2. Mitre Saw
• When using the mitre
saw always wear safety
goggles and a dust
mask. Long hair should
be tied back and always
keep the safety guard
on the blade until finally
in use. Always check the
blade is lined up
correctly before cutting
to ensure accuracy.
3. Jig-Saw
• When using the jig-saw
always wear safety goggles
and a dust mask. Long hair
should also be tied back.
Makes sure to start the saw
before cutting into the
wood to prevent the blade
from snapping. Also keep
the power cable behind the
saw to prevent it getting
tangled of possibly cut. Be
sure that hands are kept out
of the way to avoid
accidents.
4. Power Drill
• When using a power
drill make sure the
battery has enough
power for the job. Wear
safety goggles to avoid
possible dust getting
into the eyes. Make
sure that the drill bit is
attached properly
before drilling.
5. Claw Hammer
• Always wear safety
goggles when using a
claw hammer to
prevent injury. Never
hold the end of the nail
and stay focused to
prevent injury.
