Which IT Security Metrics focuses on effectiveness-Solution Use quant.docx

•Download as DOCX, PDF•

0 likes•2 views

Which IT Security Metrics focuses on effectiveness? Solution Use quantitatively or qualitatively measurable, security metrics of some sort are necessary to help technical staff and management better understand the companyâ€™s risk exposure, effectiveness of mitigation efforts and progress, in relation to constant improvements and investment into the IT security budget. Executive Dashboard which would both help inform senior management of the companyâ€™s security posture, as well as track the security programmeâ€™s effectiveness over time. use of the same framework will only simplify understanding of the key issues to senior management and help map metric-identified shortcoming against the security controls implementation plan and budget. This close relationship should provide clear links between risk areas and investment, with the aim of providing maximum security effectiveness. necessary to help technical staff and management better understand the companyâ€™s risk exposure, effectiveness of mitigation efforts and progress, in relation to constant improvements and investment into the IT security budget. .

Education

Similar to Which IT Security Metrics focuses on effectiveness-Solution Use quant.docx

Insight into Security Leader Success Part 2

Security Executive Council

u10a1-Risk Assessment Report-Beji Jacob

Beji Jacob

The security risk management guide

Sergey Erohin

The security risk management guide

Sergey Erohin

From Enron and WorldCom to the more recent financial crisis, events of the last decade have fundamentally shifted how organizations think about risk. Companies around the world have made substantial investments in personnel, processes and technology to help mitigate and control business risk. Historically, these risk investments have focused primarily on financial controls and regulatory compliance. However, these investments have often not addressed more strategic business risk areas. As a result, senior executives may not perceive risk management as strategic to the enterprise. Senior executives also may not have sufficient confidence in their ability to identify and address the risks that could impact the financial performance − or even the viability — of their organization. A strategic question presents itself: “Do organizations with more mature risk management practices outperform their peers financially?” Our research and experience tend to suggest “yes!” In this presentation, Isnaeni Achdiat will also discuss how leading organization with higher maturity in managing risks, gets better return. We will also present the new paradigm of dealing with risks, either it is good or bad risks. We will introduce the concept of "risk that matters" in an organization and discuss approach to mitigate. Furthermore, we will present the linkage between strategic and project risks and how a good risk culture can impact the success of organization managing their risks. By analyzing the relationship between the strategic and project risks, the project professionals can better understand the setting priorities the boards make, and thus can anticipate allocation of resources at the optimum level, for the benefit of the enterprise. Managing project risks, without understanding context and background of the initial strategic decision, will not allow the project professionals to understand why top management put on-hold the project, or keep it running at the right speed.

SymEx 2015 - Turning Risks Into Results, A Wider Perspective to Understand P...

PMI Indonesia Chapter

Continuous Controls Monitoring (CCM) is defined as applying technology to allow continuous (or at least high-frequency), automated monitoring of controls to validate the effectiveness of controls designed to mitigate risk, including maintaining an active cyber defense posture and ensuring business continuity and regulatory compliance. CCM has many use cases across industries. It exists in Financial Services as fraud monitoring and financial transaction monitoring. It’s utilized in Manufacturing for quality and process control monitoring. Across industries, organizations are starting to deploy CCM over key control processes around network and data security. There are a couple of different approaches to CCM implementation. It can be as simple as turning on certain settings in the source operating system and using its built-in dashboards and reports.

