Discuss the advantages and disadvantages of nesting the information .pdf

•

0 likes•4 views

Discuss the advantages and disadvantages of nesting the information security role within the information technology (IT) function of an organization. Note that in a small organization there may be no choice but to structure it this way. Doing it this way, a single person would be responsible for both roles. Solution Information security and information technology are correlated with each other. Nesting the role of information security inside the information technology function of an organization has several advantages and disadvantages which are listed below: Advantages- Disadvantages-.

Education

More from aksharatelicom

Discuss CLI commands you can use to document both the physical and l.pdf

aksharatelicom

Discuss and define creativity and the three component model of creativity. Solution Creativity is a skill of developing unique, new, or uncommon thing. This is a mental activity of finding solution to a problem differently. The three component model is as below: 1.Expertise: A person should have ability and knowledge to execute his/her creativity. 2.Creative thinking skills: A person must have talent of thinking creatively. 3.Motivational approach: The person must have motivation to do something interesting..

Discuss and define creativity and the three component model of creat.pdf

aksharatelicom

Directions: Answer each question completely and in detail. If the question has a minimum word count, it is likely because it is a complex subject that cannot be fully addressed in fewer words. Cite your sources with in-text citations and references. Turnitin score at or below 40%. 1. Research the Sarbanes-Oxley Act. Write a minimum of 250 words, cite your sources and completely address the following: Solution The act comprises of the following- It creates a central oversight board for registering auditors, defining the specific procedures for compliance audits, inspecting and policing conduct and quality control, and enforcing compliance of the specific mandates of SOX. Auditor Independence It establishes standards for external auditor independence, to limit conflicts of interest. It addresses new auditor approval requirements. Corporate Responsibility It mandates senior executives to take individual responsibility for the accuracy and completeness of corporate financial reports. It details the interaction of external auditors and corporate audit committees, and also specifies the responsibility of corporate officers for accuracy and validity of corporate financial reports. Enhanced Financial Disclosures It describes enhanced reporting requirements for financial transactions, off-balance-sheet transactions, pro-forma figures and stock transactions of corporate officers. Analyst Conflicts of Interest It includes measures designed to restore investor confidence in the reporting of securities analysts. Commission Resources and Authority It defines the conditions under which a person can be barred from practicing as a broker, advisor, or dealer. Studies and Reports Studies and reports show the effects of consolidation of public accounting firms, the role of credit rating agencies in operation of securities markets, securities violations, enforcement actions. Corporate and Criminal Fraud Accountability It describes the specific criminal penalties for manipulation, alteration of financial records or other interference with investigations..

Directions Answer each question completely and in detail. If the qu.pdf

aksharatelicom

Diophantus was a Greek mathematician who lived in the third century. He was one of the first mathematicians to use algebraic symbols. Most of what is known about Diophantus\'s life comes from an algebraic riddle from around the early sixth century. The riddle states: Diophantus\'s youth lasted one sixth of his life. He grew a beard after one twelfth more. After one seventh more of his life, he married. 5 years later, he and his wife had a son. The son lived exactly one half as long as his father, and Diophantus died four years after his son. How many years did Diophantus live? Solution The riddle, the \"facts\" of which may or may not be true, results in the following equation: x/6 + x/12 + x/7 + 5 + x/2 + 4 = x where x is Diophantus\'s age at the time of his death. Therefore, Diophantus lived exactly 84 years..

Diophantus was a Greek mathematician who lived in the third century..pdf

aksharatelicom

Digital data about cyber crimes in us or Saudi Arabia (Appropr.pdf

aksharatelicom

digital 3. Find currents (values and directions) in all resistors of the circuit given Slow. Find total electric power developing in this circuit. Neglect internal resistances of the batteries. Solution As all the Voltage sources are DC (Batteries) there by the capacitor acts as short circuit . I1 = Current through R1 =E1-E2)/R1 = (6-3)/5 = 3/5 Amps (direction from E1 to E2) I2= Current Throuh R3 = E2/R3 = 3/4 Amps (direction from Top to bottom) I3 = Current Through R2 = E3-E2)/R2 = (5-3)/5 = 2/5 Amps (direction from E3 to E2) Power delivered = (I1*E1) + (E3*I3) =(3/5)*6 + (2/5)*5 = 28/5 Watts.

digital 3. Find currents (values and directions) in all resistors of.pdf

aksharatelicom

Disposal of radioactive waste materials and spent fuel is a major and important technology. How the waste radioactive material is disposed off? Solution Nonusable fission products are radioactive and take short/medium/long time for radioactive decay to reach safe level of radioactivity. Accordingly three methods of disposal are : (a) Zero or low radioactivity material is dispersed or stored without elaborate shielding. (b ) Medium radioactivity material is stored for short duration of about 5 years to allow decay of radioactivity..

