Control Engagement Flow Diagram Of The Project Management...

Control Engagement Flow Diagram Of The Project Management...
Figure 5. Control Engagement Flow Diagram I. Inputs: In the project management plan, information
as to the process and phases of a project is enclosed. The plan addresses human resource
requirements, the methods of how work will be performed in addition to the requirements and
modus operandi for communicating among stakeholder (PMBOK, 2013). The documents used in
the plan guides a manager "through managing and controlling project activities" (Dow et al., 2015,
p. 113). The issue log, work performance data, and project documents are updated on a regular basis
throughout the project cycle. Work performance data is used to measure project activities
performance and deliverables in the form of percentage, start and finish dates, actual cost, durations,
and so forth. Project documents are used to support the inputs for controlling stakeholder
engagements and as previously stated the issue log address old and new issues throughout the cycle
of the project (PMBOK, 2013). II. Tools & Techniques Managing information is necessary in order
to maintain consistency. Information management system is a tool used to ensure that all reports and
data are captured. Information systems allow for consolidation and distribution of information to
stakeholders. Information systems also have the capability of issuing reports in various formats
(PMBOK, 2013). Expert Judgement and Meetings are both important to controlling stakeholder
engagement through the use of skillful assessment and
... Get more on HelpWriting.net ...

Energy Efficient Offloading With Flow Control
ENERGY EFFICIENT OFFLOADING WITH FLOW CONTROL IN WIRELESS NETWORKS
S.Hariprasath M.E.,/Assistant Professor,
Computer Science and Engineering,
Bharathiyar Institute of Engineering for Women,
Salem,India.
hariprasath1989@gmail.com
Abstract – Network developing and Virtualization rising more and more in indoor Environment
(POIs) can provide plenty of bandwidth and computing resources. At the same time people are
suffering from the mobile device with limited resources. This leads to a novel local cloud computing
paradigm in which mobile device can leverage nearby resources to facilitate task execution. Cloud
computing is a computing resources such as processing, memory, and storage are not physically
pres¬ent at the user's location. ... Show more content on Helpwriting.net ...
The cloud enables the data center to operate like the Internet and computing resources to be
accessed and shared as virtual resources in a secure and scalable manner. Like most technologies,
trends start in the enterprise and shift to adoption by small business owners.
R.Vaishnavi /M.E Student,
Computer Science and Engineering,
Bharathiyar Institute of Engineering for Women,
Salem,India.
vaishnavi.rahul@gmail.com
The goal of cloud computing is to apply traditional supercomputing, or high–performance
computing power, normally used by military and research facilities, to perform tens of trillions of
computations per second, in consumer–oriented applications such as financial portfolios, to deliver
personalized information, to provide data storage or to power large, immersive computer games.
Feed cloud (FC), which is the key role of feed prefetching and pushing. In the FC, there is the main
feed base (FB), which stores all pre fetched feed contents, including the XML–based updates of the
feed and all text, image, and multimedia contents of the original website. There is also a tempFB,
which temporarily stores new feeds, and once it is accessed by a required number of users, it will be
moved to FB. Every user has their own habit on mobile reading while she may be also in varying
mobility conditions.
II.RELATED WORK
A Survey of Mobile Cloud Computing: Architecture,

Sequence Of A Sequence Structure
Sequence
Basically in a sequence structure the action leads to the next ordered action in an
encoded/programmed order. Sequence can include any numbers of actions; however no actions can
be missed or skipped in the sequence. When the program runs it must execute each action in order to
be not missing or skipping an action. Sequence, selection and loop are the main vital structures used
to solve any logic problems in programming by forming algorithms.
Iteration
An iteration which is a processor loop that goes through a set of guidelines or commands that gets
executed over and over so gets repeated again.
Iteration is moreover one of core 3 simple programming constructs.
Iteration comprises the utilization of 2 variables that are known ... Show more content on
Helpwriting.net ...
This process is exactly the same as the section statements if its correct so true the code within the
body of "while loop" is executed by that I mean the code inside the braces. And afterwards the test
expression is checked to see if the test expression is true or not and the procedure will continue until
the expression itself becomes incorrect false.
While loop
While loop and do while are used quite also in programming while loop itself executes a function
that is specified by the programmer and it will keep on going on until the function is true itself.
What while loop does is firstly it tests the specified/given instructions by the user/programmer and
then it performs the function.
/*C program to demonstrate the working of while loop*/ #include <stdio.h> int main(){ int
number,factorial; printf("Enter a number.
");
scanf("%d",&number); factorial=1; while (number>0){ /* while loop continues util test condition
number>
0 is true */ factorial=factorial*number; ––number; } printf("Factorial=%d",factorial); return 0; } –
Example of while loop taken from internet
Do while loop
Now moving on to a do while loop a do–while loop is a kind of loop which is some sort of control
statement the kind of a loop which has test at the bottom rather than the top like other
The syntax for this loop is
Do { Statements
} while (condition);
The job of the do while loop firstly the statements are

Cis 324 Midterm and Answers Essay
User | | Course | C++ Programming I | Test | Week 5 Midterm Exam | Started | 11/12/12 5:06 PM |
Submitted | 11/13/12 10:28 PM | Status | Completed | Score | 64 out of 100 points | Time Elapsed | 2
hours, 0 minute out of 2 hours. | Instructions | The midterm exam consists of multiple choice
questions. You will have 2 hours to complete it. Good Luck! | Question 1 0 out of 2 points | | | Study
the following code snippet: int greater_num(int num1, int num2) { if (num1 < 0 || num2 < 0) {
cout << "Only POSITIVE Numbers!!!"; return 0; } else { if (num1 <= num2) { return num1;
} else { return num2; } } } Which of the following describes a constraint on the use of this ... Show
more content on Helpwriting.net ...
Which of the following is the best choice for the declaration of this function?Answer | | | | | Selected
Answer: | double area(double w, double h) | Correct Answer: | double area(double w, double h) | | | | |
Question 12 2 out of 2 points | | | What is incorrect in the following code snippet? void
display_box(string str) { cout << "––––––––" << endl; cout << str << endl;
cout << "––––––––" << endl; } int main() { cout << display_box("Hello World");
return 0; }Answer | | | | | Selected Answer: | display_box does not return a value; therefore, it cannot
be used with cout <<. | Correct Answer: | display_box does not return a value; therefore, it
cannot be used with cout <<. | | | | | Question 13 2 out of 2 points | | | Which of the following
variables is used to store a condition that can be either true or false?Answer | | | | | Selected Answer: |
Boolean | Correct Answer: | Boolean | | | | | Question 14 0 out of 2 points | | | Assuming that a user
enters 5 as the age, what is the output of the following code snippet? int age = 0; cout <<
"Please enter your age: "; cin >> age; if (age < 10) { cout << "Kid" << endl; } if
(age < 30) { cout << "Young" << endl; } if (age < 70) { cout << "Aged"
<<

Network-Based Network Essay
1. Introduction
As the number of modules in Systems–on–Chip (SoCs) increases, bus based interconnection
architectures may prevent these systems to meet the performance required by many applications.
For systems with intensive parallel communicat–ion requirements buses may not provide the
required bandwidth, latency, and power consumption. A solution for such a communication
bottleneck is the use of an embedded switching network, called Network–on–Chip (NoC), to
interconnect the modules in SoCs. NoCs design space is considerably larger when compared to a
bus–based solution, as different routing and arbitration strategies can be implemented as well as
different organizations of the communication infrastructure.
A network–on–chip is composed of three main building blocks. The first and most important one are
the links that physically connect the nodes and actually implement the communication. The second
block is the router, which implements the communication protocol. The last building block is the
network adapter (NA) or network interface (NI). This block makes the logic connection between the
cores and the network, since each core may have a distinct interface protocol with respect to the
network.
A communication link is composed of a set of wires and connects two routers in the network. Links
may consist of one or more logical or physical channels and each channel is composed of a set of
wires. A NoC link has two physical channels making a full–duplex connection between

