1. Meco 7002 5A Milli-Ohm Meter with Software
• Basic Accuracy 0.25%
• Number of Poles: 2 Poles+Earthing
• Protection Type: IP44
• Manual or Auto Range
• Large LCD with Backlight
• Low Power Consumption
2. Meco Solar System Analyzer Kit
• Efficiency (%) calculation of solar system
• Temperature measurement of solar panels
• Irradiance measurement of sun light
• Optical USB Cable for PC Communication
• The Remote Solar Detector
is moisture-proof
• Solar Connector
3. Meco PHT 4545 AC Clamp On Power
& Harmonics Tester
• True RMS value (V and A) at 0.5% basic
accuracy
• Analysis of Total Harmonic Distortion(%THD-F)
• Analysis of Crest Factor (C.F.)
• Max, Min & Data Hold Function
• 1500 A AC
4. Fluke 115 True RMS Digital Multimeter
• Compact true-rms meter
• Large white LED backlight to work in poorly lit areas
• Resistance and continuity
• Min/Max/Average to record
signal fluctuations
• CAT III 600 V safety rated
• All you need for general
electrical and electronic testing
5. Meco 3510PHW Clamp On TRMS Power
Meter
• Resistance upto 100MΩ
• Check for Energized Circuits
• Capture Motor In-Rush Current Readings
• Determine Peak Power Demand Periods
• Ideal for Electrical Audit of Heating,
Ventilation & Aircon Systems
• 4 Digit LCD, 9999 Count
• 3 Phase Adapter
6. HTC LCR-4090Q Handheld LCR Meter
• Test signal frequency upto 10Khz
• Measurement up to 10 meas/sec
• Ultra – Low Power consumption
• Data Hold, Max / Min / Average Recording
• Standard Mini – USB Interface, SCPI Compatible.
• Large Character display with White backlight
7. HTC PDO-5060S Oscilloscope
• Vertical two channel, bandwidth of each channel
is 25Mhz, 60Mhz,100Mhz
• Real-time Max Sampling rate is 500MSa/s.
• Support communication interface
RS232, USB(main sub), RJ45 LAN
• Input attenuation 2mV/div
~ 50V/div, Easy to measure big signal
• 5.7 inch color display screen
8. Meco 65P Bench Top Digital Multimeter
• 6½ Digit Display (11,99,999 counts)
• High brightness vacuum fluorescent display
• Max. measurement rate : 1000 meas / sec
• Up to 30,000 readings storage (without statistics)
• 10 sets of multimeter setup
can be stored and loaded
• HI / IN / LO comparator function
• Calibration without opening the case
9. Meco 4671 Clamp On Leakage Current
Tester
• 10µA Ultra High Resolution
• Large Conductor Diameter (30mm)
• AC Current in 5 Ranges (40mA, 400mA, 4A, 40A, 60A)
• Wide Frequency Response (40Hz-1KHz)
• ACA, ACV, Ω and Continuity
• Large 3¾ Digit LCD (4000 Count)
• Display is Manual
• Low Battery Indication