Presentation1.pptx

JunaidAhmed976315

It and business risk alignment guide

AstalapulosListestos

EA as a Change Management Agent

Jerald Burget

ISO 27001 ISMS MEASUREMENT

Gaffri Johnson

Gtag 1 information risk and control

Yulias Sihombing, Ak, MAk, CIA

Deloitte_Risk Sensing

Frederic Girardeau-Montaut

CYBER SECURITY audit course report

PDEA's college of engineering, Pune

Assuring Digital Strategic Initiatives by

FirstMutualHoldings

AP_Cybersecurity_and_Risk_Management_Lead_from_the_C-suite_Mar_2016

Ben Browning

3/28/2020 Originality Report https://ucumberlands.blackboard.com/webapps/mdb-sa-BB5a31b16bb2c48/originalityReport/ultra?attemptId=05942a1c-6d92-4c7e-b1b8-6edc521465… 1/3 %19 %4 %2 SafeAssign Originality Report Spring 2020 - InfoTech Import in Strat Plan (ITS-831-52) (ITS-831-53) -… • Week-12 %26Total Score: Medium risk BHANUKRISHNA MOKKA Submission UUID: 056c37c5-1709-f218-2f2f-9b6002991145 Total Number of Reports 1 Highest Match 26 % COSO_Framework_Research_Paper_Bhan… Average Match 26 % Submitted on 03/28/20 06:22 PM EDT Average Word Count 1,178 Highest: COSO_Framework_Research_Pa… %26Attachment 1 Institutional database (4) Student paper Student paper Student paper Student paper Internet (4) wikipedia coso corporatecomplianceinsights protiviti Scholarly journals & publications (2) ProQuest document ProQuest document Top sources (3) Excluded sources (0) View Originality Report - Old Design Word Count: 1,178 COSO_Framework_Research_Paper_BhanuKrishna_Mokka.docx 8 1 9 2 6 4 3 5 7 10 8 Student paper 1 Student paper 6 wikipedia Running head: COSO FRAMEWORK COMPONENTS 1 COSO FRAMEWORK COMPONENTS 8 COSO Framework Components BhanuKrishna Mokka ITS-831 - Infotech Importance in Strategic Planning University of the Cumberlands Dr. Eric Hollis March 28, 2020 Abstract The utilization of the COSO framework in an internal audit of firms is imperative in the identification of accomplished objectives. Additionally, the framework provides analyses of risks in the external and internal environment, which can impact business operations. Risks identification has an impact on the financial performance of the business. Control activities ensure procedures and policies are followed, whereas a control environment enables integrity and ethics in the managerial activities of the employees. This ensures operations, procedures, and organizational activities are done as per the set standards for compliance and accountability. Information and communication effectiveness ensure message conveyance and feedback. Monitoring and review activities provide feedback for improvement activities in the 1 2 3 https://ucumberlands.blackboard.com/webapps/mdb-sa-BB5a31b16bb2c48/originalityReport?attemptId=05942a1c-6d92-4c7e-b1b8-6edc521465b3&course_id=_114545_1&download=true&includeDeleted=true&print=true&force=true 3/28/2020 Originality Report https://ucumberlands.blackboard.com/webapps/mdb-sa-BB5a31b16bb2c48/originalityReport/ultra?attemptId=05942a1c-6d92-4c7e-b1b8-6edc521465… 2/3 Source Matches (15) evaluation of internal control system effectiveness. Achievement of objectives and optimal operations assist the business to operate smoothly within accountability, compliance, and reliability elements in internal control. The elements are imperative in financial auditing practices in financial reporting. The integrated internal control framework provides security in the achievement of objectives. Introduction The Committee o ...

3282020 Originality Reporthttpsucumberlands.blackboar.docx

lorainedeserre

Risk_Technology

Tom Patterson CPA CISA

GP for Risk Management product sheet

Marco Villacorta Olano

RAP GC 2016

Terri Marconi McKnight

Book 2_Bab 11_Information Technology and ERM.pdf

noygemma2

Qatar Proposal

Absar Husain

Similar to Which IT Security Metrics focuses on effectiveness-Solution Use quant.docx (20)

Insight into Security Leader Success Part 2

u10a1-Risk Assessment Report-Beji Jacob

The security risk management guide

SymEx 2015 - Turning Risks Into Results, A Wider Perspective to Understand P...

Presentation1.pptx

It and business risk alignment guide

EA as a Change Management Agent

ISO 27001 ISMS MEASUREMENT

Gtag 1 information risk and control

Deloitte_Risk Sensing

CYBER SECURITY audit course report

Assuring Digital Strategic Initiatives by

AP_Cybersecurity_and_Risk_Management_Lead_from_the_C-suite_Mar_2016

3282020 Originality Reporthttpsucumberlands.blackboar.docx

Risk_Technology

GP for Risk Management product sheet

RAP GC 2016

Book 2_Bab 11_Information Technology and ERM.pdf

Qatar Proposal

More from jbarbara1

1. Define computer crime and list several examples of computer crime. 2. Explain the purpose of the Computer Fraud and Abuse Act of 1986 and the Electronic Communications Privacy Act of 1986. 3. Contrast hackers versus crackers. 4. Why are insider threats particularly dangerous for organizations? 5. Define malware and give several examples. 6. What are physical access restrictions, and how do they make an information system more secure? 7. Describe three human-based controls for safeguarding information systems. 8. Describe how the Sarbanesâ€“Oxley Act impacts the IS security of an organization. Solution The various examples of computer crime are: A cracker is one who breaks into or otherwise violates the system integrity of remote machines with malicious intent. Having gained unauthorized access, crackers destroy vital data, deny legitimate users service, or cause problems for their targets. Crackers can easily be identified because their actions are malicious. There are two major types of crackers. The first group has expert crackers who discover new security holes and often write programs that exploit them. The second type, the script kiddie , only knows how to get these programs and run them. Script kiddies are more numerous, but much easier to stop and detect. Besides the ethical difference between the two, the major factor that separates hackers from the vast majority of crackers is an understanding of computer systems and the ability to create software. A real hacker can write code in one or more languages (C, C++, assembly, Java) and understands what that code does and why it works (or doesnâ€™t). The majority of crackers have little programming ability, or none at all, and usually donâ€™t understand how the tools they use work. If a machine gets hacked by a script kiddy, its usually because the administrator didnâ€™t maintain the machine and apply patches for known vulnerabilities. While SOX addressed primarily the accounting side of organizations, it did greatly increase the demand for IS auditors. Regulations put in place by SOX require companies to have controls in place to prevent misuse of fraid, controls to detect potential problems, and effective measures to correct any problems found. Information systems are key in today\'s business environments to handle the mass flow of data transmitted on a daily basis. These systems, however, need to be regularly checked to ensure that they are performing their roles effectively. SOX also placed upon businesses a requirement to preserve evidence to document compliance and for potential lawsuits. Since many of these documents have important information, safeguards need to be put in place to prevent private information from being leaked or accessed. Once again, the fact that seemingly everything is digital means that the safeguards are mostly or all technological in nature, again emphasizing IS security. .

