FEC(World Class Testing Equipment)

1. FEC
R
World Class Testing Equipments
An ISO 9001 Certified Co.
Catalogue of Maltipass Test

2. The multi pass test stand is mainly used for testing the performance of
hydraulic filters according to 4548 - 12 and ISO 16889 standards. These
standards describe a method for determining the contaminant capacity,
particle removal and differential pressure characteristics of filter elements are
injected with continuous contaminant (tes dust), whereas online particle
sensors measure the contamination, thus making the evaluation of filter
elements performance possible. This test stand is automatically test report
generated through software controlled by a computer chart and all the test
parameters can be display on the screen. Data handling and generation of reports according to the standards
mentioned above are included.
Multi Pass Test Stand (ISO 4548 - 12)
The test stand is designed as a Multi Pass Test Stand acc. to ISO 4548 - 12 and ISO 16889 as a part of the
filter manufacturing and quality monitoring
Following tests can be performed with this test stand:
?Determination of filtration performance of a filter elements
?Determination of filtration performance of a flat sheet filter media which is optional
?Determination of particle retention ability and contamination holding capacity of a filter element
?Determination of differential pressure characteristics of a filter elements
www.fecproduct.com
The test stand is designed as a Multi Pass Test Stand acc. to ISO 19438 as a part of the filter manufacturing and
quality monitoring center.
Following tests can be performed with this test stand
?Determination of filtration performance of a filter element
?Determination of filtration performance of a flat sheet filter media which is opetional
?Determination of particle retention ability and contamination holding capacity of a filter element
?Determination lf differential pressure characteristics of a element
The multi pass test stand is mainly used for testing the performance of fuel
filters according to ISO 19438 standards. These standard describe a method
for determining the contaminant capacity, particle removal and differential
pressure characteristics of filter elements. In order to determine such
characteristics, filter elements are injected with continuous contaminant,
whereas online particle sensors measure the contamination, thus making the
evaluation of the filter elements performance possible. This test stand is
automatically test report generated through software controlled by a
computer chart and all the test parameters can be displayed on the screen.
Sales Office: 9A, Gurudwara Road, Hari Vihar (Kakraula), Opp. Metro Poll No. 816, New Delhi
110043 (INDIA).
Correspondence Address : Plot No. 35, K-1 Extn, Bank Wali Gali Gurudwara Road, Mohan Garden,
Uttam Nager, Delhi -110059.
Cell - 9811478874, 9811938703, 9212912990
E-mail - Info@fecproduct.com/ inquiry_fec@yahoo.com
Website - www.fecproduct.com