4. INTELLIKEYS 2.6
BILL OF MATERIAL
- 1800 mm L-profile 20mm
- 600 cm² 2mm plate
- 400 mm square tube 20mm
- 150 mm square tube 25mm
- telescopic grip
- 350 mm x 600 mm x 4 mm transparant plexi
- 3 m 3M Dual Lock
- 6 M4x40 screws + bolts
- primer paint
- finishing paint
Eight different tools are needed
Nine parts are standard and bought.
Six parts have been made tailored
5. 1 INTELLIKEYS 2.6
DESCRIPTION Weld the support
frame. Use our technical drawning as starter but
mind your own needs.
What angle do you want/need? Do you need an
external typing divice? …
Saw the different profiles to length, weld it all
together and grind the welds smooth
See technical plan
2 hours
Weldingmachine, Metalsaw, Grinding machine
L profiles, square profile and metal plate
1st part is made
€ 10
6. 2 INTELLIKEYS 2.6
DESCRIPTION Tape allsections you
don’t want to paint. First spray a primer and
after letting it dry long enough spray the frame
with one or two layers of the disired colour.
No technical plan
6h
Papertape,
Primer, paint
3 layers of paint were added
€20 .
7. 3 INTELLIKEYS 2.6
DESCRIPTION Instal the telescopic
grip on the welded frame with the screws. Make
sure the screws have champered heads so they
dont block the telescopic parts.
When you don’t need an external keyboard you
probably won’t need this telescopic grip,
because the grip is used in combination with the
keyboardmount. It makes it possible to open and
close the laptop without dismounting the laptop.
When this is the case, simply mount your laptop
on the frame (see last step)
No technical plan
10 min
Screwdriver , wrenches
4 x M4x40 fastners
5 added parts
€ 0.50
8. 4 INTELLIKEYS 2.6
DESCRIPTION Laser the plexicover
adjusted to your own needs.
Ask HOWEST to do it for you or go to
coorporation who’s able to do this for you.
Adjust the drawning to your own needs
See technical plan
10 min
CNC lasertool
350 x 600 x 4 mm PMMA/plexi
1 part added
€ 60
9. 5 INTELLIKEYS 2.6
DESCRIPTION Bend the plexicover
Use a hot air blower or a line bending machine.
See technical plan
30 min
Hot air blower
No parts were bought
No parts were added
€0
10. 6 INTELLIKEYS 2.6
DESCRIPTION
frame with the velcro
Tape al the part to the
No technical drawning
20 min
No tools were use
M3 DualLock velcro tape
1 part added
€ 10
11. 7 INTELLIKEYS 2.6
DESCRIPTION
the parts
Mount the plexi over
No technical drawning
5 min
Screwdriver
2 M4x40 screws
2 parts added
€ 0.25
12. 8 INTELLIKEYS 2.6
DESCRIPTION Attach the holder to
the wheelchair. The holder is a bigger square
pipe in which the frame is shoven.
Mount this holder according to the best fitting
possibility. Welding, screwing, …
We could not complete this step yet because
our patient, Karel, was going to change
wheelchair again soon after our deadline.
No technical drawning
15 min
Weldingmachine
Square profile
1 part added
€2