1. ABBAS ASSI
Tel : (+961) 70.991.286
Email : abbas.assi89@Gmail.com
Education
2013 Engineering Diploma at UTBM, faculty of Electrical and Control Systems Engineering, branch: energy
and environment.
2010 University Diploma of technology (Bac +3) in industrial engineering and maintenance, Lebanese
university, IUT, SAIDA
2007 Baccalaureate section General Sciences, Hassan kamel al Sabbah, Nabatieh, Lebanon.
PROFESSIONAL EXPERIENCE
2013 till now
2013
4 months
Electrical engineer with BETABAT at Algorithm Factory Zikrit (Lebanon)
§Electrical engineer:
* Shop Drawings & As Built Drawings.
* Supervision
* Supply and install :
- Earthing and lightning
Electrical engineer with BETABAT at Apostolique Nunciature of Harissa (Lebanon)
§Electrical engineer:
* Shop Drawings & As Built Drawings.
* Supervision, Testing & Commissioning.
* Supply and install : - Emergency power plant 450 KVA capacity,
- UPS 40 KVA,
- The control and power of VRF system,
- The control and power of Boilers, and the Solar Collectors,
- Fire-fighting and fire-alarm,
- Wifi in all the NAH
- Electrical panels
- Earthing and lightning
- Landscaping
- Music System
Electrical engineer with BETABAT at Nicolas Sursock Museum (Lebanon)
§BMS supervisor.
§Assistant of the operator and maintenance manager.
§Electrical engineer:
* Shop Drawings & As Built Drawings.
* Supervision, Testing & Commissioning.
* Supply and install :
- UPS 60 KVA
- the latest technology in humidity control (AUH, FCU, EAF, FAF and PU),
- Access control, CCTV, anti-intrusion devices,
- Wifi in all the NSM
- GSM in the basement of NSM.
- Electrical panels
- EIB System
Senior project at UTBM (90) (France)
§ Detecting a short circuit between the inter turn of permanent magnet synchronous machine.
§ Vector control (PMSM).
Electrical and control systems
engineering

2. 2012-2013
6 months
Senior project/ ERDF-GRDF/ Paris
§ Management and monitoring of the deployment of an embedded computer system.
§ Development of many databases allowing the monitoring and the management of individual and
collectif material.
§ Find and repair default in low voltage/high voltage.
§ Management in site, form and programming.
2011-2012 Project at UTBM (90)(France)
6 months § Project leader of diagnostic wind turbine.
§ Determine the fault.
§ Make a program that determines the faults.
2010-2011 Electrical engineer internship – Johnson Controls(70)(France)
6 months § Decrease the electrical energy consumption of the site.
§ Comparative measure of the tools and equipment.
§ Changing of various obsolete tools.
§ Changing of EDF contract.
§ Upgrading to the reduction of consumptions.
§ Changing of lighting system.
2009-2010 Senior project - KAOOK Company – Zahrani (LEBANON)
4 months § Design and automation of winding machine for electrical motors.
2008-2009 Training technician Hassan Hussein – Dair el-Zahrani (LEBANON)
4 months § Manufacturing of thermal solar panel.
§ Engine alternator assembly, and electrical board.
Technical Skills:
Techniques Electrical circuits: Architectures and performance of various electrical circuits of transportation and
distribution ( circuits, synchronous machine, transformer, protections).
Energy management: Energy resources/ optimization, reducing costs and improving energy efficiency/
Optimal process control and energy management.
Renewable energy: energy balance and global resources/ wind power, photovoltaic, hydraulic, fuel cell
and hydrogen, insulation part and energy management.
Means of production electrical energy: steam turbines, gas turbines, combined cycle, diesel groups,
hydraulic turbines, wind, alternators: synchronous machines and machines, photovoltaic cells.
Transport and distribution of electrical energy: Circuits HV, MV and LV, transformers, LV switchgear
(breakers, arresters, disconnectors, shifts…), appropriate standards…
Electrical installation LV: LV switchgear (protection against the electrical choc, overvoltage category,
choice of conductor sections, protection of persons, earthing, neutral system.
Conversion of electrical energy ( basic concept ): the static converters ( rectifiers, inverters…)
Concepts in project management
Training in health and safety at work
Data processing Advanced rapid prototyping tolls : dSpace, Matlab Simulink,
Data acquisition tools : LabView, ControlDesk,Proteus
Design : Microsoft VISIO, autoCAD
Programming : C, Assembler, TAMARIS, webGDO,VHDL
Office : MS Office (Word, Excel, Access, PowerPoint)
Languages Arabic : mother language English : Advanced
French :Fluent Chinese : Beginner
LOISIRS
Sports Karate (Sports association), Handball (School tournaments), swimming, fishing and tennis (Summer
activities).