4. FOTOTOESTEL 2.2
BILL OF MATERIAL
- One 3D printed grip
- One 3D printed part for the button
- One metal part
- One inox part
- Button 1 : Druktoets IP67-drukknop zwart
- Button 2: IMPULSSCH.WIT
- Three Jumper Wires Premium 6" F/F Pack of 10
- Male connector RM 2,54, recht
- One bolt M6
- Four machine screw M3 x 16
16 different tools
14 standard parts
5 made parts
5. 1 FOTOTOESTEL 2.2
DESCRIPTION
Download the files ‘Handvat.stl’
‘Hulpstuk_Knop.stl’ , which are available on our
and
blog (http://fototoestel2012.blogspot.be/).
Upload these files on , for example , ‘Shapeways’
(http://www.shapeways.com/) and you will see
the prices for these parts instantly.
Place the two part in the cart , fill in the delivery
address and pay. Within two or three weeks, you
will receive your parts.
Parts files on: http://fototoestel2012.blogspot.be/
2 - 3 weeks
3D printer
No standard parts added
2 parts added
88.08 €
6. 2 FOTOTOESTEL 2.2
DESCRIPTION
Print out the technical plan ‘Onderplaat’ and cut
it out .
Technical plan ‘ Onderplaat’ on
http://fototoestel2012.blogspot.be/
3 minutes
A printer and scissors
No standard parts added
No parts added
0€
7. 3 FOTOTOESTEL
DESCRIPTION
Stick to the back side of the technical plan some
double-sided tape.
Technical plan ‘ Onderplaat’ on
http://fototoestel2012.blogspot.be/
1 minute
Double-sided tape, scissors or cutter
No standard parts added
No parts added
3
0€
8. 4 FOTOTOESTEL 2.2
DESCRIPTION
Stick the technical plan on a steel plate
(thickness 3mm)
Technical plan ‘ Onderplaat’ on
http://fototoestel2012.blogspot.be/
1 minute
No tools
Steel plate (thickness 3 mm)
1 part added
5€
9. 5 FOTOTOESTEl 2.2
DESCRIPTION
Fix the plat to the table of milling machine and
mill this part. Next, four holes , with a diameter
of 3 mm, and one hole, with a diameter of 6
mm, needs to be drilled
Technical plan ‘ Onderplaat’ on
http://fototoestel2012.blogspot.be/
45 minutes
Milling machine, drilling machine
No standard parts added
No parts added
0€
10. 6 FOTOTOESTEL 2.2
DESCRIPTION
For the attachment of the handle at the bottom
of the camera, a M6 bolt is used.
This bolt needs to be shortened with a Dremel or
grinding wheel.
Technical addendum : ‘Bolt’
1 minute
Dremel or grinding wheel
Bolt M6
1 part added
1€
11. 7 FOTOTOESTEL 2.2
DESCRIPTION
Print out the technical plan ‘Plaatje’ and cut it
out .
Technical plan ‘Plaatje’ on
http://fototoestel2012.blogspot.com
3 minutes
A printer and scissors
No standard parts
No parts were added
0€
12. 8 FOTOTOESTEL 2.2
DESCRIPTION
Stick to the back side of the technical plan some
double-sided tape and stick it to a inox plate
(thickness 1mm)
Technical plan ‘Plaatje’ on
http://fototoestel2012.blogspot.be/
1 minute
Double-sided tape, scissors or cutter
Inox plate 1mm
1 part added
3€
13. 9 FOTOTOESTEL 2.2
DESCRIPTION
Fix the plat to the table of milling machine and
mill this part. Next , place the part in a folding
machine, and fold the smaller part of this part.
Technical plan ‘Plaatje’ on
http://fototoestel2012.blogspot.be/
40 minutes
Milling machine, folding machine
No standard parts added
1 part added
0€
14. 10 FOTOTOESTEL 2.2
DESCRIPTION
Drill the hole (diameter 1.5 mm) indicated on
the technical plan. With a Dremel, the slot in
this part could be made.
Technical plan ‘Plaatje’ on
http://fototoestel2012.blogspot.be/
25 minutes
Drilling machine, Dremel
No standard parts added
No parts added
0€
15. 11 FOTOTOESTEL 2.2
DESCRIPTION
For this step, two standard buttons needs to be
purchased. The technical plan show how the
buttons should be soldered.
Technical addendum : ‘ Connection buttons’,
‘Buttons’ and ‘Connector’
15 minutes
Soldering iron
Soldering tin, 2 buttons , 3 x Jumper Wires
Premium , Male connector
6 parts added
15 €
16. 12 FOTOTOESTEL 2.2
DESCRIPTION
Cover the grip (and camera) with paper and
painting tape so that only the button is still
visible.
No technical plan
3 minutes
Paper, painting tape
No standard parts added
No parts added
0 €
17. 13 FOTOTOESTEL 2.2
DESCRIPTION
First, spray the button with a plastic primer.
After about 15 minutes, the button can be
sprayed with a black color. Lat the paint dry
long enough.
No technical plan
60 minutes
Plastic primer, black paint spray
Plastic primer, black paint spray
No parts added
10 €
18. 14 FOTOTOESTEL 2.2
DESCRIPTION
The grip can be connected to the camera. Use
the technical plan ‘Connection grip –camera‘
attached in the technical addendum .
Technical addendum : ‘connection grip –
camera’
1 minute
Spanner
No standard parts
Bolt (step 6 assembly manual)
0 €