1- Define computer crime and list several examples of computer crime-.docx

jbarbara1

1. Create a Visual Calculator by using winform application in Microsoft Visual Studio .The application built is designed and work simular to the Windows calculator. 2.The code needs to be done in C++ Programming Solution #include<conio.h> //For_getch()_function #include<math.h> int flag=0; double ans, a, b; using namespace std; namespace Calculator { using namespace System; using namespace System::ComponentModel; using namespace System::Collections; using namespace System::Windows::Forms; using namespace System::Data; using namespace System::Drawing int num[7] = { 0 }; // seed srand((int) time(0)); // Randomize the array values. for (int i = 0; i < 7; i++) num[i] = (rand() % 99) + 1; // set the label text with random number this->label1->Text = Convert::ToString(num[0]); this->label2->Text = Convert::ToString(num[1]); this->label3->Text = Convert::ToString(num[2]); this->label4->Text = Convert::ToString(num[3]); this->label5->Text = Convert::ToString(num[4]); this->label6->Text = Convert::ToString(num[5]); this->label7->Text = Convert::ToString(num[6]); // change the button states. this->button1->Enabled = false; this->button2->Enabled = true; } // Calculator.cpp : main project file. #include \"stdafx.h\" #include \"Form1.h\" using namespace Calculator; [STAThreadAttribute] int main(array<System::String ^> ^args) { // Enabling Windows XP visual effects before any controls are created Application::EnableVisualStyles(); Application::SetCompatibleTextRenderingDefault(false); // Create the main window and run it Application::Run(gcnew Form1()); return 0; } .

1- Create a Visual Calculator by using winform application in Microsof.docx

jbarbara1

1. Consulting a periodic table: Which of the six cations studied are found in Group 1 (the alkali metals)? Which are found in Group 2 (the alkaline metals)? 2. Refer to your observations of how the Group 1 and Group 2 metal ions behaved in terms of forming precipitates and circle the correct responses. The Group 1 metal ions did did not tend to form precipitates easily. The Group 2 metal ions did did not tend to form precipitates easily The elements in Group 17 (listed as Group VII A on some periodic tables) are the halogens. 3. The anions in solution for today\'s experiment were derived from these elements and are called halides The halogens exist as diatomic species (Cl, Br2, 12) when they are not part of a compound or if they are not charged There really is a huge difference between a halogen and a halide. The halogens tend to be fairly reactive and do serious damage to living tissue while the halides are generally harmless: Cl2 (chlorine) is a halogen used to kill bacteria in swimming pools. Pure chlorine is a toxic yel low gas that can cause serious lung damage and death if inhaled. Cl (chloride ion) is a halide found in table salt. You shake it on your food and consume it every day. Which species do you suppose is commonly found in toothpaste, Which is fluoride? orF Which is fluorine? 4. The negative ions studied in today\'s experiment were all monatomic. When aluminum chloride, AICI3, dissolves in solution it produces an aluminum ion, A13+, and three individual chloride ions, Cl Alcl dissolved in water ? Ap- CI- CI- CI- There are also many polyatomic ions. These are species made up of two or more atoms bonded together: Carbonate ion Co2 Nitrate ion NO, Nitrate ion NCO Solution 1) Alkali metal cation :- Li + (Lithium) , Na + (sodium),K + (potassium),Rb + (Rubidium),Cs + (Caesium), Fr + (Francium) Alkaline earth metals :- Be 2+ (Beryllium) ,Mg 2+ (Magnesium) , Ca 2+ (Calcium) , Sr 2+ (Strontium) , Ba 2+ (Barium) , Ra 2+ (Radium ) 2) The group 1 metals did not tend to form precipitates easily The group 2 metals did tend to form precipitates easily. 3) F - is present in toothpaste . Commonly SnF 2 is present in toothpaste. Fluoride is F - ; Fluorine is F 2 .

1- Consulting a periodic table- Which of the six cations studied are f.docx

jbarbara1

1. Briefly state the difference between single stage and multistage distillation. (i.e. you can solve this question with an aid of the schematic diagram) 2. Briefly describe the equilibrium or flash distillation, simple batch or differential distillation, and simple steam distillation. Solution 1.SINGLE STAGE DISTILLATION :A single-stage continuous operation where a liquid mixture is partially vaporized: the vapour produced and the residual liquid are in equilibrium, which are then separated and removed. The feed is preheated before entering the separator. As such, part of the feed may be vaporized. The heated mixture then flows through a pressure-reducing valve to the separator. In the separator, separation between the vapour and liquid takes place. Multistage distillation : Method used for sea water distillation. The heated seawater flows to the first stage, where it flashes upon entry. During flashing, some of the water vapour (steam) is removed from seawater. The flashed vapour is then condensed on the outside of the tubes carrying seawater feed to the brine heater.condensed steam is withdrawn as fresh water. The unflashed portion of seawater now contains more salts, and is send to the second stage for further flashing. The second stage is operated at a pressure lower than the first stage in order to lower the boiling point of seawater. At the second stage, more water vapour (steam) is flashed off, and is again recovered as fresh water by condensing on the tubes carry seawater feed to the first stage. The remaining seawater is then send to the third stage, at a lower pressure than the second stage, for more separation. 2.Flash distillation :It is also called single stage equilibrium explained above.. Differential distillation :Batch distillation is an unsteady state operation. It is usually carried out in a batch still to which a column equivalent to a number of equilibrium stages is attached. As in the case of simple distillation, a fixed quantity of liquid is originally charged to the batch still. During distillation, the vapour passes upward through the column. The whole column is an enriching section. The vapour is condensed into liquid at the top of the column. Part of the liquid is returned to the column as reflux, and the remainder withdrawn as distillate. Nothing is added or withdrawn from the still until the run is completed. Simple steam distillation : Steam distillation is a separation process used to purify or isolate temperature sensitive materials, like natural aromatic compounds. Steam or water is added to the distillation apparatus, lowering the boiling points of the compounds. The goal is to heat and separate the components at temperatures below their decomposition point. .

