Laying a flagstone walkway. We first removed the existing concrete sidewalk, poured new concrete, laid the flagstone in a mortar bed, grouted the flagstone and...

1. How To Lay A Flagstone
Walkway
~Flagstone Mortared on Concrete

2. Original Sidewalk
~Original sidewalk

3. Original sidewalk
~The enclosed section near door which contains wire in the
concrete and will not be removed.
We decided to leave it and taper down to driveway

4. Rent A Jackhammer
~We used a Makita (Breaker) from Home Depot

5. Sidewalk removal
~Sidewalk removed from section near door to driveway

6. Sidewalk removed
~Second view

7. Poured Concrete
~Poured concrete from section near door to driveway & then
began positioning flagsone

8. Laying flagstone
~Mortaring flagstones onto concrete using Custom Building
Products Medium Bed Mortar.Tapering down as we go along.

9. more flagstones
~Working from the wall out and down to the driveway.

10. finishing flagstone
~All flagstone is now mortared to the concrete bed.

11. sealed flagstone
A critical step! Make sure to seal the flagstone with a quality
sealer.This will protect the flagstone from the grout that is next.

12. flagstone grouted
~We used Natural Grey Saltillo Tile Grout which allows for larger
grout joints.

13. finished project
~We resealed the entire surface, flagstone and grout, with a
penetrating sealer.

14. flagstone walkway
~Visit our website ~ http://serviceprof.blogspot.com/