Presentation1.pptx
•Download as PPTX, PDF•
0 likes•4 views
A switch is an electrical component that can disconnect or connect a conducting path in a circuit, interrupting or diverting electric current. The most common type of switch is an electromechanical device with one or more sets of movable contacts connected to external circuits, allowing current to pass when contacts touch but not when they are separated.
Report
Share
Report
Share
Recommended
Pratical electricity
1) The document discusses the safe use of electricity in the home. It describes common electrical appliances like lighting, heating, and motors.
2) It outlines electrical hazards such as damaged insulation, overheating of cables, damp conditions, and carelessness that can cause electric shock.
3) The document provides guidance on safely using electricity through the use of fuses, circuit breakers, earthing of appliances, and double insulation to protect against electric shock.
Relay and Transducers
Relays are electromechanical switches that use an electromagnet to mechanically operate contacts to turn circuits on and off. They allow low-power circuits to control high-power circuits by using an electromagnet to attract a lever and change switch contacts. Relays come in many types for different applications and include latching, reed, mercury, polarized, machine tool, contactor, and solid state contactor relays. Transducers are devices that convert one form of energy to another and include different types of ultrasonic transducers like transom mount, dual element, delay line, contact, and immersion transducers used for various inspection applications.
Slide Presentation-Electrical Circuits.pptx
Electric circuits require a complete path for electricity to flow. The document discusses the key parts of electric circuits including switches, conductors, insulators, and different circuit types. It explains that electric current is the flow of electrons and can be modeled similarly to water flow. The document also covers series and parallel circuits, calculating current and resistance, and issues like short circuits.
3 phase switch
A 3 phase switch provides greater power density than a one-phase circuit at the same amperage, keeping wiring size and costs lower. In addition, switches are made to balance loads, minimizing harmonic currents and the need for large neutral wires.
Vskills certified it support professional reading material
Vskills IT Support Professional Sample reading material covers the following concepts.
1. Electronics basics
1.1 Electricity versus Electronics
1.2 Electricity Basics
1.3 Analog electronics
1.4 Digital electronics
Get complete e-book
http://www.vskills.in/certification/information-technology/certified-it-support-professional
Types of Circuit
There are several types of electric circuits:
- A closed circuit allows current to flow continuously through a loop without interruption. An open circuit breaks the continuity so that current cannot flow.
- In a series circuit, the current flows through components in a single path. A parallel circuit branches so the current divides between paths, while the voltage remains the same across each branch.
- A short circuit occurs when a low resistance path is created, allowing more current to flow than intended and potentially causing damage.
electrical accessories
The document discusses various electrical components used in control panels and distribution boards, including PVC channels, cable glands, terminal strips, bus bars, emergency stop buttons, switches, lamp holders, sockets, main switches, miniature circuit breakers, plugs, relays, isolators, wires and cables, and electric chokes. It provides brief descriptions of each component and their purposes in electrical systems.
Electrical Circuits
An electric circuit is formed with electrons that flow from a voltage source like a battery through a conductor like wire to a load and back to the source, completing the circuit. Key components include a power source, wires, and a load such as a light bulb. Circuits can be open or closed, with closed circuits allowing continuous current flow and open circuits interrupting flow. Circuit types include parallel, series, and series-parallel configurations.
Recommended
Pratical electricity
1) The document discusses the safe use of electricity in the home. It describes common electrical appliances like lighting, heating, and motors.
2) It outlines electrical hazards such as damaged insulation, overheating of cables, damp conditions, and carelessness that can cause electric shock.
3) The document provides guidance on safely using electricity through the use of fuses, circuit breakers, earthing of appliances, and double insulation to protect against electric shock.
Relay and Transducers
Relays are electromechanical switches that use an electromagnet to mechanically operate contacts to turn circuits on and off. They allow low-power circuits to control high-power circuits by using an electromagnet to attract a lever and change switch contacts. Relays come in many types for different applications and include latching, reed, mercury, polarized, machine tool, contactor, and solid state contactor relays. Transducers are devices that convert one form of energy to another and include different types of ultrasonic transducers like transom mount, dual element, delay line, contact, and immersion transducers used for various inspection applications.