1- Briefly state the difference between single stage and multistage di.docx

jbarbara1

1. A polar section of a molecule, which isÂ Â ---Select--- to water, is called hydrophilic (literally, \"water loving\"), and a(n)___part of the molecule, which is not expected to be attracted to water, is called hydrophobic (\"water fearing\"). 2. Would the following combinations be expected to be soluble or insoluble? (a) hydrocarbon solute and hexane (b) nonpolar solute and nonpolar solvent (c) ionic solute and hexane 3. The solubilities in water of several substances are listed below. Classify each of these substances as soluble, insoluble, or moderately soluble, based on the criteria presented in the text. (a) Camphor, C 10 H 16 O (a topical anti-infective): 0.1 g per 100 mL H 2 O at 25Â°C (b) Cobalt(II) fluoride, CoF 2 (a catalyst in organic reactions): 1.5 g per 100 g H 2 O at 25Â°C 4. The primary components of vinegar are acetic acid and water, both of which are composed of polar molecules with hydrogen bonds that link them. These two liquids will mix in any proportion. Explain why acetic acid and water are miscible. 5. What does it mean to say a solution is saturated? Describe the changes that take place at the particle level in a saturated solution of sodium chloride that contains an excess of solid NaCl. Is the NaCl still dissolving? Solution 1) attracted, non-polar 2) Nonpolar solute dissolves in nonpolar solvent and polar solute dissolves in polar solvent. a)soluble (both being nonpolar) b)soluble c)insoluble (as ionic solutes are polar) 3) solubility: if a solute has a solubility of 0.1g/mL or less, it is considered insoluble. if a solute has a solubility of 1.0g/mL or more, it is considered soluble. Any value between these 2 are considered sparingly soluble. Thus. a) camphor is insoluble in water b)CoF 2 is soluble in water. 4) due to their polar nature and presence of inter molecular H-bonding. 5)The excess NaCl added to saturated solution acts as seeds for NaCl crystal growth, as the solution tries to restore its equilibrium. .

1- A polar section of a molecule- which is---Select--- to water- is ca.docx

jbarbara1

1) Is technology the critical driver of globalization? 2) What is the nature of this arguement conceived by: liberlism, mercantilism, and marxism? Solution Technological developments are considered as the main facilitator and also driving force of most of the globalization processes. Technology is defined as the socialized knowledge of producing goods and services. We could describe the term technology with five important elements: production, knowledge, instruments, possession and change. The definition of technology as a socialized knowledge can be conceived better with these elements. We shall look through them: Technology has something to do with production (of the goods and services). We need technology to produce something either goods (ex: television set, cars etc.) or service (ex: security, teaching etc.) Technology enhances our capacity to produce. Technology has a relationship with knowledge . Technology is an outcome of intellectual activities. Therefore technology is a type of an intellectual property. Nowadays technology is developed through research and development institutions as integral parts of several universities. Technology has a connect with with instruments . Instruments are considered the extensions of the human body, whenever an instrument is used there is technology involved. The instruments show the usage of technology by human beings. Instruments are mostly physical like computers, vacuum cleaners, but sometimes there are immaterial instruments like databases in computer programming. Technology has to do with possession . Those people that possess technology also control it. Controlling technology has something to do with economics and politics. Thus, we speak of technologically rich and poor countries as well as the struggle among them usually in the forms of patents, transfers and protection of intellectual rights. Technology has to do with change . Due to technology, the world has changed drastically. Many of the innovations from the technological advances have important effects on lives of peoples of the world, that has witnessed radical changes more so after 1960 .