The Between The Atrium Aspect Ratio Under Different Heat...
Figure ‎
2.6 Numerical experiment N.B with fire at atrium at 250 Sec [9]
Figure ‎
2.7 Physical model P.M with fire at atrium at 250 Sec. [9]
It was concluded that the height of the atrium and the fan locations have obvious effect on the
efficient abstraction. Atrium with height more than 30 m with exhaust fans located towards the ends
may require attention to control the smoke abstraction efficiently.
Yi, Hou, Li and Feng & Chow [13] study the relation between the atrium aspect ratio under different
heat release rate of fire the flooding time flow of smoke occurs and, 32 simulations were performed
using a model, FDS (Fire Dynamics Simulator, Version 3). Table 2.4 shows the size of the atrium
and HRR of steady fire. For the all simulations, (3×3×3) meter fire room was used, the fire was at
the center of the floor of the fire room, and 27 m height atrium. The vents in the fire floor were both
(2×1.5) meter with located at 1 m above the floor with 20 oC ambient temperature.
Figure 2.8 listed the early stage situation of the fire in a floor near to an atrium. The fire floor has 2
vertical vents named WA and WB and there are open to both the atrium and outside. The atrium
ceiling is open, and it is assumed that there is an ideal isolation between the atrium and the adjacent
floors.
At fire early stage, the smoke moves to outside and the atrium, and air from outside and the atrium
moves inside the fire floor at the same time from the 2 vents. Figure 2.8 shows the

Equals Sign and Expo Class Method Essay
PreAPCS Exposure Java Exercises 05.01– 04 Date:1/15/14 Name: Anam Nawab Period: 4th 1.
What Expo class method would you use to enter someone's name? System.out.print("Enter name
===>> "); 2. Why is a prompt necessary for program input? Without a prompt, the user would just
see the cursor flashing on the screen and have no idea what to enter. Chances are the user would not
even know he/she is supposed to enter something. With the prompt, the user knows not only that
he/she is supposed to enter something; he/she will also know what they are supposed to enter. 3.
What does the enterString method do? The enterString method "reads" in an entire string of
characters from the keyboard until the key is pressed. ... Show more content on Helpwriting.net ...
When you are about 70 miles from Dallas, shortly after you pass the town of Hillsboro the highway
forks. It splits in two. You need to decide between going left which means you will take I35W
(Interstate 35 West) to Fort Worth or going right which means you will take I35E (Interstate 35 East)
to Dallas. 25. Explain Repetition. Another common application occurs when repetition is required. A
grade book program needs to average grades for every student in a class of twenty–five students. A
payroll program needs to process paychecks for many employees. Practically everything you can
imagine is done multiple times. Nobody is interested in repeating program source code 500 times
for some task that is to be performed 500 times. We want to create one program segment, and place
this segment in some type of loop control structure that repeats 500 times. 26. What do Selection
and Repetition control structures have in common? Both the selection control structure diagrams
and the repetition diagram indicate a change of program flow occurring after some condition 27.
What is the essence of understanding, and using, control structures? . Understanding conditional
statements is the essence of understanding, and using, control structures. However, before we
plunge into the syntax of the various conditional statements, you need to understand the relational
operators that are used by Java in the conditional

Using Flow Control Increase The Convergence Time
By using Flow Control to decrease the Convergence Time in UPPM
M.ASHOK KUMAR1 E.S.PHALGUNA KRISHNA2 1. PG STUDENT, DEPARTMENT OF CSE,
SREE VIDYANIKETHAN ENGINEERING COLLEGE
2. ASSISTANT PROFESSOR, DEPARTMENT OF CSE, SREE VIDYANIKETHAN
ENGINEERING COLLEGE Abstract:
In this paper, we focus the Flow Control for traceback that will minimize the amount of packets
required for build up the attack path. Flow control based mechanism merged with Uniform
Probabilistic Packet Marking (UPPM), the stream of packets can be controlled that suggests the
amount of packets checked by UPPM will get reduce there by decreasing the convergence time.
Then again, this strategy should bring about full traceback on an attacker. Keywords:
Ip traceback, Network Security, Packet Marking, Autonomous System, Convergence Time
Introduction
IP traceback suggests the capacity of perceiving the genuine wellspring of any packet sent over the
Internet. By virtue of the shortcoming of the first blueprint of the Internet, we will be not able to
find the genuine developers at present. To be completely frank, IP traceback arrangements are seen
as productive if they can perceive the zombies from which the DDoS attack packets entered the
Internet. Various techniques to tracebak the start of the attack including link testing, controlled
flooding, ICMP traceback and different packet marking methodologies. Packet marking techniques
are used as a piece of this paper. Packet marking means

How Are You Currently Meeting Your Goals?
Examine the category Fit in your weekly plan. How are you currently meeting your goals? To begin
with I have been heavily focusing within my fit category this week. I've notice I been consuming a
mass amount of sugar lately. On Monday I rested because I just got home from a trip from out of
town. However I went hard on Tuesday, I've been working out for about two years and have been
creating certain routines for me to do. I've been doing this 22 push up challenge that I have been
seeing all over social media. I already completed the challenge however I love to continue doing
these 22 push–ups until I feel as if I can complete this task without breaking a sweat. My biggest
struggle on my body are my abs. I been trying to reach this goal ... Show more content on
Helpwriting.net ...
Having the fact that we had a four day weekend completely threw me off my game. I felt less
focused and stressed in completing all of my assignments. In the contrary I do feel accomplish with
every assignment I complicated and it help push myself to do more. In the beginning I was thrown
off but I manage to find my way all on my own. I did have a few setbacks for me this week that I
wasn't expecting. I originally had a meeting this week for a project I was going to be working on
with an app developer within the area, however I learned that mixing business with pleasure was a
huge mistake and now I am no longer on this project. I also made the mistake of thinking I had class
this week on Tuesday and not Thursday so I unfortunately wasn't able to accomplish the certain
goals I have set for myself this week such as filming a video for my Youtube channel. This week the
cons certainly outweighed the pros.
How did these successes impact your life (your mood, motivation, self–esteem, relationships, etc.)
Moreover, I did not have a lot of success this week besides accomplish my school work and being
able to keep myself on track. If I wasn 't the type of person who tries to find the light within the dark
I was say this week was a failure, but since I manage to keep a strong head on my shoulders and
power through I felt accomplish. The only time this week where I felt just calm and normal is
showing up for classes and totally let myself forget about the mistakes

C + Based Banking System Application Essay
C++ BASED BANKING SYSTEM APPLICATION
SUBMITTED BY :KUSHAGRA MISHRA PROJECT GUIDED BY:MR.RAJESH KUMAR
COURSE:B.TECH CSE
ENROLLMENT NO :A12405213030
DESCRIPTION: This is a C++ based BANK MANAGEMENT PROGRAM.With the help of this
user can create,modife,delete,update,withrawl,deposit,as per there requirement.We have used
various functions to perform above function of creating,modifying,deleteing,updating etc.
So,this program is based as per to fulfill the needs of bank customer.
#include<fstream.h>
#include<ctype.h>
#include<iomanip.h>
#include<conio.h>
#include<stdio.h>
//***************************************************************
// CLASS USED IN THIS BANK MANAGEMENT PROGRAM
//****************************************************************
class account
{
int acno_info; char namegiven[50]; int deposit_kush; char type; public: void create_accountkush();
//function to get the data from the user . void show_accountkush(); //function to show data on the
screen . void modifykush(); //function to get new data from user. void depkush(int); //function to
accept amount and add to balance amount. void drawkush(int); //function to accept amount and
subtract from balance amount. void report(); //function to show the given data in tabular form.