Slide Presentation-Electrical Circuits.pptx
Electric circuits require a complete path for electricity to flow. The document discusses the key parts of electric circuits including switches, conductors, insulators, and different circuit types. It explains that electric current is the flow of electrons and can be modeled similarly to water flow. The document also covers series and parallel circuits, calculating current and resistance, and issues like short circuits.
3 phase switch
A 3 phase switch provides greater power density than a one-phase circuit at the same amperage, keeping wiring size and costs lower. In addition, switches are made to balance loads, minimizing harmonic currents and the need for large neutral wires.
Vskills certified it support professional reading material
Vskills IT Support Professional Sample reading material covers the following concepts.
1. Electronics basics
1.1 Electricity versus Electronics
1.2 Electricity Basics
1.3 Analog electronics
1.4 Digital electronics
Get complete e-book
http://www.vskills.in/certification/information-technology/certified-it-support-professional
Types of Circuit
There are several types of electric circuits:
- A closed circuit allows current to flow continuously through a loop without interruption. An open circuit breaks the continuity so that current cannot flow.
- In a series circuit, the current flows through components in a single path. A parallel circuit branches so the current divides between paths, while the voltage remains the same across each branch.
- A short circuit occurs when a low resistance path is created, allowing more current to flow than intended and potentially causing damage.
electrical accessories
The document discusses various electrical components used in control panels and distribution boards, including PVC channels, cable glands, terminal strips, bus bars, emergency stop buttons, switches, lamp holders, sockets, main switches, miniature circuit breakers, plugs, relays, isolators, wires and cables, and electric chokes. It provides brief descriptions of each component and their purposes in electrical systems.
Electrical Circuits
An electric circuit is formed with electrons that flow from a voltage source like a battery through a conductor like wire to a load and back to the source, completing the circuit. Key components include a power source, wires, and a load such as a light bulb. Circuits can be open or closed, with closed circuits allowing continuous current flow and open circuits interrupting flow. Circuit types include parallel, series, and series-parallel configurations.
electric relay
This document discusses electric relays. It begins by defining an electric relay as an automatic device that senses abnormal electric circuit conditions and closes its contacts. It then describes the basic components and operating principles of different types of relays, including electromagnetic, solid-state, and microprocessor-based relays. The document also covers relay applications, terminology, advantages, disadvantages, and concludes by emphasizing the importance of relays for safety and protection in electric systems.
Switchgear
Electrical switchgear is a generic term that includes all switching, protection, control, metering and regulating devices associated with an electrical power system. It performs functions like carrying and interrupting normal and fault currents, clearing faults, and metering/regulating system parameters. Switchgear is necessary at every switching point in a power system due to varying voltage levels and fault levels. Common types include circuit breakers, fuses, relays and transformers.
Electricity and basic components
This document provides an overview of basic electronics components. It defines electricity as involving large amounts of power, while electronics involves small amounts. Key properties that allow electronics to function are defined as voltage (the "push" that moves electrons), current (the flow of electrons), and resistance (the difficulty of electron flow). The basic electronic components that will be used are then listed as resistors, motors, LEDs, buzzers, potentiometers, LDRs, pushbuttons, and transistors. Resistors are described as limiting current, while transistors control current flow. Motors convert electricity to motion, LEDs to light, and buzzers to sound. Sensors like LDRs and potentiometers and input components like pushbuttons
ELECTRICAL.pptx
This document discusses electrical safety and provides an overview of basic electrical theory and components. It describes the hazards of electricity like shock and arc flash that can cause injury. Proper safety procedures like lockout/tagout and personal protective equipment are emphasized. The basics of electrical circuits, components like meters, and concepts such as voltage, current, resistance, and Ohm's Law are explained at a high level. Different types of circuits and how electricity flows through materials at an atomic level are also summarized.
