1. YAHYA MOHAMMED AL-SALEMI
Birth date : 22-05-1978
Birth place : AL-QAFR -IBB
Current Address: SANA'A - ALA'ASBAHI, Yemen
Personnel Phone:00967 777006297
Company E-mail: bh.tr-inst2-elec@yemenlng.com
yahya.al-salemy@yemenlng.com
Personnel E-mail: eng.yahyasalemi@gmail.com
Objective To obtain a challenging and demanding job in LNG electrical training or electrical
engineering that will further enhance my knowledge and skills.
Professional
Experience
Electrical instructor in Yemen LNG training center at Yemen LNG Company
May 2014 - Present
 Coaching Yemen LNG new training batches. Preparing of electrical
training courses, teaching plans and Assessments via LNG training
program which divided into three parts (common course, specific course,
and on job training).
 Preparing of electrical training courses , teaching plans and
assessments.
 Teaching electrical safety courses for each YLNG staff.
 Conducting of electrical authorization courses for staff who working with
a live electricity.
 Carrying out of electrical technical courses which requested from
operation department for electrical staff.
. Electrical specialist at Yemen LNG Company April 2006 - May 2014 (8
years 2 months)
• 6 years of experience for commissioning, start up, maintenance, and
troubleshooting of the YLNG electrical equipment, and repairing
electrical faulty parts and equipment in YLNG electrical workshop.
• 2 years of training for gas and oil industry during YLNG plant
established in (YLNG training center, Total Yemen, Total Syria and DEZ
Gas Syria.).
Electrical and HVAC engineer- Yemen telecom corp., Yemen, Amran, Apr
2005- Apr 2006
Electrical engineer in power section, supply electrical power to the new mobile
stations and centrals and carry out maintenance for (generators, and UPS
systems) as well as operate and maintain HVAC system for telecom centrals
and mobile stations.

2. Electrical engineer
Amran cement plant , Yemen, Amran , Apr 2004 - Apr 2005
Commissioning of the electrical equipment for a new modified line in Amran
cement plant . Working with the operation team in CCR as electrical team
leader.
Education
Training
Certifications
Electrical engineering, Bachelor, power and control, Jan 1998 - Nov 2003
Homs , Syria
YLNG gas and oil industry, Diploma, Apr 2006 – Oct 2008
• 2 years of training for gas and oil industry VIA Yemen LNG (Total)
training program in (YLNG training center, Total Yemen, Total Syria and
DEZ Gas Syria. (Certified)
• 6 months of specific electrical training of oil and gas power plant.
• 11 months of participation in pre-commissioning and commissioning
Yemen LNG in BALHAF. (Certified)
• Attending UPS training conducted by CHLORIDE Company. (Certified)
• Attending HV Switchgear training conducted by Schneider Company.
(Certified)
• Attending PDCS theoretical and practical training conducted by
Schneider Company. (Certified)
• Attending 400V MNS Switchboards training conducted by ABB
Company. (Certified)
• 6 years working in Yemen LNG in Maintenance-electrical department.
Electrical engineering, Bachelor, power and control, Nov 2003
Homs , Syria
LNG Diploma
Yemen LNG Company October 2008
LNG pre-commissioning and commissioning
Technip December 2009
UPS training
Emerson Network Power February 2014
HV Switchgear
Schneider Electric April 2010
PDCS theoretical and practical
Schneider Electric April 2010
400V Switchboards
ABB July 2010
In addition of many Local Technical certificates.

3. Skills Familiarization and Knowledge:
General Electrical Power Systems
Understanding electrical principles.
Familiarization of electrical fundamentals.
Academic Knowledge on electrical aspects and concepts.
General Electrical Power Networks (Generators-Turbines-Transformers-
Switchgears, etc.)
Understanding Generators-Turbines-Transformers-Switchgears-Consumers,
structure and functionality.
Practical work experience on electrical power networks: Generators-Turbines-
Transformers-Switchgears-Consumers.
Practical analyzing of electrical power networks: Generators-Turbines-
Transformers-Switchgears-Consumers.
ANSI Protective Relays Criteria
Understanding ANSI protection principle.
Installing ANSI protective relays and their measurement and sensing
instruments: (CTs & VTs).
Operating, monitoring, and data acquisition and analyzing of ANSI smart
relays ex: SEPAM.
Power Distribution Control System PDCS
Operating, monitoring, and data acquisition and analyzing of PDCS.
Understanding the functionality of Load Shedding of PDCS.
Surfing the whole electrical network via PDCS and ability for maneuvering and
trips investigating.
Electrical Motors and Other Electrical Loads
Installing, powering, and starting types of electrical motors.
Testing, overhauling, and troubleshooting for electrical motors including
replacing bearings and spare parts.
Familiarization of operating and maintenance for electrical loads ex: heaters,
lightings, distribution boards…etc.
Uninterruptible power systems-UPS.
Operating AC/DC UPS.
Maintenance and troubleshooting for AC/DC UPS.
Load calculating and load discharge test, and replacing AC/DC UPS’s
capacitors’ banks.
Installing, replacing, and maintenance for AC/DC UPS’s batteries, either
sealed or acid electrolyte types.
Electrical distribution and protection discrimination.
Carrying out preventive maintenance for distribution boards according to their
functions.

