Quick slideshow about removing an existing sidewalk, and laying a flagstone walkway on a concrete bed into mortar with a grout finish. http://serviceprof.blogspot.ca/2013/01/how-to-lay-flagstone-walkway.html

1. Laying A Flagstone Walkway
Mortar & Grout

2. Original Sidewalk
Removal of original sidewalk

3. Original sidewalk
Notice the section near door which contains wire in the
concrete.
We decided to leave it and taper down to driveway

4. Rent Jackhammer
We used a Makita (Breaker) from Home Depot

5. Sidewalk removed
From section near door to driveway

6. Sidewalk removed
Better view

7. Poured Concrete
Poured concrete from section near door to driveway & then
began positioning flagsone

8. start to lay stone
Mortaring flagstones onto concrete using Custom Building
Products Medium Bed Mortar.Tapering down as we go along.

9. continue to lay stones
Working from the wall out and down to the driveway.

10. finishing flagstone
All flagstone is now mortared to the concrete bed.

11. sealed flagstone
A critical step! Make sure to seal the flagstone with a quality
sealer.This will protect the flagstone from the grout that is next.

12. flagstone grouted
We used Natural Grey Saltillo Tile Grout which allows for larger
grout joints.

13. finished project
We resealed the entire surface, flagstone and grout.