Electrical circuit
An electrical circuit is a path through which electrical current can flow. It requires a power source, conductors to carry the current, and a load. There are two main types of circuits - series and parallel. A series circuit has one path for current to flow through components sequentially. A parallel circuit has multiple paths and components connected across the power source. Short circuits occur when there is no load and wires contact each other, allowing high voltage to flow directly back to the power source and cause overheating. Circuits are protected using fuses, circuit breakers, or thermal breakers to open the circuit if excess current flows.
How Electrical Switches Work?
How Electrical Switches Work?
Electrical switches work by controlling the flow of electric current in a circuit. They can either allow the current to pass through (closed position) or interrupt the flow of current (open position). The operation of an electrical switch depends on its design and type, but the basic principle is the same. Here's a general overview of how electrical switches work:
1. **Contact Mechanism**: At the core of an electrical switch are two or more metal contact points. These contacts are usually made of conductive materials like copper or silver.
2. **Actuator**: An actuator is a mechanism that the user can manipulate to change the state of the switch. This could be a lever, button, toggle, or any other physical control that is pressed, pushed, or moved.
Electric substation
This case study describes the key components of an electric transmission substation. It discusses transformers that change voltage levels, conductors that transmit electricity, insulators that prevent arcing, isolators for safety during maintenance, busbars for distributing power, lightning arresters for overvoltage protection, and circuit breakers for interrupting faults. The document provides details on the working principles and applications of these various substation equipment.
Electricity and circuits
The document discusses electricity and circuits. It explains that an electric bulb connected to an electric cell with wires will glow, forming a simple electric circuit. A torch uses a battery and bulb connected by a sliding switch - pushing the switch forward completes the circuit and lights the bulb, while pushing it back breaks the circuit and turns the bulb off. The document also defines conductors as materials that allow electric current to pass through, like metals, while insulators do not allow current and include materials like rubber and plastic.
Current Electricity Chp-8 General Science 9th 10th
Subject : General Science
Teacher: Mr Ehtisham Ul Haq
Class: BS EDUCATION
Semester: 2nd (Spring(2023-2027)
Date Of Starting Of Semester : 4 September 2023
Date Of End Of Semester : 20 January 2024
University Of Sargodha
Institute of Education
These are the presentation slides that we prepare by our own research and work!
Electrical circuit simple english wikipedia, the free encyclopedia
An electrical circuit is a path for electrons to flow from a power source and back in a closed loop. It requires a voltage or current source, a conductive path for electrons to flow, and electrical components like resistors or motors that consume power. Circuits can use alternating or direct current and power everything from small electronics to large appliances and power stations. Diagrams are used to represent circuits and their components and how they are connected. Safety devices like circuit breakers and ground fault interrupters protect circuits and users from overloads or electric shocks.
Current Electricity Chp-8 General Science 9th 10th
Subject : General Science
Teacher: Mr Ehtisham Ul Haq
Class: BS EDUCATION
Semester: 2nd (Spring(2023-2027)
Date Of Starting Of Semester : 4 September 2023
Date Of End Of Semester : 20 January 2024
University Of Sargodha
Institute of Education
These are the presentation slides that we prepare by our own research and work!
Relay
A relay is an electrically operated switch that uses electromagnets to mechanically operate contacts and can control one circuit using a separate low-power signal. Relays were initially used in telegraph circuits to amplify and repeat signals. A basic electromagnetic relay consists of a coil, iron core, movable armature, and contacts. Relays are used where signal or power isolation is needed, such as controlling high power circuits with low power signals.
Revision helper u8_bilingual
This document provides revision notes on basics of electricity. It discusses the key conditions needed for electricity to flow, including having a source of electrical energy like a dry cell and a closed circuit. It defines common electrical components like switches and describes how they work. It also explains concepts such as electric current, voltage, resistance, and how these can be measured using instruments like ammeters and voltmeters. Examples are given throughout to illustrate the concepts discussed.