4. Making functional tests for electrical protection devices: overload, earth
leakage relays…etc.
Distinguishing trips causes technically during troubleshooting.
Electrical measurement devices.
Experience of using electrical measurement devices: DMM, Clamp on meter,
Tachometer, IR meter…etc.
Ability to maintain and save electrical measurement devices, and calibrating
them.
Electrical test equipment for different electrical installations.
Experience of using many electrical HV & LV test equipment like:
HV & LV MEGGER.
Primary & secondary injection current testers.
Earth fault tester.
Power cable fault locator.
Earthling resistance measurement device.
Absence of HV tester.
Transformer oil dielectric tester.
HV smart relay-SEPAM- software functional test.
Appliances devices tester.
Electrical workshop equipment and test bench
Residual current circuit breaker tester.
And so many miscellaneous devices and equipment.
Electrical lightings for different purposes.
Experience of fluorescent lighting fixtures including Ex. Explosion proof
lighting types.
Experience of flood lighting and street lighting installation.
Lining up and following lighting circuits on the field for maintenance or
troubleshooting.
Experience with battery backup lightings and their ballasts.
Ability to provide different types of portable lightings for especial purposes and
specific areas.
Experience of providing different voltage of lighting Ex. Transformers.
Routine preventive maintenance for all of electrical system and
installation.
Experience of ding 3 years, 1 year, 6 months, and 3 months’ preventive
maintenance
Understanding and carrying out preventive maintenance according to their
procedures and method statements.
5 years of experience of different types of preventive maintenance on all
electrical systems and electrical installations.
Electrical power and control drawings.
Reading, understanding, and dealing with:
Single line diagram.
Schematic diagram.
Power circuit drawing.
Control circuit drawing.
Mimic diagram.

5. Cathodic Protection System.
Understanding the principle of cathodic protection.
Experience of immersed current system of cahthodic protection.
Working on pipeline cathodic protection system.
Operation and maintenance of immersed current power supply and its
transformer of cathodic protection system.
Particular Technical Work Achievements:
Participating with vendor of SDMO emergency diesel generator as
following:
Pre-commissioning check and test activities.
Commissioning check and test activities.
Troubleshooting and punch list clarification after commissioning.
Cranking the MTU diesel engine safely.
Lining up the engine auxiliaries: oil coolant system, water coolant system, fuel
system, and ventilation system.
No-load test for the generator set.
Load test for the generator set.
Testing the standby mode successfully of the generator set.
Putting the emergency SDMO generator in service successfully.
Participating with vendor of CHLORIDE UPS system as following:
Checking the physical status of the AC & DC UPS installation: control panel,
distribution panel, battery room, override mechanism, and measurement
sensors.
Connecting AC & DC UPS communication card to CHLORIDE software and
downloading its program and events history.
Correcting several data information like: date, time, digital mimic display, and
comparing digital measurement values with the physical measurement values.
Preparing AC & DC UPS for the battery discharge test by switching it from
service mode to test mode, and then to maintenance mode.
Following the method statement document to complete the remaining steps,
and the connecting the portable load test bank to the battery output terminals.
Calculating the consumed power and comparing it with the batteries autonomy
to verify the batteries performance.
Visually check for the charger, inverter, capacitors, and the static switch.
Replacing capacitors bank due to end or their lifetime.
Participating with vendor of LCDC pipeline protection as following:
Yemen LNG gas plant in Balhaf is fed from SAFER oil plant in MAEIB, via
320Km length of pipeline.
This pipeline is divided into 10 ball valve station BVS, each BVS is installed
after 32Km from the previous BVS.
Each BVS is powered electrically by thermal electric generator TEG, by
generating electrical power via burning natural gas.
Generated electrical power supplies each BVS loads like: control system,
SCADA system, CCTV, cathodic protection…etc.
On March 2013 a decision was made to install an anti-intrusion detecting
system by using the optical fiber as a sensor to give information to be processed
and analyzed digitally.
Participated in the installation and commissioning of this project, because the
pipeline

6. Safety: Overall safety training covering oil and gas industrial environment.
Firefighting theoretical and practical training.
Hazards awareness in oil and gas industrial environment.
Electrical safety training for authorization.
First aid courses.
Authorization for electrical safe isolation from low voltage up to 6.6KV.
Respecting safety aspects for preparation and safety toolbox meeting period
starting jobs.