Methods Of Selection Statements: Böhm And Jacopini
Selection Statements
A selection statement offers the methods of selecting among two or more execution paths within a
program. These statements are basic and essential parts of all languages, as proven by Böhm and
Jacopini.
The two basic categories of selection statements are:
Two–way selectors (if–statement) o Design Issues o Control Expression o Clause Form o Nesting
Selectors o Selector Expressions
Multiple–way selectors (case–statement) o Design Issues o Examples of Multiple Selectors o
Implementing Multiple Selection Structures o Multiple Selection Using if
Figure 4.2.1: Example of Selection Statement
Two–Way Selection Statements
Even though the two–way selection statements of present languages are similar, here some
differences ... Show more content on Helpwriting.net ...
Another coded conditional branches is to place the case values and labels in a table. And also, use a
linear search by a loop to find the exact label. It needs a less space better than the coded
conditionals.
Multiple Selection Using if
In multiple situations, a switch or case statement is very poor for many selection. For example, once
selections should be complete on the beginning of a Boolean expression rather than certain ordinal
type, nested two–way selectors might be used to pretend a multiple selector. To ease the poor
readability of nested two–way selectors, few languages, like Perl and Python, have been prolonged
for particular use. The extension accepts some of the words to be left out. In specific, else–if
sequences are changed with one special word, and the ending with special word on the nested when
it is dropped. The nested selector is called an else–if clause.
Let us consider the Python selector statement if count < 20 : bag1 = True elif count < 200 : bag2 =
True elif count < 2000 : bag3 = True
Note: else–if is written as elif in Python language
The equivalent Python selector statement is if count < 20 : bag1 = True else : if count < 200 : bag2 =
True else : if count < 2000 : bag3 =

The Indifference Between Life And Death In The Stranger By...
"The opposite of love is not hate, it's indifference. The opposite of faith is not heresy, it's
indifference. And the opposite of life is not death, but indifference between life and death." – Wiesel
Similarly, there are people who are indifferent to everything surrounding them. Throughout the
work of philosophical fiction, entitled The Stranger, by Albert Camus, the author employs how
Meursault ... Show more content on Helpwriting.net ...
Throughout the novel, we see him being apathetic towards the people of the society, his mother, his
girlfriend, and his neighbors. He does not seem to care too much about social norms. He views the
world from a different perspective. He stands for what he believes in. He does not get overwhelmed
with any types of emotions. Although sometimes he does try to view the world as others do, but
maybe that is too late for him to do. Before his execution, the Chaplain comes to try to make him
believe in the faith, pray for forgiveness but he refuses how he refused the magistrate. He does not
think it is a necessary thing for him to do. He does not support the idea of forcefully believing
something. At the very end of the novel he says, "For all to be accomplished, for me to feel less
lonely, all that remained to hope was that on the day of my execution there should be a huge crowd
of spectators and that they should greet me with howls of execration" (Camus, 75). The quote is said
by Meursault as he feels that he deserves the disdain of the society because he is different from
others. Literary element tone is noticeable in this quote as it shows the change of the emotion of
Meursault. He does not think the same way as the people in his society does. He is an outcast and he
knows that is why he is being punished for it. He truly believes that on the day of his

Plsql Chap7 Sols Essay
PL/SQL Chapter 7 Solutions
Review Questions
1. B
2. D
3. A,D
4. C,D
5. B,D
6. A
7. C
8. D
9. A
10. D
11. The user_objects view can be used to determine all the packages that exist in the database. In the
query, use a WHERE clause to select the rows that contain the term 'PACKAGE' in the object type
column. Selecting the text column of the user_source view will list all the source code lines in the
package. Use a WHERE clause on the name column to select a single package.
12. If there are values referenced continually in the application, storing them in packaged variables
will allow the values to only be retrieved once thus saving data retrieval processing. The values in
global constructs are persistent for the entire user session. ... Show more content on Helpwriting.net
...
END;
/
SELECT order_info_pkg.ship_name_pf(idBasket) FROM bb_basket WHERE idBasket = 12;
Assignment 7–3
CREATE OR REPLACE PACKAGE order_info_pkg IS PROCEDURE basket_info_pp (p_basket
IN NUMBER, p_shop OUT NUMBER, p_date OUT DATE, p_name OUT VARCHAR2);
END;
/
CREATE OR REPLACE PACKAGE BODY order_info_pkg IS FUNCTION ship_name_pf

(p_basket IN NUMBER) RETURN VARCHAR2 IS lv_name_txt VARCHAR2(25); BEGIN
SELECT shipfirstname||' '||shiplastname INTO lv_name_txt FROM bb_basket WHERE idBasket =
p_basket; RETURN lv_name_txt; EXCEPTION WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE('Invalid basket id'); END ship_name_pf; PROCEDURE
basket_info_pp (p_basket IN NUMBER, p_shop OUT NUMBER, p_date OUT DATE, p_name
OUT VARCHAR2 ) IS BEGIN SELECT idshopper, dtordered INTO p_shop, p_date FROM
bb_basket WHERE idbasket = p_basket; p_name := ship_name_pf(p_basket); EXCEPTION WHEN
NO_DATA_FOUND THEN DBMS_OUTPUT.PUT_LINE('Invalid basket id'); END
basket_info_pp;
END;
/
SET SERVEROUTPUT ON
DECLARE
lv_name_txt VARCHAR2(20); lv_id_num NUMBER(4); lv_ord_dat DATE;
BEGIN
order_info_pkg.basket_info_pp(12,lv_id_num, lv_ord_dat, lv_name_txt);
DBMS_OUTPUT.PUT_LINE(lv_name_txt); DBMS_OUTPUT.PUT_LINE(lv_id_num);
DBMS_OUTPUT.PUT_LINE(lv_ord_dat);
END;
/
Assignment 7–4
CREATE OR REPLACE PACKAGE login_pkg IS pv_id_num NUMBER(3); pv_zip3_num
NUMBER(3); FUNCTION login_ck_pf (p_user IN VARCHAR2, p_pass

Use Of Ishiguro's Control Of This Flow In The Remains Of...
Discuss Ishiguro's control of this flow in The Remains of the Day, paying particular attention to the
movement between distant and recent past. One great Dr. Gallegos, once informed me on an
assignment that 'One mark of a skilled novelist is the way in which he or she controls the flow of
information given to the reader.' This shows to be evident in the storytelling of "The Remains of the
Day", written by Kazuo Ishiguro. Ishiguro possesses the information of the story but reveals it when
Stevens reminisces of the past. Why are people so interested about time traveling to the past, when
our brains already hold all our memories for us? It is a rather cool thing to be able to tell stories
from your past that interest other people. Think about