Physics electric circuits
This document provides an introduction to electricity and electric circuits. It defines electric current and how it is measured using ammeters or multimeters. It describes the basic components of electric circuits including wires, batteries, bulbs, switches and how they are represented symbolically in diagrams. It distinguishes between open circuits, closed circuits, and short circuits, explaining that current only flows in a complete closed loop. Fuses and circuit breakers are discussed as safety devices used to prevent too much current in a circuit.
PPT ON 220KV GSS
This document provides an overview of a 220 KV substation presented by Mohit Kalal. It discusses key components of substations including transformers, instrument transformers, circuit breakers, lightning arresters, and other auxiliary equipment. It describes the purpose and functioning of power transformers, current transformers, potential transformers, circuit breakers, lightning arresters, capacitors, isolators, and earthing equipment. The presentation concludes by discussing the importance of substations for power transmission and the future career prospects for electrical engineers in maintaining and developing substation infrastructure.
switchyard-151103200304-lva1-app6891.pptx
The document summarizes the key electrical equipment found in a switchyard, including transformers, conductors, insulators, isolators, bus bars, lightning arresters, circuit breakers, relays, and capacitor banks. It provides details on the purpose and functioning of each component, such as how power transformers change voltage levels, how current transformers reduce amperage readings, and how circuit breakers and relays automatically disconnect faulty lines. The document also mentions that technological advancements like SCADA systems now allow remote monitoring and control of substations.
Switches
In electrical engineering, a switch is an electrical component that can "make" or "break" an electrical circuit, interrupting the currentor diverting it from one conductor to another.The mechanism of a switch removes or restores the conducting path in a circuit
when it is operated. It may be operated manually, for example, a light switch or a keyboard button, may be operated by a moving
object such as a door, or may be operated by some sensing element for pressure, temperature or flow. A switch will have one or more
sets of contacts, which may operate simultaneously, sequentially, or alternately. Switches in high-powered circuits must operate
rapidly to prevent destructive arcing, and may include special features to assist in rapidly interrupting a heavy current. Multiple forms
of actuators are used for operation by hand or to sense position, level, temperature or flow.Special types are used, for example, for control of machinery, to reverse electric motors, or to sense liquid level. Many specialized forms exist. A common use is control of
lighting, where multiple switches may be wired into one circuit to allow convenient control of light fixtures.
By analogy with the devices that select one or more possible paths for electric currents, devices that route information in a computer
network are also called "switches" - these are usually more complicated than simple electromechanical toggles or pushbutton devices, and operate without direct human interaction.
Lec 1 electronics, application & components
This document provides an overview of basic electronics. It defines electrical and electronic engineering, noting that electronic engineering deals with electronic devices that manipulate current and data. It describes direct and alternating current, and gives examples of how electronics is used for rectification, amplification, control, oscillation, converting light/electricity. Common passive components like resistors, capacitors, and inductors are described. Active components like diodes and transistors are also introduced.
Three phase shifter appliance
The document is a report on the design of a three phase shifter appliance. It includes chapters introducing the project and describing the need for automation in power systems. It lists the components used in the circuit diagram, including operational amplifiers, transistors, relays, zener diodes and other electrical components. The block diagram and circuit diagram are presented and key components like the comparator, zener diode, and p-n junction are described in detail.
Switchyard
This document provides an overview of the electrical equipment found in a switchyard at an NTPC power plant, including transformers, conductors, insulators, isolators, busbars, lightning arresters, circuit breakers, relays, and capacitor banks. It describes the purpose and basic functioning of each type of equipment, such as how transformers change voltage levels, current transformers reduce current readings, conductors transmit power, and relays and circuit breakers disconnect faulty circuits. The document also notes that new technologies like SCADA allow remote control and monitoring of substations.
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.More Related Content
Similar to Presentation1.pptx
electric relay
This document discusses electric relays. It begins by defining an electric relay as an automatic device that senses abnormal electric circuit conditions and closes its contacts. It then describes the basic components and operating principles of different types of relays, including electromagnetic, solid-state, and microprocessor-based relays. The document also covers relay applications, terminology, advantages, disadvantages, and concludes by emphasizing the importance of relays for safety and protection in electric systems.
