SlideShare a Scribd company logo
1 of 6
Page 1
BALASUBRAMANIAN SUDALAIYANDI
Email: sbsm1985@gmail.com
Mobile: UAE: +971-501567803,INDIA: +91-7639795919
POST APPLIED FOR ELECTRICAL TECHNICIAN
Carrier Objective:
8 Years’ experience in dynamic and challenging position in the field of Oil & Gas and Petrochemical
plants as an Electrical Operation,Commissioning & Maintenance in a reputed organization to enhance my
interpersonal skills and also use my knowledge at the best. Apart from the above, analyzing and solving
critical problems in day by day work and interact with people of all professions with technical
backgrounds.
Key Area of Experience:
 In-depth knowledge of electrical erection, commissioning, start up,operation and maintenance activity of Oil,
Gas and Petrochemical field, Substations and control room Equipments and distribution.
 Good knowledge in Maintenance activities of HV/LV Transformers, HV/LV Motors, HT/LV
Switchgears, UPS systems, VFD panels,Diesel generator,HVAC,Electrical Heat Tracings and Plant
lighting network.
 Maintenance job Organization, plan, monitoring, general guidance & work direction to electrical
team with safety procedure & formats. And completion of Maintenance activities as per planned
time.
 Substation Operation and Monitoring all Electrical Lockout-Tag out (LOTO), isolation and de-
isolation activities in safe way.
 Locate equipment or systems faults and operating irregularities by making the necessary
diagnostically tests, measurements, Fault analyses, troubleshooting and good communication skills.
 Preventive maintenance of Electrical equipment for hazardous and non-hazardous area classifications.
 Conduct Tool box talk before start job regarding day By Day activities & plant emergenc y escape
route.
 Conversant with the principles, practices and testing tools used in electrical operation & maintenance
 Carried out under the permit to work (PTW) system in Offshore Oil & Gas industry.
 Comprehensive knowledge of new additional system/equipment installation with existing system,
modification and related requirement preparation, scheme modification, protection and As-Built procedure.
 Conversant with planning and completion maintenance activities as per planned time.
 Lead and assure that on-site electrical activities including resource management, procedure development,
schedule coordination, materials / tools / vendor support, system/equipment troubleshooting, and adjusting
plan due to resource issues for a safe and efficient execution.
 Plant and substation related all electrical equipments fault, irregular shutdown, parts failure and abnormality
trouble shooting and attending the faults with in accepted time limit.
Employment History:
1.Present Employer:Abudhabi Gas Development Company,[ALHOSN GAS],Abudhabi.
Position : Electrical Maintenance Technician (Onshore)
Period : March 2015- Present
Plant : Shah Gas Plant,Shah site.
Job Responsibility:
 Responsible for Operation, maintenance and trouble shooting of all switchgear, transformer (power and
distribution), HV/MV motors.
 Maintenance of Up to 132/33KV,33/11KV ,11/0.415 KV switching system and associated transformer,
protection relay, MCC, Lighting controls, Circuit breaker and related distribution system.
 Operation and Maintenance of HV/ LV power and Distribution transformers up to 33 KV, 40 MVA.
Page 2
 Maintenance of Numerical relays (SIEMENS, ABB).
 Operation, Testing & Maintenance of Electrical circuit Breakers like VCB, ACB and SF6 and
Vacuum Contactor like insulation resistance, Contact resistance and breaker timing test .
 Maintenance of HV and LV motors (UP to 12.5MW) including auxiliary pump motor at site.
 Maintenance of MOV with the help of Instrument Personnel.
 Maintenance of VFD drive panel as per manufacturer check list.
 Maintenance of UPS and related Battery banks with vendor.
 Maintenance and troubleshooting of Electrical Heat Tracing systems.
 Prepare and monitoring the daily work schedule and Activities.
 Maintain the Substation log book to communicate the day to day activities to superiors.
 Prepare and submit the Maintenance activities check list and substation Monitoring check list.
 Operation and Monitoring Substation Electrical equipment and follows the Lockout & Tag out
procedure for Isolation & De Isolation activities in safe way.
 Carrying out low and high voltage preventive maintenances of electrical equipments for hazardous and non-
hazardous area.
2.Previous Employer: Abudhabi Polymers Company,[BOROUGE],Abudhabi.
Position : Electrical Maintenance Technician (Onshore)
Period : August 2013-August 2014
Plant : Borouge 1 & 2,Ruwais.
Job Responsibility:
 Responsible for Operation, maintenance and trouble shooting of all switchgear, transformer (power and
distribution), HV/MV motors.
 Maintenance of Up to 132/33KV,33/11KV ,11/3.3 KV,11/0.415 KV switching system and associated
transformer, protection relay, MCC, Lighting controls, Circuit breaker and related distribution system.
 Operation and Maintenance of HV/ LV power and Distribution transformers up to 33 KV, 40 MVA.
 Operation & Maintenance of HV/LV Switch gear related Bus Duct.
 Maintenance of Numerical relays (SIEMENs, ABB, Schneider and Areva MICOM series).
 Operation, Testing & Maintenance of Electrical circuit Breakers like VCB, ACB and SF6 and
Vacuum Contactor like insulation resistance, Contact resistance and breaker timing test.
 Maintenance of HV and LV motors (UP to 12.5MW) including auxiliary pump motor at site.