1) Is technology the critical driver of globalization- 2) What is the.docx

jbarbara1

1) What creates the US federal government-wide financial statements? 2) Who audits the statements? 3) What is the audit opinion that the statements receive? 4) What do most federal (and non-federal) entities receive? 5) Are there any issues in the government-wide statements? 6) If there are issues, list at least one effort to overcome an issue. Solution Ans-1) IN respect of each & every country there is Administatration department which takes care of the country\'s finance domain. Similarly, for the US government, there is a Bureau called Bureau of Fiscal Services which creates & maintains the financial statements of the US federal government, this statement or financial report contains the country\'s revenues & costs and assets & liabilities (both monetary & non monetary) & this Fiscal Services takes responsibilities of uniformity in the use of accounting standards & reporting requirements ensures the transparent exchange of financial information amongst the government agencies. This, preparation of schedules or summary of monetary & non monetary assets & liabilities, uniform accounting standards & reporting requirements creates the US federal government-wide financial statements. Ans-2) Government Accountability Office, audits the statements. Ans-3) The Government Accountability Office expresses their opinions based on their audit findings, wherein the may provide a opinions without any qualifications (i.e. unqualified audit report) or they may disclaim from any opinions (i.e. Disclaimer Audit Report) or audit opinions with qualification if they have found any material weaknesses or significant inefficiencies or any kind of financial irregularities. Ans-4) The responsibility for preparation & fair presentation of financial statement is the responsibility of management of the federal government however, there are the instances where the federal government is not able to provide the sufficient reliable information or samples for audits to auditors or they have not developed an adequate system of accounting orÂ Â have insufficient appropriate evidence to support certain material information, thereby auditors disclaims from framing any audit opinions with the concrete base for their disclaimer of opinions. Ans-5) Yes there are the issues in the Government wide financial statemens. Ans-6) For example, if there is any material weakness or inability in determining the current or noncurrent assets like properties or inventories or any plant & machinery or a reasonable estimate of the liabilities have not be accounted or there is inadequacy in the amount of assumed liabilities then there has to be robustness in the federal\'s internal control system which will not have any limiting scope for expressing the audit opinions. .

1) What creates the US federal government-wide financial statements- 2.docx

jbarbara1

1) describe how temperature influenced what materials condensed from the nebular cloud. 2) compare and contrast the composition of the inner and outer planets 3) explain the frost line and the influence it has on the formation of planets (in any solar system). 4) explain why our solar system has rocky inner planets and gaseous outer planets and identify the most metal-rich planet in the solar system 5) explain the occurrence of Hot Jupiters Solution Solution: 1) During the early stage of evolution , soon after the completion of the cloud collapse , nebula is hot . The mass accretion rate from the nebula onto the star is high . The equilibrium condensation temperature of the Silicates and metal comprises 90 % (by mass) of the condensable solids.The temperature decreases away from the mid plane and away from the Sun. The accretion of gas onto the sun leads to the dissipation of energy . The nebula is heated internally due to this . Condensation metals include Iron , Nickel and Aluminum . Most metals condense into solids at temperatures of 1000 - 1600 K . Metals made up <0.2% of the Nebular mass. 2) The Inner planets are Mercury , Venus ,Earth and Mars. They are all solid and rocky and similar to Earth . Inner Planets are also called Terrestrial Planets . Inner planets are warmer as these are closer to Sun . Outer planets are called Jovian Planets and are mainly Gaseous in nature . Outer planets are colder as they are farther away from the Sun. All Outer planets have rings . 3) Frost line is also called the Snow line or Ice line . It is the radial position of condensation or evaporation front which varies over time . With reference to the formation of the planets, it is the distance in the Solar Nebula from the central protostar where it is very cold to where the volatile compounds like water , Ammonia , CO2 ,CO condense into solid ice grains. 4) The temperature of the early solar system explains the Terrestrial nature of the inner planets . As the gases coalesced to form the proto Sun the temperature in the inner SOlar system rose . The temperatures rose to about 2000 K , so only substance which have very high melting points remained solid . That is why the inner solar system planets are all rocky . 5) Planetary migration is responsible for the formation of hot Jupiters. These are formed in the outer regions and then migrate to the inner regions of the Solar system . It forms beyond the frost line , from rock , ice and gases due to core accretion method of planetary formation . .

1) describe how temperature influenced what materials condensed from t.docx

jbarbara1

1. People, places, things, ideas and forces are what part of speech? Verbs Nouns Adjectives Adverbs Prepositions 2. Actions or states of being are what part of speech? Verbs Nouns Adjectives Adverbs Prepositions 3. Which part of speech gives more information about nouns? Verbs Nouns Adjectives Adverbs Prepositions 4. Which part of speech gives more information about verbs? Verbs Nouns Adjectives Adverbs Prepositions 5. Which part of speech describes the relationship between the other elements in the sentence? Verbs Nouns Adjectives Adverbs Prepositions 6. Clauses are made up of phrases and there are two types of clauses: Variable and dependent Variable and independent Independent and dependent None of the above 7. If a sentence doesnt have a subject and predicate, it is called: Short sentence Incorrect sentence There is no name for it Fragment 8. What type of sentence merges many details of a common thought into one sentence? Complex sentence Extended sentence Merged sentence Common splice sentence 9. A compound sentence is a type of complex sentence where two independent clauses are joined by a coordinating conjunction. True False 10. A run-on sentence is two or more sentences joined with proper punctuation or connecting conjunctions. true or false Solution 1. People, places, things, ideas and forces are what part of speech? Nouns 2. Actions or states of being are what part of speech? Verbs 3. Which part of speech gives more information about nouns? Adjectives Used to describe knowns. For example: tall guy. Tall is an adjective 4. Which part of speech gives more information about verbs? Adverbs Use do describe verbs. For example: walked slowly. Slowly is an adverb 5. Which part of speech describes the relationship between the other elements in the sentence? Prepositions 6. Clauses are made up of phrases and there are two types of clauses: Independent and dependent The two phrases are always dependent or independent. 7. If a sentence doesnt have a subject and predicate, it is called: There is no name for it Fragment 8. What type of sentence merges many details of a common thought into one sentence? Merged sentence As the question suggest (merged) 9. A compound sentence is a type of complex sentence where two independent clauses are joined by a coordinating conjunction. True 10. A run-on sentence is two or more sentences joined with proper punctuation or connecting conjunctions. false A run on sentence is just the opposite. No proper punctuation or connecting conjunctions .