Switchgear
Electrical switchgear is a generic term that includes all switching, protection, control, metering and regulating devices associated with an electrical power system. It performs functions like carrying and interrupting normal and fault currents, clearing faults, and metering/regulating system parameters. Switchgear is necessary at every switching point in a power system due to varying voltage levels and fault levels. Common types include circuit breakers, fuses, relays and transformers.
Electricity and basic components
This document provides an overview of basic electronics components. It defines electricity as involving large amounts of power, while electronics involves small amounts. Key properties that allow electronics to function are defined as voltage (the "push" that moves electrons), current (the flow of electrons), and resistance (the difficulty of electron flow). The basic electronic components that will be used are then listed as resistors, motors, LEDs, buzzers, potentiometers, LDRs, pushbuttons, and transistors. Resistors are described as limiting current, while transistors control current flow. Motors convert electricity to motion, LEDs to light, and buzzers to sound. Sensors like LDRs and potentiometers and input components like pushbuttons
ELECTRICAL.pptx
This document discusses electrical safety and provides an overview of basic electrical theory and components. It describes the hazards of electricity like shock and arc flash that can cause injury. Proper safety procedures like lockout/tagout and personal protective equipment are emphasized. The basics of electrical circuits, components like meters, and concepts such as voltage, current, resistance, and Ohm's Law are explained at a high level. Different types of circuits and how electricity flows through materials at an atomic level are also summarized.
Electrical circuit
An electrical circuit is a path through which electrical current can flow. It requires a power source, conductors to carry the current, and a load. There are two main types of circuits - series and parallel. A series circuit has one path for current to flow through components sequentially. A parallel circuit has multiple paths and components connected across the power source. Short circuits occur when there is no load and wires contact each other, allowing high voltage to flow directly back to the power source and cause overheating. Circuits are protected using fuses, circuit breakers, or thermal breakers to open the circuit if excess current flows.
How Electrical Switches Work?
How Electrical Switches Work?
Electrical switches work by controlling the flow of electric current in a circuit. They can either allow the current to pass through (closed position) or interrupt the flow of current (open position). The operation of an electrical switch depends on its design and type, but the basic principle is the same. Here's a general overview of how electrical switches work:
1. **Contact Mechanism**: At the core of an electrical switch are two or more metal contact points. These contacts are usually made of conductive materials like copper or silver.
2. **Actuator**: An actuator is a mechanism that the user can manipulate to change the state of the switch. This could be a lever, button, toggle, or any other physical control that is pressed, pushed, or moved.
Electric substation
This case study describes the key components of an electric transmission substation. It discusses transformers that change voltage levels, conductors that transmit electricity, insulators that prevent arcing, isolators for safety during maintenance, busbars for distributing power, lightning arresters for overvoltage protection, and circuit breakers for interrupting faults. The document provides details on the working principles and applications of these various substation equipment.
Electricity and circuits
The document discusses electricity and circuits. It explains that an electric bulb connected to an electric cell with wires will glow, forming a simple electric circuit. A torch uses a battery and bulb connected by a sliding switch - pushing the switch forward completes the circuit and lights the bulb, while pushing it back breaks the circuit and turns the bulb off. The document also defines conductors as materials that allow electric current to pass through, like metals, while insulators do not allow current and include materials like rubber and plastic.
Current Electricity Chp-8 General Science 9th 10th
Subject : General Science
Teacher: Mr Ehtisham Ul Haq
Class: BS EDUCATION
Semester: 2nd (Spring(2023-2027)
Date Of Starting Of Semester : 4 September 2023
Date Of End Of Semester : 20 January 2024
University Of Sargodha
Institute of Education
These are the presentation slides that we prepare by our own research and work!