Friday 's Child Is A Non Profit Program
For my Family Service Report, I met with and talked to Katie Conklin, Director of Services for the
program Tuesday's Child. Tuesday's Child is a non–profit program that is operated out of DePaul
College Prep. The program was established as a means to help parents with children ages 18–
months to 6–years–old who are experiencing behavioral issues. The training is completed with both
parent and child, and done with one–to–one peer assistance––with each family being paired with
their own counselor. The individualized attention ensures that each family is given the appropriate
amount of assistance to problem solve their specific needs. Tuesday's Child's mission statement is as
follows: "Tuesday's Child enables families to thrive through positive parent training, inclusive
behavioral classrooms and support services. Our proven model impacts home, school, and the
community." With the majority of their student population ranging from ages 4–6, many of the
behavioral issues that are seen at Tuesday's Child are challenges such as children who are unable to
take "no" for an answer, struggles with mealtime or bedtime, or difficulties in childhood peer
interaction. The source of these behavioral issues ranges from diagnosable disorders such as autism
(although Tuesday's Child does not serve as a diagnosis center) to less specific issues with children
who are verbal and smart, but don't fit into behavioral norms. Regardless of what category the
children might fall into, Tuesday 's Child

graded assignments Essay
PT1420
Introduction to Programming
GRADED ASSIGNMENTS
Graded Assignment Requirements
This document includes all of the assignment requirements for the graded assignments in this
course. Your instructor will provide the details about when each assignment is due.
Unit 1 Assignment 1: Homework
Learning Objectives and Outcomes
Describe the role of software for computers.
Identify the hardware associated with a computer.
Describe how computers store data.
Explain how programs work.
Differentiate among machine language, assembly language, and high–level languages.
Differentiate between compilers and interpreters.
Identify the different types of ... Show more content on Helpwriting.net ...
Use compound logical conditions.
Assignment Requirements
Do the following problems:
Algorithm Workbench Review Questions 6–10, starting on page 159
Programming Exercises 5 and 8, starting on page 160
Required Resources
Textbook
Submission Requirements
Submit your written answers to your instructor at the beginning of Unit 7.
Use pseudocode/flowcharts to represent repetition structures.

Create While, Do–While, and Do–Until conditional loops.
Describe the implications of an infinite loop.
Answer:
Short Answer Review Questions 1–5, starting on page 213
Algorithm Workbench Review Questions 1, 2, 7, and 8, starting on page 213
Programming Exercises 1, 3, and 4, starting on page 214
Required Resources
Textbook
Submission Requirements
Submit your written answers to your instructor at the beginning of Unit 8.
Use pseudocode/flowcharts to represent repetition structures.
Evaluate counter–controlled For loops.
Use sentinel values in creating computer programs.
Use nested loops in a program.
Answer:
Short Answer Review Questions 6–10, starting on page 213
Algorithm Workbench Review Questions 3, 4, 9, and 10, starting on page 213
Programming Exercises 7, 9, and 10 starting on page 215
Required Resources
Textbook
Submission

What I Learned From Your Book
Jiaxin Cheng
LSU ID: 893952268
ENGL 1001
21/09/2016
Dear Professor Csikszentmihalyi,
This letter is talking about what I learned from your book, my flow experiences and what are
elements of flow in my opinion. But before that I would like to share a old Chinese fairy tale with
you. 1800 years ago in Jin dynasty of China, there was a farmer who's name is Wangzhi. One day he
went out to cut firewood in hills, he saw there are an old man and a child playing the GO (a Chinese
game) in pavilion. So he left his axe on a stump and watched them playing. He was so focus on the
game that he totally forgot the time. After a long time, the child told him that as it is so late you had
better go home. Then Wangzhi pick up his axe and start to go home. He was so surprised that his
axe handle was rotted and mold. When he backed home his neighbor told him he had already went
out more than 10 years. Of cause fairy tales are not always true story and also may sound like an
exaggeration. But in this fairy tale we can know that Chinese people realize that people have flow
experience hundreds years ago.
In this semester we have been discussing about Optimal Experience and what is Flow and how to
achieve it in class. I learned that you named the psychological concept of flow, a highly focused
mental state. In your seminal work, Flow: The Psychology of Optimal Experience, you outline your
theory that people are happiest when they are in a state of flow – a state of concentration or

Comp230-Intro to Scripting Essay
Week 1 Week 1 – Quiz A 1. The name of the service that controls the queue of print jobs with the
Window NET command is ______. SPOOLER 2. Which of the following Windows commands will
shutdown and restart your computer in 2 minutes? Shutdown –r –t 120 3. Which Windows
shutdown command switch is sued to log off the current user of the local computer? –l 4. Which one
of the following Windows AT commands specifies an action that will take place at 3:00 p.m.? At
15:00 command 5. From the Start/Run dialog, the command used to open the 32–bit Windows
command prompt is ______. cmd 6. The Windows CLI command used to turn off the display of the
current command in a batch file is ______. @command Week1 – Quiz B 1. Which ... Show more
content on Helpwriting.net ...
ServiceName? DELETE 2. The netsh command that will set the IP Address of the interface name
"NIC" to 192.168.100.10 255.255.255.0 with a metric of 1 is _____. netsh interface ip set address
"NIC" source=static 192.168.100.10 255.255.255.0 1 3. Which of the following Windows
commands will shutdown and power down the computer FileServer in 2 minutes? shutdown –s –m
FileServer –t 120 4. Which one of the following Windows AT commands specifies an action that
will take place at 3:00 p.m.? at 15:00 command 5. The Windows CLI command that is used to
display the search path for the executable files is _____. path 6. The Windows CLI command used
to turn off the display of the current command in a batch file is _____. @command Week 1 – Quiz
G 1. Which one of the following Windows NET commands will allow other computers to access the
C:Data directory under the share name UserData? NET SHARE UserData=C:Data 2. The netsh
command that will set the IP Address of the interface name "NIC" to a DHCP supplied IP address is
_____. netsh interface ip set address "NIC" source=dhcp 3. Which Windows shutdown command
switch is used to log off the current user of the local computer? –1 4. Which Windows shutdown
command switch is used to shutdown and turn off a local or remote computer? /s 5. From the
Start/Run dialog, the command used to open the 32–bit Windows command prompt is _____. cmd
6. The Windows CLI command

Assignment
#include (–– removed HTML ––)
using namespace std;
class Node {
int data;
class Node * next;
public:
//Default constructor for Node
Node() { data = 0; next = NULL; }
Node(int data) { this–>data = data; next = NULL; }
Node * getNext() { return next; }
void setNext(Node * next) { this–>next = next; }
int getData() { return data; }
};
class List {
class Node *head;
unsigned int size;

public:
List() { head = NULL; size = 0; }
//append to end of the list
void append(int data) {
//create a new node and set data
class Node * temp = new Node(data);
//traverse till end of the list
class Node * ptr = head;
while (ptr != NULL && ptr–>getNext() != NULL) {
ptr = ... Show more content on Helpwriting.net ...
d int count = 0;
//check if position entered is valid
if (pos > size) {
cout << "Invalid position entered" << endl;
return NULL;
}
class Node * ptr = head;
while (count != pos) {
ptr = ptr–>getNext();
count++;
}
return ptr;
}

//print all the current keys to command line in one line
void printAll() {
unsigned int i;
class Node *ptr;
for (i = 0; i < size; i++) {
ptr = get(i);
cout (–– removed HTML ––) getData() << " ";
}
cout << endl;
}
};
int main() {
List *list = new List();
string line;
//replacing std input with content of data.txt
freopen("data.txt", "r", stdin);
//read first line
getline(cin, line);
char data[100] = "0";
char ps[100] = "0";
int num, i = 0, j = 0;
//append elements to list
while (line[i] != '0') {

if (line[i] >= '0' && line[i] <= '9') {
j = 0;
//extract a number
while (line[i + j] != '0' && line[i + j] != ',') {
data[j] = line[i + j];
j++;
}
data[j] = '0';
num = atoi(data);
list–>append(num);
if (line[i + j] == '0')
break;
i = i + j;
}
i++;
}
//read second line
getline(cin, line);
i = 0;
j = 0;
//delete elements from list
while (line[i] != '0') {
if (line[i] >= '0' && line[i] <= '9') {

j = 0;
//extract a number
while (line[i + j] != '0' && line[i + j] != ',') {
data[j] = line[i + j];
j++;
}
data[j] = '0';
num = atoi(data);
list–>del(num);
if (line[i + j] == '0')
break;
i = i + j;
}
i++;
}
//read third line
getline(cin, line);
i = 0;
j = 0;
int pos = 0;
//inserting

