Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.
http://designforeveryone.howest.be/
BRIEFPLOOIER 1.4                          45,50 euro                    159 minhttp://briefplooier2012.blogspot.com/      ...
ASSEMBLY MANUAL   PLOOIHULP    http://designforeveryone.howest.be/
BRIEFPLOOIER 1.4BILL OF MATERIAL-   4 lasered MDF parts-   2 lasered plexi parts-   4 anti slip caps-   Anti -slip-   4 bo...
1   BRIEFPLOOIER 1.4    DESCRIPTION    Put glue on the 3 tabs.           /           2 min           Glue           /     ...
2   BRIEFPLOOIER 1.4    DESCRIPTION    Attach the glued tabs to the base plate.           /           2 min           /   ...
3   BRIEFPLOOIER 1.4    DESCRIPTION    Sand the edges until there is no heigth    difference left.         /         3 min...
4   BRIEFPLOOIER 1.4    DESCRIPTION    Paint the whole assembly with purple paint. Use    a fabric roller for the best res...
5   BRIEFPLOOIER 1.4    DESCRIPTION    Paint the flower with a small pensil.           /           60 min           Paints...
6   BRIEFPLOOIER 1.4    DESCRIPTION    Cut the anti slip in the right size (100 x 90). This    must be done twice.        ...
7   BRIEFPLOOIER 1.4    DESCRIPTION    Attach the anti slip to the base plate with the    lasered plexi parts. Use the 4 b...
8   BRIEFPLOOIER 1.4    DESCRIPTION    Attach the 4 anti slip caps to the back of the    base plate.          /          1...
ASSEMBLY MANUAL    SNIJHULP    http://designforeveryone.howest.be/
BRIEFPLOOIER 1.4BILL OF MATERIAL-   4 lasered MDF parts-   1 pair of scissors-   4 Anti –slip caps-   2 screws-   1 wooden...
1   BRIEFPLOOIER 1.4    DESCRIPTION    First, cut of the handles from the pair of scissors.    Secondly, weld the big scre...
2   BRIEFPLOOIER 1.4    DESCRIPTION    Put glue on all lasered MDF parts.           /           3 min           glue      ...
3   BRIEFPLOOIER 1.4    DESCRIPTION    Glue the 4 MDF parts in layers.    The layers from bottum to top:    - Frame    - s...
4   BRIEFPLOOIER 1.4    DESCRIPTION    Sand the edges until there is no heigth    difference left.         /         8 min...
5   BRIEFPLOOIER 1.4    DESCRIPTION    Drill a hole with a diameter of 12 mm with a    depth of 10 mm.          /         ...
6   BRIEFPLOOIER 1.4    DESCRIPTION    Paint the whole assembly with purple paint. Use    a fabric roller for the best res...
7   BRIEFPLOOIER 1.4    DESCRIPTION    Paint the text at the back with a small pensil in    yellow paint. The wooden handl...
8   BRIEFPLOOIER 1.4    DESCRIPTION    Attach the pair of scissors to the base with 2    screws.          /          2 min...
9   BRIEFPLOOIER 1.4    DESCRIPTION    Attach the 4 anti slip caps to the back of the    base plate.          /          1...
TECHNICAL ADDENDUM      http://designforeveryone.howest.be/
Laser cut in MDF  plate 6 mm
TEAM CONTACTS   http://designforeveryone.howest.be/
lenn.tilley@gmail.com    TEL +32 479 65 57 86      sixivo@gmail.com     TEL +32 474 23 15 46   Tine.bossuyt@hotmail.com   ...
Upcoming SlideShare
Loading in …5
×