 Maintenance No load test run of Diesel Generator up to 1600 kVA for emergency power source.
 Maintenance of VFD drive panel as per manufacturer check list.
 Maintenance and Commissioning of UPS and related Battery banks with vendor.
 Maintenance of Plant Normal and Emergency Lighting networks.
 Maintenance and troubleshooting of Electrical Heat Tracing systems.
 Maintenance of 220 VAC power socket and 415 VAC welding socket.
 Prepare and monitoring the daily work schedule and Activities.
 Maintain the Substation log book to communicate the day to day activities to superiors.
 Prepare and submit the Maintenance activities check list and substation Monitoring check list.
 Arranging temporary lighting system for Process and Mechanical jobs.
 Operation and Monitoring Substation Electrical equipment and follows the Lockout & Tag out
procedure for Isolation & De Isolation activities in safe way.
 Operation, Monitoring & Fault analysis of Substation Electrical equipment through IPCS
(Integrated Protection & control System.
 Maintenance & functional testing of Bridge crane and Hoist trolley up to 50 Ton.
 Maintenance of both HV and LV Capacitor banks.
 Carrying out low and high voltage preventive maintenances of electrical equipments for hazardous and non-
hazardous area.
Page 3
3.Previous Employer : QATAR SHELL GTL,Qatar.
Position : Electrical Technician- Commissioning,Operation and Maintenance(Onshore)
Period : February 2011-April 2013
Plant : Pearl GTL,Ras Laffan.
Job Responsibility:
 Responsible for Commissioning, operation, maintenance and trouble shooting of all switchgear, transformer
upto 30MVA(power and distribution), HV/MV motors (Up to 4MW).
 Maintenance of Up to 33/6.6KV, 33/11KV,6.6/0.690KV switching system and associated transformer,
protection relay, MCC, Lighting controls, Circuit breaker and related distribution system.
 Testing & Commissioning and Maintenance of HV switch gear of 33KV,11KV, 6.6KV,3.3KV,0.690KV
with including different type of Numerical Relays, Auxiliary equipment CT and PT.
 Commissioning and Maintenance of the ACB, VCB, Vacuum Contactors,Isolator,MCCB and HVAC
systems.
 Commissioning & Maintenance of AC & DC UPS systems, related Battery bank and Battery charger.
 Maintenance and Commissioning of HV/LV Motor up to 4 MW and Auxiliary lube oil systems and
Preparation of Maintenance check list as per standard and vendor recommendation.
 Commissioning of IRP panel (Interposing relay panel).
 Coordinate with operation process team while commissioning and start up the process plant.
 High voltage test for power cables, HV bus bars and HV Bus ducts.
 Preparation of schedule for electrical system commissioning (Format wise) & executing as per plan.
 Preparation of final as built drawing at site and coordinates with engineering department personnel.
 Installation and Maintenance of all Oil & Gas plant Electrical Equipment’s as per the hazardous area
classification and requirements.
 Ability to read and understand all type of electrical drawings. Trouble shooting and repair and Maintain
Electrical Equipment’s, Site Supervision of Plant Construction and commissioning activities.
 Light fitting installation, Maintenance and Trouble shooting of Industrial Lighting panels, Emergency lighting
panel ,DC critical lighting and Electrical Heat Tracing systems.
 Commissioning of Electrical motor including No load test run as per client requirement.
 Receive LOA,SFT,EPTW for HV electrical equipments from SAEP.
 Responsible for HV/MV Motor solo run activity, commissioning operation and associated loop checking,
protection system.
 Maintenance and troubleshooting of 30 Ton EOT Crane.
 Maintenance and trouble shooting of VSD microprocessor based AC thyristor drives.
 Maintenance of Gas Turbine Generator up to 25 MVA with related auxillary equipments.
 Preventive maintenance of Earthing and Cathodic Protection Transformers.
 Maintenance of MOV with the help of Instrument Personnel.
 Handle the tasks of generating plans for upgrading operation & maintenance and in documenting work
policies.
 Provide instructions in areas of testing and commissioning electrical equipment to the co-workers.
4. Previous Employer : Petrochemical Industries Company,Kuwait.
Position : Electrician-Maintenance(Onshore)
Period : August 2008-November 2010
Plant : PIC ,Shuaiba,Kuwait.
Job Responsibility:
 Responsible for Operation, maintenance and trouble shooting of all switchgear, transformer (power and
distribution), HV/MV motors.
 Maintenance of Up to 33KV,33/11KV ,11/3.3 KV,11/0.415 KV switching system and associated
transformer, protection relay, MCC, Lighting controls, Circuit breaker and related distribution system.
Page 4
 Operation & Maintenance of HV/LV Switch gear related Bus Duct.
 Operation, Testing & Maintenance of Electrical circuit Breakers like VCB, ACB and SF6 and
Vacuum Contactor like insulation resistance, Contact resistance and breaker timing test .
 Maintenance of HV and LV motors (UP to 4MW) including auxiliary pump motor at site.
 Maintenance No load test run of Diesel Generator up to 1600 kVA for emergency power source.
 Maintenance of VFD drive panel as per manufacturer check list.
 Maintenance and Commissioning of UPS and related Battery banks with vendor.
 Maintenance of Plant Normal and Emergency Lighting networks.
 Prepare and monitoring the daily work schedule and Activities.
 Maintain the Substation log book to communicate the day to day activities to superiors.
 Operation and Monitoring Substation Electrical equipment and follows the Lockout & Tag out
