared motor. 4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length. 5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements. 6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force. 7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed. Customers Used Screw Jacks Models: 1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. 2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. 3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.

Electric screw lift gate, hydro gates screw jacks, screw jack gate lift gearb...

Jacton Electromechanical Co.,Ltd

Miniature worm gear acme mechanical jacks, micro miniature actuators, micro-m...

Jacton Electromechanical Co.,Ltd

Miniature linear screw adjustment, lightweight gear drive lifting, lightweight screw mechanism for lifting, micro worm gear screw actuators Features 1. Lifting Force 2.5kN. Under max. lifting force, drive torque 1.2Nm (high speed), 0.4Nm (low speed). 2. Lifting screw diameter 16 mm, pitch 4 mm. 3. High gear ratio 1/4, low gear ratio 1/16. 4. Translating screw, travelling nut rotating screw, keyed translating screw configurations in upright or inverted mounting orientations. 5. Precision positioning, self-locking lead screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems. 6. Hand-operated screw jack by hand wheel or crank handle, or electric driven screw jack by 3-phase or single phase motor or gear reduction motor. 7. No standard lead screw travel length, all lead screw travel length is processed according customers requirements. Maximum permissible 300mm travel length. 8. Lead screw end fittings include top plate, clevis end, plain end and threaded end. 9. Individually or multiple screw jack lift system arrangements are available. Applications Micro-miniature screw jacks matching mini bevel gearboxes with parts are composed of small screw jacks lifting system, which widely used in beverage can conveyor systems height adjustment and beverage can washing area of the production line, saving man-hours and lowering the down time, crucial for increasing output and are extremely pleased with the recent financial benefits. Prior to the upgrade when the can washer area on each line required to be changed to accommodate a run taller or shorter cans the conversion would be completed manually. Small screw jack lifting systems is utilized several stages for washing and blow drying the cans. Suitable for lifting height adjustment and washing in aluminium can production lines, magnetic conveying systems, steel can line, aluminium can line, food can line, upgrade fill and packaging line, conversion steel aluminum can line, bottle conveyor systems, case and pallet conveyor systems.

Miniature linear screw adjustment, lightweight gear drive lifting, lightweigh...

Jacton Electromechanical Co.,Ltd

Mini worm gear screw jack, mini machine screw jack, micro worm drive lifting ...

Jacton Electromechanical Co.,Ltd

Mini screw jack lifting, micro worm gear screw lifter, micro screw jacks, min...

Jacton Electromechanical Co.,Ltd

Micro lift jack, small screw jacks, 2.5kn mini worm gear screw jack, mechanic...

Jacton Electromechanical Co.,Ltd

Small worm gear jack, acme miniature screw jack, miniature lifting jack screw...

Jacton Electromechanical Co.,Ltd

Light weight screw lift equipment, 16mm screw jack gearbox, micro motor screw...

Jacton Electromechanical Co.,Ltd

Micro lifting mechanism, light duty screw jack, light weight miniature jacks,...

Jacton Electromechanical Co.,Ltd

Miniature lifting screw jack, light duty screw jack rod, miniature screw jack...

Jacton Electromechanical Co.,Ltd

Smallest cubic screw jack, miniature wormgear screw jack, 2.5kn cubic screw j...

Jacton Electromechanical Co.,Ltd

Mini screw lift jack, miniture lifter mechanism, light duty gear jack, light ...

Jacton Electromechanical Co.,Ltd

Miniature screw jacks, miniature acme shafts jack, small worm gear jack screw...

Jacton Electromechanical Co.,Ltd

machine screw jack,electric machine screw actuator,electrical mechanical actuators,manual actuator lifts features: 1. Lifting force 2.5kN to 1000kN. Under max. lifting force, input shaft required torque, high ratio 10.83Nm to 2040Nm, low ratio 0.42Nm to 1278Nm. 2. Machine screw diameter 12 mm to 150 mm, screw pitch 3 mm to 20 mm. 3. Worm gear ratio 1/5 to 1/36. 4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation. 5. Heavy duty, precision positioning, self-locking machine screw, low efficiency, low frequency, low travel speed, low duty cycle. 6. electric machine screw jack by 3-phase or single phase electric motor/gearmotor, manual machine screw jack by handle/crank. 7. Machine screw ends include top plate, clevis end, plain end and threaded end. 8. Individually or multiple machine screw jack lift system arrangements are available. 9. Application in steel, pipe, tube, plate, roll forming roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.

machine screw jack,electric machine screw actuator,electrical mechanical actu...

Jacton Electromechanical Co.,Ltd

Similar to Solar tracking screw jack, ball screw jack applications solar panels, solar screw jack, screw jack type solar tracker motor, solar jacks and actuators suppliers and manufacturers in china (20)