Montageplan briefplooier definitieve versie

1,526 views

Published on

  • Be the first to comment

  • Be the first to like this

Montageplan briefplooier definitieve versie

  1. 1. http://designforeveryone.howest.be/
  2. 2. BRIEFPLOOIER 1.4 45,50 euro 159 minhttp://briefplooier2012.blogspot.com/ Ivo Six / Lenn Tilley / Tine Bossuyt / Cellini De Langhe http://designforeveryone.howest.be/
  3. 3. ASSEMBLY MANUAL PLOOIHULP http://designforeveryone.howest.be/
  4. 4. BRIEFPLOOIER 1.4BILL OF MATERIAL- 4 lasered MDF parts- 2 lasered plexi parts- 4 anti slip caps- Anti -slip- 4 bolts M 2,5- 4 nuts M 2,5 9 different tools are needed 13 standard parts 6 made parts
  5. 5. 1 BRIEFPLOOIER 1.4 DESCRIPTION Put glue on the 3 tabs. / 2 min Glue / 4 parts added €1
  6. 6. 2 BRIEFPLOOIER 1.4 DESCRIPTION Attach the glued tabs to the base plate. / 2 min / / 0 parts added €0
  7. 7. 3 BRIEFPLOOIER 1.4 DESCRIPTION Sand the edges until there is no heigth difference left. / 3 min Sandpaper / 0 parts added € 0,50
  8. 8. 4 BRIEFPLOOIER 1.4 DESCRIPTION Paint the whole assembly with purple paint. Use a fabric roller for the best result. / 15 min Paint & paint roller / 0 parts added €5
  9. 9. 5 BRIEFPLOOIER 1.4 DESCRIPTION Paint the flower with a small pensil. / 60 min Paints & pensil / 0 parts added €5
  10. 10. 6 BRIEFPLOOIER 1.4 DESCRIPTION Cut the anti slip in the right size (100 x 90). This must be done twice. / 2 min Cutter knife & lath Anti slip 1 part added € 10
  11. 11. 7 BRIEFPLOOIER 1.4 DESCRIPTION Attach the anti slip to the base plate with the lasered plexi parts. Use the 4 bolt and 4 nuts of M 2,5. / 5 min Screwdriver Anti slip 12 parts added €0
  12. 12. 8 BRIEFPLOOIER 1.4 DESCRIPTION Attach the 4 anti slip caps to the back of the base plate. / 1 min / 4 anti slip caps 4 parts added €1
  13. 13. ASSEMBLY MANUAL SNIJHULP http://designforeveryone.howest.be/
  14. 14. BRIEFPLOOIER 1.4BILL OF MATERIAL- 4 lasered MDF parts- 1 pair of scissors- 4 Anti –slip caps- 2 screws- 1 wooden handle- 1 big screw 12 different tools are needed 9 standard parts. 5 made parts
  15. 15. 1 BRIEFPLOOIER 1.4 DESCRIPTION First, cut of the handles from the pair of scissors. Secondly, weld the big screw on top of the pair of scissors and drill two holes in it. The diameter of the holes must be 2 mm. / 15 min Welder, drilling machine, drill and saw Screw and pair of scissors 2 parts added € 10
  16. 16. 2 BRIEFPLOOIER 1.4 DESCRIPTION Put glue on all lasered MDF parts. / 3 min glue / 4 parts added €1
  17. 17. 3 BRIEFPLOOIER 1.4 DESCRIPTION Glue the 4 MDF parts in layers. The layers from bottum to top: - Frame - square with text downwards, - simple square - U-form / 3 min / / 0 parts added €0
  18. 18. 4 BRIEFPLOOIER 1.4 DESCRIPTION Sand the edges until there is no heigth difference left. / 8 min Sand paper / 0 parts added € 0,50
  19. 19. 5 BRIEFPLOOIER 1.4 DESCRIPTION Drill a hole with a diameter of 12 mm with a depth of 10 mm. / 2 min Drilling machine & drill / 0 parts added €0
  20. 20. 6 BRIEFPLOOIER 1.4 DESCRIPTION Paint the whole assembly with purple paint. Use a fabric roller for the best result. / 15 min Paint & roller / 0 parts added €5
  21. 21. 7 BRIEFPLOOIER 1.4 DESCRIPTION Paint the text at the back with a small pensil in yellow paint. The wooden handle must also be painted yellow. / 20 min Paint & pencil / 0 part added €5
  22. 22. 8 BRIEFPLOOIER 1.4 DESCRIPTION Attach the pair of scissors to the base with 2 screws. / 2 min Screwdriver screws 1 part added € 0,50
  23. 23. 9 BRIEFPLOOIER 1.4 DESCRIPTION Attach the 4 anti slip caps to the back of the base plate. / 1 min / 4 anti slip caps 4 parts added €1
  24. 24. TECHNICAL ADDENDUM http://designforeveryone.howest.be/
  25. 25. Laser cut in MDF plate 6 mm
  26. 26. TEAM CONTACTS http://designforeveryone.howest.be/
  27. 27. lenn.tilley@gmail.com TEL +32 479 65 57 86 sixivo@gmail.com TEL +32 474 23 15 46 Tine.bossuyt@hotmail.com TEL +32 474 55 63 80Cellini_de_langhe@hotmail.com TEL +32 479 57 65 23 ann.dekijvere1@telenet.be TEL +32 51 24 61 90 http://designforeveryone.howest.be/

×