1. ENEBELI MARVIN
Surname Other names
# 23 Onokpasa avenue okan Phone: 08034738384, 07068505106
Agbarho, Delta State. E-mail: maxenebeli@gmail.com
CAREER OBJECTIVE
To achieve a successful career in a dynamic and challenging establishment where teamwork
and leadership play great roles through excellent services and productivity targeted towards
maximum success of the company’s objectives.
PERSONAL DATA
Gender: Male
Date of Birth: 3rd july, 1983
Nationality: Nigerian
State of Origin/L.G.A :Delta/Ndokwa East
Language: English, Kwale,Urhobo
Marital Status: Single.
Place Of Birth Sokoto State.
TECHNICAL SKILLS
Instrumentation & control Technologist
 Operational knowledge of Control Loop Equipment’s, fieldbus, PLC,DCS, ESD plant
automation control system.
 Installation & calibration of different types of smart electronic and pneumatic
instruments.
 Skilled in electrical interpretation of circuit drawing, instrument loop diagram,
equipment location drawing, general electrical wiring and schematic Diagram, piping
and instrumentation diagram(P&ID), loop checking, start-ups, instrumentation tubing,
instrument cable termination.
 Use ofpneumatic comparators or hydraulic dead weight tester.
 Good knowledge of plant safety rules & regulation
 Good knowledge on Planning shutdowns, start-up& managing all incidence
associated with plants, like issuing permit to workout(PTW), and lock out tag
out(LOTO)
 Familiar with the operation and maintenance of pumps, valves,& compressor.
 Hand and power tool proficiency
 Experienced in cable glanding&termination of instrument armoured cable at
designated points.
 Electronic and pneumatic instrument maintenance
 Process controlloop checking
 Troubleshooting process loops
 Valve stroking, testing of instrument integrity and accuracy
 Able following: manuals, schematics, loop diagrams, P&IDs and other specification.
 Effective knowledge of various pipes, valves & fittings
 Skilled in pipe isometric spools drawing and P&IDs
 Modify, clean & maintain tube system units, fittings
 Installation of automatic controls used to regulate process systems.
 Inspect, examine and test installed piping units using pressure gauges hydrostatic
testing, observation or other methods
 Safe work habits, communications &good knowledge of ANSI 3.3 code

2. WORKING EXPERIENCE
Power Holding Company Of Nigeria (PHCN) 2009 – 2010
Headoffice: Delta Electric Power Business Unit, P.M.B. 6, Ughelli, Delta State.
Department:P,C&M, Production,Electrical &Instrumentation
Position :Industrial Training
Job description:
1. Lighting blown lamp and the uses for soldering cable lugs and joints.
2. Carry out different methods of electrical installation, surface and Conduit, with
the use of PVC cable.
3. Various types of test in a new and old electrical installation.
4. Maintenance of different types of motor starters.
5. Maintenance of domestic and minor industrial appliances.
6. General maintenance of generators and motors dynamic sensors.
7. Termination and joining of PVC LT underground armored cable, Laying of
underground LT armored cable.
8. Installation of electrical equipment like junction boxes, control stationemergency stop
switches.
9. Installation and maintenance of flame sensors and thermocouple.
10. Installation of alarm system, explosion-protective control units.
11. Installationofcontrol loop equipment’s in assigned areas.
12. Monitoring turbine generator, lube oil unit, pumps and compressor units, valves &
piping.
NETCO-DIETSMANN NIGERIA LTD. 2012
Office:Intels Camp KM 16 Aba road Port Harcourt
Department:MAINTENANCE E, I, C & A.
Location/ facility:SPDC OBIGBO NODE GAS PLANT, OBIGBO, RIVERS STATE.
Job description:
1 Maintenance of HVAC system
2 Monitoring Diesel and Gas generator, fuel gas skid, glycol pumps
andcompressor units,
3 Loop checking of field instruments/Continuity & insulation resistance test of
electric motors.
4 Installation and maintenance of alarm system, explosion-protective control
units
5 Installation and maintenance of flame sensors, gas detectors and
thermocouple
6 Electronic and pneumatic instrument preventive and corrective maintenance
7 Reset faulty alarm on ESD/OSD and F & G system
8 Calibration pneumatic instrument such as switches, SVIs , Transmitters
9 Carrying out daily routine maintenance activities in line with HSE/HSSE
rules
10 Operation support activities in export/ sales gas manifold

