woodwork estimation

1. Woodwork
ANALYSIS OF PRICES II

2. Output Labour for fixing timber frame
ITEM
1 carpenter to cut & fix timber frame accordance to cross section area
Nail (kg)
<5000mm2
(Hour/m)
5000mm2 –
7500 mm2
(Hour/m)
7500mm2 –
10 000mm2
(Hour/m)
10 000mm2 – 12
500mm2
(Hour/m)
Wall plate &
timber ground
0.05 0.06 0.08 0.1 0.2
Ceiling joist &
floor joist
0.07 0.09 0.11 0.12 0.2
Other roof
member
0.08 0.1 0.12 0.13 0.2

3. Wall plate
• Material
• Timber
• Wastage & laps (10%)
• Nail
• Labour
• Profit % overhead
• *cross sectional of timber need to be determined to get the labour
output = a x b
a
b

5. Roof rafter
• Material
• Timber
• Wastage & laps (10%)
• Nail
• Labour
• Profit % overhead
• *cross sectional of timber need to be determined to get the labour
output = a x b
a
b

7. Floor Joist
• Material
• Timber
• Wastage & laps (10%)
• Nail
• Labour
• Profit % overhead
• *cross sectional of timber need to be determined to get the labour
output = a x b
a
b

9. Labour for forming wrot timber
Labour for forming wrot timber surface 300mm girth
• Labour Cost
• Area to be plane 0.3 x 1.00 m (long)
• Profit % overhead
• *cross sectional of timber need to be determined to get the labour
output = a x b

11. Timber ground for door frame
• Material
• Timber
• Wastage (5%)
• Fixing clamp
• Labour
• Profit % overhead
• *cross sectional of timber need to be determined to get the labour
output = a x b
a
b

13. TIMBER BOARD FIXED AT TOUNGED & GROOVED
Board width
(mm)
Board
length (m)
50mm nail (Kg) Joiner (hour/ m)
75 15.87 0.6 0.7
100 11.36 0.55 0.65
125 8.85 0.5 0.6
150 7.24 0.45 0.55
175 6.13 0.4 0.5
200 5.32 0.35 0.45
Board width
(mm)
Board length
(m)
50mm nail
(Kg)
Carpenter (hour/
m)
75 13.33 0.6 0.65
100 10 0.55 0.6
125 8 0.5 0.55
150 6.67 0.45 0.5
175 5.71 0.4 0.45
200 5 0.35 0.4
TIMBER BOARD FIXED AT BUTT JOINT

14. Floor Board

15. Fascia & Eaves Board
• fascia is a wide band of material covering
the ends of roof rafters, sometimes
supporting a gutter in steep-slope roofing,
but typically it is a border or trim in low-
slope roofing while eaves is the underside
of a roof that extends beyond the external
walls of a building.

16. Skirting , Architrave and beading

18. Door and Windows Frame

20. Door Leaves

22. Hinges & Mortice Lockset