1- People- places- things- ideas and forces are what part of speech- V.docx

jbarbara1

1. In the context of DNS (a) What are the Resource Records, RR. (b) What are the DNS Resolvers and where are they located? (c) In the context of the RR, what is the time to live, TTL? Solution a) A DNS resource record refers to a zone files that is generally used by the DNS server. In each zone, a collection of structured resource records are held, and these records are typically supported by the DNS Server service The DNS is designed to be extensible to support new services through DNS servers communicate with each other using private network protocols. All DNS servers are organized in a hierarchy. At the top level of the hierarchy, so-called root servers store the complete database of Internet domain names and their corresponding IP addresses. c) The formats used for detached Domain Name System (DNS) information .

1- In the context of DNS (a) What are the Resource Records- RR- (b) Wh.docx

jbarbara1

1. How are budgets used for a company or in government? What would your suggestions be to balance our economic budget? 2. After identifying suggestions for balancing the economic budget explain the importance of being able to identify various \"variances\" that may be identified? You may use any examples you want. Solution 1. How are budgets used for a company or in government? What would your suggestions be to balance our economic budget? Ans. A government budget is a government document presenting the government\'s proposed revenues and spending for a financial year that is often passed by the legislature, approved by the chief executive or president and presented by the Finance Minister to the nation. The budget is also known as the Annual Financial Statement of the country. This document estimates the anticipated government revenues and government expenditures for the ensuing (current) financial year. [1] For example, only certain types of revenue may be imposed and collected. Property tax is frequently the basis for municipal and county revenues, while sales tax and/or income tax are the basis for state revenues, and income tax and corporate tax are the basis for national revenues. The two basic elements of any budget are the revenues and expenses. In the case of the government, revenues are derived primarily from taxes. Government expenses include spending on current goods and services, which economists call government consumption; government investment expenditures such as infrastructure investment or research expenditure; and transfer payments like unemployment or retirement benefits. A status of financial health in which expenditures exceed revenue. The term \"budget deficit\" is most commonly used to refer to government spending rather than business or individual spending. When referring to accrued federal government deficits, the term \"national debt .

1- How are budgets used for a company or in government- What would you.docx

jbarbara1

1. How are temperature and heat different concepts? 2. How does the specific heat of water compare to the specific heat of other common materials? Why is this important? Solution 1. There is a fundamental difference between temperature and heat. Heat is the amount of energy in a system. The SI units for heat are Joules. A Joule is a Newton times a meter. A Newton is a kilogram-meter per second squared. Heat is transferred through radiation, conduction and convection. The amount that molecules are vibrating, rotating or moving is a direct function of the heat content. Energy is transported by conduction as molecules vibrate, rotate and/or collide into each other. Heat is moved along similar to dominos knocking down their neighbors in a chain reaction. An increase of electromagnetic radiation into a system causes the molecules to vibrate, rotate and/or move faster. With convection, higher energy molecules are mixed with lower energy molecules. When higher energy molecules are mixed with lower energy molecules the molecular motion will come into equilibrium over time. The faster moving molecules will slow down and the slow moving molecules will speed up. Temperature is the MEASURE of the AVERAGE molecular motions in a system and simply has units of (degrees F, degrees C, or K). Notice that one primary difference between heat and temperature is that heat has units of Joules and temperature has units of (degrees F, degrees C, or K). Another primary difference is that energy can be transported without the temperature of a substance changing (e.g. latent heat, ice water remains at the freezing point even as energy is brought into the ice water to melt more ice). But, as a general statement (ignoring latent heat), as heat energy increases, the temperature will increase. If molecules increase in vibration, rotation or forward motion and pass that energy to neighboring molecules, the measured temperature of the system will increase. 2. Water has one of the highest specific heat capacities known. There are however a few substances whose specific heat capacity is higher A large body of water can absorb and store a huge amount of heat from the sun in the daytime and during summer while warming up only a few degrees. And at night and during winter, the gradually cooling water can warm the air. This is the reason coastal areas generally have milder climates than inland rtegions. The high specific heat of water also tends to stabilize ocean temperatures, creating a favorable environment for marine life. THus because of its high specific heat, the water that covers most of Earth keeps temperature fluctuations on land and in water within limits that permit life. Also, because organisms are primarily made of water, they are more able to resist changes in their own temperature than if they were made of a liquid with a lower specific heat. .