procedure for Isolation & De Isolation activities in safe way.
 Maintenance & functional testing of Bridge crane and Hoist trolley up to 50 Ton.
 Conversant for shut down activities, Inspection, utilizing of spares for electrical projects.
5. Previous Employer : Kuwait Oil Company,Kuwait.
Position : Electrician-Maintenance(Onshore)
Period : November 2007-March 2008
Plant : BS-131,Abdaly,Kuwait.
Job Responsibility:
 Maintenance of 33/11KV ,11/3.3 KV,11/0.415 KV switching system and associated transformer,
protection relay, MCC, Lighting controls, Circuit breaker and related distribution system.
 Operation, Testing & Maintenance of Electrical circuit Breakers like VCB, ACB and SF6 and
Vacuum Contactor like insulation resistance, Contact resistance and breaker timing test.
 Maintenance of HV and LV motors (UP to 4MW) including auxiliary pump motor at site.
 Maintenance of VFD drive panel as per manufacturer check list.
 Maintenance and Commissioning of UPS and related Battery banks with vendor.
 Maintenance of Plant Normal,Emergency Lighting and Electrical Heat Tracing Systems.
 Prepare and monitoring the daily work schedule and Activities.
 Maintain the Substation log book to communicate the day to day activities to superiors.
 Operation and Monitoring Substation Electrical equipment and follows the Lockout & Tag out
procedure for Isolation & De Isolation activities in safe way.
 Maintenance & functional testing of Bridge crane and Hoist trolley up to 30 Ton.
 Conversant for shut down activities, Inspection, utilizing of spares for electrical projects.
6. Previous Employer : British Gas,India.
Position : Electrical Technician-Commissioning,Operation and Maintenance(Offshore)
Period : May 2006-November 2007
Plant : Tapti,Panna Platform,Mumbai High Offshore.
Job Responsibility:
 Testing & Commissioning and Maintenance of HV switch gear of 11 KV, 6.6KV, 3.3KV,0.415 KV with
including different type of Numerical Relays, Auxiliary equipment CT and PT.
 Commissioning and Maintenance of HV/ LV power and Distribution transformers up to 33 KV,
25MVA
 Commissioning and Maintenance of the ACB, VCB, Vacuum Contactors,Isolator,MCCB and HVAC
systems.
 Responsible for HV/MV Motor solo run activity, commissioning operation and associated loop checking,
protection system.
 Commissioning & Maintenance of AC & DC UPS systems, related Battery bank and Battery charger.
Page 5
 Maintenance and Commissioning of HV/LV Motor up to 4 MW and Auxiliary lube oil systems and
Preparation of Maintenance check list as per standard and vendor recommendation.
 Coordinate with operation and process team while commissioning the process plant.
 Installation and Maintenance of all Oil & Gas plant Electrical Equipment’s as per the hazardous area
classification and requirements.
 Light fitting installation, Maintenance and Trouble shooting of Industrial Lighting panels, Emergency lighting
panel and DC critical lightings.
 Commissioning of Electrical motor including No load test run as per client requirement.
 Maintenance and troubleshooting of 25 Ton overhead Crane.
 Maintenance and trouble shooting of VFD.
 Maintenance of Gas Turbine Generator upto 30 MVA with related auxillary equipments.
 Maintaining the Day by Day substation Operation & Maintenance activity Log book.
Computer Skills:
 Computer Knowledge –MS Office Word–2007,MS Excel.
 Schneider Electric for Integrated Protection And Control Systems (IPCS) for
Substation Monitoring.
Test Equipment Handled:
 Multi meter(fluke - V), 5KV Insulation tester (Megger-MIT520/2), Winding Resistance Tester
(Megger – MTO-210, Range-10A), CT & VT Analyser (Omicron- CPC - 100),Digital Low Resistance
Meter (Megger – DLRO 10X), Oil Test Kit ( Megger –FOSTER OTS60AF/2), Cable Fault locator
(Radiodetection-TX10 & RD 8000), Battery load test unit (Programma – TORKEL 840), Secondary
injection test kit (Omicron – CMC 356) & Primary Injection Test Kit (Megger).
Passport Details:
NO:M3518340 Issue date:17/11/2014 Expire date:16/11/2024 Issued from: Madurai
Professional Qualification:
DIPLOMA (DEEE)
STATE BOARD
OF
TECHNICAL
EDUCATION
2003 TO 2006
( 3 YEARS )
FIRST CLASS
INDUSTRIAL
ELECTRICAL&
ELECRONICS
SYSTEMS.
Training / Courses Acquired:
No
Training / Course
Name
Provided By Purpose / Covered Area
Durati
on
1
Competent Electrical
Person(CEP)
SHELL,BOROUGE and
ALHOSN GAS
Electrical Lockout- Tag out
Procedure Implementation
3 Days
2
Safe Use Of Electricity in
Potentially Explosive
Environment(EX)
SHELL
Safe use of electrical
equipments in hazardous
areas.
3 Days
3 BOSIET Courses
Hindustan Maritime
Training,Chennai
Offshore Survival Trainings
13
Days
Page 6
4
H2S/BA,SCBA,NH15,Fire
Fighting and FirstAid
SHELL,ALHOSN GAS
Emergency Evacuation,Fire
Fighting and First aid.
3 Days
5 Permit To Work
SHELL,BOROUGE and
ALHOSN GAS
Permit to work procedure and
implementation
4 Days
6
ILM,ESP/ESR,Pride in
Production,Computer
Base Safety Training
SHELL
Basic Industrial Safety,Leadership
Qualities,Electrical safety
rules,procedures and pride for
production
13
Days
PERSONAL DETAILS:
Father's Name : E.Sudalaiyandi
Date of birth : 23 April 1985
Permanent address : 3/56A Kaspa east,South Karungulam & post,Tirunelveli District,
Tamilnadu, India- 627114.
Language known : English, Hindi and Tamil.
Gender : Male
Marital status : Single
Nationality : Indian
Declaration:-
I do here by declare that above mentioned fact are true and correct to the best of my knowledge
and belief.
Yours truly,
(Balasubramanian Sudalaiyandi)

