Formatting and code conversion occurs in the Presentation layer of t.pdf

•

0 likes•2 views

Formatting and code conversion occurs in the Presentation layer of the OSI model and the Application layer of the TCP/IP stack.Formatting and code conversion are Presentation layer functions in the OSI model. The Application layer in TCP/IP maps to the top three layers of the OSI model. Solution Formatting and code conversion occurs in the Presentation layer of the OSI model and the Application layer of the TCP/IP stack.Formatting and code conversion are Presentation layer functions in the OSI model. The Application layer in TCP/IP maps to the top three layers of the OSI model..

Education

More from info30292

Rutherford model of atom 1) The electron cloud of the atom does not influence alpha particle scattering. 2) Much of an atom\'s charge (specifically, its positive charge) is concentrated in a relatively tiny volume at the center of the atom, known today as the nucleus. The magnitude of this charge is proportional to (up to a charge number that can be approximately half of) the atom\'s atomic mass - the remaining mass is now known to be mostly attributed to neutrons. This concentrated central mass and charge is responsible for deflecting both alpha and beta particles. 3) The mass of heavy atoms such as gold is mostly concentrated in the central charge region, since calculations show it is not deflected or moved by the high speed alpha particles, which have very high momentum in comparison to electrons, but not with regard to a heavy atom as a whole. But Bohr suggested instead that electrons inhabited certain spaces and circle the nucleus of the atom in specific energy levels and the forces of attraction were electrostatic forces, rather than gravity. Solution Rutherford model of atom 1) The electron cloud of the atom does not influence alpha particle scattering. 2) Much of an atom\'s charge (specifically, its positive charge) is concentrated in a relatively tiny volume at the center of the atom, known today as the nucleus. The magnitude of this charge is proportional to (up to a charge number that can be approximately half of) the atom\'s atomic mass - the remaining mass is now known to be mostly attributed to neutrons. This concentrated central mass and charge is responsible for deflecting both alpha and beta particles. 3) The mass of heavy atoms such as gold is mostly concentrated in the central charge region, since calculations show it is not deflected or moved by the high speed alpha particles, which have very high momentum in comparison to electrons, but not with regard to a heavy atom as a whole. But Bohr suggested instead that electrons inhabited certain spaces and circle the nucleus of the atom in specific energy levels and the forces of attraction were electrostatic forces, rather than gravity..

Rutherford model of atom1) The electron cloud of the atom does n.pdf

info30292

Raising the pH will increase the basicity of the solution. Since sulfate is a weak base, its molar solubility will decrease with increasing pH. This is because the base will be neutralized by the acid. When the solution is made more acidic, the solubility will increase. Hope this helps Solution Raising the pH will increase the basicity of the solution. Since sulfate is a weak base, its molar solubility will decrease with increasing pH. This is because the base will be neutralized by the acid. When the solution is made more acidic, the solubility will increase. Hope this helps.

Raising the pH will increase the basicity of the solution.Since su.pdf

info30292

Process improvement: The chance for development to either operating or management processes can frequently be vast, but must be focused. It is very important that the number of process improvement actions undertaken by an association is matched by the association’s capability to finance the association and apply the changes without destructive disturbance to day-to-day delivery of its products and services. Proposal excess and exhaustion is a common syndrome, and is ultimately counter- productive. 1. The aim of Process Selection is to select a small and attainable number of process, most directly influence the success of the association’s goals and objectives, ahead which to assume process improvement action. 2. The outcomes of the procedure Selection step should be decided number of processes to be review, organisation approval to offer reserve to the work and agreed objectives for the work. 3. Process Understanding, cover the capacity of the process where it starts and ends what is included and excluded. The sub-processes and accountability of the process to the association must be understood. 4. The outcomes of procedure Understanding are a high level process map, sub-process maps, accountability and the major inputs, outputs, controls and funds acting upon the processes and sub-processes. 5. Process act involves recording and detailing the historical act of the process, obtaining perceptual views of both current and past performance from customers and suppliers, important agreed required performance of the prospect enhanced process, and approving how it will be deliberate, monitored and reviewed 6. The outcomes of Process Performance are an perceptive of the key metric data, the ability of the process and customers, suppliers and staff necessities for the prospect improved process. 7. In Process Review, the data and information that has been composed and analysed is reviewed and recommendation made for the enhanced process. 8. Process Change translates the prioritised process improvement mandates into an integrated programmed of incessant improvement or process revamp action. 9. In the final Capturing the Change step, the process improvements are included into the business management system, ensures the change is reviewed, managed and built upon Solution Process improvement: The chance for development to either operating or management processes can frequently be vast, but must be focused. It is very important that the number of process improvement actions undertaken by an association is matched by the association’s capability to finance the association and apply the changes without destructive disturbance to day-to-day delivery of its products and services. Proposal excess and exhaustion is a common syndrome, and is ultimately counter- productive. 1. The aim of Process Selection is to select a small and attainable number of process, most directly influence the success of the association’s goals and objectives, ahead which to assume proces.