Electrical circuit simple english wikipedia, the free encyclopedia
An electrical circuit is a path for electrons to flow from a power source and back in a closed loop. It requires a voltage or current source, a conductive path for electrons to flow, and electrical components like resistors or motors that consume power. Circuits can use alternating or direct current and power everything from small electronics to large appliances and power stations. Diagrams are used to represent circuits and their components and how they are connected. Safety devices like circuit breakers and ground fault interrupters protect circuits and users from overloads or electric shocks.
Current Electricity Chp-8 General Science 9th 10th
Subject : General Science
Teacher: Mr Ehtisham Ul Haq
Class: BS EDUCATION
Semester: 2nd (Spring(2023-2027)
Date Of Starting Of Semester : 4 September 2023
Date Of End Of Semester : 20 January 2024
University Of Sargodha
Institute of Education
These are the presentation slides that we prepare by our own research and work!
Relay
A relay is an electrically operated switch that uses electromagnets to mechanically operate contacts and can control one circuit using a separate low-power signal. Relays were initially used in telegraph circuits to amplify and repeat signals. A basic electromagnetic relay consists of a coil, iron core, movable armature, and contacts. Relays are used where signal or power isolation is needed, such as controlling high power circuits with low power signals.
Revision helper u8_bilingual
This document provides revision notes on basics of electricity. It discusses the key conditions needed for electricity to flow, including having a source of electrical energy like a dry cell and a closed circuit. It defines common electrical components like switches and describes how they work. It also explains concepts such as electric current, voltage, resistance, and how these can be measured using instruments like ammeters and voltmeters. Examples are given throughout to illustrate the concepts discussed.
Physics electric circuits
This document provides an introduction to electricity and electric circuits. It defines electric current and how it is measured using ammeters or multimeters. It describes the basic components of electric circuits including wires, batteries, bulbs, switches and how they are represented symbolically in diagrams. It distinguishes between open circuits, closed circuits, and short circuits, explaining that current only flows in a complete closed loop. Fuses and circuit breakers are discussed as safety devices used to prevent too much current in a circuit.
PPT ON 220KV GSS
This document provides an overview of a 220 KV substation presented by Mohit Kalal. It discusses key components of substations including transformers, instrument transformers, circuit breakers, lightning arresters, and other auxiliary equipment. It describes the purpose and functioning of power transformers, current transformers, potential transformers, circuit breakers, lightning arresters, capacitors, isolators, and earthing equipment. The presentation concludes by discussing the importance of substations for power transmission and the future career prospects for electrical engineers in maintaining and developing substation infrastructure.
switchyard-151103200304-lva1-app6891.pptx
The document summarizes the key electrical equipment found in a switchyard, including transformers, conductors, insulators, isolators, bus bars, lightning arresters, circuit breakers, relays, and capacitor banks. It provides details on the purpose and functioning of each component, such as how power transformers change voltage levels, how current transformers reduce amperage readings, and how circuit breakers and relays automatically disconnect faulty lines. The document also mentions that technological advancements like SCADA systems now allow remote monitoring and control of substations.
Switches
In electrical engineering, a switch is an electrical component that can "make" or "break" an electrical circuit, interrupting the currentor diverting it from one conductor to another.The mechanism of a switch removes or restores the conducting path in a circuit
when it is operated. It may be operated manually, for example, a light switch or a keyboard button, may be operated by a moving
object such as a door, or may be operated by some sensing element for pressure, temperature or flow. A switch will have one or more
sets of contacts, which may operate simultaneously, sequentially, or alternately. Switches in high-powered circuits must operate
rapidly to prevent destructive arcing, and may include special features to assist in rapidly interrupting a heavy current. Multiple forms
of actuators are used for operation by hand or to sense position, level, temperature or flow.Special types are used, for example, for control of machinery, to reverse electric motors, or to sense liquid level. Many specialized forms exist. A common use is control of
lighting, where multiple switches may be wired into one circuit to allow convenient control of light fixtures.
By analogy with the devices that select one or more possible paths for electric currents, devices that route information in a computer
network are also called "switches" - these are usually more complicated than simple electromechanical toggles or pushbutton devices, and operate without direct human interaction.
