Managed pressure drilling (MPD) is a drilling process that precisely controls the annular pressure profile to manage the downhole pressure environment and avoid continuous influx of formation fluids to the surface. MPD combines a rotating control device with surface control of annular pressure to control the wellbore pressure profile, rather than relying on mud weight alone. MPD can be applied reactively as a form of enhanced well control or proactively to mitigate drilling hazards and reduce non-productive time by enabling changes to drilling programs. Key MPD equipment includes the rotating control device, manifolds, chokes, and automated control systems.
The Most Attractive Pune Call Girls Manchar 8250192130 Will You Miss This Cha...
MPD familiarization Presentation april 2016.pptx
1. June 22,2016
Introduction to
Managed Pressure Drilling
Tushar Dmonte
MPD wellsite supervisor
Secure Drilling Services
Weatherford Oil Tool Middle East Ltd
2. Managed Pressure Drilling
Managed Pressure Drilling
Optimized Drilling Process
The term MPD to cover situations
in which the well is not intentionally
encouraged to flow to surface
during drilling, but the wellbore
pressure profile is tightly managed
with engineered equipment &
processes.
Rather than relying on mud weight
alone, MPD systems control
wellbore pressure profile by
combining a rotating control device
with surface control of annular
returns pressure.
3. 3
MPD Definition
MPD - An adaptive drilling process used to precisely control the
annular pressure profile throughout the wellbore. The objectives
are to ascertain the downhole pressure environment limits and to
manage the annular hydraulic pressure profile accordingly. The
intention of MPD is to avoid continuous influx of formation fluids to
the surface. Any influx incidental to the operation will be safely
contained using an appropriate process.
4. Reactive vs Proactive MPD
The technique is effectively on
“standby” as an enhanced
form of passive well control to
help manage unexpected
downhole pressure.
The technique is used to its
maximum effectiveness to
mitigate a wide range of
drilling hazards. Proactive
MPD radically reduces drilling
NPT by enabling fundamental
changes to fluid casing and
openhole programs
Reactive Proactive
5. Managed Pressure Drilling - Introduction
Drivers for Apply MPD – where is it applicable?
What is not MPD?
Summary of advantages
The cost – benefit ratio
10. 10
Kick Detection & Wellcontrol
• MPD enhances the first level of
well control, that is related with
the drilling fluid, through
additional equipment and
processes.
• At the same time, also
enhances the kick detection
systems utilizing equipment
that is more accurate.
Managed Pressure Drilling
11. Kick Detection while drilling
A kick is defined as an undesirable influx
of formation fluid into the borehole
If left unattended a kick can develop into
a blowout (an uncontrolled influx of
formation fluid into the borehole).
Penalty for failing to control a kick can be
the loss of the well, and quite possibly the
loss of the rig and the lives of the crew
Detecting a kick early and limiting its
volume makes the difference between a
manageable situation and one that lead
to a loss of control
12. All rig safety equipment
remains unchanged
Flare
System
Rig
MGS
To Rig
Mud System
Aux. Separator
(Optional)
RCD
MPD EQUIPMENT
13. Formation Evaluation – Dynamic FIT
The application of MPD will allow the determination
the performance of “Dynamic FIT” by the increase
of the bottom hole pressure through a controlled
annular backpressure.
Managed Pressure Drilling
Formation Evaluation – Formation Pressure
The application of MPD will allow the
determination the performance of “ascertain”
the formation pressure
14. In what cases MPD can add value?
-Drill conventionally “Un-drillable” tight Pore/Collapse/Fracture pressure gradients
-Drill “Un-drillable” vuggy/fractured carbonates where OB circulation is impossible
-Drill to target depth in wells with high in-situ stresses
-Wells with rapid-change in pore pressure regimes, abnormal pressure regimes
-Increase ROP drilling closer to balanced condition
-Reduce number of loss/kick occurrences
-Reduce time spent dealing with well control events
-Detect and manage kicks/losses earlier
-Differentiate Kick from Ballooning
-Reduce pressure cycles that cause fatigue-related borehole instability
-Reduce open hole exposure-time induced borehole instability
-Reduce mud costs
-Set casing deeper
-Optimize number of casing strings
-Trip safely
-Remove H2S hazard from rig floor
-Drill HPHT wells safely
-Positive fluid containment at surface in marine or other environmentally sensitive locations
Challenges while Drilling Exploratory, Appraisal or Development wells.
while
saving
cost,
reducing
NPT’s
and
improving
safety
Drill to
the target
The value
15. MPD SYSTEM CAPABILITIES
• A variety of options:
– Controlling pressure (manual or automatic): BHP, surface
back-pressure, stand pipe pressure, ….
– Automatic kick detection and control: pore pressure
determination
– Automatic loss detection and control: frac pressure
determination
• Option selection based on well design, well problems and well
objectives.
17. MPD Variants
The goal of managed
pressure drilling (MPD) is to
use a closed and
pressurizable circulating fluid
system to control the pressure
profile throughout the wellbore
in a way that eliminates many
of the drilling and wellbore
stability issues that are
inherent to conventional
drilling
Pressurized mud-cap drilling MPD enables drilling in
extreme-loss situations.