Process improvementThe chance for development to either operating.pdf

info30292

Net operating assets = operating assets-operating liabilities Net operating assets =100-40 =60 operating current assets = cash +accounts receivables+inventory = 10+50+40 =100 operating current liabilities = accounts payables+ accurals = 20+20 =40 Solution Net operating assets = operating assets-operating liabilities Net operating assets =100-40 =60 operating current assets = cash +accounts receivables+inventory = 10+50+40 =100 operating current liabilities = accounts payables+ accurals = 20+20 =40.

Net operating assets = operating assets-operating liabilitiesNet o.pdf

info30292

In above scenarion Animator class, Actor pikachu=new Actor (\"pickachu.png\", 100, 50); object reference variable is pikachu. Then it can used to call all the methods which are inside the Actor class I wrote the \"turnto\" method by helping of \"Movto\" method. Here is the example of Animator class public class Animator { public Animator() { } public static void main(String[] args) { Actor actor = new Actor(); actor.turnto(10,10000); } } I used to pass two parameters which are degree of rotation and sleep time period This Is Actor class after adding turnto method in addition to moveto method. In Here I Wrote only the turnto method code only package com.app.test; public class Actor { public Actor() { actor = new Actor(); } private Actor actor; private int x, y, startx, starty; private int rotate_Degree; private long starttime; private long duration; private boolean interpolation; private float currentScale = 1; private float destScale = 1; private float startScale = 1; private boolean interpolationScale; public Actor(String filename,int rotate_Degree){ x=rotate_Degree; actor = EZ.addImage(filename,rotate_Degree); actor.translateTo(x,y);; interpolation = false; interpolationScale = false; } public void turnto(int deg, long dur){ rotate_Degree = deg; duration = dur*1000; starttime = System.currentTimeMillis(); System.out.println(starttime); startx=x; interpolation = true; interpolationScale = false; } public void setScale(float s, float dur){ destScale = s; starttime = System.currentTimeMillis(); startScale = currentScale; interpolationScale = true; } public boolean moving() { return interpolation; } public boolean scaling() { return interpolationScale; } public void go(){ if (interpolation == true) { float normTime = (float) (System.currentTimeMillis() - starttime)/ (float) duration; x = (int) (startx + ((float) (rotate_Degree - startx) * normTime)); if ((System.currentTimeMillis() - starttime) >= duration) { interpolation = false; x = rotate_Degree; } // Dont forget to move the image itself. pikachu.translateTo(x,y); } if (interpolationScale == true){ float normTime = (float) (System.currentTimeMillis() - starttime)/ (float) duration; currentScale = (startScale + ((float) (destScale - startScale) * normTime)); if ((System.currentTimeMillis() - starttime) >= duration) { interpolationScale = false; currentScale = destScale; } actor.scaleTo(currentScale); } } } Solution In above scenarion Animator class, Actor pikachu=new Actor (\"pickachu.png\", 100, 50); object reference variable is pikachu. Then it can used to call all the methods which are inside the Actor class I wrote the \"turnto\" method by helping of \"Movto\" method. Here is the example of Animator class public class Animator { public Animator() { } public static void main(String[] args) { Actor actor = new Actor(); actor.turnto(10,10000); } } I used to pass two parameters which are degree of rotation and sleep time period This Is Actor class after adding turnto method in addition to mo.