3. INSTITUTION ATTENDED WITH DATE
Petroleum Training Institute, Effurun Delta State. 2012
Petroleum Training Institute, Effurun Delta State. 2009
AgbarhoGrammar School, Agbarho Delta State. 2002
QUALIFICATIONOBTAINED
National Youth Service Corp (NYSC) 2013
Higher National Diploma in Electrical Electronics Engineering
In INSTRUMENTATION &CONTROLENGINEERING2012
(UPPER CREDIT)
National Diploma in Electrical Electronics Engineering 2009
West Africa Examination Council (WAEC) 2008
Senior Secondary Certificate Examination 2002
AWARDS OBTAINED
 Awardof Institute Prize forBestgraduatingStudent 2013
HND Electrical ElectronicEngineering(Instrumentation
and Control option),PetroleumTrainingInstituteEffurun
2011-2012 Session. (Individual)
 SilverAwardforSTANDARDIZEDWORKprocessinline 2012
withRelentlessProductionImprovement(RPI)Standards
SPDCOBIGBO AG PLANT. (To the Team)
 Silver Award for effective implementation of the GO SEE 2012
process in line with Relentless Production Improvement (RPI)
Standards SPDC OBIGBO AGPLANT. (To the Team)
OTHER CERTIFICATIONS OBTAINED
 QualityAssurance andQualityControl(QAQC)(PetroleumtraininginstituteByPetroleum
AnalysisLab)
 Operation&maintenance of pumps, valves&compressor(PetroleumtraininginstituteBy
PetroleumAnalysisLab)
 Flow-stationoperation(Societyof PetroleumEngineersPTI)
 DrillingTechnology(National institute of petroleumengineersPTI)
 Wire-lineoperation(Societyof PetroleumEngineersPTI)
 SwimmingsurvivaltestwithPFD&PPE(SPDC)
 Fire fighting/Fire warden( By SPDC)
 PermitTo Work(PTW) competent(BySPDC)
 International Vocational Qualification(IVQ) C& G level 3(By SPDC)

4. PROFETIONAL BODY
 Member National Institute Of Electrical Electronic Engineering (NIEEE) Petroleum Training
Institute Chapter Effurun.
 Member Society Of Petroleum Engineering (SPE) Petroleum Training Institute Chapter
Effurun.
SOFT SKILLS/COURSE ATTENDED
Computer Skill: MS Office suite 2003-7 via MS Word, MS Excel, P&ID.
I have attended and participated in the following courses.
Quality Assurance and Quality Control
 DrillingTechnology
 Wire-lineoperation
 Process Automationand control engineering
 Flow-stationOperation&maintenance of pumps,valves&compressor
PROJECT ACOMPLISHED
 Construction of Direct On-Line Starter2009
 Rehabilitation of Liquid Metering Station and
installation of Differential Pressure Transmitter for custody transfer2012
 Installation, Pre-commissioning and Commissioning of Rotary
viscometer TT-7 for measurement of notonial and non-notonial fluid2012
viscosity.
PERSONAL STRENGTH
 Highly Practical minded
 Capacity and mental focus to work under stress
 Can work with little or no supervision.
 Team player
 Flexibility and openness to acquisition of new skills and methods
 Diligent time keeping, reliable and willing to help
REFEREES
Engr. A. Musa
Electrical Electronic Engineering Department,
Petroleum Training Institute,
P.M.B. 20, Effurun Delta State.
Phone: 08033193241
Godpower Nwokogba
Production Superintendent
Century Energy Services Ltd
Port Harcourt, Rivers State
Phone: 08069585027
Engr. Ogor Abraham
Electrical and Instrumentation Supervisor
Netcodietsmann O & M
AGG Gas plant Obigbo
Port Harcourt, Rivers State
Phone: 08068491880