Disposal of radioactive waste materials and spent fuel is a major an.pdf

aksharatelicom

DISCUSSION QUESTIONS Chapter 9 1. The consequences of groupthink can be devastating. What can an organization do to avoid this type of behavior? 2. In what ways can culture affect a team? 3. Why does social loafing occur within groups? Chapter 10 4. What are some primary causes of conflict at work? 5. List three ways to decrease a conflict situation. What are some pros and cons of each of these approaches? 6. What are the negotiation phases and what goes on during each of them? Solution Chapter 9 1. Groupthink is one of the nefarious decision-making missteps of teams, and a trap that many smart people and groups have fallen victim to throughout history. Ways to avoid groupthink can be: To avoid groupthink, it is vital for the group leader to become a statesperson or conductor instead of a partisan virtuoso. Leadership almost always involves getting work done through others. 2. Working with people who do not share the same cultural values, viewpoints and backgrounds can be difficult and can severely affect work practices. Nowadays, More and more companies around the world define themselves as multicultural. It is not necessary that members of a team have to come from the same background, or share the same religion or political ideas to work effectively together. However, when personality or cultural clashes occur, you need to be able to solve the conflicts with little or no disruption to your business. However, one aspect that seriously affects teams is the combination of different cultural norms. What is considered appropriate in team behaviour often varies on whether, for example, an employee is coming from an individualist or collectivist-oriented culture. Another important influence on teams.

DISCUSSION QUESTIONSChapter 91. The consequences of groupthink c.pdf

aksharatelicom

Discussion about How will understanding Crystalline Structure affect material selection.write more as you can. please dont copy & paste, write in your own words. thank you Solution A crystal structure is a unique arrangement of atoms, ions or molecules in a crystallineliquid or solid. It describes a highly ordered structure, occurring due to the intrinsic nature of its constituents to form symmetric patterns. The crystal lattice can be thought of as an array of \'small boxes\' infinitely repeating in all three spatial directions. Such aunit cell is the smallest unit of volume that contains all of the structural and symmetry information to build-up the macroscopic structure of the lattice by translation. Patterns are located upon the points of a lattice, which is an array of points repeating periodically in three dimensions. The lengths of the edges of a unit cell and the angles between them are called the lattice parameters. The symmetry properties of the crystal are embodied in its space group. A crystal\'s structure and symmetry play a role in determining many of its physical properties, such as cleavage, electronic band structure, and optical transparency. Unit cell: The crystal structure of a material (the arrangement of atoms within a given type of crystal) can be described in terms of its unit cell. The unit cell is a small box containing one or more atoms arranged in 3-dimensions. The unit cells stacked in three-dimensional space describe the bulk arrangement of atoms of the crystal. The unit cell is represented in terms of its lattice parameters, which are the lengths of the cell edges (a,b and c) and the angles between them (alpha, beta and gamma), while the positions of the atoms inside the unit cell are described by the set of atomic positions (xi , yi , zi) measured from a lattice point. Commonly, atomic positions are represented in terms of fractional coordinates, relative to the unit cell lengths. Miller indices Planes with different Miller indices in cubic crystals Vectors and atomic planes in a crystal lattice can be described by a three-value Miller index notation (?mn). The ?, m, and ndirectional indices are separated by 90.

Discussion about How will understanding Crystalline Structure affect.pdf

aksharatelicom

discusses six different types of information systems. Pick one and discuss some examples of each Solution Following are the types of information system: Transaction processing system (TPS) This is an operational level system which uses transactions and events as inputs and update the existing data. It gives extensive reports to analyze the transactions and events of an organization. Examples of TPS is Accounts payable, Accounts receivables, etc..

discusses six different types of information systems. Pick one and d.pdf

aksharatelicom

Discuss what is meant by the closeout process and what elements do you think would apply to your project? Solution Discuss what is meant by the closeout process? The Project Closeout Phase is the last phase in the project lifecycle. Closeout begins when the user accepts the project deliverables and the project oversight authority concludes that the project has meet the goals established. The major focus of project closeout is administrative closure and logistics. Project closeout includes the following key elements:.

Discuss what is meant by the closeout process and what elements do y.pdf

aksharatelicom

Discuss very Clearly. Patent protection creates monopolies in software markets. Discuss the pros and cons of the government?s patent policy in this context. Solution Patent is a property right to the owner who has invented the product. This is absolutely true that the protection through patent creates monopolies in software business. Since invented software technology must not be copied by others, the inventor or owner enjoys monopoly privilege. Pros of government patent policy are given below: 1.It protects inventors or owners. Therefore, they can do business freely. The fear of stealing their invention is no more. 2.It encourages more invention. People would be interested of engaging with invention, since they have protection. Cons of government patent policy are given below: 1.It indirectly encourages monopoly culture. 2.Further invention could be hampered, since there is a fear of being copied..

Discuss very Clearly. Patent protection creates monopolies in softwa.pdf

aksharatelicom

DISCUSS two occasions when it would NOT be appropriate to assume tha.pdf

aksharatelicom

Discuss this concept In an economy without FIs, the level of fund.pdf

aksharatelicom

Discuss three ways that researchers can help maximize the integrity of data files for research clients. Solution Researchers can adopt the following ways to maximize the integrity of data: The researchers should maintain the confidentiality of data of their research clients. They should not present or publish the project findings of a research client to other people or general public. They should avoid plagiarism while conducting the research. It means they should not fully or partially copy the data already available on internet. They should complete the entre research work on their own. Furthermore, researchers should not perform any falsification or fabrication of data. Falsification of research materials, processes or findings might hamper the integrity of research work. It might bear sever consequences for the research clients..