In above scenarion Animator class,Actor pikachu=new Actor (picka.pdf

info30292

import java.util.*; public class NaturalNumberTriangle { public static void main(String args[]) { int rows, i, j, count = 1, star = 0; Scanner in = new Scanner(System.in); System.out.println(\"Enter number of rows in pattern\"); rows = in.nextInt(); for (i = 1; i <= rows; i++) { for (j = 1; j <= i; j++) { System.out.print(count + \" \"); count++; } System.out.print(\"\ \"); } } } Solution import java.util.*; public class NaturalNumberTriangle { public static void main(String args[]) { int rows, i, j, count = 1, star = 0; Scanner in = new Scanner(System.in); System.out.println(\"Enter number of rows in pattern\"); rows = in.nextInt(); for (i = 1; i <= rows; i++) { for (j = 1; j <= i; j++) { System.out.print(count + \" \"); count++; } System.out.print(\"\ \"); } } }.

import java.util.; public class NaturalNumberTriangle { publi.pdf

info30292

HNO3 is a strong acid pH = -log[H+] = -log[0.05] = 1.3p.pdf

info30292

From psychological and cognitive perspectives, there are two basic benefits of subordinates’ participation in budget setting. First, owing to identification and ego-involvement with budget goals, participation is related to performance and so, leads to enhanced motivation and commitment to the budget. Second, because of improving flow of information between superiors and subordinates, it leads to higher quality decisions. From this perspective, participation leads to higher motivation, higher commitment, higher quality decisions and hence higher performance. As known, the generally stated thesis is that budget preparation effects subordinates’ managerial performance positively. However, there is a possibility whether the way of linkage is negative or positive. Accordingly, while some studies have supported the argument that budget preparation positively and significantly associated with performance other studies have found either only a weak positive association between budget preparation and performance. Solution From psychological and cognitive perspectives, there are two basic benefits of subordinates’ participation in budget setting. First, owing to identification and ego-involvement with budget goals, participation is related to performance and so, leads to enhanced motivation and commitment to the budget. Second, because of improving flow of information between superiors and subordinates, it leads to higher quality decisions. From this perspective, participation leads to higher motivation, higher commitment, higher quality decisions and hence higher performance. As known, the generally stated thesis is that budget preparation effects subordinates’ managerial performance positively. However, there is a possibility whether the way of linkage is negative or positive. Accordingly, while some studies have supported the argument that budget preparation positively and significantly associated with performance other studies have found either only a weak positive association between budget preparation and performance..

From psychological and cognitive perspectives, there are two basic b.pdf

info30292

Correct answer is option A. As epistasis occurs when the effect of o.pdf

info30292

Cloud computing: It is a kind of net based computing that gives shared computer processing reserves and data to computers and other procedures on insist The performance of using a net of remote servers hosted on the Internet to store, administer, and process data, quite than a local server. Types of services: Infrastructure as a Service (IaaS), Platform as a Service (PaaS), Software as a Service (SaaS), Business Process as a Service (BPaaS) Advantages: Disadvantages: Solution Cloud computing: It is a kind of net based computing that gives shared computer processing reserves and data to computers and other procedures on insist The performance of using a net of remote servers hosted on the Internet to store, administer, and process data, quite than a local server. Types of services: Infrastructure as a Service (IaaS), Platform as a Service (PaaS), Software as a Service (SaaS), Business Process as a Service (BPaaS) Advantages: Disadvantages:.

