SUMMER TRAINING BTECH 3RD YEAR

1. SUMMER TRAINING
AT
UMC GROUP
Pantnagar sidcul,uttrakhand(263153)
SUBMITTED TO:
Mr. PRADEEP BARTHWAL
SIR(H.O.D ME)
SUBMITTED BY:
AKASH SARASWAT
ROLL NO. 1328040007

2. CONTENT
S
1. COMPANY CHRONOLOGY
2. COMPANY PROFILE
3. QUALITY POLICY
4. CLIENTS
5. RANGE OF PRODUCTS
6. MATERIAL USED
7. PROCEDURE AND PROCESS
8. HEAT TREATMENT
9. CASE HARDENING
10. CRACK DETECTION TEST(MPI UNIT)

3. COMPANY CHRONOLOGY
 UNITCO AUTOMOTIVE PARTS
IN 1951 started as union trading company as a trading
house for suspension components.
 UMC GROUP
In 1958 established first manufacturing unit i.e, Union
Manufacturing Company for multi leaf spring and U-Bolts.
 BIDCO
In 1975 separated U-Bolts manufacturing in to new unit
unique suspension Pvt. Ltd.
 UTECH PRECISION AUTO COMPONENTS
IN 2005 setup a state of the art manufacturing unit Ultra
Tech Suspension Pvt. Ltd. For all kinds of Precision turned
components and U-Bolt. This unit is situated at Pune which
is the automotive manufacturing hub in the state of
Maharashtra INDIA and another unit is setup in Pantnagar
Sidcul in the Year 2007.

4. COMPANY PROFILE
IN THE YEAR 1951,Mr.KESER SINGH
KHOLI FOUNDED THAT GROUP AT PUNE
MAHARASTRA,INDIA.
AND ITS ANOTHER UNIT WAS SETUP IN
2007 AT PANTNAGAR,UTTRAKHAND.
OVER 700 EMPLOYEE’S ARE WORKING IN
THIS GROUP.
MANUFACTURING AUTO COMPONENTS
ARE SHACKLE PIN,KING PIN,SPRING
SHAFT,U BOLTS,SPRING PIN,S/A MTG PIN.
YEARLY TURNOVER OF THIS GROUP IS
ABOUT 30Cr.

5. QUALITY POLICY
 At UTSPL they were committed to
achieve customer satisfaction by
manufacturing of suspension
quality products as per customer
requirements.
They believe in continual
improvement in all their activites
by complying with the
requirements of quality
management system.
They are maintaining the quality
management system through
active participation of all the
member of organization.

6. CLIENTS
 TATA
 ASHOK LEYLAND
 MAHINDRA and MAHINDRA
 BHARAT BENZ
 AMW
 FORCE
 EICHER-VOLVO and Various Exports
Customers.

7. Range of Products
Manufacturing Heavy Vehicle Suspension Products.
U-BOLTS KING PIN SHACKLE PIN
SPRING PIN S/A MTG PIN SPRING SHAFT

8. MATERIAL USED
 FOR PINS
40Cr4
45C8
CK45
 FOR U-BOLTS & SPRING SHAFTS
27C15
EN8
SAE15B14

9. PARTING/
CUTTING
TURNING MILLING BENDING THEADING TAPING DRILLING FORGING
HEAT
TREATMENT
CASE
HARDENING
RAW
MATERIAL/
ROUND BAR
GRINDING
CRACK DETECTION
MPI UNIT
PAINTING/
COATING
FINAL INSPECTION
BEFORE DISPATCH
PROCEDURE AND PROCESS

10. HEAT TREATMENT
WASHING
PRE-HEATING
HEATING
QUENCHING
WASHING
TEMPERING

11. CASE HARDENING
 CASE HARDENING OR
INDUCTION
HARDENING IS A
PROCESS OF HEAT
TREATMENT IN WHICH
A PARTICULAR PART
OF JOB IS TO
HARDENEND MORE BY
PASSING HIGH
ELECTRICITY BY COILS
UPTO 500-850 DEGREE
CENTIGRADE.

12. CRACK DETECTION TEST(MPI
UNIT)
 IN THIS PROCESS,A JOB
IS PLACED IN CLAMP AND
THEN MAGNETIC FIELD IS
PASSES OVER IT AND
AFTER4-5SEC. IT’LL PUT
OFF AND THEN MAGNA
FLUX POWER IS SPRAYED
BY THAT CRACKS FOUND.
 IF NO CRACKS FOUND IN
JOB,THEN THE JOB
PASSES FROM
DEMAGNETISIER WHICH
NEUTRALISE THE JOB
AND THE IT PASSES TO
OTHER REQUIERD
PROCESS.

13. THANK YOU