Discuss three ways that researchers can help maximize the integrity .pdf

aksharatelicom

Discuss the WTO. Solution World Trade Organization (WTO) is an intergovernmental organization which regulates international trade. The WTO officially commenced on 1 January 1995 under the Marrakech Agreement, signed by 123 nations on 15 April 1994, replacing the General Agreement on Tariffs and Trade (GATT), which commenced in 1948.]The WTO deals with regulation of trade between participating countries by providing a framework for negotiating trade agreements and a dispute resolution process aimed at enforcing participants\' adherence to WTO agreements, which are signed by representatives of member governments and ratified by their parliaments. Most of the issues that the WTO focuses on derive from previous trade negotiations, especially from the Uruguay Round (1986.

Discuss the WTO.SolutionWorld Trade Organization (WTO) is an i.pdf

aksharatelicom

Discuss the role of geographic mobility in decreasing or increasing the dispersion of earnings. Solution Ans;Geographic mobility means reallocation of economic resources.It occurs when production of goods in one geographical area moved to other geographical area depending on the ease with which resources can reallocate and when production location shifts,population migrate.thus,it is the measure how population move overtime.Migration of people from their native country to another may cause settled people to move out which can decrease the earnings of those currently working there becase sometimes migrated people are to work at low earnings..Migration from large cities have devasting effect such as job shortages occur.causing buisnesses to fold due to loss of customers. There are several factors influencing geographic mobility depending on those factors it can increase or the dispersion of earnings.suppose if the migration is done for work then it allows migrants to develop their knowledge and skills and learn new techniques it will positive effect on their earnings.

Discuss the role of geographic mobility in decreasing or increasing .pdf

aksharatelicom

Discuss the types of companies’ resources. Solution Types of companies’ resources Physical - Physical assets such as Buildings, Plant and Equipment, Furniture and Manufacturing Facilities. Human - Some co need knowledge intensive human resource whereas some need Labour Intensive. Intellectual - Intellectual Brands such as brands , proprietory knowledge. Financial - Financial such as Cash, lines of credit or stock option..

Discuss the types of companies’ resources.SolutionTypes of com.pdf

aksharatelicom

Discuss the ways employers lose NLRB elections. Describe how the acronym T.I.P.S. can assist supervisors in remembering what not to do during campaigns. Your response must be at least 200-400 words in length per question. You are required to use at least your textbook as source material for your response. All sources used, including the textbook, must be referenced; paraphrased and quoted material must have accompanying citations. All references and citations used must be in APA style. BE ACCURATE! Solution How to Lose an NLRB Election.

Discuss the ways employers lose NLRB elections. Describe how the acr.pdf

aksharatelicom

Discuss the strengths and weaknesses of correlational and regression studies; discuss concepts such as positive and negative correlations, correlation coefficients, confounding, and causality. Solution M. Ed (1 st ) SESSION: 2011-2012 DEPARTMENT OF EDUCATIONAL TRAINING Nature of Correlational Studies Types of Correlations Positive and negative Correlation: A positive correlation means high scores on the one variablehave a propensity to be associated with high scores on other variable. A negative correlationmeans high score on the one variable is related with low scores on the other variable and lowscores on the one are associated with high scores on the either.Linear and Non Linear Correlation: The correlation between two variables is believed to belinear if be consistent to a unit change in one variable, there is constant change in other variableover entire array of values. The relationship between two variables is thought to be non-linear if corresponding to a unit change in first variable, but the other variable does not change at aconstant rate, but at varying rate. Types of Correlational Designs There are many methods for correlational studies with their own strengths and weaknesses. Onetrendy method is called naturalistic observation, which necessitates a researcher to observe andrecord the natural environment without interference. One benefit of naturalistic observation isthat the researcher is observing variables in a natural state. Some limitations are that it can bedifficult to control the variables or to avoid outside influences from faking the results.Another type of correlational research is called the survey method. Surveys are easy on the pocket and swift, and can be used to gather information from very large sample size. However, poorly written survey questions can distort results. Another hitch is that survey results are alsodependent on survey respondents, who are not always trustworthy.A third method for correlational design is archival research, which analyzes historical records.An improvement in this method is that it’s a workable way to analyze large amounts of datawithout expending a lot of money. A lapse of this particular research method is that theresearcher has no way of knowing if the original data collection methods were reliable.Correlational studies are a helpful tool for conducting research. However, it must be kept in mindthat no study method is perfect. Researchers must take into consideration the limitations of boththeir preferred research method and correlational studies as a general rule.Correlational designs may be cross-sectional, in which all observations are made at the same point with context to time, or they may be longitudinal, in which calculations are made at two or more different time points.

Discuss the strengths and weaknesses of correlational and regression.pdf

aksharatelicom

More from aksharatelicom (20)