Characteristics Of A Spaghetti Code
Spaghetti Code. Spaghetti code is a term use for poorly written code. It can be code that is difficult
to understand, poorly organised, long–winded or as some articles suggest its code that make use of a
lot of goto statements within the code (Church M, 2012). According to Boronczyk T (2011)
Spaghetti code has a few characteristics; It is code that is writing quickly and doesn't follow an
acceptable standard. It is code that has a lot of goto statements in. It can be code written by someone
just learning to code. Another characteristic of Spaghetti code is after you digested the code you feel
fatigue. The biggest contribution I found Spaghetti Programming made to modern methods of
coding is that developers realise that structuring code neatly ... Show more content on
Helpwriting.net ...
Applications can be created quicker by allowing teams of developers working on different parts of
the project. Proven modules can be re–used, saving time and increase reliability. Fixing errors are
made easier by replacing individual parts rather than big amounts of the code. By using structured
programming one can also reduce the necessity of using the goto statement. Modular programming.
Modular programming is a technique where very long and complex programmes are split up in to
smaller parts – modules. Each of the modules is designed to perform is certain task or function.
These modules have certain characteristics , Dussad V (2010): A module is a complete programme
in itself Each module is designed to perform a certain task The modules can to compiled and tested
individually without using other modules. But a module can also interact with other modules.
Modules can be redesigned and programmed so that they can be used in other applications or
systems. This method of programming has allowed developers to create more complex systems or
applications. The smaller pieces or modules can be tested easier and created by different developers
at the same

Grammar Rules : Notes : Public Class Tinyparser
public class TinyParser { /* Grammar Rules: program –> stmt–sequence stmt–sequence –> stmt {;
stmt} stmt –> if–stmt |repeat–stmt | assign–stmt | read–stmt | write–stmt if–stmt –> if exp then stmt–
sequence [ else stmt–sequence] end repeat–stmt –> repeat stmt–sequence until exp assign–stmt –>
identifier := exp read–stmt –> read identifier write–stmt –> write exp exp –> simple–exp
[comparison–op simple–exp] comparison–op –> < | = simple–exp –> term {addop term} addop –>
+| – term –> factor {mulop factor} mulop –> *| / factor –> (exp) | number | identifier */ public static
TinyScanner myScanner = null; static Token token; static char t; //individual tokens public static
final int EOFtok = –1; public ... Show more content on Helpwriting.net ...
else if(token.getType() == REPEATtoken){ if(!repeat_stmt()) return false; } //read–stmt else
if(token.getType() == READtoken){ if(!read_stmt()) return false; } //write–stmt else
if(token.getType() == WRITEtoken){ if(!write_stmt()) return false; } return true; } public static
boolean if_stmt(){ //if–stmt –> if exp then stmt–sequence [ else stmt–sequence] end
if(token.getType() == IFtoken){ if(!match(IFtoken)) return false; if(!exp()) return false;
if(token.getType() == THENtoken){ if(!match(THENtoken)) return false; } if(!stmt_seq()) return
false; } if(token.getType() == ELSEtoken){ if(!match(ELSEtoken)) return false; if(!stmt_seq())
return false; } if(token.getType() == ENDtoken){ if(!match(ENDtoken)) return false; } return true; }
public static boolean assign_stmt(){ //assign_stm –> identifier assign exp if(token.getType() == ID)
{ if(!match(ID)) return false; if(token.getType() == ASSIGN){ if(!match(ASSIGN)) return false; }
if(!exp()) return false; } return true; } public static boolean repeat_stmt(){ //repeat–stmt –> repeat
stmt–sequence until exp if(token.getType() == REPEATtoken){ if(!match(REPEATtoken)) return
false; if(!stmt_seq()) return false; if(token.getType() == UNTILtoken){ if(!match(UNTILtoken)); }
if(!exp()) return false; } return true; } public static boolean read_stmt(){ //read–stmt –> read
identifier if(token.getType() ==

Java And Jav Rename To Bpplustree Class Assumptions
import java.io.*; import java.util.*; /** * BPlusTree Class Assumptions: 1. No duplicate keys
inserted 2. Order tree_degree: * tree_degree<=number of keys in a node <=2*tree_degree 3. All
keys are non–negative * TODO: Rename to BPlusTree */ public class b_plus_tree { public node
root; public static int tree_degree; /** * TODO Search the value for a specific key * * @param key
* @return value */ public ArrayList (–– removed HTML ––) value_search(Double key) { // Return
if empty tree or key if(key == null || root == null) { return null; } // Look for leaf node that key is
pointing to leaf_node leaf = (leaf_node)tree_search(root, key); ... Show more content on
Helpwriting.net ...
ey); } } } return null; } } /** * TODO Insert a key/value pair into the BPlusTree * * @param key *
@param value */ public void tree_insert(Double key, String value) { if (root != null &&
value_search(key) != null ){ // Look for leaf node that key is pointing to leaf_node leaf =
(leaf_node)tree_search(root, key); // Look for value in the leaf for(int i=0; i<leaf.keys.size(); i++) {
if(key.compareTo(leaf.keys.get(i)) == 0) { leaf.update(i,value); } } return; } leaf_node newLeaf =
new leaf_node(key, value); key_node_map entry = new key_node_map(key, newLeaf); // Insert
entry into subtree with root node pointer if(root == null || root.keys.size() == 0) { root =
entry.getValue(); } // newChildEntry null initially, and null on return unless child is split
key_node_map newChildEntry = get_child(root, entry, null); if(newChildEntry == null) { return; }
else { index_node newRoot = new index_node(newChildEntry.getKey(), root,
newChildEntry.getValue()); root = newRoot; return; } } private key_node_map get_child(node
node, key_node_map

Apathy And Its Effects On Society
Apathy Indifferent. Detached. Desolate from any kind of emotion. This is how one "feels" when
apathy sneaks its way into their brain. Everything they have ever felt becomes a vague and distant
memory, a vast void. There is nothing that can be done, so it seems to the individual. This leaves
him/her quite helpless. And more often than not, the phrases "I don't care!", "Why does it even
matter?", and "It isn't important" are overlooked and are labeled rebellious. But should those phrases
not spark a greater concern? It must be terrifying to view a human being who carries on their lives
with lassitude. Whether or not they know wrong from right, their lack of care and concern instigates
negative consequences from loved ones and society. When one is empty of emotions, there is
nothing stopping them from doing wrong, but there is certainly nothing stopping them from doing
right. The notion that apathetic human beings need supervision, due to fear, needs to be reevaluated.
This concern for those with apathy must be aimed at the reason why. This way, individuals will have
a greater understanding of a realm that is so vastly hollow. Half way through this essay's first
paragraph, I had stopped caring and I had told myself it had not mattered and continued to sit in this
very seat, just staring at my laptop. It was a very foolish thing to tell myself, as I had barely begun
to type up this assignment. But why had I become apathetic, what were my reasons? One does not
simply stop