More Related Content

What's hot

madhu resume for core companies
madhu resume for core companiesmadhu resume for core companies
madhu resume for core companies
bala madhu
 
electrical cv - BE
electrical cv - BEelectrical cv - BE
electrical cv - BE
mirza gulrez
 
SHAIK IRFAN VALI .... resume O&M
SHAIK IRFAN VALI .... resume O&MSHAIK IRFAN VALI .... resume O&M
SHAIK IRFAN VALI .... resume O&M
Irfan Vali
 
Engr. Ayaz Khan CV11 (1)
Engr.  Ayaz Khan CV11 (1)Engr.  Ayaz Khan CV11 (1)
Engr. Ayaz Khan CV11 (1)
Engr.ayaz khan
 
vijay new resume[1].DOC
vijay new resume[1].DOCvijay new resume[1].DOC
vijay new resume[1].DOC
Vijayakumar M
 
SHAIK IRFAN VALI ...resume Projects
SHAIK IRFAN VALI ...resume ProjectsSHAIK IRFAN VALI ...resume Projects
SHAIK IRFAN VALI ...resume Projects
Irfan Vali
 

What's hot (20)

Byjul rahman cv (updated)
Byjul rahman   cv (updated)Byjul rahman   cv (updated)
Byjul rahman cv (updated)
 
madhu resume for core companies
madhu resume for core companiesmadhu resume for core companies
madhu resume for core companies
 
RamCV1
RamCV1RamCV1
RamCV1
 
electrical cv - BE
electrical cv - BEelectrical cv - BE
electrical cv - BE
 
Resume
ResumeResume
Resume
 
ajit-cv-updated
ajit-cv-updatedajit-cv-updated
ajit-cv-updated
 
NAVNATH UPDATED CV
NAVNATH UPDATED CVNAVNATH UPDATED CV
NAVNATH UPDATED CV
 
electrician
electricianelectrician
electrician
 
SHAIK IRFAN VALI .... resume O&M
SHAIK IRFAN VALI .... resume O&MSHAIK IRFAN VALI .... resume O&M
SHAIK IRFAN VALI .... resume O&M
 
IRJET - Designing of 1 Phase 5KVA Servo Stabilizer with Isolation Transformer
IRJET - Designing of 1 Phase 5KVA Servo Stabilizer with Isolation TransformerIRJET - Designing of 1 Phase 5KVA Servo Stabilizer with Isolation Transformer
IRJET - Designing of 1 Phase 5KVA Servo Stabilizer with Isolation Transformer
 
Engr. Ayaz Khan CV11 (1)
Engr.  Ayaz Khan CV11 (1)Engr.  Ayaz Khan CV11 (1)
Engr. Ayaz Khan CV11 (1)
 
Elmer Lainez
Elmer LainezElmer Lainez
Elmer Lainez
 
UPDATED CV-1
UPDATED CV-1UPDATED CV-1
UPDATED CV-1
 
vijay new resume[1].DOC
vijay new resume[1].DOCvijay new resume[1].DOC
vijay new resume[1].DOC
 
SASIdharan p CV
SASIdharan p CVSASIdharan p CV
SASIdharan p CV
 
SHAIK IRFAN VALI ...resume Projects
SHAIK IRFAN VALI ...resume ProjectsSHAIK IRFAN VALI ...resume Projects
SHAIK IRFAN VALI ...resume Projects
 
Electrical Engineer
Electrical EngineerElectrical Engineer
Electrical Engineer
 
ajit-cv-2015
ajit-cv-2015ajit-cv-2015
ajit-cv-2015
 
Kumar RESUME
Kumar RESUMEKumar RESUME
Kumar RESUME
 
venkatCV
venkatCVvenkatCV
venkatCV
 

Viewers also liked (9)

Abb
AbbAbb
Abb
 
Knowledge Management Report On ABB Company.
Knowledge Management Report On ABB Company.Knowledge Management Report On ABB Company.
Knowledge Management Report On ABB Company.
 
Reference letter Kashif Khan ABB
Reference letter Kashif Khan ABBReference letter Kashif Khan ABB
Reference letter Kashif Khan ABB
 
Basic Troubleshooting Pwr Pt
Basic Troubleshooting Pwr PtBasic Troubleshooting Pwr Pt
Basic Troubleshooting Pwr Pt
 
Switchgear
SwitchgearSwitchgear
Switchgear
 
Switchgear presentation
Switchgear presentationSwitchgear presentation
Switchgear presentation
 
Switchgear presentation
Switchgear presentationSwitchgear presentation
Switchgear presentation
 
ABB-6 weeks industrial trng ppt.
ABB-6 weeks industrial trng ppt.ABB-6 weeks industrial trng ppt.
ABB-6 weeks industrial trng ppt.
 
