Trüetzschler Card Clothing (TCC) is one of the world's leading manufacturers of metallic and flexible wire clothing for cards with over 60 years of experience. TCC provides high quality metallic wires, flat tops, stationary flats, etc.
For more information visit www.ategroup.com
2. 2
Contents
▪ TCC – company profile
▪ Product range – an overview
▪ Product range
▪ Product innovations
▪ T-winder and ON card flat grinding device TC-FG
▪ Card room accessories
▪ TCC nomenclature and recommendation chart
3. 3
3
TCC – company profile
▪ TCC is a part of the Trützschler
group – one of the world's leading
manufacturers of blow rooms, high
production cards, draw frames and
combers
▪ With over 60 years of experience,
TCC is a world leader in the
manufacture of metallic and flexible
wire clothing for cards
4. 4
Product range – an overview
▪ Products made of high quality micro alloy steel of
high wear resistance and long life
▪ Products are manufactured using laser-assisted high
precision cutting technology that laves no burrs or
sharp edges
▪ Optimum nep reduction without loss in fibre length
▪ High economic efficiency through better raw material
utilisation
▪ Consistent performance with long life
▪ Maintenance-free cylinder wire (FGX1)
▪ Best combination of NRE% and universality (GX1)
6. 6
Metallic wires – features
Service interval
Neps
HCS-quality
t
Novostar Plus
Neps
t
▪ Metallic wires comb through fibres during
the process of carding, remove foreign
matter and short fibers from the material
and align the fibers in a more uniform
direction
▪ TCC metallic wires stand out on account
of their optimised tooth geometries, low
tolerances and high surface quality
▪ TCC uses high-quality, micro-alloyed
steels, which guarantee a long service life
and high economic efficiency
▪ Stringent quality checks guarantee a
reproducible and consistently high quality
metallic wire
7. 7
Metallic wires – hardening process
▪ During conventional hardening processes,
scales develop on the wire surface. These
scales must be mechanically removed by
an additional process. This, however, may
result in damage on the surface of the
wire
▪ TCC adopts a “scale-free” procedure
which prevents development of scales
during the production process
▪ Hardness testing is automated
10. 10
Metallic wires – quality control process
▪ TCC production lines are subjected to
permanent online monitoring throughout the
production process :
▪ Online measurement of profile height and
base width
▪ Offline measurement of profile
12. 12
Flat tops – manufacturing sequence
approx.
3 – 3.2mm
Rubber
Cotton fabric
▪ Flat tops mainly consist of the flats fabric and
metal hooks
▪ TCC uses a “multilayer foundation” in the
flats fabric construction with the covering
layer always consisting of permanently elastic
natural rubber
▪ A flats fabric consists of up to seven single
layers of rubber and cotton that are
constructed like a multilayer sandwich
▪ The wires used are made of micro-alloyed
steel, which are additionally hardened by
TCC
▪ Computer-optimised, biconvex wire cross-
sections and the special geometry of the tips
reduce wire movement during the carding
process
13. 13
Flat tops – manufacturing
Top
Precise grinding of flat tops
Heel
Side
14. 14
Flat tops – benefits of tip hardening
Before hardening
After hardening
Hardening of the tips = longer service life
15. 15
Flat tops – quality control
Measurement of pin geometry Measurement of pin height
Hardness test points
16. 16
Stationary flats
▪ Carding segments are used not only in
the pre- and post-carding zones of the
main cylinder, but also at the lickerin
rolls
▪ Stationary flats are available in different
varieties depending on card type and
material processed
▪ TCC uses a special procedure to obtain
maximum service life: instead of
grinding the wire tips off, TCC keeps
very narrow tolerances of the carding
segments through elaborate machining
of the wire carrier backs
19. 19
Cylinder Wire T17.40.040.0949.05/GX1
Raw material: 100% Cotton 100% Synthetics Blends Bleached Cotton Recycled
Application: Carded Combed Open End Airjet Nonwovens
✔
✔✔ ✔
• This is your wire
Customer
requirement :
Good universal
usability
• This is your wire
Customer