Pt1420 Assignment Essay
Short Answer 1) Why should you indent the statements in the body of a loop? Because by indenting
the statements in the body of the loop you visually set them apart from the surrounding code. This
makes your program easier to read and debug 2) Describe the difference between pretest loops and
posttest loops A pretest loop means to test its condition before performing an iteration A posttest
loop means it performs an iteration before testing its condition 3) What is a condition–controlled
loop? A condition–controlled loop uses a true/false condition to control the number of times that it
repeats 4) What is a count–controlled loop? A count–controlled loop repeats a specific number of
times 5) What three actions do ... Show more content on Helpwriting.net ...
le1 Sub Main() 'This program gets a budget for the user then display the amount the user is over or
under budget Dim monthlyTotal As Double = 0 Dim budgetAmount As Double = 0 Dim
sumAmount As Double = 0 'Getting the budget amount Console.WriteLine("What is your budget
buddy?") budgetAmount = Console.ReadLine() Console.WriteLine("Your budget is " &
budgetAmount) Console.ReadLine() 'This function gets all the expense for the month
getMonthlyExpenses(monthlyTotal) 'This module tells the user if they are over or under and by how
much calculatingTotals(monthlyTotal, budgetAmount, sumAmount) Console.WriteLine("Press enter
to continue") Console.ReadLine() End Sub Function getMonthlyExpenses(ByRef monthlyTotal As
Double) Dim anymore As String = "Y" Dim expense As Double = 0 Do While anymore =
UCase("Y") Console.WriteLine("Enter your expenses") expense = Console.ReadLine()
monthlyTotal = monthlyTotal + expense Console.WriteLine(" Do you have anymore expenses enter
y for Yes and n for NO?") anymore = Console.ReadLine() Loop Return monthlyTotal End Function
Sub calculatingTotals(ByRef monthlyTotal As Double, ByRef budgetAmount As Double, ByRef
sumAmount As Double) If budgetAmount <

The Role Of Media Management On Crisis Communication
The importance of media management in crisis communication
Introduction
Crisis according to Laura (2013, p. 51), can be defined as any situation that threatens harms or cause
panic among people. Crisis may occur due to accidents, war, and flood or fire attack. During this
period, the public, who may be affected by the crisis because they are found in the situation or their
next of kin are involved in it, rely on a lot of information that is relayed by the media. Because of
this, the media must be careful of what they report. The information that the media convey to the
public according to Laura (2013, p. 50) may cool the situation, and reduce the tension that has been
built by the parties concerned. However, if they are not mindful of ... Show more content on
Helpwriting.net ...
Literature review
Research has been done on the role the media should play during the crisis. Other people should
have
AuthorLastName3
also researched on how the media should play this role. For instance, Taffel, A., in the year 2007 did
research on how to enhance Public Relations During the crisis (Taffel 2011, p. 112). In his research,
Taffel observed that, it is necessary to monitor the information that is relied on the public so that, the
image of the agency that is in crisis is not tarnished. In his research, Taffel had suggested that the
organization must balance the information that o is relayed the public (Taffel 2011, p. 112). He
observes that, it is necessary to balance between truths and lies so that the level of tension is
reduced. In the research, taffel adds that, if the media is allowed to report on everything, they may
kill the reputation that the company has.
In 2011, Yan, J., Brooke, F. L and Lucinda, L. A. did a research on the role of the social media in
effective crisis management. The research had been prompted by the manner in which a lot of
propaganda was spread via the social media during the Arab spring (Yan, Brookes and Lucinder
2011, p.3). In the paper, the researchers observe that, crisis can be best managed by the medal if they
can control the information that they give to the public. The researchers observe that, if the media
gives information that is contradicting, the public may become more anxious.
Despite the fact

Product Flow Control Using Kanban Signals
Abstract:
Kanban is a Japanese term which means "visible record". This is the term used in production and
inventory control systems and methods which help us find out the answer or questions like: what
parts to manufacture, when to start manufacturing, when to stop manufacturing, how many to
manufacture and where to deliver them to.
Kanban works on a pull systems to automatically schedule more production without intervention of
Supervision nor Planning & Scheduling Department personnel. Kanban works for higher volume ,
repetitive products where setup time is short and there is great deal of demand certainty.
A pull system has advantages over push system, 1:It can be observed easily unlike push system 2:
Efficiency: ... Show more content on Helpwriting.net ...
Methodology:
The main idea of implementing the kanban signals is to improve the product flow in order to keep
up with the demands of the customers. The kanban system help in keeping the inventory to
minimum. The system does this because the supplier does not send the suppilies until they get an
order from the factory. A JIT production system is used which help in reducing the cost of inventory.
Kanban introduces efficiency in entire manufacturing process also it helps in worker empowerment.
The kanban system empowers line workers since they are the ones who manage the kanban cards.
When a worker in an assembly line sees that a kanban card related to the process has reached its
trigger level, he acts on the signal. The most important function of a kanban is that it instructs when
to produce parts. In a lean manufacturing environment, no production or parts movement takes place
without a kanban. Another key function is visual control; to identify what is in each box. Each box
of product should have a kanban attached to it. If there is a box without a kanban signal, then it
means that something is out of place. The third important function is inventory control. When we
use a kanban system, it is very easy to control the amount of finished product on hand. The number
of kanbans in the system will be

Records Management System
DESIGN BY SIMON MONTEVERDI Records Management System: The purpose of the records
management system is for the user to be able to store information in simple plain text files ready for
editing manually portable safety. The coding includes multiple functions that are of convenience for
the user. The system can be used to keep any records of information as is set out as a user
management system. The script begins with the creation of a main function which will become the
menu system. The 'while loop' is implemented so that the main system will allow the person to
either exit the loop or add a user. The main menu offers the user to either add a user to the records of
the system or to simply exit. The two options are created through their respective statements below:
The createUser function is used to initiate a list of information. The list will be used to hold on to all
the information inserted by the user for it to be added to the records. After that, another loop is
created. This loop will be used for when the user wishes to "exit" the loop –simply entering the
word "exit" can motion the loop into action. When the operator has exited the loop, information may
be entered into the system. A command is then given to open a certain file and insert a new string (a
line which will be added to the records document.) Once the new information has been entered, the
stream to the file is closed so as to avoid errors to/from the file later on and also saves all alterations
that

The Pros And Cons Of Blast4traffic Review
What is Blast4Traffic? Does Blast4Traffic work? Is Blast4traffic legit? You will get the answer to
this most common questions that people put out for programs like this. Blast4Traffic reviews admits
that this program is still a form of traffic exchange program. What is Blast4Traffic? According to
Blast4Traffic reviews, almost half of the people in the email lists are there because they get credits
in exchange for receiving these emails. This looks like a fair trade in. The Blast4Traffic subscriber is
allowed to send these emails, which are received willingly, and the recipient gets their free credits
by simply reading the emails and the link to get these credits. Clearly, this is a nice setup for both
parties involved.
You will be provided with easy to follow detailed instructions on how to send your ads. Subscribing
to this system will take you to the easy to follow Video tutorial. The software is not a trial version
but is a complete version so that you can enjoy the benefits that goes with it. Other bonuses are
included in the offer like the HTML editor/creator program and HTML tutorial. Along with these,
you will also get 3D Heading Creator Program. This comes with the free anti–spyware software
program. There is also some other programs that are offered like the free source/link encryption
program. Given time, no ... Show more content on Helpwriting.net ...
Blast4Traffic review shares that to make your Blast4Traffic campaign successful you have to create
a high quality–landing page. This is not all, you also have to be creative enough to come up with a
very attractive offer that no one can refuse and of course seal the deal by writing a strong call to
action. If you combined all of these techniques, you are guaranteed of success with your Blast 4
Traffic campaign. All of these for just one lifetime membership fee of only $34.50, which is less
than $50! This comes with 100% money back guarantee. With these great offers which you only
need to pay for such a very low one–time