Constant bottomhole pressure MPD reduces NPT
and enables drilling when pore- to fracture-pressure
gradient windows are narrow,
Dual gradient MPD enables total well depth in the
right hole size in deep-well and deepwater drilling.
Returns-flow-control (HSE) MPD reduces risk to
personnel and the environment from drilling fluids
and well control incidents.
PMCD
CBHP
DG
HSE
18. Constant Bottom Hole Pressure (CBHP)
Challenge
Narrow pore- to fracture-pressure gradient windows present a drilling hazard.
When the hole is being drilled ahead or circulated clean the formation fractures
and losses are incurred. When circulation is ceased a kick occurs. A kick-loss
situation ensues, and nonproductive time (NPT), lost fluid costs and HSE
escalate.
Constraints
Reservoir hydrocarbon returns to surface are not desirable and may be
prohibited. Target total well depth must be reached with a certain hole size if
well productivity is to be optimized. A conventional ,drilling fluids program—and
associated number of casing strings—is jeopardizing these objectives.
Answer - Constant Bottom Hole Pressure (CBHP)
Applied annulus backpressure is controlled by an RCD that allows maintaining
BHP at a constant value that does not exceed formation fracture gradient, even
when circulating.
19. Constant Bottom Hole Pressure (CBHP)
Features, Advantages and Benefits
• Annulus backpressure is controlled at surface which means that changes in
BHP normally occurring when operating the mud pumps to circulate and
sdrill ahead do not occur.
• Whether the mud column is static or dynamic, BHP is constant and can be
more easily maintained within the bounds of a narrow pore-to fracture-
pressure gradient window.
• The ability to more accurately “walk the line” between pore- and fracture-
pressure gradients means that the hole section can be drilled deeper before
drilling mud density is changed and casing must be set.
• Pore-pressure estimate uncertainty can be easily accommodated by simple
adjustment of applied annulus backpressure.
• Deeper casing shoes help ensure that the well is drilled to TD in the target
hole size.
• Drilling with a fluid that is “lighter than conventional wisdom would
prescribe” significantly imcreases rate of penetration.
• A more constant BHP reduces pressure variations that would otherwise
promote wellbore instability.
24. • High Pressure Bearing
• Positive Oil Injection
• Coolant Circulation System
• Easy to install and removal –
during drilling operation
• Exchangeable
Rotating Control Device (RCD)
25. MANUAL: Manual control of the choke position, with monitoring of flow in and
out, remote transmission of data and remote visualization using website, as long
as an internet connection at the well site is provided.
SEMI-AUTOMATIC: Surface back pressure set point control.
AUTOMATIC PRESSURE CONTROL: Automatic control of any pressure
variable desired – BHP, stand pipe pressure, surface back pressure, annular
pressure at reference depth.
AUTOMATIC KICK /LOSS CONTROL: Automatic kick and losses detection and
control.
MPD – System Flexibility
27. MODEL 2700
Coriolis Transmitter
MODEL 2700
Coriolis Transmitter
Mass Flow Meter
A CMF 400M, Coriolis
type, mass flow meter, is
installed on the
manifold.
The flow meter provides:
• mass flow
• volumetric flow
• density
• return mud temperature
28. 28
Surface Back Pressure Control
• Maintain stable BHP during connections.
• Change pressure gradients in well by applying
surface back pressure.
• Instantaneous change in BHP compared to
increasing mud weight.
• Optimize mud weight for ROP.
• Reduce mud weight by decreasing BP in
static/dynamic modes
– Static overbalanced vs. dynamic
overbalanced condition.
• “Drill the undrillable” – tight PP-FG margins.
30. Intelligent
Control
Unit
Mass
Flow
Meter
Choke B
Choke A
Fluid From Well
Automatic MPD System – Microflux
• The manifold has two drilling chokes, so that one can be used at all times with the
second one to be used as contingency
• The mass flow meter is installed at the manifold, just downstream the chokes
31. 1.Drilling Events Detection and Control Process allows for
kick and loss detection, and automatic control and circulation
of influxes with computer driven automated choke.
2.MPD Process allows for manipulating the standpipe
pressure or surface back pressure as necessary.
Automatic MPD System
32. Auto-Control On/Off: These modes enable/disable the automatic
reaction of the choke to any detected influx
Auto-Control On: This mode enables the automatic reaction of the
choke to a detected influx. If an influx is detected, then the system will
proceed to “kick modes” to automatically operate the choke to control
and circulate the influx out of the wellbore.
Auto-Control Off: This mode disables the automatic reaction of the
choke. If an influx is in progress, it will still be detected and the operator
will be warned. However, the choke will take no action to stop the influx.
SD Software - Operational Modes
33. Mass Flow – Operator’s Panel
33
Gain and Loss
Density in /
Density out
Graphical flow matrix
Graphical Fluid
Density
34. Red color warnings indicate any abnormal situation, undesirable well or
equipment conditions and well control events such as kicks, losses, influx
circulation, kill mud circulation and reaching equipment operational
pressure limits.
Influx detected message while running secure in Auto Control ON
mode,
Loss detected message while Auto Control is OFF.
Automatic MPD System