1- How are temperature and heat different concepts- 2- How does the sp.docx

jbarbara1

1. According to the career opportunities on their websites, what are some of the things that all three firms (Volkswagen, Volvo, and Ford) offer to motivate new employees? Which of the three has the best motivational package? Solution Volkswagen Working at Volkswagen offers employees a robust portfolio of personal and professional development opportunities in addition to a great benefits package. As well as the opportunity to craft a unique and diverse career path, working at Volkswagen offers employees a robust portfolio of personal and professional development opportunities in addition to a great benefits package. In their effort to become a true employer of choice, we also look to provide a working environment that considers the unique operating requirements of individuals as well as the evolving landscape of the modern workforce. We are pleased to offer the Volkswagen Modern Apprenticeship Programme in conjunction with our training partner Vantage Automotive. This programme has been designed to equip apprentices with the relevant skills and knowledge to become fully qualified Volkswagen Service Technicians. Volvo Volvo offers Internships to their employees. It supports career development through activities ranging from training to individual coaching and mentoring. Volvo promoted self-managed learning and on the job training, based on challenging work assignments, opportunities for cross-functional projects, job rotation and international experience. This also includes the possibility of choosing between the specialist, the project manager and the leader career paths. Volvo provides opportunity to apply for both short-term and long-term assignments in a company or branch of operations abroad. Long-term opportunities with the Group include Leadership, Project Management and Specialist careers. Each path has a structure that consists of several levels, all linked to specific competences and development tools, activities and programs. They offer a structured way of developing and preparing employees for current and future roles. Ford Ford Motor Company is an equal opportunity employer committed to a culturally diverse workforce. All qualified applicants receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status or protected veteran status. Ford Motor Company is committed to take affirmative action to employ and advance in employment of such persons. opportunity to apply for both short-term and long-term assignments in a company or branch of operations abroad. Volkwagen has the best package as they develop their employees to be qualified technicians. .

1- According to the career opportunities on their websites- what are s.docx

jbarbara1

Which is the stronger acid in the following pair? Explain your reasoning. Be sure to answer all parts. p? Methoxyphenol o? Methoxyphenol The stronger acidity is due to (select all that apply): electron-donating inductive effects intra-molecular hydrogen bonding electron-withdrawing inductive effects conjugation with the substituent Solution 1. Ortho-methoxy phenol is more acidic than para Methoxy phenol. Since OMe is -I group and it stabilizes the phenoxide ion. As we know that strength of Inductive effect decreases with the increase of distance. Hence in para isomer, withdrawing effect of OMe is less compared to ortho isomer. 2. Options B, C and D are correct Intramolecular hydrogen bond: increase the acidity. Ex: ortho Nitro phenol is more acidic than para Nitro phenol, Hydrogen bonding stabilize the anion after proton loosing. -I groups (NO2, CHO, CN etc) increases the acidity Conjugation of group also increases the acidity by resonance Ex: phenol is more acidic than methanol since phenoxide is stabilized by resonance which is not possible to methoxide. .

Which is the stronger acid in the following pair- Explain your reasoni.docx

jbarbara1

Which is NOT true for solute retention? A) Retention time, t r, is the elapsed time between injecting the sample to the arrival of a sample component at the detector minus the dwell time between the end of the column and the detector. B) Adjusted retention time is t râ€™ = t r â€“ t m, where t r is the retention time and t m is the time for mobile phase or unretained solutes to pass through the column. C) The relative retention, ? = r 2 , is the ratio for the adjusted retention time for two t \' r1 components of the sample, where t r2â€™ > t r1â€™ so that ? > 1. D) The retention factor, k = t r ? t m , is the time, tr, required to elute a component t m K 1coefficients for components 2 and 1.minus the time, tm, for mobile phase to pass through the column divided by t m . E) The relative retention, ?, also equals K 2 , where K 2 and K 1 are the partition coefficients for components 2 and 1. Solution (A) is the answer. Reason: The absolute time taken by a compound to travel from the injector through the column to the detector is the retention time. Dwell time will not come into the definition. Rest all options are correct .

Which is NOT true for solute retention- A) Retention time- tr- is the.docx

jbarbara1

Which form type displays records in a tabular format similar to a Datasheet view but has more editing options, such as adding graphics? Datasheet Form Multiple Items Form Split Form Subform Which database property type increases the efficiency of a search on the designated field in the physical database? Validation rule Validation text Indexed Expression Which of the following describes a poor design consideration for a form? Arrange controls closely together or in a sequence that is easy to read by the user. Each form should have a different theme. Make labels descriptive and clear. Right-align labels followed by a colon and left-align bound controls. After running a query, which view will be shown? Datasheet Design Query Result A deletion anomaly is deleting facts about one entity successfully. deleting a table. deleting facts about one entity and deleting facts about another entity. deleting only one fact from a column. Solution 1) DataSheet Form It is a data entry form where we can display query result into tables. 2)Indexed Normally all data stored in database is indexed so that searching by integer index value is faster than searching whole data fields. Normally this search known as indexed search. 3)Right-align labels followed by a colon and left-align bound controls. 4) After running a query, the result shown in daraSheet view. 5)deleting facts about one entity successfully .