Relay and switchgear protection
Relay and switchgear protectionRelay and switchgear protection
Relay and switchgear protection
 

Similar to bala.1

NESTOR-UPDATED-CV-1 ALEGA
NESTOR-UPDATED-CV-1 ALEGANESTOR-UPDATED-CV-1 ALEGA
NESTOR-UPDATED-CV-1 ALEGA
nestor alega
 
Graduate Electrical Engineer having 6.6 Years exprience in renewable energy &...
Graduate Electrical Engineer having 6.6 Years exprience in renewable energy &...Graduate Electrical Engineer having 6.6 Years exprience in renewable energy &...
Graduate Electrical Engineer having 6.6 Years exprience in renewable energy &...
Upendra Kumar Yadav
 
ELECHTRICAL TECHNICIAN RESUME (((((2016)))))
ELECHTRICAL  TECHNICIAN RESUME  (((((2016)))))ELECHTRICAL  TECHNICIAN RESUME  (((((2016)))))
ELECHTRICAL TECHNICIAN RESUME (((((2016)))))
MOHAMMAD KHALID MUSTAFA
 
MUHAMMAD NADEEM CVWITH PICTURE
MUHAMMAD NADEEM CVWITH PICTUREMUHAMMAD NADEEM CVWITH PICTURE
MUHAMMAD NADEEM CVWITH PICTURE
MUHAMMAD NADEEM
 
C18808 elc tech
C18808 elc techC18808 elc tech
C18808 elc tech
EDWIN S
 
ELECHTRICAL COMMISSIONING TECHNICIAN 2201622
ELECHTRICAL   COMMISSIONING  TECHNICIAN   2201622ELECHTRICAL   COMMISSIONING  TECHNICIAN   2201622
ELECHTRICAL COMMISSIONING TECHNICIAN 2201622
MOHAMMAD KHALID MUSTAFA
 
SHAIK IRFAN VALI resume (solar)
SHAIK IRFAN VALI  resume (solar)SHAIK IRFAN VALI  resume (solar)
SHAIK IRFAN VALI resume (solar)
Irfan Vali
 
RESUME_ ARULMANI-ELECTRICAL COMMISSIONING ENGINEER (1)
RESUME_ ARULMANI-ELECTRICAL COMMISSIONING ENGINEER (1)RESUME_ ARULMANI-ELECTRICAL COMMISSIONING ENGINEER (1)
RESUME_ ARULMANI-ELECTRICAL COMMISSIONING ENGINEER (1)
Arulmani Dhandabani
 

Similar to bala.1 (20)

NESTOR-UPDATED-CV-1 ALEGA
NESTOR-UPDATED-CV-1 ALEGANESTOR-UPDATED-CV-1 ALEGA
NESTOR-UPDATED-CV-1 ALEGA
 
Jose_Transmission_Engineer
Jose_Transmission_EngineerJose_Transmission_Engineer
Jose_Transmission_Engineer
 
Asim (maintenance)
Asim  (maintenance)Asim  (maintenance)
Asim (maintenance)
 
Cv
CvCv
Cv
 
Hari Maintenance
Hari MaintenanceHari Maintenance
Hari Maintenance
 
Hari Maintenance
Hari MaintenanceHari Maintenance
Hari Maintenance
 
Resume Francis
Resume FrancisResume Francis
Resume Francis
 
Graduate Electrical Engineer having 6.6 Years exprience in renewable energy &...
Graduate Electrical Engineer having 6.6 Years exprience in renewable energy &...Graduate Electrical Engineer having 6.6 Years exprience in renewable energy &...
Graduate Electrical Engineer having 6.6 Years exprience in renewable energy &...
 
Commission resume
Commission resumeCommission resume
Commission resume
 
ELECHTRICAL TECHNICIAN RESUME (((((2016)))))
ELECHTRICAL  TECHNICIAN RESUME  (((((2016)))))ELECHTRICAL  TECHNICIAN RESUME  (((((2016)))))
ELECHTRICAL TECHNICIAN RESUME (((((2016)))))
 
MUHAMMAD NADEEM CVWITH PICTURE
MUHAMMAD NADEEM CVWITH PICTUREMUHAMMAD NADEEM CVWITH PICTURE
MUHAMMAD NADEEM CVWITH PICTURE
 
Resume E&I Engineer
Resume E&I EngineerResume E&I Engineer
Resume E&I Engineer
 
C18808 elc tech
C18808 elc techC18808 elc tech
C18808 elc tech
 
CV Electrical Technician
CV Electrical TechnicianCV Electrical Technician
CV Electrical Technician
 
Tamil E&I Compex inspector
Tamil E&I Compex  inspectorTamil E&I Compex  inspector
Tamil E&I Compex inspector
 
ELECHTRICAL COMMISSIONING TECHNICIAN 2201622
ELECHTRICAL   COMMISSIONING  TECHNICIAN   2201622ELECHTRICAL   COMMISSIONING  TECHNICIAN   2201622
ELECHTRICAL COMMISSIONING TECHNICIAN 2201622
 
CV Nagashiva
CV Nagashiva CV Nagashiva
CV Nagashiva
 
SHAIK IRFAN VALI resume (solar)
SHAIK IRFAN VALI  resume (solar)SHAIK IRFAN VALI  resume (solar)
SHAIK IRFAN VALI resume (solar)
 