Cloud computingIt is a kind of net based computing that gives sha.pdf

info30292

Check list/policy to be implemented for having controls for purchasing of Raw materials & Equipment Sl no Key Control Activity Model Audit review Plan ( may be modified suitably to achieve the control objectives) Purchasing 1 Purchase orders are placed only after obtaining the requisite number of quotes, vetted and approved as per purchase policy and authority matrix. To review whether a system of obtaining competitive quotes from eligible vendors, review of supplier’s quotes by purchase committee and the decisions/minutes are properly recorded. Purchase orders terms and conditions are as per standard company terms. 2 Purchase orders are placed only for approved. Requisitions by designated authorities as per Approval matrix. To review whether the Management approves all purchase orders, with higher level management authority required for unusual purchases (such as capital outlays or standing orders) and all purchases that exceed established limits. Board approval is also required for specified types of purchases and this approval is appropriately documented. • To understand whether the management reviews reports detailing overrides of established purchase order prices, terms, and conditions 3 Purchase orders are entered accurately. • For, samples selected, purchase order entry data is compared to source documents by individuals who are independent of the purchase order entry process. • To review and test whether purchase order data is edited and validated; identified errors are corrected promptly 4 All amounts for goods received are input and processed to accounts payable. Accounts payable amounts are accurately calculated and recorded. • Test check whether goods received are matched on-line or manually with purchase order details and/or invoices; long outstanding goods receipt notes, purchase orders, and/or invoices are investigated timely and accrued as appropriate; documents are cancelled once matched or on payment of the invoice to prevent reuse. • Test whether the invoices not matched to goods receipt notes (or other appropriate supporting documentation for services received) are investigated; payments on unmatched invoices require specific Management approval. • To trace the Invoices for services received to the appropriate authorization and accompanied by appropriate supporting Documentation. • To test Invoices, credit notes, and other adjustments related to accounts payable are backed by valid documents and management approvals. • Review the statements received from suppliers, on a sample basis and to test whether such statements are 5reconciled to the supplier accounts in the accounts p6ayable sub-ledger regularly and differences are Investigated. 8 Disbursements are only made for goods and services received and that too after the taking into consideration relevant credit period. To test check whether the management reviews supporting documentation before approving payments. To also test check whether individuals who make electronic .

Check listpolicy to be implemented for having controls for purchasi.pdf

info30292

ans C it is a process of forming diazo compund .pdf

info30292

Antidiuretic hormone is important in A. body\'s water balance. Antidiureric hormone (ADH) is secreted in response to shortage of water in body. This hormone stimulates reabsorption of water in DCT, CT and CD . Affects the level of antidiuretic hormone ; A. Plasma osmolality. BH, 17 years old is brought to the emergency department for treatment of injuries received in a motor vehicle accident. A.increased intracranial pressure may occur . BH\'s conditio stabilizes and he is scheduled for fusion surgery in 2 days. Suddenly he develops a blood pressure of 250/120, a severe headache, blurred vision and bradycardia. b- developing extreme spinal shock The major problems in evaluating the endocrine system include d- all the above Solution Antidiuretic hormone is important in A. body\'s water balance. Antidiureric hormone (ADH) is secreted in response to shortage of water in body. This hormone stimulates reabsorption of water in DCT, CT and CD . Affects the level of antidiuretic hormone ; A. Plasma osmolality. BH, 17 years old is brought to the emergency department for treatment of injuries received in a motor vehicle accident. A.increased intracranial pressure may occur . BH\'s conditio stabilizes and he is scheduled for fusion surgery in 2 days. Suddenly he develops a blood pressure of 250/120, a severe headache, blurred vision and bradycardia. b- developing extreme spinal shock The major problems in evaluating the endocrine system include d- all the above.

Antidiuretic hormone is important inA. bodys water balance.Ant.pdf

info30292

Al has metallic bonding while CHCl3 has dipole-dipole forces. Since metallic bonds are stronger than dipole-dipole forces, Al has the higher boiling point. NaI has ionic bonding while HF has hydrogen bonding. Since ionic bonds are stronger than hydrogen bonds, NaI has the higher boiling point. Solution Al has metallic bonding while CHCl3 has dipole-dipole forces. Since metallic bonds are stronger than dipole-dipole forces, Al has the higher boiling point. NaI has ionic bonding while HF has hydrogen bonding. Since ionic bonds are stronger than hydrogen bonds, NaI has the higher boiling point..

Al has metallic bonding while CHCl3 has dipole-dipole forces.Since.pdf

info30292

Add warm water to dissolve the KBr which is very soluble. This would become the aqueous layer and would be more dense and thus at the bottom. Add them to a sep funnel and decant. Evaporate the water off and you have the KBr. The remaining fluid in the sep funnel is npahthalene nickel carbonate is insoluble while sodium carbonate is, so therefore it would be easy to extract the sodium carbonate by adding water to the mixture first, add water to the mixture, barium chloride is soluble in water. then filter through and funnel and filter funnel. then add sodium sulphate, using the stove they will expand and separate. ( sodium cloride, and sand Solution Add warm water to dissolve the KBr which is very soluble. This would become the aqueous layer and would be more dense and thus at the bottom. Add them to a sep funnel and decant. Evaporate the water off and you have the KBr. The remaining fluid in the sep funnel is npahthalene nickel carbonate is insoluble while sodium carbonate is, so therefore it would be easy to extract the sodium carbonate by adding water to the mixture first, add water to the mixture, barium chloride is soluble in water. then filter through and funnel and filter funnel. then add sodium sulphate, using the stove they will expand and separate. ( sodium cloride, and sand.