programiing Essay
Programming Exercises
1: Write a program that creates an array with 26 elements and stores the 26 lowercase letters in it.
Also have it show the array contents.
2: Use nested loops to produce the following pattern:
$ $$ $$$ $$$$ $$$$$
3: Use nested loops to produce the following pattern:
F FE FED FEDC FEDCB FEDCBA
Note: If your system doesn't use ASCII or some other code that encodes letters in numeric order,
you can use the following to initialize a character array to the letters of the alphabet: char lets[26] =
"ABCDEFGHIJKLMNOPQRSTUVWXYZ";
Then you can use the array index to select individual letters; for example, lets[0] is 'A', and so on.
4: Have a program request the user to enter an uppercase letter. Use ... Show more content on
Helpwriting.net ...
The program should then continue to prompt for limits and display answers until the user enters an
upper limit that is equal to or less than the lower limit. A sample run should look something like
this:
Enter lower and upper integer limits: 5 9 The sums of the squares from 25 to 81 is 255 Enter next
set of limits: 3 25 The sums of the squares from 9 to 625 is 5520 Enter next set of limits: 5 5 Done
10: Write a program that reads eight integers into an array and then prints them in reverse order.
11: Consider these two infinite series:
1.0 + 1.0/2.0 + 1.0/3.0 + 1.0/4.0 + ... 1.0 – 1.0/2.0 + 1.0/3.0 – 1.0/4.0 + ...
Write a program that evaluates running totals of these two series up to some limit of number of
terms. Have the user enter the limit interactively. Look at the running totals after 20 terms, 100
terms, 500 terms. Does either series appear to be converging to some value? Hint: –1 times itself an
odd number of times is –1, and –1 times itself an even number of times is 1.
12: Write a program that creates an eight–element array of ints and sets the elements to the first
eight powers of 2 and then prints the values. Use a for loop to set the values, and, for variety, use a
do while loop to display the values.
13: Write a program that creates two eight–element arrays of doubles and uses a loop to let the user
enter values for the eight elements of the

ERP Internal Controls and ERP Systems Flow Chart
Create Sales Order Match with Inventory Send Copy of Sales Order With Goods to Shipping Verify
Sales Order in ERP System Check invoice for inconsistencies in invoice content Call Sales for any
inconsistencies or sales orders with no matching numbers in system If problems not resolved, send
back to Sales for correction If everything showing is correct, make three copies of invoice Send one
copy of Invoice to Billing, one with goods to customer, and one directly to customer ERP Internal
Controls ERP Systems Flow Chart Report There is a system of checks and balances in the respect
that the sales order is verified upon receipt in the shipping department against the input information
in the ERP system. If no match is found for the sales order, it is sent back to the Sales Department
for correction. If the match is found, it is then verified for consistency of input into the system
against the paper copy. If inconsistencies are present, the Sales Department is called. If the problem
cannot be resolved, it is sent back to the Sales Department for correction. The matching restraints
help to determine the validity and accuracy of the sales orders. The confirming of the sales order
numbers for validity and contents for consistency and accuracy are strong prevention measures. A
combination of individual department checks compiled with an ERP, which links all computers to
the same reporting system, can show anomalies that may be indications of a problem (Duff, n.d.).
By

Questions On Learning Objectives And Outcomes
LESSON 3: LOOPING
LEARNING OBJECTIVES AND OUTCOMES
Introduction
Additional Features of FOR Loop
Nesting of For loops
Jumps in loops Jumping out of a loop
Skipping a part of a loop
Labeled Loops
Classes
INTRODUCTION
Computers are quite efficient in performing task repeatedly. It can efficiently perform same
operation 10,000 times without exhausting. Looping is the process of executing a block of
statements repeatedly. It ranges from zero to infinite with full efficiency. When looping continues
forever, it is known as infinite looping. Hence, to avoid infinite looping some termination conditions
are required. JAVA supports this feature. It has control statements which allow looping only after
checking test conditions. If test conditions are satisfied, statement block will execute otherwise it
will not.
Looping process in JAVA includes certain steps which are follows:
1. Setting and initializing counter.
2. Execution of statement block.
3. Testing of test conditions before execution of loop.
ADDITIONAL FEATURES OF FOR LOOP
There are several capabilities of for loop which other looping constructs lag behind. Some of these
features are explained below with the help of examples:
Initialization Section: a=1; for (i=1; i0; z=z/2)
JAVA also allows us to use expressions in assignment statements.
Omitting Sections:
............
............ a=2; for ( ; a!=15 ; )
{
System.out.println (a); A=a+2;
}
..............
..............
It is one of the unique features of JAVA that it can omit one or

Network Theory Information Flow Based Theory And Control...
Cyber–physical systems:–
Abstract: – Security is one of the important aspect in deciding the reliability of any system and
Cyber – Physical systems cannot be ruled out from this important issue. In this paper we investigate
the security issues in CPS, enforcing sensor network theory information flow based theory and
control theory in CPS which are the three primary approaches to system security policies and
mechanisms. In brief we will categorize attacks based on these three primary approaches and also
discuss some of the mitigations to inflate the growth of CPS in terms of security.
What is a Cyber Physical system:–
CPS is a well–integrated computational and physical process, which sense the physical world
interact with the physical world and control the entities pertaining to the physical world. It is the
amalgamation of communication computation and control. CPS perform their activities in such a
way that their behavior is constrained by the laws of physics.
According to David A Mindell, "The era of cyberspace and the internet, with its emphasis on
computer as a communication device and as a vehicle for human interactions connect to a longer
history of control systems that generated computers as networked communication device."
The commerce, entertainment and friendship these three different subjects from history has taught
us three basic lessons
1. Cyber system should be a part of systems design.
2. Cyber System is a support service that should not hinder usability

Location Of Statcom For Power Flow Control
Location of STATCOM for Power Flow Control Dr..Neelakantappa, Narasapur, Hyderabad.,India
Dr.AmjanShaik Narasapur, Hyderabad.,India ABSTRACT: Power flow control in a long
transmission line plays a vital role in electrical power system. This paper uses the shunt connected
STATCOM for the control of voltage and power flow. The proposed device is used in different
locations such as sending end, middle and receiving end of the transmission line. The PWM control
is used to generate the firing pulses of the controller circuit. Simulation modeling of the system is
carried out using MATLAB/SIMULINK. Based on a voltage–source converter, the STATCOM
regulates system voltage by absorbing or generating reactive power. This paper deals with a
cascaded multilevel converter model, which is a 48–pulse (three levels) GTO converter. The
simulation studies are carried for sending end, middle and receiving end of the transmission line.
The objective is to define the reactive power generated and voltage control at different locations (at
sending end, middle, receiving end) of transmission line using STATCOM. KEYWORDS: FACTS
device, STATCOM, SVC, PWM, MATLAB /Simulink. I. INTRODUCTION: The power system is
an interconnection of generating units to load centres through high voltage electric transmission
lines and in general is mechanically controlled. It can be divided into three subsystems: generation,
transmission and distribution subsystems. In order to provide cheaper electricity the