JAM_RESUME
JAM_RESUMEJAM_RESUME
JAM_RESUME
 
RESUME_ ARULMANI-ELECTRICAL COMMISSIONING ENGINEER (1)
RESUME_ ARULMANI-ELECTRICAL COMMISSIONING ENGINEER (1)RESUME_ ARULMANI-ELECTRICAL COMMISSIONING ENGINEER (1)
RESUME_ ARULMANI-ELECTRICAL COMMISSIONING ENGINEER (1)
 

bala.1

  • 1. Page 1 BALASUBRAMANIAN SUDALAIYANDI Email: sbsm1985@gmail.com Mobile: UAE: +971-501567803,INDIA: +91-7639795919 POST APPLIED FOR ELECTRICAL TECHNICIAN Carrier Objective: 8 Years’ experience in dynamic and challenging position in the field of Oil & Gas and Petrochemical plants as an Electrical Operation,Commissioning & Maintenance in a reputed organization to enhance my interpersonal skills and also use my knowledge at the best. Apart from the above, analyzing and solving critical problems in day by day work and interact with people of all professions with technical backgrounds. Key Area of Experience:  In-depth knowledge of electrical erection, commissioning, start up,operation and maintenance activity of Oil, Gas and Petrochemical field, Substations and control room Equipments and distribution.  Good knowledge in Maintenance activities of HV/LV Transformers, HV/LV Motors, HT/LV Switchgears, UPS systems, VFD panels,Diesel generator,HVAC,Electrical Heat Tracings and Plant lighting network.  Maintenance job Organization, plan, monitoring, general guidance & work direction to electrical team with safety procedure & formats. And completion of Maintenance activities as per planned time.  Substation Operation and Monitoring all Electrical Lockout-Tag out (LOTO), isolation and de- isolation activities in safe way.  Locate equipment or systems faults and operating irregularities by making the necessary diagnostically tests, measurements, Fault analyses, troubleshooting and good communication skills.  Preventive maintenance of Electrical equipment for hazardous and non-hazardous area classifications.  Conduct Tool box talk before start job regarding day By Day activities & plant emergenc y escape route.  Conversant with the principles, practices and testing tools used in electrical operation & maintenance  Carried out under the permit to work (PTW) system in Offshore Oil & Gas industry.  Comprehensive knowledge of new additional system/equipment installation with existing system, modification and related requirement preparation, scheme modification, protection and As-Built procedure.  Conversant with planning and completion maintenance activities as per planned time.  Lead and assure that on-site electrical activities including resource management, procedure development, schedule coordination, materials / tools / vendor support, system/equipment troubleshooting, and adjusting plan due to resource issues for a safe and efficient execution.  Plant and substation related all electrical equipments fault, irregular shutdown, parts failure and abnormality trouble shooting and attending the faults with in accepted time limit. Employment History: 1.Present Employer:Abudhabi Gas Development Company,[ALHOSN GAS],Abudhabi. Position : Electrical Maintenance Technician (Onshore) Period : March 2015- Present Plant : Shah Gas Plant,Shah site. Job Responsibility:  Responsible for Operation, maintenance and trouble shooting of all switchgear, transformer (power and distribution), HV/MV motors.  Maintenance of Up to 132/33KV,33/11KV ,11/0.415 KV switching system and associated transformer, protection relay, MCC, Lighting controls, Circuit breaker and related distribution system.  Operation and Maintenance of HV/ LV power and Distribution transformers up to 33 KV, 40 MVA.
  • 2. Page 2  Maintenance of Numerical relays (SIEMENS, ABB).  Operation, Testing & Maintenance of Electrical circuit Breakers like VCB, ACB and SF6 and Vacuum Contactor like insulation resistance, Contact resistance and breaker timing test .  Maintenance of HV and LV motors (UP to 12.5MW) including auxiliary pump motor at site.  Maintenance of MOV with the help of Instrument Personnel.  Maintenance of VFD drive panel as per manufacturer check list.  Maintenance of UPS and related Battery banks with vendor.  Maintenance and troubleshooting of Electrical Heat Tracing systems.  Prepare and monitoring the daily work schedule and Activities.  Maintain the Substation log book to communicate the day to day activities to superiors.  Prepare and submit the Maintenance activities check list and substation Monitoring check list.  Operation and Monitoring Substation Electrical equipment and follows the Lockout & Tag out procedure for Isolation & De Isolation activities in safe way.  Carrying out low and high voltage preventive maintenances of electrical equipments for hazardous and non- hazardous area. 2.Previous Employer: Abudhabi Polymers Company,[BOROUGE],Abudhabi. Position : Electrical Maintenance Technician (Onshore) Period : August 2013-August 2014 Plant : Borouge 1 & 2,Ruwais. Job Responsibility:  Responsible for Operation, maintenance and trouble shooting of all switchgear, transformer (power and distribution), HV/MV motors.  Maintenance of Up to 132/33KV,33/11KV ,11/3.3 KV,11/0.415 KV switching system and associated transformer, protection relay, MCC, Lighting controls, Circuit breaker and related distribution system.  Operation and Maintenance of HV/ LV power and Distribution transformers up to 33 KV, 40 MVA.  Operation & Maintenance of HV/LV Switch gear related Bus Duct.  Maintenance of Numerical relays (SIEMENs, ABB, Schneider and Areva MICOM series).  Operation, Testing & Maintenance of Electrical circuit Breakers like VCB, ACB and SF6 and Vacuum Contactor like insulation resistance, Contact resistance and breaker timing test.  