This document introduces various categories of cable trays manufactured by Indian companies. It discusses stepladder cable trays, which are used for power distribution and feature steps to securely hold cables. Channel cable trays are typically used for smaller cables up to 12 feet long that produce less heat. Single cable rails can be installed easily and used for low and medium voltage power systems. Wire baskets are suited for low voltage and fiber optic cables in telecommunications and can hold cables up to 8 feet long. Contact information is provided at the end.

1. WELCOME TO
TANYA GALVANIZERS
Introduction to The Various Categories of
Cable Trays Manufactured by Indian
Companies

2. • The power distribution and the communication industries alike has a larger dependency
on managing cable as the wires that gets utilized in the distribution of power and
communications requires to get extended and interleaved in such a manner so that the
hazards like the breaking out of the fire gets to check. Cable tray plays a crucial role in
both of these industries.
• These trays have its utilization to channelize the wire in the manner intended and the
trays are considered an indispensable component across varied industries that include the
construction industry. Accessories like the cable ducts, similarly, have great importance in
purposes like cable jetting.

3. Different Categories of the Cable Tray
• Stepladder Cable Trays :-
Stepladder systems find the maximum of its uses in power distribution. These cable ducts
accessory appears in the scene in steps to secure the cables in the effective manner. These get
installed with the efforts of the specialists in the application .

4. Channel Cable Trays :-
• Trough or the channel trays are generally used to support wires of comparatively lesser sizes
that range between five to twelve feet in length. This category of trays supports those cables
that yield lesser amount of heat. These trays for cables allow a smaller extent of ventilation.
These trays can be formed either of metallic or nonmetallic materials.

5. • Single Cable Rail :-
These categories of cable ducts can be installed very easily. It can be availed in
either single or multiple tiers. Typically, these are ten to twelve feet in length that
can be intersected very easily through this arrangement. It finds its typical
application to channelize the wire in power systems of low and medium voltage
capacities.

6. • Wire Basket :-
This category of trays finds its application across the telecommunication
industry specifically. It is the idealistic suits the wires of low voltage and fiber
optics. Usually, it is manufactured out of steel and in some cases, it can be
availed with a lamination of zinc on it too. Cables between three to eight feet in
length can be channelized easily through this category of the tray.

7. Contact Us :-
– Address :- Plot No. 289-290, Manjusar GIDC, Nr.
Bombardier Circle, Manjusar Savli, Vadodara – 391775.
– Phone :- (0265) 2632517 (O)
– Phone:- +91 8000842648
– Email:- info@galvanizers.co.in
– Website :- https://www.galvanizers.co.in/