Which form type displays records in a tabular format similar to a Data.docx

jbarbara1

which equation best represents the net ionic reaction that occurs when an aqueous solution of barium iodide is mixed with an aqueous solution of lithium sulfate? No net reaction occurs Ba^2+(aq)+SO4^2-(aq)-> BaSO4(s) BaI2(aq)+Li2SO4(aq)-> BaSO4(s)+2LiI(aq) 2H^+(aq)+2I^-(aq)->2HI(g) Ba^2+(aq)+2I^-(aq)+2Li^+(aq)+SO4^2-(aq)-->BaSO4(s)+2LiI(aq) which equation best represents the net ionic reaction that occurs when an aqueous solution of barium iodide is mixed with an aqueous solution of lithium sulfate? No net reaction occurs Ba^2+(aq)+SO4^2-(aq)-> BaSO4(s) BaI2(aq)+Li2SO4(aq)-> BaSO4(s)+2LiI(aq) 2H^+(aq)+2I^-(aq)->2HI(g) Ba^2+(aq)+2I^-(aq)+2Li^+(aq)+SO4^2-(aq)-->BaSO4(s)+2LiI(aq) No net reaction occurs Ba^2+(aq)+SO4^2-(aq)-> BaSO4(s) BaI2(aq)+Li2SO4(aq)-> BaSO4(s)+2LiI(aq) 2H^+(aq)+2I^-(aq)->2HI(g) Ba^2+(aq)+2I^-(aq)+2Li^+(aq)+SO4^2-(aq)-->BaSO4(s)+2LiI(aq) Solution Ans Reaction between aqueous solution of barium iodide and lithium sulfate BaI 2 (aq) + Li 2 SO 4 (aq) -> BaSO 4 (s) + 2LiI(aq) From above reaction it is clear that formation of barium sulfate is solid i.e. in pure form so not participate in net ionic reaction So net ionic reaction is 2LiI(aq) -> 2 Li + (aq) + 2Cl - (aq) So last equation best to represent the net ionic reaction Ba 2+ (aq) + 2I - (aq) + 2Li + (aq) + SO 4 2- (aq) --> BaSO 4 (s) + 2LiI(aq) .

which equation best represents the net ionic reaction that occurs when.docx

jbarbara1

Which complex in the electron transport chain does not contribute to the proton gradient? Why not? Solution Ans - An electron transport chain ( ETC ) is a series of complexes that transfer electrons from electron donors to electron acceptors via redox (both reduction and oxidation occurring simultaneously) reactions, and couples this electron transfer with the transfer of protons (H + ions) across a membrane. This creates an electrochemical proton gradient that drives the synthesis of adenosine triphosphate (ATP), a molecule that stores energy chemically in the form of highly strained bonds. The molecules of the chain include peptides, enzymes (which are proteins or protein complexes), and others. The final acceptor of electrons in the electron transport chain during aerobic respiration is molecular oxygen although a variety of acceptors other than oxygen such as sulfate exist in anaerobic respiration. The four complexes involved in electron transport chain are Complex II does not contribute to proton gradient in electron transport chain. This complex oxidizes succinate, which is produced in TCA cycle, and transfers electrons to ubiquinone. This complex is not associated with any proton gradient. .

Which complex in the electron transport chain does not contribute to t.docx

jbarbara1

where heat is transfer high in conduction or convection where heat is transfer high in conduction or convection Solution CONDUCTION-- Conduction is the transfer of heat between substances that are in direct contact with each other. The better the conductor, the more rapidly heat will be transferred. Metal is a good conduction of heat. Conduction occurs when a substance is heated, particles will gain more energy, and vibrate more. These molecules then bump into nearby particles and transfer some of their energy to them. This then continues and passes the energy from the hot end down to the colder end of the substance. CONVECTION-- Thermal energy is transferred from hot places to cold places by convection. Convection occurs when warmer areas of a liquid or gas rise to cooler areas in the liquid or gas. Cooler liquid or gas then takes the place of the warmer areas which have risen higher. This results in a continous circulation pattern. Water boiling in a pan is a good example of these convection currents. Another good example of convection is in the atmosphere. The earth\'s surface is warmed by the sun, the warm air rises and cool air moves in. Hence more heat is transferred by CONDUCTION because of the direct contact. .

where heat is transfer high in conduction or convection where heat i.docx

jbarbara1

Where do most college students exist on Maslow\'s hierarchy of needs? Be descriptive in your explanation of why... Please be orginial no articles or cut and paste what are your real thoughts! Thanks !! Solution I think that most college students exist between the Love and Belong and Esteem parts of the hierarchy on the pyramid. Many College students have achieved a sense of love and belonging through relationships wthi their friends and family.Â Â Students have made social connections by being members of sports teams, clubs, fraternities, sororities and other types of activities that help to achieve this pyramid level. At the same time, the need for belonging may become overcome other needs depending on the level of peer pressure. Also, college students have a need to feel respected and values by others. This spills into the Esteem layer of Maslow\'s hierarchy pyramid. Students will participate in a hobby, team or other organization to gain recognition of others. By doing this, students achieve a sense of value and acceptance from others. In some cases, there will be a need to achieve popularity or fame but this will not assist in achieving actual happiness as the sense of value and acceptance must really come from within the student .

Where do most college students exist on Maslow-'s hierarchy of needs-.docx

jbarbara1

More from jbarbara1 (20)