The University Of Wisconsin : Oshkosh Titans And The St....
Competition is a unique situation in life to analyze. If you can focus on the small details outside of
the game, there's a possibility that you can understand the way an athlete is performing and why a
coach is behaving a certain way. In the heat of the moment, if not properly trained, one can not
perform to their potential due to the pressure that the moment of competition can place on an
individual. This can be just as much for coaches and how they react and act as much as it goes for
player. Effective coaches know how to use the situation to their advantage and know what to do or
how to react at the appropriate time. In this paper, I'll examine the competition of the University of
Wisconsin – Oshkosh Titans and the St. Thomas Tommies in a NCAA Division 3 playoff game. I'm
watching this game from the UW–Oshkosh side, so I will be observing the UW–Oshkosh football
team for the most part. With this competition between UW–Oshkosh and St. Thomas, I'll break
down this paper into four talking points and the effects of said points. These four points are pre–
competition routine, feedback and reinforcement by coach, game flow and interruptions and then
other thoughts and factors that I noticed during the game. First off, let's discuss the pre–competition
routine for this highly anticipated playoff game. UW–Oshkosh warms up with very little mistakes
and appear to be comfortable with their warm–up routine. There is a lot of energy on the Oshkosh
sideline, with smiles and head nods

Labview Based System For Mpc Tuning And Implementation For...
LabVIEW based system for MPC tuning and implementation for a flow control loop Chetan D.
Jichkar Department of Instrumentation Vishwakarma Institute of Technology Pune, Maharashtra,
India 411037 chetanjichkar.jci@gmail.comShilpa Y. Sondkar Department of Instrumentation
Vishwakarma Institute of Technology Pune, Maharashtra, India 411037
shilpa.sondkar@vit.eduAbstract– Accurate as well as precise flow measurement and control are the
mandatory requirement for any process industry. To achieve critical set point process controllers
need to be fine–tuned and fast responsive. Traditional PID Controllers can be used to meet these
requirements but those too have limitations and PID's are confined to their offset limits. In case of
petroleum industry keeping positive or negative offset during flow control may lead to big financial
loss to company or customers due to incorrect measurement by controller. Today's need of precise
control to avoid financial losses should be addressed very carefully and reliable solutions should be
provided to the industries. This paper put a light on a new control technique for the process control
of integrated flow control loop using the Model Predictive Control (MPC) technique. The response
of MPC was accurate and nearer to the ideal response as compared to Proportional Integral
Derivative (PID) Index Terms– PID, MPC, MATLAB, LabVIEW. Introduction Model Predictive
Control (MPC) provides best accuracy and precision in flow measurement and control with

Evaluate how managing resources and controlling budget...
Evaluate how managing resources and controlling budget costs can improve the performance of a
business. (D1)
Managing resources of a business can be hard for the business they have to maintain the resources
by doing various checks over the years. For example maintaining a physical resource like a
building, can be challenging, but in order to maintain it, a business has to insurance the building and
the contents need to be in place, if the building needs repairs then they need to be repaired in time,
the building needs to have security systems in place such as, entry codes, cctv, gated areas and areas
maintained regularly; the person in charge to manage this resource can be the site manager, it's his
responsibility, to keep everything ... Show more content on Helpwriting.net ...
When running a business there is fixed costs that are always the same, these include costs such as
rent, insurance and road tax. Knowing the changes of your 'fixed' costs could save a lot of time and
keep a more clearly financial statement and management decisions. For example the government
orders all insurance on cars to increase by 15%, this used to be a fixed cost however on the odd
occasion it can change. Applying close attention to changes within 'fixed' costs can be crucial and
will improve the performance of management decisions in the future as you have valid data to hand.
The pricing in times like the recession for rent could always be changing and product prices can go
up or down according to competitors within the marketing environment, using invalid information
for predictions on what will happen with the business is suicidal and managing resources and
budgets can cover this problem and in turn improve the company's performance by making accurate
marketing decisions that will benefit the company.
Also, in any recession businesses need to insure their safety by keeping reserves from the cash flow
cycle for emergencies. An emergency could render anything from a downturn in the market to an
offensive attack on your business premises, keeping reservations will help soften the effects of these
situations. Business analysts recommend that

Programming
Programming Programming Logic and Design, 6th Edition Chapter 3 Exercises 1. In Figure 3–10
the process of buying and planting flowers in the spring was shown using the same structures as the
generic example in Figure 3–9. Describe some other process with which you are familiar using
exactly the same logic. Answer: Student answers will vary widely. They should come up with
processes that fit the generic logic shown in Figure 3–9. Some examples could include: making a
dentist appointment or registering for a class. Pseudocode for each follows. if it's time for your
annual teeth cleaning call the dentist for an appointment tomorrow while the day and time you want
isn't available if another time the same day is ... Show more content on Helpwriting.net ...
a two–inch by one–inch rectangle Pseudocode: start lower the pen to a piece of paper move one inch
along a straight line move one inch along a straight line turn 90 degrees to the right move one inch
along a straight line turn 90 degrees to the right move one inch along a straight line move one inch
along a straight line turn 90 degrees to the right move one inch along a straight line raise the pen
from the paper stop or start do A do C do C do D do C do D do C do C do D do C do B stop
Flowchart: [pic] c. a string of three beads Pseudocode: start lower the pen to a piece of paper draw a
circle that is one–inch in

Analysis And Design Of Software
Structured Programming, Nassi–Shneiderman Structure Charts, Formal Proofs of Correctness, and
Structured Analysis and Design are all tools to help with analysis and design of software. Each topic
is described briefly below with respect to software development and project management. At its
core, Structured Programming is a method to organize code. The intent of the rules laid out by the
method is to make code easier to read, understand, and maintain (3). Most software projects are
large and written by many programmers. Employing Structured Programming provides strict
guidelines on coding practices. These guidelines are designed to decrease development time,
improve readability, and increase maintainability. There are three components of structured
programming: Control Structures, Subroutines, and Blocks (13). Control Structures are further
broken down into Sequences, Selections, and Iterations. Sequences are lines of code that are
executed in a specific order. Selections are only executed when the program is in a certain state, and
Iterations are loops that are executed until a certain condition is met. Both Subroutines and Blocks
are units of code that are executed together. Blocks have specific syntax in order to group the lines
of code together and are only present in some languages. They are a way to group executable code
in order to make sense to the reader and clearly define sections and functionality of the code. The
grouping is motivated by the flow of information

Which Of The Following Equation Is True?
Java Software Solutions: Foundations of Program Design, 6e (Lewis/Loftus)
Chapter 5 Conditionals and Loops
Multiple–Choice Questions
1) The idea that program instructions execute in order (linearly) unless otherwise specified through
a conditional statement is known as
A) boolean execution
B) conditional statements
C) try and catch
D) sequentiality
E) flow of control
Answer: E
Explanation: E) The "flow of control" describes the order of execution of instructions. It defaults to
being linear (or sequential) but is altered by using control statements like conditionals and loops.
2) Of the following if statements, which one correctly executes three instructions if the condition is
true?
A) if (x < 0) a = b * ... Show more content on Helpwriting.net ...
So the logic is improper. If the student's grade falls into the 'A' category, then all 4 conditions are
true and the student winds up with a 'D'. If the student's grade falls into the 'B' category, then the
first condition is false, but the next three are true and the student winds up with a 'D'. If the student's
grade falls into the 'D' category, then the only condition that is true is the one that tests for 'D' and so
the grade is assigned correctly. If the student's grade falls into the 'F' category, then none of the
conditions are true and an 'F' is assigned correctly. So, only if the grade < 70 does the code work
correctly.
8) You might choose to use a switch statement instead of nested if–else statements if
A) the variable being tested might equal one of several hundred int values
B) the variable being tested might equal one of only a few int values
C) there are two or more int variables being tested, each of which could be one of several hundred
values
D)

Control Engagement Flow Diagram Of The Project Management...

Recommended

Recommended

More Related Content

Similar to Control Engagement Flow Diagram Of The Project Management...

Similar to Control Engagement Flow Diagram Of The Project Management... (8)

More from Lana Stefanich

More from Lana Stefanich (10)

Recently uploaded

Recently uploaded (20)

Control Engagement Flow Diagram Of The Project Management...