requirement :
NRE% (without
grinding)
• This is your wire
Customer
requirement :
Best combination of
NRE% and
universality
X1
GX1
FGX1
Choosing your cylinder wire
20. 20
Cylinder Wire T17.40.040.0949.05/GX1
Raw material: 100% Cotton 100% Synthetics Blends Bleached Cotton Recycled
Application: Carded Combed Open End Airjet Nonwovens
✔
✔✔ ✔
FGX1:
For
highest
nep
removal
Reduced running-in time
For high performance carding
X1:
For
universal
applications
GX1:
Combines the best
performances of
X1 and FGX1
GX 1
21. 21
Cylinder wire – FGX1 features
Standard profile
Cylinder wire- FGX1
▪ The cylinder wires of the FG series are a new
development. The most remarkable
characteristic of this wire is the straight tooth
back
▪ The tooth back keeps the fibres on the surface
and thus ensures an intensive interaction with
the flat tops. Feedback from spinning mills
confirms IPI values that are about 15% better
▪ The quality over longer periods of time is more
constant compared to conventional wires
▪ The long tooth back forms a robust carding
edge. Wear is considerably lower than with
filigree-shaped teeth
▪ In practice, re-sharpening of FG clothing is
eliminated, which means no maintenance
23. 23
23
Cylinder wire – FGX1 benefits
▪ Service life up to/more than 1,200 tons
▪ Maintenance free wire; no re-sharpening
required
▪ Improved yarn quality by reduction of neps
▪ Shorter running-in times
▪ Optimum nep reduction
600 tons: no re-sharpening
24. 24
Cylinder wire
Cylinder wire (1.7 mm height) for cotton applications
▪ Working height remains 0.5 mm
▪ Bottom foot height reduced
▪ Ease of mounting
▪ No negative influence on quality and
life
▪ Extensive field trials conducted in OEM
supplies
25. 25
MAGNOTOP
1. The MAGNOTOP flat system is the
result of an intensive cooperation
between Trützschler and TCC
2. The new Trützschler aluminium flat
bars are designed so that the card
clothing can be magnetically fixed by
extra-strong neodymium magnets
3. MAGNOTOP reduces the tolerances
between the single flat bars. This is
ensured by adhesive and
compensation layers on the flat bars
and on each individual clothing strip
4. Benefit: increased yarn quality
26. 26
26
Doffer wire – NovoDoff
▪ 100% scale-free surface for doffer wires;
prevents the accumulation of foreign particles as
well as fibre damage
▪ No mechanical brushing – no marks on surface
▪ Side grooves on the teeth ensure safe and
excellent web guiding, lowering the risk of
damage
▪ Longer service life
27. 27
27
TCC – T-winder and ON card flat grinding device TC-FG
▪ T-winder for all cards and all types of wire
▪ Easy assembly and flexibility
▪ Short downtimes
▪ Constant winding tension through special ceramic guide
▪ Permanent display of the actual winding tension
▪ TC-FG - easier and faster activation of flat clothing
▪ Provides precise grinding results
▪ Lightweight and simple to operate
▪ Ensures an optimal grinding setting
28. 28
28
TCC – card room accessories
Truetzschler Multi roller mounting machine
▪ Steady and robust design – German technology
▪ Easy to mount heavy beaters
▪ Compact design and precise accuracy with utmost safety
▪ Flexible base structure for different mounting
Truetzschler grinding machine TSG
▪ Flat grinding device for 1 m and 1.3 m card
▪ Grinding device for cylinder and doffer
▪ Emery sheet
30. 30
30
TCC – a complete range of service tools and accessories
▪ Clothings need regular checking and
maintenance
▪ TCC offers the complete flats workshop
equipment covering machines, tools, and
aids, right from special winding units to
setting gauges
31. 31
A.T.E. at a glanceBUSINESSAREAS
Textile Engineering Cooling and
Heating
Wastewater Treatment
Flow Technology
Intelligence of Things
Value-added
equipment for textiles,
packaging, etc.
OURTECHNOLOGIES
Textile Spinning
Internet of Things
for Industry
Heat Exchange
Wastewater Management
Static and Ink Control
Print Control and
Vision Systems
5000+ happy customers 500+ world-class products 11 locations
80+ years experience
32. 32
Contact us
A.T.E. Enterprises Private Limited
Bhagwati House, A-19 CTS No 689, Veera Desai Road,
Andheri (West), Mumbai 400053, India
Call: +91-22-6676 6100
Email: poacc@ateindia.com
Or visit us at: www.ategroup.com