Maintenance of HV and LV motors (UP to 12.5MW) including auxiliary pump motor at site.  Maintenance No load test run of Diesel Generator up to 1600 kVA for emergency power source.  Maintenance of VFD drive panel as per manufacturer check list.  Maintenance and Commissioning of UPS and related Battery banks with vendor.  Maintenance of Plant Normal and Emergency Lighting networks.  Maintenance and troubleshooting of Electrical Heat Tracing systems.  Maintenance of 220 VAC power socket and 415 VAC welding socket.  Prepare and monitoring the daily work schedule and Activities.  Maintain the Substation log book to communicate the day to day activities to superiors.  Prepare and submit the Maintenance activities check list and substation Monitoring check list.  Arranging temporary lighting system for Process and Mechanical jobs.  Operation and Monitoring Substation Electrical equipment and follows the Lockout & Tag out procedure for Isolation & De Isolation activities in safe way.  Operation, Monitoring & Fault analysis of Substation Electrical equipment through IPCS (Integrated Protection & control System.  Maintenance & functional testing of Bridge crane and Hoist trolley up to 50 Ton.  Maintenance of both HV and LV Capacitor banks.  Carrying out low and high voltage preventive maintenances of electrical equipments for hazardous and non- hazardous area.
  • 3. Page 3 3.Previous Employer : QATAR SHELL GTL,Qatar. Position : Electrical Technician- Commissioning,Operation and Maintenance(Onshore) Period : February 2011-April 2013 Plant : Pearl GTL,Ras Laffan. Job Responsibility:  Responsible for Commissioning, operation, maintenance and trouble shooting of all switchgear, transformer upto 30MVA(power and distribution), HV/MV motors (Up to 4MW).  Maintenance of Up to 33/6.6KV, 33/11KV,6.6/0.690KV switching system and associated transformer, protection relay, MCC, Lighting controls, Circuit breaker and related distribution system.  Testing & Commissioning and Maintenance of HV switch gear of 33KV,11KV, 6.6KV,3.3KV,0.690KV with including different type of Numerical Relays, Auxiliary equipment CT and PT.  Commissioning and Maintenance of the ACB, VCB, Vacuum Contactors,Isolator,MCCB and HVAC systems.  Commissioning & Maintenance of AC & DC UPS systems, related Battery bank and Battery charger.  Maintenance and Commissioning of HV/LV Motor up to 4 MW and Auxiliary lube oil systems and Preparation of Maintenance check list as per standard and vendor recommendation.  Commissioning of IRP panel (Interposing relay panel).  Coordinate with operation process team while commissioning and start up the process plant.  High voltage test for power cables, HV bus bars and HV Bus ducts.  Preparation of schedule for electrical system commissioning (Format wise) & executing as per plan.  Preparation of final as built drawing at site and coordinates with engineering department personnel.  Installation and Maintenance of all Oil & Gas plant Electrical Equipment’s as per the hazardous area classification and requirements.  Ability to read and understand all type of electrical drawings. Trouble shooting and repair and Maintain Electrical Equipment’s, Site Supervision of Plant Construction and commissioning activities.  Light fitting installation, Maintenance and Trouble shooting of Industrial Lighting panels, Emergency lighting panel ,DC critical lighting and Electrical Heat Tracing systems.  Commissioning of Electrical motor including No load test run as per client requirement.  Receive LOA,SFT,EPTW for HV electrical equipments from SAEP.  Responsible for HV/MV Motor solo run activity, commissioning operation and associated loop checking, protection system.  Maintenance and troubleshooting of 30 Ton EOT Crane.  Maintenance and trouble shooting of VSD microprocessor based AC thyristor drives.  Maintenance of Gas Turbine Generator up to 25 MVA with related auxillary equipments.  Preventive maintenance of Earthing and Cathodic Protection Transformers.  Maintenance of MOV with the help of Instrument Personnel.  Handle the tasks of generating plans for upgrading operation & maintenance and in documenting work policies.  Provide instructions in areas of testing and commissioning electrical equipment to the co-workers. 4. Previous Employer : Petrochemical Industries Company,Kuwait. Position : Electrician-Maintenance(Onshore) Period : August 2008-November 2010 Plant : PIC ,Shuaiba,Kuwait. Job Responsibility:  Responsible for Operation, maintenance and trouble shooting of all switchgear, transformer (power and distribution), HV/MV motors.  Maintenance of Up to 33KV,33/11KV ,11/3.3 KV,11/0.415 KV switching system and associated transformer, protection relay, MCC, Lighting controls, Circuit breaker and related distribution system.