Lec 1 electronics, application & components
This document provides an overview of basic electronics. It defines electrical and electronic engineering, noting that electronic engineering deals with electronic devices that manipulate current and data. It describes direct and alternating current, and gives examples of how electronics is used for rectification, amplification, control, oscillation, converting light/electricity. Common passive components like resistors, capacitors, and inductors are described. Active components like diodes and transistors are also introduced.
Three phase shifter appliance
The document is a report on the design of a three phase shifter appliance. It includes chapters introducing the project and describing the need for automation in power systems. It lists the components used in the circuit diagram, including operational amplifiers, transistors, relays, zener diodes and other electrical components. The block diagram and circuit diagram are presented and key components like the comparator, zener diode, and p-n junction are described in detail.
Switchyard
This document provides an overview of the electrical equipment found in a switchyard at an NTPC power plant, including transformers, conductors, insulators, isolators, busbars, lightning arresters, circuit breakers, relays, and capacitor banks. It describes the purpose and basic functioning of each type of equipment, such as how transformers change voltage levels, current transformers reduce current readings, conductors transmit power, and relays and circuit breakers disconnect faulty circuits. The document also notes that new technologies like SCADA allow remote control and monitoring of substations.
Similar to Presentation1.pptx (20)
Current Electricity Chp-8 General Science 9th 10th
Current Electricity Chp-8 General Science 9th 10th
Electrical circuit simple english wikipedia, the free encyclopedia
Electrical circuit simple english wikipedia, the free encyclopedia
Current Electricity Chp-8 General Science 9th 10th
Current Electricity Chp-8 General Science 9th 10th
Recently uploaded
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS Template 2023-2024 by: Irene S. Rueco
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
DRUGS AND ITS classification slide share
Any substance (other than food) that is used to prevent, diagnose, treat, or relieve symptoms of a
disease or abnormal condition
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
Digital Artifact 1 - 10VCD Environments Unit
Digital Artifact 1 - 10VCD Environments Unit - NGV Pavilion Concept Design
CACJapan - GROUP Presentation 1- Wk 4.pdf
Macroeconomics- Movie Location
This will be used as part of your Personal Professional Portfolio once graded.
Objective:
Prepare a presentation or a paper using research, basic comparative analysis, data organization and application of economic information. You will make an informed assessment of an economic climate outside of the United States to accomplish an entertainment industry objective.
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdA Strategic Approach: GenAI in Education
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
Types of Herbal Cosmetics its standardization.
Physiology and chemistry of skin and pigmentation, hairs, scalp, lips and nail, Cleansing cream, Lotions, Face powders, Face packs, Lipsticks, Bath products, soaps and baby product,
Preparation and standardization of the following : Tonic, Bleaches, Dentifrices and Mouth washes & Tooth Pastes, Cosmetics for Nails.
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
Recently uploaded (20)
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
Presentation1.pptx
- 1. Switching Switches In electrical engineering, a switch is an electrical component that can disconnect or connect the conducting path in an electrical circuit, interrupting the electric current or diverting it from one conductor to another. The most common type of switches is an electromechanical device consisting of one or more sets of movable electrical contacts connected to external circuits. When a pair of contacts is touching, current can pass between them, while when the contacts are separated no current can flow. 1
- 2. Switching Switches In electrical engineering, a switch is an electrical component that can disconnect or connect the conducting path in an electrical circuit, interrupting the electric current or diverting it from one conductor to another. The most common type of switches is an electromechanical device consisting of one or more sets of movable electrical contacts connected to external circuits. When a pair of contacts is touching, current can pass between them, while when the contacts are separated no current can flow. 2
- 3. Switching Switches In electrical engineering, a switch is an electrical component that can disconnect or connect the conducting path in an electrical circuit, interrupting the electric current or diverting it from one conductor to another. The most common type of switches is an electromechanical device consisting of one or more sets of movable electrical contacts connected to external circuits. When a pair of contacts is touching, current can pass between them, while when the contacts are separated no current can flow. 3