VMC Technologies Quaser horizontal machining centers sales presentation. VMC represents Quaser's HMC in Michigan. Quaser's high quality horizontal machining centers are used to for face milling, end milling, drilling/tapping and rough machining.

1. representing Quaser Horizontal Machining Centers

2. YMT (Brea, CA) is the importer of Quaser
horizontal machining centers.

3. YMT’s parts room (Brea, CA) is stocked with parts and
accessories for Quaser machining centers.
Most parts can arrived next day if needed.

4. VMC Technologies is the
exclusive Michigan
sales representative for
Quaser machining centers.

5. VMC Technologies service dept. provides local service in
Michigan for Quaser machining centers.

6. Machining Applications: Horizontal Machining Centers
face milling end milling drilling tapping

7. Advantages: Horizontal Machining Centers
#3. greater spindle run
time since the machine
can run almost
continuously because it
never sits idle during
set up time
#1. chips fall away from the
cutting area
#2. accessibility to the next
work piece during machining

8. VALUE – HIGH PRECISION – QUALITY – EASE of USE - DESIGN
#5 Reasons
to consider Quaser horizontal machining centers?

9. #1.VALUE: Quaser horizontal machining centers were
originally developed for the Europe market where they
compete with high end
German machines. They
are very closely matched
or better than the German
made units, but at a
lower price.

10. #2.HIGH PRECISION: Quaser machines provide top notch
repeatable precision and accuracy. A lot of builders makes "muscle
machines" with ridiculous specs but lose the ability to maintain
needed accuracy. This maybe good for some markets
where they only need rough machining.
Quaser is aimed at the high precision
markets such as aerospace and medical.
They are trying to build machines that
are in the "Zen" balance between
performance and precision.

11. #3.QUALITY: Quaser spends most of its revenue on R&D techniques like
advanced CAD & Finite Analysis simulation software. All machines
machines are built in-house are subject to pass the toughest inspection
list and 48 hours continuous burn-in test before they are ready to ship
out.

12. #4.EASE of USE: We often get the remarks
"This is the easiest machine I ever operated.”

13. #5.DESIGN:
Quaser rigid
cast designs are
hand scrapped
and can
withstand any
machining
environment.

14. model HX504 HX505 HX635 HX805
X,Y,Z axis travel 30” x 25.2” x 31.5” 30” x 25.2” x 31.3” 39.4” x 31.5” 35.4”
47.2” x 39.4” x
39.4”
spindle speed 15,000 rpm 10,000 rpm 10,000 rpm 10,000 rpm
Horizontal Machining Centers
Request Info.

15. also produces the following types of
quality machining centers
vertical multi axis high speed multi pallet

16. 1788 Northwood Drive
Troy, MI 48084
www.vmctechnologies.com
info@vmctechnologies.com
call 248-786-3000