  • 4. Page 4  Operation & Maintenance of HV/LV Switch gear related Bus Duct.  Operation, Testing & Maintenance of Electrical circuit Breakers like VCB, ACB and SF6 and Vacuum Contactor like insulation resistance, Contact resistance and breaker timing test .  Maintenance of HV and LV motors (UP to 4MW) including auxiliary pump motor at site.  Maintenance No load test run of Diesel Generator up to 1600 kVA for emergency power source.  Maintenance of VFD drive panel as per manufacturer check list.  Maintenance and Commissioning of UPS and related Battery banks with vendor.  Maintenance of Plant Normal and Emergency Lighting networks.  Prepare and monitoring the daily work schedule and Activities.  Maintain the Substation log book to communicate the day to day activities to superiors.  Operation and Monitoring Substation Electrical equipment and follows the Lockout & Tag out procedure for Isolation & De Isolation activities in safe way.  Maintenance & functional testing of Bridge crane and Hoist trolley up to 50 Ton.  Conversant for shut down activities, Inspection, utilizing of spares for electrical projects. 5. Previous Employer : Kuwait Oil Company,Kuwait. Position : Electrician-Maintenance(Onshore) Period : November 2007-March 2008 Plant : BS-131,Abdaly,Kuwait. Job Responsibility:  Maintenance of 33/11KV ,11/3.3 KV,11/0.415 KV switching system and associated transformer, protection relay, MCC, Lighting controls, Circuit breaker and related distribution system.  Operation, Testing & Maintenance of Electrical circuit Breakers like VCB, ACB and SF6 and Vacuum Contactor like insulation resistance, Contact resistance and breaker timing test.  Maintenance of HV and LV motors (UP to 4MW) including auxiliary pump motor at site.  Maintenance of VFD drive panel as per manufacturer check list.  Maintenance and Commissioning of UPS and related Battery banks with vendor.  Maintenance of Plant Normal,Emergency Lighting and Electrical Heat Tracing Systems.  Prepare and monitoring the daily work schedule and Activities.  Maintain the Substation log book to communicate the day to day activities to superiors.  Operation and Monitoring Substation Electrical equipment and follows the Lockout & Tag out procedure for Isolation & De Isolation activities in safe way.  Maintenance & functional testing of Bridge crane and Hoist trolley up to 30 Ton.  Conversant for shut down activities, Inspection, utilizing of spares for electrical projects. 6. Previous Employer : British Gas,India. Position : Electrical Technician-Commissioning,Operation and Maintenance(Offshore) Period : May 2006-November 2007 Plant : Tapti,Panna Platform,Mumbai High Offshore. Job Responsibility:  Testing & Commissioning and Maintenance of HV switch gear of 11 KV, 6.6KV, 3.3KV,0.415 KV with including different type of Numerical Relays, Auxiliary equipment CT and PT.  Commissioning and Maintenance of HV/ LV power and Distribution transformers up to 33 KV, 25MVA  Commissioning and Maintenance of the ACB, VCB, Vacuum Contactors,Isolator,MCCB and HVAC systems.  Responsible for HV/MV Motor solo run activity, commissioning operation and associated loop checking, protection system.  Commissioning & Maintenance of AC & DC UPS systems, related Battery bank and Battery charger.
  • 5. Page 5  Maintenance and Commissioning of HV/LV Motor up to 4 MW and Auxiliary lube oil systems and Preparation of Maintenance check list as per standard and vendor recommendation.  Coordinate with operation and process team while commissioning the process plant.  Installation and Maintenance of all Oil & Gas plant Electrical Equipment’s as per the hazardous area classification and requirements.  Light fitting installation, Maintenance and Trouble shooting of Industrial Lighting panels, Emergency lighting panel and DC critical lightings.  Commissioning of Electrical motor including No load test run as per client requirement.  Maintenance and troubleshooting of 25 Ton overhead Crane.  Maintenance and trouble shooting of VFD.  Maintenance of Gas Turbine Generator upto 30 MVA with related auxillary equipments.  Maintaining the Day by Day substation Operation & Maintenance activity Log book. Computer Skills:  Computer Knowledge –MS Office Word–2007,MS Excel.  Schneider Electric for Integrated Protection And Control Systems (IPCS) for Substation Monitoring. Test Equipment Handled:  Multi meter(fluke - V), 5KV Insulation tester (Megger-MIT520/2), Winding Resistance Tester (Megger – MTO-210, Range-10A), CT & VT Analyser (Omicron- CPC - 100),Digital Low Resistance Meter (Megger – DLRO 10X), Oil Test Kit ( Megger –FOSTER OTS60AF/2), Cable Fault locator (Radiodetection-TX10 & RD 8000), Battery load test unit (Programma – TORKEL 840), Secondary injection test kit (Omicron – CMC 356) & Primary Injection Test Kit (Megger). Passport Details: NO:M3518340 Issue date:17/11/2014 Expire date:16/11/2024 Issued from: Madurai Professional Qualification: DIPLOMA (DEEE) STATE BOARD OF TECHNICAL EDUCATION 2003 TO 2006 ( 3 YEARS ) FIRST CLASS INDUSTRIAL ELECTRICAL& ELECRONICS SYSTEMS. Training / Courses Acquired: No Training / Course Name Provided By Purpose / Covered Area Durati on 1 Competent Electrical Person(CEP) SHELL,BOROUGE and ALHOSN GAS Electrical Lockout- Tag out Procedure Implementation 3 Days 2 Safe Use Of Electricity in Potentially Explosive Environment(EX) SHELL Safe use of electrical equipments in hazardous areas. 3 Days 3 BOSIET Courses Hindustan Maritime Training,Chennai Offshore Survival Trainings 13 Days
  • 6. Page 6 4 H2S/BA,SCBA,NH15,Fire Fighting and FirstAid SHELL,ALHOSN GAS Emergency Evacuation,Fire Fighting and First aid. 3 Days 5 Permit To Work SHELL,BOROUGE and ALHOSN GAS Permit to work procedure and implementation 4 Days 6 ILM,ESP/ESR,Pride in Production,Computer Base Safety Training SHELL Basic Industrial Safety,Leadership Qualities,Electrical safety rules,procedures and pride for production 13 Days PERSONAL DETAILS: Father's Name : E.Sudalaiyandi Date of birth : 23 April 1985 Permanent address : 3/56A Kaspa east,South Karungulam & post,Tirunelveli District, Tamilnadu, India- 627114. Language known : English, Hindi and Tamil. Gender : Male Marital status : Single Nationality : Indian Declaration:- I do here by declare that above mentioned fact are true and correct to the best of my knowledge and belief. Yours truly, (Balasubramanian Sudalaiyandi)