Add warm water to dissolve the KBr which is very soluble. This would.pdf

info30292

14. b. effector 15. c. negative effector 16. a. the nerve cells slow down and fire at a slower rate. proglonged hypothermia can lead to death. 17. Negative feedback 18. c. The movement of molecules from a region of its high concentration to a region of its low concentration is called diffusion. Osmosis involves transport across a semi-permeble membrane. 19. c 20. d. The nitrogenous wastes are the most toxic of our wastes. Solution 14. b. effector 15. c. negative effector 16. a. the nerve cells slow down and fire at a slower rate. proglonged hypothermia can lead to death. 17. Negative feedback 18. c. The movement of molecules from a region of its high concentration to a region of its low concentration is called diffusion. Osmosis involves transport across a semi-permeble membrane. 19. c 20. d. The nitrogenous wastes are the most toxic of our wastes..

14. b. effector15. c. negative effector16. a. the nerve cells sl.pdf

info30292

1.playing audio in java Java sound API(package javax.sound) supports two types of audios: - sampled audio - musical instrument digital interface(MIDI) sampled audio: In the sampled audio ,the supported file formats are: AIFC,AIFF,WAVE,SND,AU and doesn\'t support the audio format MP3. Provide two ways to play the audio: using clip and using source data line using clip : (javax.sound.sampled.clip) used to play a short sound file. In this method the whole audio clip is loaded into the memoryto have control over audio clip before playing it. steps for playing the audio file: 1. create an audioInputStream for a given sound file. 2. acquire audio format and create DataLine.Info Object 3.Obtain the clip 4.open the AudioInputStream ,start playing 5.close the resource acquired using source data line :(javax.sound.sampled.SourceDataLine),used to play the long sound line. these type of sounds cant be preloaded into the memory so, the data is read into the buffer in the form of bytes repeatedly. steps for playing the audio file: 1. open the sorce data file similarly by creating,acquiring and obtaining as in clip. 2. open and start the sound file 3. repeatedly read a chunk of bytes from the AudioInputStream and send it to the SourceDataLine\'s buffer untill reaching the end f the file 4.close the resource acquired. Musical Instrument Digital Interface(MIDI): music is synthesized from special nodes and effects. steps for playing the audio: 1. allocate a sequence piped from a MIDI file 2. allocate a sequencer to play a MIDI sequence 3. set the current sequence for the sequencer to play 4. open the sequencer to load the sequence. 5. set the loop count by using SetLoopCount() and start playing the music by using start() 6. stop the play using stop(). 2. creating a timer: the Timer is provided in the java.util package. In which we create an instance for thread like Thread thread= new Thread(); then using this instance thread we use the sleep() available in the timer class as follows: thread.sleep(); here the arguments int the sleep() is nothing but the time in milli seconds for example: thread.sleep(2000) will sleep the process execution or triggering for 20 seconds. BLanks: 1. actionPerformed() in the Listener interface 2. 3. close() 4. 5. scope Solution 1.playing audio in java Java sound API(package javax.sound) supports two types of audios: - sampled audio - musical instrument digital interface(MIDI) sampled audio: In the sampled audio ,the supported file formats are: AIFC,AIFF,WAVE,SND,AU and doesn\'t support the audio format MP3. Provide two ways to play the audio: using clip and using source data line using clip : (javax.sound.sampled.clip) used to play a short sound file. In this method the whole audio clip is loaded into the memoryto have control over audio clip before playing it. steps for playing the audio file: 1. create an audioInputStream for a given sound file. 2. acquire audio format and create DataLine.Info Object 3.Obtain the clip 4.open the A.

1.playing audio in javaJava sound API(package javax.sound) support.pdf

info30292

1. Not legible2. Touch and taste are the two senses interpreted by.pdf

info30292

1 The entry to convert liabilities to revenue.2 Appears in the lia.pdf

info30292

statistically significantSolution statistically significant.pdf

info30292

More from info30292 (20)