1. CURRICULAM VITAE
KUMERESAN.K
Mobile : +91-9952525975
Email : kumaraesank@yahoo.co.in
OBJECTIVE:
Result oriented Electronics & Instrumentation Engineer with 7+ years experience in Design & Detailed
Engineering of Power plant ,Water Treatment Plants,DM & Pulp & Paper plants Instrumentation and Control.
Multidisciplinary versatility with excellent communication skills, time management, analytical skills to anticipate
and assess project issues & problems.
PROFESSIONAL EXPERIENCES:
Present Employer :-
Designation : Project Engineer (Automation & Control)
Company : SPB Project and Consultancy Limited, Chennai
Project Handled #1 : Tamilnadu Newsprint & Papers Limited-TNPL UNIT#2
Mondipatti Trichy District.
Basic Engineering and detail engineering for 2x90 TPH AFBC multi-
fuel Power Boiler, 1 x 30 MW TG,2 x 50 m3/hr WTP plant,
Previous Project#2 : BILT Graphic Paper Products Limited, Balharshah, Maharashtra.
Detail Engineering for Revamping of pulp mill from Finland-900 tpd,
Recovery high pressure Boiler,Eveporator,LimeKiln & recastizing plant.
& Wetlap machine from USA, 100MLD WTP plant,
Duration : From Jan’12 to Till Now.
Pervious Employer :-
Designation : Asst- Engineer (Instrumentation)
Company : Esquare Consultants,
Project Handled : Vish tech, Melvisharam,Common Effluent Treatment Plant-2X300MLD
Customer : TamilNadu Water Investment Company-Chennai
Nature of the job : Control & Instrumentation – Basic & detail Engineering
Duration : From Dec’10 to Dec ’11.
2. First Employer:-
Designation : Site Engineer (Instrumentation)
Company : Sakthi Deepak Instrumentation Controls, Cuddalore.
Project Handled : 1. 1 x18MW & 1x40 m3/hr WTP plant Auro Mira Bio Power Plant,
ShanmugaPuram, Tirunelveli Dist T.N
2. 2x150 MW captive Power Plant & 2x80 m3/hr WTP plant
MEPL Power, Gudur Andhra pradesh.
Project : EPC (Basic & Detail Engnieering & Supply, Erection / Commissioning)
Duration : From Aug’09 to Nov’10.
SKILLS & EXPERTISE:
Good working experience in various phases of Projects like Basic Engineering, Front End Engineering
Design (FEED), and Detailed Engineering including Project Co-ordination.
Involved in the Procurement activities like RFQ preparation for instruments, Preparing TQ and
Making technical comparison and TBE and preparing MR for purchace.
Review and annotate P&I Diagrams .
Preparation of Master Instrument list by using PID and I/O list for DCS.
Preparation of Compression Documents based on offer
Selection of instruments based on process applications.
Flow meter and Control valve sizing Calculations .
Preparation of Loop Diagrams.
Preparation of process interlocking diagrams for DCS Engineering.
Reviewing of Hardwired interlocking diagrams for safety operation of plants
Preparation of control loop scheme for DCS Engineering.
Preparation of loop functional description .
Preparation of Instrument Data sheet.
Insert Plate & cut-off Drawings for Cable Tray and Control Panel.
Air manifold and distribution drawings.
Involved in complete JB detail engineering like JB Grouping and Locating.
Preparation of Junction box schedule
Preparation of cable schedule.
Preparation of cable tray routing drawings.
Reviewing PDS Drawings for Cable Tray Routing & Instrument installation.
3. EXPOSURE IN AUTOMATION:
On going project :
Exposure in SIMATIC PCS7, Siemens DCS VOITH CONTROL SYSTEM which are using in TNPL unit
#2 Project.
Total I/o’s handling in this project – 8000.
Special feature - All servers, controllers, power supply & communication is redundant this system
is total redundancy system .
Pervious Project :
Exposure in Metso Automation Metso DNA controller is used in BGPPL Pulp Mill Project.
Total I/O’s handled in this project - 5000 (Fiberline area only),
and 4 Nos. of ACN CS type controller used in this project.
Exposure in Honeywell ML 200 controller used in BGPPL Wetlap Project.
Total I/O’s handled in this project – 500.
Exposure in reviewing of Automation engineering documents like,
• PLC, DCS GA drawings,
• Marshaling wiring details
• SCADA Graphic drawings etc.,
Attending Software Fat at DCS Supplier’s place.
MAJOR TOOLS PRACTICED:
Knowledge of Sizing software :
FSM (Fisher Specification Manager) for Control valves .
Instrument tool kit for Emerson Instrument’s.
Instrucal tool DemoVersion 8.0.1- basic level for general sizing.
Knowledge of General software:
MS office(word, excel),Open office.
Bricscad and AutoCAD.
DIPLOMA EXPERIENCE DETAILS:
Designation : J.Engineer (Instrumentation)
Company : Multi tech Engineers, Chennai.
Project Handled : Common Effluent Treatment Plant-3X500 MLD,
For Windsor Sathyam Engineering Company - Chennai
Project : EPC (Basic & Detail Engnieering & Supply, Erection / Commissioning)
Duration : Jun’04 to July’06
4. ACADEMIC PROFILE :
• B.E Electronics and Instrumentation from Thangavelu Engineering College, Anna University,
Chennai, scoring 65% in May' 2009
• Diploma in Electronics and Communication Engineering from Elumalai Polytechnic College,
Villupuram, scoring 72% in October 2004
• S.S.L.C in Balavihar Matric.Hr.Sec.School, Panruti in March 2001.
PERSONAL DETAILS:
Date of Birth : 13-06-1986.
Father’s Name : Mr.D.Karunakaran
Passport number : H9322107 (Valid Till 2020)
Nationality : Indian.
Marital Status : Single.
Permanent Address : 15/6B, Sadayapillai Street,
Panruti – 607106
Cuddalore (Dt)
Language Known : English,Hindi,Tamil .
DECLARATION:
I hereby declare that all the above details are true to my knowledge and belief.
Date:
Place: Yours Truly,
(Kumeresan.K)
